- 08 Jun, 2016 40 commits
-
-
Arnd Bergmann authored
commit 6979cd54 upstream. A recent cleanup removed the only user of the 'kms' variable in msm_preclose(), causing a harmless compiler warning: drivers/gpu/drm/msm/msm_drv.c: In function 'msm_preclose': drivers/gpu/drm/msm/msm_drv.c:468:18: error: unused variable 'kms' [-Werror=unused-variable] This removes the variable as well. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 4016260b ("drm/msm: fix bug after preclose removal") Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Chinner authored
commit 7d3aa7fe upstream. We don't write back stale inodes so we should skip them in xfs_iflush_cluster, too. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dave Chinner authored
commit 51b07f30 upstream. Some careless idiot(*) wrote crap code in commit 1a3e8f3d ("xfs: convert inode cache lookups to use RCU locking") back in late 2010, and so xfs_iflush_cluster checks the wrong inode for whether it is still valid under RCU protection. Fix it to lock and check the correct inode. (*) Careless-idiot: Dave Chinner <dchinner@redhat.com> Discovered-by:
-
Dave Chinner authored
commit b1438f47 upstream. When a failure due to an inode buffer occurs, the error handling fails to abort the inode writeback correctly. This can result in the inode being reclaimed whilst still in the AIL, leading to use-after-free situations as well as filesystems that cannot be unmounted as the inode log items left in the AIL never get removed. Fix this by ensuring fatal errors from xfs_imap_to_bp() result in the inode flush being aborted correctly. Reported-by:
Shyam Kaushik <shyam@zadarastorage.com> Diagnosed-by:
-
Dave Chinner authored
commit 8179c036 upstream. Joe Lawrence reported a list_add corruption with 4.6-rc1 when testing some custom md administration code that made it's own block device nodes for the md array. The simple test loop of: for i in {0..100}; do mknod --mode=0600 $tmp/tmp_node b $MAJOR $MINOR mdadm --detail --export $tmp/tmp_node > /dev/null rm -f $tmp/tmp_node done Would produce this warning in bd_acquire() when mdadm opened the device node: list_add double add: new=ffff88043831c7b8, prev=ffff8804380287d8, next=ffff88043831c7b8. And then produce this from bd_forget from kdevtmpfs evicting a block dev inode: list_del corruption. prev->next should be ffff8800bb83eb10, but was ffff88043831c7b8 This is a regression caused by commit c19b3b05 ("xfs: mode di_mode to vfs inode"). The issue is that xfs_inactive() frees the unlinked inode, and the above commit meant that this freeing zeroed the mode in the struct inode. The problem is that after evict() has called ->evict_inode, it expects the i_mode to be intact so that it can call bd_forget() or cd_forget() to drop the reference to the block device inode attached to the XFS inode. In reality, the only thing we do in xfs_fs_evict_inode() that is not generic is call xfs_inactive(). We can move the xfs_inactive() call to xfs_fs_destroy_inode() without any problems at all, and this will leave the VFS inode intact until it is completely done with it. So, remove xfs_fs_evict_inode(), and do the work it used to do in ->destroy_inode instead. Reported-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
-
Dave Chinner authored
commit ad747e3b upstream. Commit 96f859d5 ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") allowed the freelist to use the empty slot at the end of the freelist on 64 bit systems that was not being used due to sizeof() rounding up the structure size. This has caused versions of xfs_repair prior to 4.5.0 (which also has the fix) to report this as a corruption once the filesystem has been grown. Older kernels can also have problems (seen from a whacky container/vm management environment) mounting filesystems grown on a system with a newer kernel than the vm/container it is deployed on. To avoid this problem, change the initial free list indexes not to wrap across the end of the AGFL, hence avoiding the initialisation of agf_fllast to the last index in the AGFL. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
-
Eric Sandeen authored
commit d0a58e83 upstream. Today, a kernel which refuses to mount a filesystem read-write due to unknown ro-compat features can still transition to read-write via the remount path. The old kernel is most likely none the wiser, because it's unaware of the new feature, and isn't using it. However, writing to the filesystem may well corrupt metadata related to that new feature, and moving to a newer kernel which understand the feature will have problems. Right now the only ro-compat feature we have is the free inode btree, which showed up in v3.16. It would be good to push this back to all the active stable kernels, I think, so that if anyone is using newer mkfs (which enables the finobt feature) with older kernel releases, they'll be protected. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
-
Arnd Bergmann authored
commit c87bf431 upstream. Enabling CONFIG_GCOV_PROFILE_ALL produces us a lot of warnings like lib/lz4/lz4hc_compress.c: In function 'lz4_compresshcctx': lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1504 bytes is larger than 1024 bytes [-Wframe-larger-than=] After some investigation, I found that this behavior started with gcc-4.9, and opened https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69702. A suggested workaround for it is to use the -fno-tree-loop-im flag that turns off one of the optimization stages in gcc, so the code runs a little slower but does not use excessive amounts of stack. We could make this conditional on the gcc version, but I could not find an easy way to do this in Kbuild and the benefit would be fairly small, given that most of the gcc version in production are affected now. I'm marking this for 'stable' backports because it addresses a bug with code generation in gcc that exists in all kernel versions with the affected gcc releases. Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit 0798d3c0 upstream. If page_move_anon_rmap() is refiling a pmd-splitted THP mapped in a tail page from a pte, the "address" must be THP aligned in order for the page->index bugcheck to pass in the CONFIG_DEBUG_VM=y builds. Link: http://lkml.kernel.org/r/1464253620-106404-1-git-send-email-kirill.shutemov@linux.intel.com Fixes: 6d0a07ed ("mm: thp: calculate the mapcount correctly for THP pages during WP faults") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Srinivas Pandruvada authored
commit 65a9f31c upstream. After commit 21a59991 ("scripts/package/Makefile: rpmbuild is needed for rpm targets"), it is no longer possible to specify RPMOPTS. For example, we can no longer able to control _topdir using the following make command. make RPMOPTS="--define '_topdir /home/xyz/workspace/'" binrpm-pkg Fixes: 21a59991 ("scripts/package/Makefile: rpmbuild is needed for rpm targets") Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 3017cd63 upstream. With netconsole (at least) the pr_err("... disablingn") call can recurse back into the dma-debug code, where it'll try to grab free_entries_lock again. Avoid the problem by doing the printk after dropping the lock. Link: http://lkml.kernel.org/r/1463678421-18683-1-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 3a17fb32 upstream. Grygorii Strashko reports: The PM runtime will be left disabled for the device if its .suspend_late() callback fails and async suspend is not allowed for this device. In this case device will not be added in dpm_late_early_list and dpm_resume_early() will ignore this device, as result PM runtime will be disabled for it forever (side effect: after 8 subsequent failures for the same device the PM runtime will be reenabled due to disable_depth overflow). To fix this problem, add devices to dpm_late_early_list regardless of whether or not device_suspend_late() returns errors for them. That will ensure failures in there to be handled consistently for all devices regardless of their async suspend/resume status. Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Weston Andros Adamson authored
commit ade8febd upstream. Since the patch "NFS: Allow multiple commit requests in flight per file" we can run multiple simultaneous commits on the same inode. This introduced a race over collecting pages to commit that made it possible to call nfs_init_commit() with an empty list - which causes crashes like the one below. The fix is to catch this race and avoid calling nfs_init_commit and initiate_commit when there is no work to do. Here is the crash: [600522.076832] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [600522.078475] IP: [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs] [600522.078745] PGD 4272b1067 PUD 4272cb067 PMD 0 [600522.078972] Oops: 0000 [#1] SMP [600522.079204] Modules linked in: nfsv3 nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache dcdbas ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw vmw_vsock_vmci_transport vsock bonding ipmi_devintf ipmi_msghandler coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ppdev vmw_balloon parport_pc parport acpi_cpufreq vmw_vmci i2c_piix4 shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c vmwgfx drm_kms_helper ttm drm crc32c_intel serio_raw vmxnet3 [600522.081380] vmw_pvscsi ata_generic pata_acpi [600522.081809] CPU: 3 PID: 15667 Comm: /usr/bin/python Not tainted 4.1.9-100.pd.88.el7.x86_64 #1 [600522.082281] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2014 [600522.082814] task: ffff8800bbbfa780 ti: ffff88042ae84000 task.ti: ffff88042ae84000 [600522.083378] RIP: 0010:[<ffffffffa0479e72>] [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs] [600522.083973] RSP: 0018:ffff88042ae87438 EFLAGS: 00010246 [600522.084571] RAX: 0000000000000000 RBX: ffff880003485e40 RCX: ffff88042ae87588 [600522.085188] RDX: 0000000000000000 RSI: ffff88042ae874b0 RDI: ffff880003485e40 [600522.085756] RBP: ffff88042ae87448 R08: ffff880003486010 R09: ffff88042ae874b0 [600522.086332] R10: 0000000000000000 R11: 0000000000000005 R12: ffff88042ae872d0 [600522.086905] R13: ffff88042ae874b0 R14: ffff880003485e40 R15: ffff88042704c840 [600522.087484] FS: 00007f4728ff2740(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000 [600522.088070] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [600522.088663] CR2: 0000000000000040 CR3: 000000042b6aa000 CR4: 00000000001406e0 [600522.089327] Stack: [600522.089926] 0000000000000001 ffff88042ae87588 ffff88042ae874f8 ffffffffa04f09fa [600522.090549] 0000000000017840 0000000000017840 ffff88042ae87588 ffff8803258d9930 [600522.091169] ffff88042ae87578 ffffffffa0563d80 0000000000000000 ffff88042704c840 [600522.091789] Call Trace: [600522.092420] [<ffffffffa04f09fa>] pnfs_generic_commit_pagelist+0x1da/0x320 [nfsv4] [600522.093052] [<ffffffffa0563d80>] ? ff_layout_commit_prepare_v3+0x30/0x30 [nfs_layout_flexfiles] [600522.093696] [<ffffffffa0562645>] ff_layout_commit_pagelist+0x15/0x20 [nfs_layout_flexfiles] [600522.094359] [<ffffffffa047bc78>] nfs_generic_commit_list+0xe8/0x120 [nfs] [600522.095032] [<ffffffffa047bd6a>] nfs_commit_inode+0xba/0x110 [nfs] [600522.095719] [<ffffffffa046ac54>] nfs_release_page+0x44/0xd0 [nfs] [600522.096410] [<ffffffff811a8122>] try_to_release_page+0x32/0x50 [600522.097109] [<ffffffff811bd4f1>] shrink_page_list+0x961/0xb30 [600522.097812] [<ffffffff811bdced>] shrink_inactive_list+0x1cd/0x550 [600522.098530] [<ffffffff811bea65>] shrink_lruvec+0x635/0x840 [600522.099250] [<ffffffff811bed60>] shrink_zone+0xf0/0x2f0 [600522.099974] [<ffffffff811bf312>] do_try_to_free_pages+0x192/0x470 [600522.100709] [<ffffffff811bf6ca>] try_to_free_pages+0xda/0x170 [600522.101464] [<ffffffff811b2198>] __alloc_pages_nodemask+0x588/0x970 [600522.102235] [<ffffffff811fbbd5>] alloc_pages_vma+0xb5/0x230 [600522.103000] [<ffffffff813a1589>] ? cpumask_any_but+0x39/0x50 [600522.103774] [<ffffffff811d6115>] wp_page_copy.isra.55+0x95/0x490 [600522.104558] [<ffffffff810e3438>] ? __wake_up+0x48/0x60 [600522.105357] [<ffffffff811d7d3b>] do_wp_page+0xab/0x4f0 [600522.106137] [<ffffffff810a1bbb>] ? release_task+0x36b/0x470 [600522.106902] [<ffffffff8126dbd7>] ? eventfd_ctx_read+0x67/0x1c0 [600522.107659] [<ffffffff811da2a8>] handle_mm_fault+0xc78/0x1900 [600522.108431] [<ffffffff81067ef1>] __do_page_fault+0x181/0x420 [600522.109173] [<ffffffff811446a6>] ? __audit_syscall_exit+0x1e6/0x280 [600522.109893] [<ffffffff810681c0>] do_page_fault+0x30/0x80 [600522.110594] [<ffffffff81024f36>] ? syscall_trace_leave+0xc6/0x120 [600522.111288] [<ffffffff81790a58>] page_fault+0x28/0x30 [600522.111947] Code: 5d c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 4c 8d 87 d0 01 00 00 48 89 e5 53 48 89 fb 48 83 ec 08 4c 8b 0e 49 8b 41 18 4c 39 ce <48> 8b 40 40 4c 8b 50 30 74 24 48 8b 87 d0 01 00 00 48 8b 7e 08 [600522.113343] RIP [<ffffffffa0479e72>] nfs_init_commit+0x22/0x130 [nfs] [600522.114003] RSP <ffff88042ae87438> [600522.114636] CR2: 0000000000000040 Fixes: af7cf057 (NFS: Allow multiple commit requests in flight per file) Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Nicolai Stange authored
commit 935244cd upstream. Currently, in ext4_mb_init(), there's a loop like the following: do { ... offset += 1 << (sb->s_blocksize_bits - i); i++; } while (i <= sb->s_blocksize_bits + 1); Note that the updated offset is used in the loop's next iteration only. However, at the last iteration, that is at i == sb->s_blocksize_bits + 1, the shift count becomes equal to (unsigned)-1 > 31 (c.f. C99 6.5.7(3)) and UBSAN reports UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2621:15 shift exponent 4294967295 is too large for 32-bit type 'int' [...] Call Trace: [<ffffffff818c4d25>] dump_stack+0xbc/0x117 [<ffffffff818c4c69>] ? _atomic_dec_and_lock+0x169/0x169 [<ffffffff819411ab>] ubsan_epilogue+0xd/0x4e [<ffffffff81941cac>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254 [<ffffffff81941ab1>] ? __ubsan_handle_load_invalid_value+0x158/0x158 [<ffffffff814b6dc1>] ? kmem_cache_alloc+0x101/0x390 [<ffffffff816fc13b>] ? ext4_mb_init+0x13b/0xfd0 [<ffffffff814293c7>] ? create_cache+0x57/0x1f0 [<ffffffff8142948a>] ? create_cache+0x11a/0x1f0 [<ffffffff821c2168>] ? mutex_lock+0x38/0x60 [<ffffffff821c23ab>] ? mutex_unlock+0x1b/0x50 [<ffffffff814c26ab>] ? put_online_mems+0x5b/0xc0 [<ffffffff81429677>] ? kmem_cache_create+0x117/0x2c0 [<ffffffff816fcc49>] ext4_mb_init+0xc49/0xfd0 [...] Observe that the mentioned shift exponent, 4294967295, equals (unsigned)-1. Unless compilers start to do some fancy transformations (which at least GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the such calculated value of offset is never used again. Silence UBSAN by introducing another variable, offset_incr, holding the next increment to apply to offset and adjust that one by right shifting it by one position per loop iteration. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Nicolai Stange authored
commit b5cb316c upstream. Currently, in mb_find_order_for_block(), there's a loop like the following: while (order <= e4b->bd_blkbits + 1) { ... bb += 1 << (e4b->bd_blkbits - order); } Note that the updated bb is used in the loop's next iteration only. However, at the last iteration, that is at order == e4b->bd_blkbits + 1, the shift count becomes negative (c.f. C99 6.5.7(3)) and UBSAN reports UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1281:11 shift exponent -1 is negative [...] Call Trace: [<ffffffff818c4d35>] dump_stack+0xbc/0x117 [<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169 [<ffffffff819411bb>] ubsan_epilogue+0xd/0x4e [<ffffffff81941cbc>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254 [<ffffffff81941ac1>] ? __ubsan_handle_load_invalid_value+0x158/0x158 [<ffffffff816e93a0>] ? ext4_mb_generate_from_pa+0x590/0x590 [<ffffffff816502c8>] ? ext4_read_block_bitmap_nowait+0x598/0xe80 [<ffffffff816e7b7e>] mb_find_order_for_block+0x1ce/0x240 [...] Unless compilers start to do some fancy transformations (which at least GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the such calculated value of bb is never used again. Silence UBSAN by introducing another variable, bb_incr, holding the next increment to apply to bb and adjust that one by right shifting it by one position per loop iteration. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161Signed-off-by:
-
Jan Kara authored
commit 74177f55 upstream. When filesystem is corrupted in the right way, it can happen ext4_mark_iloc_dirty() in ext4_orphan_add() returns error and we subsequently remove inode from the in-memory orphan list. However this deletion is done with list_del(&EXT4_I(inode)->i_orphan) and thus we leave i_orphan list_head with a stale content. Later we can look at this content causing list corruption, oops, or other issues. The reported trace looked like: WARNING: CPU: 0 PID: 46 at lib/list_debug.c:53 __list_del_entry+0x6b/0x100() list_del corruption, 0000000061c1d6e0->next is LIST_POISON1 0000000000100100) CPU: 0 PID: 46 Comm: ext4.exe Not tainted 4.1.0-rc4+ #250 Stack: 60462947 62219960 602ede24 62219960 602ede24 603ca293 622198f0 602f02eb 62219950 6002c12c 62219900 601b4d6b Call Trace: [<6005769c>] ? vprintk_emit+0x2dc/0x5c0 [<602ede24>] ? printk+0x0/0x94 [<600190bc>] show_stack+0xdc/0x1a0 [<602ede24>] ? printk+0x0/0x94 [<602ede24>] ? printk+0x0/0x94 [<602f02eb>] dump_stack+0x2a/0x2c [<6002c12c>] warn_slowpath_common+0x9c/0xf0 [<601b4d6b>] ? __list_del_entry+0x6b/0x100 [<6002c254>] warn_slowpath_fmt+0x94/0xa0 [<602f4d09>] ? __mutex_lock_slowpath+0x239/0x3a0 [<6002c1c0>] ? warn_slowpath_fmt+0x0/0xa0 [<60023ebf>] ? set_signals+0x3f/0x50 [<600a205a>] ? kmem_cache_free+0x10a/0x180 [<602f4e88>] ? mutex_lock+0x18/0x30 [<601b4d6b>] __list_del_entry+0x6b/0x100 [<601177ec>] ext4_orphan_del+0x22c/0x2f0 [<6012f27c>] ? __ext4_journal_start_sb+0x2c/0xa0 [<6010b973>] ? ext4_truncate+0x383/0x390 [<6010bc8b>] ext4_write_begin+0x30b/0x4b0 [<6001bb50>] ? copy_from_user+0x0/0xb0 [<601aa840>] ? iov_iter_fault_in_readable+0xa0/0xc0 [<60072c4f>] generic_perform_write+0xaf/0x1e0 [<600c4166>] ? file_update_time+0x46/0x110 [<60072f0f>] __generic_file_write_iter+0x18f/0x1b0 [<6010030f>] ext4_file_write_iter+0x15f/0x470 [<60094e10>] ? unlink_file_vma+0x0/0x70 [<6009b180>] ? unlink_anon_vmas+0x0/0x260 [<6008f169>] ? free_pgtables+0xb9/0x100 [<600a6030>] __vfs_write+0xb0/0x130 [<600a61d5>] vfs_write+0xa5/0x170 [<600a63d6>] SyS_write+0x56/0xe0 [<6029fcb0>] ? __libc_waitpid+0x0/0xa0 [<6001b698>] handle_syscall+0x68/0x90 [<6002633d>] userspace+0x4fd/0x600 [<6002274f>] ? save_registers+0x1f/0x40 [<60028bd7>] ? arch_prctl+0x177/0x1b0 [<60017bd5>] fork_handler+0x85/0x90 Fix the problem by using list_del_init() as we always should with i_orphan list. Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Seth Forshee authored
commit ff0bc084 upstream. A failed call to dqget() returns an ERR_PTR() and not null. Fix the check in ext4_ioctl_setproject() to handle this correctly. Fixes: 9b7365fc ("ext4: add FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support") Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Theodore Ts'o authored
commit 7827a7f6 upstream. Instead of just printing warning messages, if the orphan list is corrupted, declare the file system is corrupted. If there are any reserved inodes in the orphaned inode list, declare the file system corrupted and stop right away to avoid doing more potential damage to the file system. Signed-off-by:
-
Theodore Ts'o authored
commit c9eb13a9 upstream. If the orphaned inode list contains inode #5, ext4_iget() returns a bad inode (since the bootloader inode should never be referenced directly). Because of the bad inode, we end up processing the inode repeatedly and this hangs the machine. This can be reproduced via: mke2fs -t ext4 /tmp/foo.img 100 debugfs -w -R "ssv last_orphan 5" /tmp/foo.img mount -o loop /tmp/foo.img /mnt (But don't do this if you are using an unpatched kernel if you care about the system staying functional. :-) This bug was found by the port of American Fuzzy Lop into the kernel to find file system problems[1]. (Since it *only* happens if inode #5 shows up on the orphan list --- 3, 7, 8, etc. won't do it, it's not surprising that AFL needed two hours before it found it.) [1] http://events.linuxfoundation.org/sites/events/files/slides/AFL%20filesystem%20fuzzing%2C%20Vault%202016_0.pdf Reported by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
Jan Kara authored
commit 06bd3c36 upstream. Huang has reported that in his powerfail testing he is seeing stale block contents in some of recently allocated blocks although he mounts ext4 in data=ordered mode. After some investigation I have found out that indeed when delayed allocation is used, we don't add inode to transaction's list of inodes needing flushing before commit. Originally we were doing that but commit f3b59291 removed the logic with a flawed argument that it is not needed. The problem is that although for delayed allocated blocks we write their contents immediately after allocating them, there is no guarantee that the IO scheduler or device doesn't reorder things and thus transaction allocating blocks and attaching them to inode can reach stable storage before actual block contents. Actually whenever we attach freshly allocated blocks to inode using a written extent, we should add inode to transaction's ordered inode list to make sure we properly wait for block contents to be written before committing the transaction. So that is what we do in this patch. This also handles other cases where stale data exposure was possible - like filling hole via mmap in data=ordered,nodelalloc mode. The only exception to the above rule are extending direct IO writes where blkdev_direct_IO() waits for IO to complete before increasing i_size and thus stale data exposure is not possible. For now we don't complicate the code with optimizing this special case since the overhead is pretty low. In case this is observed to be a performance problem we can always handle it using a special flag to ext4_map_blocks(). Fixes: f3b59291Reported-by:
"HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Tested-by:
-
Ville Syrjälä authored
commit 9f6151c9 upstream. Pass the current crtc state, not the old crtc state, to the .update_plane() hook. Noticed on BSW when PRIMSIZE was getting programmed to a stale value which produced utter garbage on screen eg. wwhen going from 1920x1080 to 1024x768. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: a758e684 ("drm/i915: Do not use commit_plane for sprite planes.") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Philipp Zabel authored
commit 310944d1 upstream. The component master driver imx-drm-core matches component devices using their of_node. Since commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading"), the imx-ipuv3-crtc dev->of_node is not set during probing. Before that, of_node was set and caused an of: modalias to be used instead of the platform: modalias, which broke module autoloading. On the other hand, if dev->of_node is not set yet when the imx-ipuv3-crtc probe function calls component_add, component matching in imx-drm-core fails. While dev->of_node will be set once the next component tries to bring up the component master, imx-drm-core component binding will never succeed if one of the crtc devices is probed last. Add of_node to the component platform data and match against the pdata->of_node instead of dev->of_node in imx-drm-core to work around this problem. Fixes: 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading") Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Tested-by:
Fabio Estevam <fabio.estevam@nxp.com> Tested-by:
Lothar Waßmann <LW@KARO-electronics.de> Tested-by:
Heiko Schocher <hs@denx.de> Tested-by:
Chris Ruehl <chris.ruehl@gtsys.com.hk> Signed-off-by:
-
Ville Syrjälä authored
commit b3daa5ef upstream. Add a helper which aids in the identification of DP dual mode (aka. DP++) adaptors. There are several types of adaptors specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors may go as high as 300MHz and they provide a register informing the source device what the actual limit is. Supposedly also type 1 adaptors may optionally implement this register. This TMDS clock limit is the main reason why we need to identify these adaptors. Type 1 adaptors provide access to their internal registers and the sink DDC bus through I2C. Type 2 adaptors provide this access both via I2C and I2C-over-AUX. A type 2 source device may choose to implement either of these methods. If a source device implements the I2C-over-AUX method, then the driver will obviously need specific support for such adaptors since the port is driven like an HDMI port, but DDC communication happes over the AUX channel. This helper should be enough to identify the adaptor type (some type 1 DVI adaptors may be a slight exception) and the maximum TMDS clock limit. Another feature that may be available is control over the TMDS output buffers on the adaptor, possibly allowing for some power saving when the TMDS link is down. Other user controllable features that may be available in the adaptors are downstream i2c bus speed control when using i2c-over-aux, and some control over the CEC pin. I chose not to provide any helper functions for those since I have no use for them in i915 at this time. The rest of the registers in the adaptor are mostly just information, eg. IEEE OUI, hardware and firmware revision, etc. v2: Pass adaptor type to helper functions to ease driver implementation Fix a bunch of typoes (Paulo) Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know the type (Paulo) Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo) Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to ease future LSPCON enabling Remove the unused DP_DUAL_MODE_LAST_RESERVED define v3: Fix kernel doc function argument descriptions (Jani) s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs Add kernel doc for enum drm_dp_dual_mode_type Actually build the docs Fix more typoes v4: Adjust code indentation of type2 adaptor detection (Shashank) Add debug messages for failurs cases (Shashank) v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo) Cc: Tore Anderson <tore@fud.no> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit caed361d upstream. commit 92826fcd ("drm/i915: Calculate watermark related members in the crtc_state, v4.") broke thigns by removing the pre vs. post wm update distinction. We also lost the pre plane wm update entirely for VLV/CHV from the crtc enable path. This caused underruns on modeset and plane enable/disable on CHV, and often those can lead to a dead pipe. So let's bring back the pre vs. post thing, and let's toss in an explicit wm update to valleyview_crtc_enable() to avoid having to put it into the common code. This is more or less a partial revert of the offending commit. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 92826fcd ("drm/i915: Calculate watermark related members in the crtc_state, v4.") Signed-off-by:
-
Ville Syrjälä authored
commit 7045c368 upstream. When we read out the watermark state from the hardware we're supposed to transfer that into the active watermarks, but currently we fail to any part of the active watermarks that isn't explicitly written. Let's clear it all upfront. Looks like this has been like this since the beginning, when I added the readout. No idea why I didn't clear it up. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 243e6a44 ("drm/i915: Init HSW watermark tracking in intel_modeset_setup_hw_state()") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 0c2fb7c6 upstream. To save a bit of power, let's try to turn off the TMDS output buffers in DP++ adaptors when we're not driving the port. v2: Let's not forget DDI, toss in a debug message while at it v3: Just do the TMDS output control based on adaptor type. With the helper getting passed the type, we wouldn't actually have to check at all in the driver, but the check eliminates the debug output more honest Cc: Tore Anderson <tore@fud.no> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> (cherry picked from commit b2ccb822) Signed-off-by:
-
Ville Syrjälä authored
commit c578d152 upstream. Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Reported-by:
Tore Anderson <tore@fud.no> Fixes: 7a0baa62 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit 03b7b5f9 upstream. The default of 0 is 500us of link training, but that's not enough for some platforms. Decoding this correctly means we're using 2.5ms of link training on these platforms, which fixes flickering issues associated with enabling PSR. v2: Unbotch the math a bit. v3: Drop debug hunk. v4: Improve commit message. Tested-by:
Lyude <cpaul@redhat.com> Cc: Lyude <cpaul@redhat.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com> Tested-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463590036-17824-2-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit 50db1390) Signed-off-by:
-
Glenn Ruben Bakke authored
commit 55441070 upstream. The memcpy of ipv6 header destination address to the skb control block (sbk->cb) in header_create() results in currupted memory when bt_xmit() is issued. The skb->cb is "released" in the return of header_create() making room for lower layer to minipulate the skb->cb. The value retrieved in bt_xmit is not persistent across header creation and sending, and the lower layer will overwrite portions of skb->cb, making the copied destination address wrong. The memory corruption will lead to non-working multicast as the first 4 bytes of the copied destination address is replaced by a value that resolves into a non-multicast prefix. This fix removes the dependency on the skb control block between header creation and send, by moving the destination address memcpy to the send function path (setup_create, which is called from bt_xmit). Signed-off-by:
Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Lyude authored
Unfortunately since we don't have Dave's connector refcounting patch here yet, it's very possible that drm_atomic_state_default_clear() could get called by intel_display_resume() when intel_dp_mst_destroy_connector() isn't completely finished destroying an mst connector, but has already finished setting connector->funcs to NULL. As such, we need to treat the connector like it's already been destroyed and just skip it, otherwise we'll end up dereferencing a NULL pointer. This fix is only required for 4.6 and below. David Airlie's patchseries for 4.7 to add connector reference counting provides a more proper fix for this. Changes since v1: - Fix leftover whitespace Upstream fix: 0552f765 ("drm/i915/mst: use reference counted connectors. (v3)") Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Lyude authored
If an MST device is disconnected while the machine is suspended, the number of connectors will change as well after we call intel_dp_mst_resume(). This means that any previous atomic state we had before suspending is no longer valid, since it'll still be pointing to missing connectors. We need to check for this before committing the state, otherwise we'll kernel panic on resume whenever if any MST display was disconnected before we started resuming: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffffa01588ef>] drm_atomic_helper_check_modeset+0x29f/0xb40 [drm_kms_helper] Call Trace: [<ffffffffa02354f4>] intel_atomic_check+0x34/0x1180 [i915] [<ffffffff810e6c3f>] ? mark_held_locks+0x6f/0xa0 [<ffffffff810e6d99>] ? trace_hardirqs_on_caller+0x129/0x1b0 [<ffffffffa00ff1d2>] drm_atomic_check_only+0x192/0x620 [drm] [<ffffffff813ee001>] ? pci_pm_thaw+0x21/0x90 [<ffffffffa00ff677>] drm_atomic_commit+0x17/0x60 [drm] [<ffffffffa023e0ad>] intel_display_resume+0xbd/0x160 [i915] [<ffffffff813ee070>] ? pci_pm_thaw+0x90/0x90 [<ffffffffa01b60d8>] i915_drm_resume+0xd8/0x160 [i915] [<ffffffffa01b6185>] i915_pm_resume+0x25/0x30 [i915] [<ffffffff813ee0d4>] pci_pm_resume+0x64/0xa0 [<ffffffff814d9ea0>] dpm_run_callback+0x90/0x190 [<ffffffff814da455>] device_resume+0xd5/0x1f0 [<ffffffff814da58d>] async_resume+0x1d/0x50 [<ffffffff810b6718>] async_run_entry_fn+0x48/0x150 [<ffffffff810acc19>] process_one_work+0x1e9/0x5c0 [<ffffffff810acb96>] ? process_one_work+0x166/0x5c0 [<ffffffff810ad038>] worker_thread+0x48/0x4e0 [<ffffffff810acff0>] ? process_one_work+0x5c0/0x5c0 [<ffffffff810b3794>] kthread+0xe4/0x100 [<ffffffff81742672>] ret_from_fork+0x22/0x50 [<ffffffff810b36b0>] ? kthread_create_on_node+0x200/0x200 Changes since v1: - Move drm_atomic_state_free() call down so we're holding the appropriate locks when destroying the atomic state Changes since v2: - Check that state != NULL before we start accessing it's members This fix is only required for 4.6 and below. David Airlie's patchseries for 4.7 to add connector reference counting provides a more proper fix for this. Upstream fix: 0552f765 ("drm/i915/mst: use reference counted connectors. (v3)") Reviewed-by: -
Lyude authored
commit 255f0e7c upstream. During boot, MST hotplugs are generally expected (even if no physical hotplugging occurs) and result in DRM's connector topology changing. This means that using num_connector from the current mode configuration can lead to the number of connectors changing under us. This can lead to some nasty scenarios in fbcon: - We allocate an array to the size of dev->mode_config.num_connectors. - MST hotplug occurs, dev->mode_config.num_connectors gets incremented. - We try to loop through each element in the array using the new value of dev->mode_config.num_connectors, and end up going out of bounds since dev->mode_config.num_connectors is now larger then the array we allocated. fb_helper->connector_count however, will always remain consistent while we do a modeset in fb_helper. Note: This is just polish for 4.7, Dave Airlie's drm_connector refcounting fixed these bugs for real. But it's good enough duct-tape for stable kernel backporting, since backporting the refcounting changes is way too invasive. Signed-off-by:
-
Lyude authored
commit 14a3842a upstream. During boot time, MST devices usually send a ton of hotplug events irregardless of whether or not any physical hotplugs actually occurred. Hotplugs mean connectors being created/destroyed, and the number of DRM connectors changing under us. This isn't a problem if we use fb_helper->connector_count since we only set it once in the code, however if we use num_connector from struct drm_mode_config we risk it's value changing under us. On top of that, there's even a chance that dev->mode_config.num_connector != fb_helper->connector_count. If the number of connectors happens to increase under us, we'll end up using the wrong array size for memcpy and start writing beyond the actual length of the array, occasionally resulting in kernel panics. Note: This is just polish for 4.7, Dave Airlie's drm_connector refcounting fixed these bugs for real. But it's good enough duct-tape for stable kernel backporting, since backporting the refcounting changes is way too invasive. Signed-off-by:
-
Mario Kleiner authored
commit 9d746ab6 upstream. When porting the hdmi deep color detection code from radeon-kms to amdgpu-kms apparently some kind of copy and paste error happened, attaching an else branch to the wrong if statement. The result is that hdmi deep color mode is always disabled, regardless of gpu and display capabilities and user wishes, as the code mistakenly thinks that the display doesn't provide the required max_tmds_clock limit and falls back to 8 bpc. This patch fixes deep color support, as tested on a R9 380 Tonga Pro + suitable display, and should be backported to all kernels with amdgpu-kms support. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 6b8812eb upstream. This is a port of radeon commit: 3d2d98ee drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh to amdgpu. Signed-off-by:
-
Thomas Hellstrom authored
commit 93cd1681 upstream. Some global KMS state that is elsewhere protected by the mode_config mutex here needs to be protected with a local mutex. Remove corresponding lockdep checks and introduce a new driver-private global_kms_state_mutex, and make sure its locking order is *after* the crtc locks in order to avoid having to release those when the new mutex is taken. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Itai Handler authored
commit 7ccca1d5 upstream. Fix possible out of bounds read, by adding missing comma. The code may read pass the end of the dsi_errors array when the most significant bit (bit #31) in the intr_stat register is set. This bug has been detected using CppCheck (static analysis tool). Signed-off-by:
Itai Handler <itai_handler@hotmail.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Tomáš Trnka authored
commit c0cb8bf3 upstream. The length of the GSS MIC token need not be a multiple of four bytes. It is then padded by XDR to a multiple of 4 B, but unwrap_integ_data() would previously only trim mic.len + 4 B. The remaining up to three bytes would then trigger a check in nfs4svc_decode_compoundargs(), leading to a "garbage args" error and mount failure: nfs4svc_decode_compoundargs: compound not properly padded! nfsd: failed to decode arguments! This would prevent older clients using the pre-RFC 4121 MIC format (37-byte MIC including a 9-byte OID) from mounting exports from v3.9+ servers using krb5i. The trimming was introduced by commit 4c190e2f ("sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer"). Fixes: 4c190e2f "unrpc: trim off trailing checksum..." Signed-off-by:
Tomáš Trnka <ttrnka@mail.muni.cz> Acked-by:
Jeff Layton <jlayton@poochiereds.net> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Juergen Gross authored
commit dd14be92 upstream. Instead of having two functions for cycling through the E820 map in order to count to be remapped pages and remap them later, just use one function with a caller supplied sub-function called for each region to be processed. This eliminates the possibility of a mismatch between both loops which showed up in certain configurations. Suggested-by:
Ed Swierk <eswierk@skyportsystems.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Ross Lagerwall authored
commit f0f39387 upstream. Commit ff1e22e7 ("xen/events: Mask a moving irq") open-coded irq_move_irq() but left out checking if the IRQ is disabled. This broke resuming from suspend since it tries to move a (disabled) irq without holding the IRQ's desc->lock. Fix it by adding in a check for disabled IRQs. The resulting stacktrace was: kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31! invalid opcode: 0000 [#1] SMP Modules linked in: xenfs xen_privcmd ... CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016 task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000 RIP: 0010:[<ffffffff810e26e2>] [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0 RSP: 0018:ffff88003d7bfc50 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8 RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000 R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0 R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff FS: 0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66 Call Trace: [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160 [<ffffffff810a3830>] ? sort_range+0x30/0x30 [<ffffffff810a0588>] kthread+0xd8/0xf0 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
