- 02 Apr, 2024 6 commits
-
-
Eric Dumazet authored
We lost ability to unload ipv6 module a long time ago. Instead of calling expensive inet_twsk_purge() twice, we can handle all families in one round. Also remove an extra line added in my prior patch, per Kuniyuki Iwashima feedback. Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/netdev/20240327192934.6843-1-kuniyu@amazon.com/Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240329153203.345203-1-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
We can change inet_csk() to propagate its argument const qualifier, thanks to container_of_const(). We have to fix few places that had mistakes, like tcp_bound_rto(). Signed-off-by:
-
Jakub Kicinski authored
Donald Hunter says: ==================== doc: netlink: Add hyperlinks to generated docs Extend ynl-gen-rst to generate hyperlinks to definitions, attribute sets and sub-messages from all the places that reference them. ==================== Link: https://lore.kernel.org/r/20240329135021.52534-1-donald.hunter@gmail.comSigned-off-by:
-
Donald Hunter authored
The tc spec referenced tc-u32-mark and tc-act-police-attrs but did not define them. The missing definitions were discovered when building the docs with generated hyperlinks because the hyperlink target labels were missing. Add definitions for tc-u32-mark and tc-act-police-attrs. Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240329135021.52534-4-donald.hunter@gmail.comSigned-off-by:
-
Donald Hunter authored
Update ynl-gen-rst to generate hyperlinks to definitions, attribute sets and sub-messages from all the places that reference them. Note that there is a single label namespace for all of the kernel docs. Hyperlinks within a single netlink doc need to be qualified by the family name to avoid collisions. The label format is 'family-type-name' which gives, for example, 'rt-link-attribute-set-link-attrs' as the link id. Signed-off-by:
-
Donald Hunter authored
The tables of contents in the generated Netlink docs include individual attribute definitions. This can make the contents exceedingly long and repeats a lot of what is on the rest of the pages. See for example: https://docs.kernel.org/networking/netlink_spec/tc.html Add a depth limit to the contents directive in generated .rst files to limit the contents depth to 3 levels. This reduces the contents to: - Family - Summary - Operations - op-one - op-two - ... - Definitions - struct-one - struct-two - enum-one - ... - Attribute sets - attrs-one - attrs-two - ... Signed-off-by:
Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240329135021.52534-2-donald.hunter@gmail.comSigned-off-by:
-
- 01 Apr, 2024 31 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== net: rps: misc changes Make RPS/RFS a bit more efficient with better cache locality and heuristics. Aso shrink include/linux/netdevice.h a bit. v2: fixed a build issue in patch 6/8 with CONFIG_RPS=n (Jakub and kernel build bots) ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit 14d898f3 ("dev: Move received_rps counter next to RPS members in softnet data") was unfortunate: received_rps is dirtied by a cpu and never read by other cpus in fast path. Its presence in the hot RPS cache line (shared by many cpus) is hurting RPS/RFS performance. Signed-off-by:
-
Eric Dumazet authored
process_backlog() can batch increments of sd->input_queue_head, saving some memory bandwidth. Also add READ_ONCE()/WRITE_ONCE() annotations around sd->input_queue_head accesses. Signed-off-by:
-
Eric Dumazet authored
input_queue_tail_incr_save() is incrementing the sd queue_tail and save it in the flow last_qtail. Two issues here : - no lock protects the write on last_qtail, we should use appropriate annotations. - We can perform this write after releasing the per-cpu backlog lock, to decrease this lock hold duration (move away the cache line miss) Also move input_queue_head_incr() and rps helpers to include/net/rps.h, while adding rps_ prefix to better reflect their role. v2: Fixed a build issue (Jakub and kernel build bots) Signed-off-by:
-
Eric Dumazet authored
We can remove a goto and a label by reversing a condition. Signed-off-by:
-
Eric Dumazet authored
If under extreme cpu backlog pressure enqueue_to_backlog() has to drop a packet, it could do this without dirtying a cache line and potentially slowing down the target cpu. Move sd->dropped into a separate cache line, and make it atomic. In non pressure mode, this field is not touched, no need to consume valuable space in a hot cache line. Signed-off-by:
-
Eric Dumazet authored
If the device attached to the packet given to enqueue_to_backlog() is not running, we drop the packet. But we accidentally increase sd->dropped, giving false signals to admins: sd->dropped should be reserved to cpu backlog pressure, not to temporary glitches at device dismantles. While we are at it, perform the netif_running() test before we get the rps lock, and use REASON_DEV_READY drop reason instead of NOT_SPECIFIED. Signed-off-by:
-
Eric Dumazet authored
Move dev_xmit_recursion() and friends to net/core/dev.h They are only used from net/core/dev.c and net/core/filter.c. Signed-off-by:
-
Eric Dumazet authored
kick_defer_list_purge() is defined in net/core/dev.c and used from net/core/skubff.c Because we need softnet_data, include <linux/netdevice.h> from net/core/dev.h Signed-off-by:
-
David S. Miller authored
Alexander Lobakin says: ==================== ice: add PFCP filter support Add support for creating PFCP filters in switchdev mode. Add pfcp module that allows to create a PFCP-type netdev. The netdev then can be passed to tc when creating a filter to indicate that PFCP filter should be created. To add a PFCP filter, a special netdev must be created and passed to tc command: ip link add pfcp0 type pfcp tc filter add dev eth0 ingress prio 1 flower pfcp_opts \ 1:12ab/ff:fffffffffffffff0 skip_hw action mirred egress redirect \ dev pfcp0 Changes in iproute2 [1] are required to use pfcp_opts in tc. ICE COMMS package is required as it contains PFCP profiles. Part of this patchset modifies IP_TUNNEL_*_OPTs, which were previously stored in a __be16. All possible values have already been used, making it impossible to add new ones. * 1-3: add new bitmap_{read,write}(), which is used later in the IP tunnel flags code (from Alexander's ARM64 MTE series[2]); * 4-14: some bitmap code preparations also used later in IP tunnels; * 15-17: convert IP tunnel flags from __be16 to a bitmap; * 18-21: add PFCP module and support for it in ice. [1] https://lore.kernel.org/netdev/20230614091758.11180-1-marcin.szycik@linux.intel.com [2] https://lore.kernel.org/linux-kernel/20231218124033.551770-1-glider@google.com ==================== Signed-off-by: -
Marcin Szycik authored
Add support for creating PFCP filters in switchdev mode. Add support for parsing PFCP-specific tc options: S flag and SEID. To create a PFCP filter, a special netdev must be created and passed to tc command: ip link add pfcp0 type pfcp tc filter add dev eth0 ingress prio 1 flower pfcp_opts \ 1:123/ff:fffffffffffffff0 skip_hw action mirred egress redirect \ dev pfcp0 Changes in iproute2 [1] are required to be able to use pfcp_opts in tc. ICE COMMS package is required to create a filter as it contains PFCP profiles. Link: https://lore.kernel.org/netdev/20230614091758.11180-1-marcin.szycik@linux.intel.com [1] Signed-off-by:Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
-
Marcin Szycik authored
FLOW_DISSECTOR_KEY_ENC_OPTS can be used for multiple headers, but currently it is treated as GTP-exclusive in ice. Rename ICE_TC_FLWR_FIELD_ENC_OPTS to ICE_TC_FLWR_FIELD_GTP_OPTS and check for tunnel type earlier. After this refactor, it is easier to add new headers using FLOW_DISSECTOR_KEY_ENC_OPTS - instead of checking tunnel type in ice_tc_count_lkups() and ice_tc_fill_tunnel_outer(), it needs to be checked only once, in ice_parse_tunnel_attr(). Signed-off-by:
-
Michal Swiatkowski authored
In PFCP receive path set metadata needed by flower code to do correct classification based on this metadata. Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
-
Wojciech Drewek authored
Packet Forwarding Control Protocol (PFCP) is a 3GPP Protocol used between the control plane and the user plane function. It is specified in TS 29.244[1]. Note that this module is not designed to support this Protocol in the kernel space. There is no support for parsing any PFCP messages. There is no API that could be used by any userspace daemon. Basically it does not support PFCP. This protocol is sophisticated and there is no need for implementing it in the kernel. The purpose of this module is to allow users to setup software and hardware offload of PFCP packets using tc tool. When user requests to create a PFCP device, a new socket is created. The socket is set up with port number 8805 which is specific for PFCP [29.244 4.2.2]. This allow to receive PFCP request messages, response messages use other ports. Note that only one PFCP netdev can be created. Only IPv4 is supported at this time. [1] https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=3111Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
-
Alexander Lobakin authored
Now that there are helpers for converting IP tunnel flags between the old __be16 format and the bitmap format, make sure they work as expected by adding a couple of tests to the networking testing suite. The helpers are all inline, so no dependencies on the related CONFIG_* (or a standalone module) are needed. Cover three possible cases: 1. No bits past BIT(15) are set, VTI/SIT bits are not set. This conversion is almost a direct assignment. 2. No bits past BIT(15) are set, but VTI/SIT bit is set. During the conversion, it must be transformed into BIT(16) in the bitmap, but still compatible with the __be16 format. 3. The bitmap has bits past BIT(15) set (not the VTI/SIT one). The result will be truncated. Note that currently __IP_TUNNEL_FLAG_NUM is 17 (incl. special), which means that the result of this case is currently semi-false-positive. When BIT(17) is finally here, it will be adjusted accordingly. Signed-off-by:
-
Alexander Lobakin authored
Historically, tunnel flags like TUNNEL_CSUM or TUNNEL_ERSPAN_OPT have been defined as __be16. Now all of those 16 bits are occupied and there's no more free space for new flags. It can't be simply switched to a bigger container with no adjustments to the values, since it's an explicit Endian storage, and on LE systems (__be16)0x0001 equals to (__be64)0x0001000000000000. We could probably define new 64-bit flags depending on the Endianness, i.e. (__be64)0x0001 on BE and (__be64)0x00010000... on LE, but that would introduce an Endianness dependency and spawn a ton of Sparse warnings. To mitigate them, all of those places which were adjusted with this change would be touched anyway, so why not define stuff properly if there's no choice. Define IP_TUNNEL_*_BIT counterparts as a bit number instead of the value already coded and a fistful of <16 <-> bitmap> converters and helpers. The two flags which have a different bit position are SIT_ISATAP_BIT and VTI_ISVTI_BIT, as they were defined not as __cpu_to_be16(), but as (__force __be16), i.e. had different positions on LE and BE. Now they both have strongly defined places. Change all __be16 fields which were used to store those flags, to IP_TUNNEL_DECLARE_FLAGS() -> DECLARE_BITMAP(__IP_TUNNEL_FLAG_NUM) -> unsigned long[1] for now, and replace all TUNNEL_* occurrences to their bitmap counterparts. Use the converters in the places which talk to the userspace, hardware (NFP) or other hosts (GRE header). The rest must explicitly use the new flags only. This must be done at once, otherwise there will be too many conversions throughout the code in the intermediate commits. Finally, disable the old __be16 flags for use in the kernel code (except for the two 'irregular' flags mentioned above), to prevent any accidental (mis)use of them. For the userspace, nothing is changed, only additions were made. Most noticeable bloat-o-meter difference (.text): vmlinux: 307/-1 (306) gre.ko: 62/0 (62) ip_gre.ko: 941/-217 (724) [*] ip_tunnel.ko: 390/-900 (-510) [**] ip_vti.ko: 138/0 (138) ip6_gre.ko: 534/-18 (516) [*] ip6_tunnel.ko: 118/-10 (108) [*] gre_flags_to_tnl_flags() grew, but still is inlined [**] ip_tunnel_find() got uninlined, hence such decrease The average code size increase in non-extreme case is 100-200 bytes per module, mostly due to sizeof(long) > sizeof(__be16), as %__IP_TUNNEL_FLAG_NUM is less than %BITS_PER_LONG and the compilers are able to expand the majority of bitmap_*() calls here into direct operations on scalars. Reviewed-by:
-
Alexander Lobakin authored
Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by:
-
Alexander Lobakin authored
Commit dc34d503 ("lib: test_bitmap: add compile-time optimization/evaluations assertions") initially missed __assign_bit(), which led to that quite a time passed before I realized it doesn't get optimized at compilation time. Now that it does, add test for that just to make sure nothing will break one day. To make things more interesting, use bitmap_complement() and bitmap_full(), thus checking their compile-time evaluation as well. And remove the misleading comment mentioning the workaround removed recently in favor of adding the whole file to GCov exceptions. Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Yury Norov <yury.norov@gmail.com> Signed-off-by:
-
Alexander Lobakin authored
Now that we have generic bitmap_read() and bitmap_write(), which are inline and try to take care of non-bound-crossing and aligned cases to keep them optimized, collapse bitmap_{get,set}_value8() into simple wrappers around the former ones. bloat-o-meter shows no difference in vmlinux and -2 bytes for gpio-pca953x.ko, which says the optimization didn't suffer due to that change. The converted helpers have the value width embedded and always compile-time constant and that helps a lot. Suggested-by: -
Alexander Lobakin authored
The number of times yet another open coded `BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge. Some generic helper is long overdue. Add one, bitmap_size(), but with one detail. BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both divident and divisor are compile-time constants or when the divisor is not a pow-of-2. When it is however, the compilers sometimes tend to generate suboptimal code (GCC 13): 48 83 c0 3f add $0x3f,%rax 48 c1 e8 06 shr $0x6,%rax 48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx %BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does full division of `nbits + 63` by it and then multiplication by 8. Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC: 8d 50 3f lea 0x3f(%rax),%edx c1 ea 03 shr $0x3,%edx 81 e2 f8 ff ff 1f and $0x1ffffff8,%edx Now it shifts `nbits + 63` by 3 positions (IOW performs fast division by 8) and then masks bits[2:0]. bloat-o-meter: add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617) Clang does it better and generates the same code before/after starting from -O1, except that with the ALIGN() approach it uses %edx and thus still saves some bytes: add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520) Note that we can't expand DIV_ROUND_UP() by adding a check and using this approach there, as it's used in array declarations where expressions are not allowed. Add this helper to tools/ as well. Reviewed-by:
-
Alexander Lobakin authored
Currently, tools have *ALIGN*() macros scattered across the unrelated headers, as there are only 3 of them and they were added separately each time on an as-needed basis. Anyway, let's make it more consistent with the kernel headers and allow using those macros outside of the mentioned headers. Create <linux/align.h> inside the tools/ folder and include it where needed. Signed-off-by:
-
Alexander Lobakin authored
bitmap_set_bits() does not start with the FS' prefix and may collide with a new generic helper one day. It operates with the FS-specific types, so there's no change those two could do the same thing. Just add the prefix to exclude such possible conflict. Reviewed-by:
David Sterba <dsterba@suse.com> Reviewed-by:
-
Alexander Lobakin authored
bitmap_size() is a pretty generic name and one may want to use it for a generic bitmap API function. At the same time, its logic is NTFS-specific, as it aligns to the sizeof(u64), not the sizeof(long) (although it uses ideologically right ALIGN() instead of division). Add the prefix 'ntfs3_' used for that FS (not just 'ntfs_' to not mix it with the legacy module) and use generic BITS_TO_U64() while at it. Suggested-by: Yury Norov <yury.norov@gmail.com> # BITS_TO_U64() Reviewed-by:
-
Alexander Lobakin authored
bitmap_size() is a pretty generic name and one may want to use it for a generic bitmap API function. At the same time, its logic is not "generic", i.e. it's not just `nbits -> size of bitmap in bytes` converter as it would be expected from its name. Add the prefix 'idset_' used throughout the file where the function resides. Reviewed-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
-
Alexander Lobakin authored
Since commit b03fc117 ("bitops: let optimize out non-atomic bitops on compile-time constants"), the non-atomic bitops are macros which can be expanded by the compilers into compile-time expressions, which will result in better optimized object code. Unfortunately, turned out that passing `volatile` to those macros discards any possibility of optimization, as the compilers then don't even try to look whether the passed bitmap is known at compilation time. In addition to that, the mentioned linkmode helpers are marked with `inline`, not `__always_inline`, meaning that it's not guaranteed some compiler won't uninline them for no reason, which will also effectively prevent them from being optimized (it's a well-known thing the compilers sometimes uninline `2 + 2`). Convert linkmode_*_bit() from inlines to macros. Their calling convention are 1:1 with the corresponding bitops, so that it's not even needed to enumerate and map the arguments, only the names. No changes in vmlinux' object code (compiled by LLVM for x86_64) whatsoever, but that doesn't necessarily means the change is meaningless. Reviewed-by:
-
Alexander Lobakin authored
Since commit b03fc117 ("bitops: let optimize out non-atomic bitops on compile-time constants"), the compilers are able to expand inline bitmap operations to compile-time initializers when possible. However, during the round of replacement if-__set-else-__clear with __assign_bit() as per Andy's advice, bloat-o-meter showed +1024 bytes difference in object code size for one module (even one function), where the pattern: DECLARE_BITMAP(foo) = { }; // on the stack, zeroed if (a) __set_bit(const_bit_num, foo); if (b) __set_bit(another_const_bit_num, foo); ... is heavily used, although there should be no difference: the bitmap is zeroed, so the second half of __assign_bit() should be compiled-out as a no-op. I either missed the fact that __assign_bit() has bitmap pointer marked as `volatile` (as we usually do for bitops) or was hoping that the compilers would at least try to look past the `volatile` for __always_inline functions. Anyhow, due to that attribute, the compilers were always compiling the whole expression and no mentioned compile-time optimizations were working. Convert __assign_bit() to a macro since it's a very simple if-else and all of the checks are performed inside __set_bit() and __clear_bit(), thus that wrapper has to be as transparent as possible. After that change, despite it showing only -20 bytes change for vmlinux (due to that it's still relatively unpopular), no drastic code size changes happen when replacing if-set-else-clear for onstack bitmaps with __assign_bit(), meaning the compiler now expands them to the actual operations will all the expected optimizations. Atomic assign_bit() is less affected due to its nature, but let's convert it to a macro as well to keep the code consistent and not leave a place for possible suboptimal codegen. Moreover, with certain kernel configuration it actually gives some saves (x86): do_ip_setsockopt 4154 4099 -55 Suggested-by: Yury Norov <yury.norov@gmail.com> # assign_bit(), too Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Alexander Lobakin authored
Avoid open-coding that simple expression each time by moving BYTES_TO_BITS() from the probes code to <linux/bitops.h> to export it to the rest of the kernel. Simplify the macro while at it. `BITS_PER_LONG / sizeof(long)` always equals to %BITS_PER_BYTE, regardless of the target architecture. Do the same for the tools ecosystem as well (incl. its version of bitops.h). The previous implementation had its implicit type of long, while the new one is int, so adjust the format literal accordingly in the perf code. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Alexander Lobakin authored
Commit 8238b457 ("wait_on_bit: add an acquire memory barrier") added a new bitop, test_bit_acquire(), with proper wrapping in order to try to optimize it at compile-time, but missed the list of bitops used for checking their prototypes a bit below. The functions added have consistent prototypes, so that no more changes are required and no functional changes take place. Fixes: 8238b457 ("wait_on_bit: add an acquire memory barrier") Reviewed-by:
-
Alexander Potapenko authored
pr_err() messages may be treated as errors by some log readers, so let us only use them for test failures. For non-error messages, replace them with pr_info(). Suggested-by:
Alexander Potapenko <glider@google.com> Acked-by:
-
Alexander Potapenko authored
Add basic tests ensuring that values can be added at arbitrary positions of the bitmap, including those spanning into the adjacent unsigned longs. Two new performance tests, test_bitmap_read_perf() and test_bitmap_write_perf(), can be used to assess future performance improvements of bitmap_read() and bitmap_write(): [ 0.431119][ T1] test_bitmap: Time spent in test_bitmap_read_perf: 615253 [ 0.433197][ T1] test_bitmap: Time spent in test_bitmap_write_perf: 916313 (numbers from a Intel(R) Xeon(R) Gold 6154 CPU @ 3.00GHz machine running QEMU). Signed-off-by:
-
Syed Nayyar Waris authored
The two new functions allow reading/writing values of length up to BITS_PER_LONG bits at arbitrary position in the bitmap. The code was taken from "bitops: Introduce the for_each_set_clump macro" by Syed Nayyar Waris with a number of changes and simplifications: - instead of using roundup(), which adds an unnecessary dependency on <linux/math.h>, we calculate space as BITS_PER_LONG-offset; - indentation is reduced by not using else-clauses (suggested by checkpatch for bitmap_get_value()); - bitmap_get_value()/bitmap_set_value() are renamed to bitmap_read() and bitmap_write(); - some redundant computations are omitted. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Syed Nayyar Waris <syednwaris@gmail.com> Signed-off-by:
William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/lkml/fe12eedf3666f4af5138de0e70b67a07c7f40338.1592224129.git.syednwaris@gmail.com/Suggested-by:
-
- 29 Mar, 2024 3 commits
-
-
Jakub Kicinski authored
Christophe Roullier says: ==================== Add property in dwmac-stm32 documentation Introduce property in dwmac-stm32 documentation - st,ext-phyclk: is present since 2020 in driver so need to explain it and avoid dtbs check issue : views/kernel/upstream/net-next/arch/arm/boot/dts/st/stm32mp157c-dk2.dtb: ethernet@5800a000: Unevaluated properties are not allowed ('st,ext-phyclk' was unexpected) Furthermore this property will be use in upstream of MP13 dwmac glue. (next step) ==================== Link: https://lore.kernel.org/r/20240328185337.332703-1-christophe.roullier@foss.st.comSigned-off-by: -
Christophe Roullier authored
The Linux kernel dwmac-stm32 driver currently supports three DT properties used to configure whether PHY clock are generated by the MAC or supplied to the MAC from the PHY. Originally there were two properties, st,eth-clk-sel and st,eth-ref-clk-sel, each used to configure MAC clocking in different bus mode and for different MAC clock frequency. Since it is possible to determine the MAC 'eth-ck' clock frequency from the clock subsystem and PHY bus mode from the 'phy-mode' property, two disparate DT properties are no longer required to configure MAC clocking. Linux kernel commit 1bb694e2 ("net: ethernet: stmmac: simplify phy modes management for stm32") introduced a third, unified, property st,ext-phyclk. This property covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT properties, as well as a new use case for 25 MHz clock generated by the MAC. The third property st,ext-phyclk is so far undocumented, document it. Below table summarizes the clock requirement and clock sources for supported PHY interface modes. __________________________________________________________________________ |PHY_MODE | Normal | PHY wo crystal| PHY wo crystal |No 125Mhz from PHY| | | | 25MHz | 50MHz | | --------------------------------------------------------------------------- | MII | - | eth-ck | n/a | n/a | | | | st,ext-phyclk | | | --------------------------------------------------------------------------- | GMII | - | eth-ck | n/a | n/a | | | | st,ext-phyclk | | | --------------------------------------------------------------------------- | RGMII | - | eth-ck | n/a | eth-ck | | | | st,ext-phyclk | | st,eth-clk-sel or| | | | | | st,ext-phyclk | --------------------------------------------------------------------------- | RMII | - | eth-ck | eth-ck | n/a | | | | st,ext-phyclk | st,eth-ref-clk-sel | | | | | | or st,ext-phyclk | | --------------------------------------------------------------------------- Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Christophe Roullier <christophe.roullier@foss.st.com> Link: https://lore.kernel.org/r/20240328185337.332703-2-christophe.roullier@foss.st.comSigned-off-by:
-
Johannes Berg authored
There are, especially with multi-attr arrays, many cases of needing to iterate all attributes of a specific type in a netlink message or a nested attribute. Add specific macros to support that case. Also convert many instances using this spatch: @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } Although I had to undo one bad change this made, and I also adjusted some other code for whitespace and to use direct variable initialization now. Signed-off-by:Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeidSigned-off-by:
-
