- 03 Apr, 2022 3 commits
-
-
Christian König authored
Instead use the new dma_resv_get_singleton function. v2: drop the TODO comment. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-7-christian.koenig@amd.com
-
Christian König authored
Add a function to simplify getting a single fence for all the fences in the dma_resv object. v2: fix ref leak in error handling Signed-off-by:
-
Sui Jingfeng authored
Signed-off-by:
Sui Jingfeng <15330273260@189.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20220402134413.1705246-1-15330273260@189.cnReviewed-by:
-
- 02 Apr, 2022 1 commit
-
-
Ramalingam C authored
Add a parameter called "extra_pages" for ttm_tt_init, to indicate that driver needs extra pages in ttm_tt. v2: Used imperative wording [Thomas and Christian] Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> cc: Christian Koenig <christian.koenig@amd.com> cc: Hellstrom Thomas <thomas.hellstrom@intel.com> Reviewed-by:
Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220401123751.27771-8-ramalingam.c@intel.com
-
- 01 Apr, 2022 13 commits
-
-
Jani Nikula authored
The code modifying the EDID block should not need to do tricks to fix the checksum. We have a function for computing the checksum, use it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5a11435419d804a58ef356c0b9acf445cffc1354.1648752228.git.jani.nikula@intel.com
-
Jani Nikula authored
Track invalid blocks instead of valid extensions to minimize impact on the happy day scenario, and hide the details in the separate function. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
It's such a special case there's no point in keeping it inline in the happy day scenario, confusing matters. v2: Rebase on the invalid block filtering fix Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
There's no need to handle complicated scenarios or debug log when filtering blocks that have already been identified as invalid. Simplify by adding an edid_block_valid() helper that operates on const data and prints nothing. (Finally, here's the justification for the previously added separate edid_block_status_valid() function!) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Just i is a bit terse, clarify what it's about. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Add edid_block_check() that only checks the EDID block validity, without any actions. Turns out it's simple and crystal clear. Rewrite drm_edid_block_valid() around it, keeping all the functionality fairly closely the same, warts and all. Turns out it's incredibly complicated for a function you'd expect to be simple, with all the fixing and printing and special casing. (Maybe we'll want to simplify it in the future.) To slightly simplify, drop the warning for EDID minor revisions > 4. v2: - Fix edid_fixup clamp (Ville) - s/base/is_base_block/ (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Give a name to the EDID header fixup instead of having an inline memcpy. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Simplify, rename, take void pointer. No need for the drm_ prefix for internal helpers. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
It will be useful to accept a struct edid *, but for compatibility with existing usage accept void *. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
The extension tag at offset 0 is not present in struct edid, add a helper for it to reduce the need to use u8 *. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Have two clear functions, one to compute the checksum over the EDID, and another to get the checksum from the EDID. Throw away the diff function. Ditch the drm_ prefix for static functions, and accept const void * to help transition to struct edid * usage. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Mixing u8 * and struct edid * is confusing, switch to the latter. v2: - Rebase on the invalid block filtering fix - Rename struct edid *base to *dest_block for clarity (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Christian König authored
So far we had the approach of using a directed acyclic graph with the dma_resv obj. This turned out to have many downsides, especially it means that every single driver and user of this interface needs to be aware of this restriction when adding fences. If the rules for the DAG are not followed then we end up with potential hard to debug memory corruption, information leaks or even elephant big security holes because we allow userspace to access freed up memory. Since we already took a step back from that by always looking at all fences we now go a step further and stop dropping the shared fences when a new exclusive one is added. v2: Drop some now superflous documentation v3: Add some more documentation for the new handling. Signed-off-by:
-
- 31 Mar, 2022 23 commits
-
-
Jagan Teki authored
devm_drm_of_get_bridge is capable of looking up the downstream bridge and panel and trying to add a panel bridge if the panel is found. Replace explicit finding calls with devm_drm_of_get_bridge. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331154503.66054-5-jagan@amarulasolutions.com
-
Jagan Teki authored
devm_drm_of_get_bridge is capable of looking up the downstream bridge and panel and trying to add a panel bridge if the panel is found. Replace explicit finding calls with devm_drm_of_get_bridge. Signed-off-by:
-
Jagan Teki authored
devm_drm_of_get_bridge is capable of looking up the downstream bridge and panel and trying to add a panel bridge if the panel is found. Replace explicit finding calls with devm_drm_of_get_bridge. Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Jagan Teki authored
devm_drm_of_get_bridge is capable of looking up the downstream bridge and panel and trying to add a panel bridge if the panel is found. Replace explicit finding calls with devm_drm_of_get_bridge. Reviewed-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
-
Jagan Teki authored
This reverts commit c206c7fa. In order to avoid any probe ordering issues, the I2C based downstream bridge drivers now register and attach the DSI devices at the probe instead of doing it on drm_bridge_function.attach(). Examples of those commits are: commit <6ef7ee48> ("drm/bridge: sn65dsi83: Register and attach our DSI device at probe") commit <d89078c3> ("drm/bridge: lt8912b: Register and attach our DSI device at probe") commit <864c49a3> ("drm/bridge: adv7511: Register and attach our DSI device at probe") dw-mipi-dsi has panel or bridge finding code based on previous downstream bridges, so revert the same and make the panel or bridge funding in host attach as before. Signed-off-by:
-
Marek Vasut authored
Implement .atomic_get_input_bus_fmts callback, which sets up the input (scanout-engine-end) formats, so that those formats can then be used in pipeline format negotiation between this bridge and the scanout engine. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Dave Airlie <airlied@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Marek Vasut authored
Use the atomic version of the enable/disable operations to continue the transition to the atomic API. This will be needed to access the mode from the atomic state. Signed-off-by:
-
Marek Vasut authored
In rare cases, the bridge may not start up correctly, which usually leads to no display output. In case this happens, warn about it in the kernel log. Signed-off-by:
-
Marek Vasut authored
Read out the Vendor/Chip/Version ID registers from the chip before performing any configuration, and validate that the registers have correct values. This is mostly a simple test whether DSI register access does work, since that tends to be broken on various bridges. Acked-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Marek Vasut authored
Rename and inline macro ICN6211_DSI() into function chipone_writeb() to keep all function names lower-case. No functional change. Acked-by:
-
Marek Vasut authored
The ICN6211 chip starts in I2C configuration mode after cold boot. Implement support for configuring the chip via I2C in addition to the current DSI LP command mode configuration support. The later seems to be available only on chips which have additional MCU on the panel/bridge board which preconfigures the ICN6211, while the I2C configuration mode added by this patch does not require any such MCU. Acked-by:
-
Marek Vasut authored
Implement .atomic_get_input_bus_fmts callback, which sets up the input (DSI-end) format, and that format can then be used in pipeline format negotiation between the DSI-end of this bridge and the other component closer to the scanout engine. Acked-by:
-
Marek Vasut authored
Both example code [1], [2] as well as one provided by custom panel vendor set register SYS_CTRL_1 to 0x88. What exactly does the value mean is unknown due to unavailable datasheet. Align this register value with example code. [1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c [2] https://github.com/tdjastrzebski/ICN6211-ConfiguratorAcked-by:
-
Marek Vasut authored
The chip is capable of swapping DPI RGB channels. The driver currently does not implement support for this functionality. Write the MIPI_PN_SWAP register to 0 to assure the color swap is disabled. Acked-by:
-
Marek Vasut authored
The DSI burst mode is more energy efficient than the DSI sync pulse mode, make use of the burst mode since the chip supports it as well. Disable the generation of EoT packet, the chip ignores it, so no point in emitting it. Enable transmission of data in LP mode, otherwise register read via DSI does not work with this chip. Acked-by:
-
Marek Vasut authored
The chip contains fractional PLL, however the driver currently hard-codes one specific PLL setting. Implement generic PLL parameter calculation code, so any DPI panel with arbitrary pixel clock can be attached to this bridge. The datasheet for this bridge is not available, the PLL behavior has been inferred from [1] and [2] and by analyzing the DPI pixel clock with scope. The PLL limits might be wrong, but at least the calculated values match all the example code available. This is better than one hard-coded pixel clock value anyway. [1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c [2] https://github.com/tdjastrzebski/ICN6211-ConfiguratorAcked-by:
-
Marek Vasut authored
The driver currently hard-codes HS/VS polarity to active-low and DE to active-high, which is not correct for a lot of supported DPI panels. Add the missing mode flag handling for HS/VS/DE polarity. Acked-by:
-
Marek Vasut authored
The HFP_HSW_HBP_HI register must be programmed with 2 LSbits of each Horizontal Front Porch/Sync/Back Porch. Currently the driver programs this register to 0, which breaks displays with either value above 255. The HFP_MIN register must be set to the same value as HFP_LI, otherwise there is visible image distortion, usually in the form of missing lines at the bottom of the panel. Fix this by correctly programming the HFP_HSW_HBP_HI and HFP_MIN registers. Acked-by:
-
Marek Vasut authored
The chip register layout has nothing to do with MIPI DCS, the registers incorrectly marked as MIPI DCS in the driver are regular chip registers often with completely different function. Fill in the actual register names and bits from [1] and [2] and add the entire register layout, since the documentation for this chip is hard to come by. [1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c [2] https://github.com/tdjastrzebski/ICN6211-ConfiguratorAcked-by:
-
Jagan Teki authored
The new support drm bridges are moving towards atomic functions. Replace atomic version of functions to continue the transition to the atomic API. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
-
Jagan Teki authored
Convert the encoders to bridge drivers in order to standardize on a single API with built-in dumb encoder support for compatibility with existing component drivers. Driver bridge conversion will help to reuse the same bridge on different platforms as exynos dsi driver can be used as a Samsung DSIM and use it for i.MX8MM platform. Bridge conversion, - Drops drm_encoder_helper_funcs. - Adds drm_bridge_funcs and register a drm bridge. - Drops bridge_chain. - Separate pre_enable from enable function. - Separate post_disable from disable function. Convert it. Signed-off-by:
-
Jagan Teki authored
Replace the manual panel handling code by a drm panel_bridge via devm_drm_of_get_bridge(). Adding panel_bridge handling, - Drops drm_connector and related operations as drm_bridge_attach creates connector during attachment. - Drops panel pointer and iterate the bridge, so-that it can operate the normal bridge and panel_bridge in constitutive callbacks. This simplifies the driver and allows all components in the display pipeline to be treated as bridges. Signed-off-by:
-
Jagan Teki authored
MIC drivers in the Exynos5433 display pipeline are already registered as bridge drivers and it is more advisable to attach the downstream bridge on the bridge attach call instead of doing the same in the DSI driver. This makes bridge attachment more meaningful and avoids the races during bridge function calls. So, move the bridge finding and drm_bridge_attach from DSI to MIC. Signed-off-by:
-
