- 09 Aug, 2019 1 commit
-
-
Coly Li authored
This reverts commit 89e0341a. In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at the end of list is necessary. Remove the NULL from last element of each lists will cause the following panic, [ 4340.455652] bcache: register_cache() registered cache device nvme0n1 [ 4340.464603] bcache: register_bdev() registered backing device sdk [ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already [ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6 [ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI [ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4 [ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019 [ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000 [ 5139.248021] RIP: 0010:string+0x21/0x70 [ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286 [ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04 [ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff [ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a [ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48 [ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855 [ 5139.248119] FS: 00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000 [ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0 [ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5139.248193] PKRU: 55555554 [ 5139.248200] Call Trace: [ 5139.248210] vsnprintf+0x1fb/0x510 [ 5139.248221] snprintf+0x39/0x40 [ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache] [ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache] [ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210 [ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache] [ 5139.248297] sysfs_kf_seq_show+0xbb/0x190 [ 5139.248308] seq_read+0xfc/0x3c0 [ 5139.248317] __vfs_read+0x26/0x140 [ 5139.248327] vfs_read+0x87/0x130 [ 5139.248336] SyS_read+0x42/0x90 [ 5139.248346] do_syscall_64+0x74/0x160 [ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 5139.248370] RIP: 0033:0x7faf24eea370 [ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370 [ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003 [ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000 [ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000 [ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e The simplest way to fix is to revert commit 89e0341a ("bcache: use sysfs_match_string() instead of __sysfs_match_string()"). This bug was introduced in Linux v5.2, so this fix only applies to Linux v5.2 is enough for stable tree maintainer. Fixes: 89e0341a ("bcache: use sysfs_match_string() instead of __sysfs_match_string()") Cc: stable@vger.kernel.org Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Reported-by:
Peifeng Lin <pflin@suse.com> Acked-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 08 Aug, 2019 6 commits
-
-
Mikulas Patocka authored
A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Jan Kara authored
Commit 89e524c0 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") converted blkdev_get() to use the new helpers for finishing claiming of a block device. However the conversion botched the error handling in blkdev_get() and thus the bdev has been marked as held even in case __blkdev_get() returned error. This led to occasional warnings with block/001 test from blktests like: kernel: WARNING: CPU: 5 PID: 907 at fs/block_dev.c:1899 __blkdev_put+0x396/0x3a0 Correct the error handling. CC: stable@vger.kernel.org Fixes: 89e524c0 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Paolo Valente authored
As reported in [1], the call bfq_init_rq(rq) may return NULL in case of OOM (in particular, if rq->elv.icq is NULL because memory allocation failed in failed in ioc_create_icq()). This commit handles this circumstance. [1] https://lkml.org/lkml/2019/7/22/824 Cc: Hsin-Yi Wang <hsinyi@google.com> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Hsin-Yi Wang <hsinyi@google.com> Reviewed-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
-
Paolo Valente authored
Since commit 13a857a4 ("block, bfq: detect wakers and unconditionally inject their I/O"), every bfq_queue has a pointer to a waker bfq_queue and a list of the bfq_queues it may wake. In this respect, when a bfq_queue, say Q, remains with no I/O source attached to it, Q cannot be woken by any other bfq_queue, and cannot wake any other bfq_queue. Then Q must be removed from the woken list of its possible waker bfq_queue, and all bfq_queues in the woken list of Q must stop having a waker bfq_queue. Q remains with no I/O source in two cases: when the last process associated with Q exits or when such a process gets associated with a different bfq_queue. Unfortunately, commit 13a857a4 ("block, bfq: detect wakers and unconditionally inject their I/O") performed the above updates only in the first case. This commit fixes this bug by moving these updates to when Q gets freed. This is a simple and safe way to handle all cases, as both the above events, process exit and re-association, lead to Q being freed soon, and because dangling references would come out only after Q gets freed (if no update were performed). Fixes: 13a857a4 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
-
Paolo Valente authored
Since commit 13a857a4 ("block, bfq: detect wakers and unconditionally inject their I/O"), BFQ stores, in a per-device pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O request completed. If some bfq_queue receives new I/O right after the last request of last_completed_rq_bfqq has been completed, then last_completed_rq_bfqq may be a waker bfq_queue. But if the bfq_queue last_completed_rq_bfqq points to is freed, then last_completed_rq_bfqq becomes a dangling reference. This commit resets last_completed_rq_bfqq if the pointed bfq_queue is freed. Fixes: 13a857a4 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by:
-
He Zhe authored
Since commit 3582dd29 ("aoe: convert aoeblk to blk-mq"), aoedev_downdev has had the possibility of sleeping and causing the following crash. BUG: scheduling while atomic: rmmod/2242/0x00000003 Modules linked in: aoe Preemption disabled at: [<ffffffffc01d95e5>] flush+0x95/0x4a0 [aoe] CPU: 7 PID: 2242 Comm: rmmod Tainted: G I 5.2.3 #1 Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009 Call Trace: dump_stack+0x4f/0x6a ? flush+0x95/0x4a0 [aoe] __schedule_bug.cold+0x44/0x54 __schedule+0x44f/0x680 schedule+0x44/0xd0 blk_mq_freeze_queue_wait+0x46/0xb0 ? wait_woken+0x80/0x80 blk_mq_freeze_queue+0x1b/0x20 aoedev_downdev+0x111/0x160 [aoe] flush+0xff/0x4a0 [aoe] aoedev_exit+0x23/0x30 [aoe] aoe_exit+0x35/0x948 [aoe] __se_sys_delete_module+0x183/0x210 __x64_sys_delete_module+0x16/0x20 do_syscall_64+0x4d/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f24e0043b07 Code: 73 01 c3 48 8b 0d 89 73 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 59 73 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe18f7f1e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f24e0043b07 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555c3ecf87c8 RBP: 00007ffe18f7f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f24e00b4ac0 R11: 0000000000000206 R12: 00007ffe18f7f238 R13: 00007ffe18f7f410 R14: 00007ffe18f80e73 R15: 0000555c3ecf8760 This patch, handling in the same way of pass two, unlocks the locks and restart pass one after aoedev_downdev is done. Fixes: 3582dd29 ("aoe: convert aoeblk to blk-mq") Signed-off-by:
He Zhe <zhe.he@windriver.com> Signed-off-by:
-
- 07 Aug, 2019 3 commits
-
-
Jens Axboe authored
Abort processing of a command if we run out of mapped data in the SG list. This should never happen, but a previous bug caused it to be possible. Play it safe and attempt to abort nicely if we don't have more SG segments left. Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Jens Axboe authored
For passthrough requests, libata-scsi takes what the user passes in as gospel. This can be problematic if the user fills in the CDB incorrectly. One example of that is in request sizes. For read/write commands, the CDB contains fields describing the transfer length of the request. These should match with the SG_IO header fields, but libata-scsi currently does no validation of that. Check that the number of blocks in the CDB for passthrough requests matches what was mapped into the request. If the CDB asks for more data then the validated SG_IO header fields, error it. Reported-by:
Krishna Ram Prakash R <krp@gtux.in> Reviewed-by:
-
Jens Axboe authored
0eb6ddfb tried to fix this up, but introduced a use-after-free of dio. Additionally, we still had an issue with error handling, as reported by Darrick: "I noticed a regression in xfs/747 (an unreleased xfstest for the xfs_scrub media scanning feature) on 5.3-rc3. I'll condense that down to a simpler reproducer: error-test: 0 209 linear 8:48 0 error-test: 209 1 error error-test: 210 6446894 linear 8:48 210 Basically we have a ~3G /dev/sdd and we set up device mapper to fail IO for sector 209 and to pass the io to the scsi device everywhere else. On 5.3-rc3, performing a directio pread of this range with a < 1M buffer (in other words, a request for fewer than MAX_BIO_PAGES bytes) yields EIO like you'd expect: pread64(3, 0x7f880e1c7000, 1048576, 0) = -1 EIO (Input/output error) pread: Input/output error +++ exited with 0 +++ But doing it with a larger buffer succeeds(!): pread64(3, "XFSB\0\0\20\0\0\0\0\0\0\fL\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1146880, 0) = 1146880 read 1146880/1146880 bytes at offset 0 1 MiB, 1 ops; 0.0009 sec (1.124 GiB/sec and 1052.6316 ops/sec) +++ exited with 0 +++ (Note that the part of the buffer corresponding to the dm-error area is uninitialized) On 5.3-rc2, both commands would fail with EIO like you'd expect. The only change between rc2 and rc3 is commit 0eb6ddfb ("block: Fix __blkdev_direct_IO() for bio fragments"). AFAICT we end up in __blkdev_direct_IO with a 1120K buffer, which gets split into two bios: one for the first BIO_MAX_PAGES worth of data (1MB) and a second one for the 96k after that." Fix this by noting that it's always safe to dereference dio if we get BLK_QC_T_EAGAIN returned, as end_io hasn't been run for that case. So we can safely increment the dio size before calling submit_bio(), and then decrement it on failure (not that it really matters, as the bio and dio are going away). For error handling, return to the original method of just using 'ret' for tracking the error, and the size tracking in dio->size. Fixes: 0eb6ddfb ("block: Fix __blkdev_direct_IO() for bio fragments") Fixes: 6a43074e ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
- 06 Aug, 2019 1 commit
-
-
Gustavo A. R. Silva authored
Fix the following warning (Building: rb532_defconfig mips): drivers/ata/pata_rb532_cf.c: In function ‘rb532_pata_driver_remove’: drivers/ata/pata_rb532_cf.c:161:24: warning: unused variable ‘info’ [-Wunused-variable] struct rb532_cf_info *info = ah->private_data; ^~~~ Fixes: cd56f35e ("ata: rb532_cf: Convert to use GPIO descriptors") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
- 02 Aug, 2019 1 commit
-
-
Stefan Haberland authored
After getting a storage server event that causes the DASD device driver to update its unit address configuration during a device shutdown there is the possibility of an endless loop in the device driver. In the system log there will be ongoing DASD error messages with RC: -19. The reason is that the loop starting the ruac request only terminates when the retry counter is decreased to 0. But in the sleep_on function there are early exit paths that do not decrease the retry counter. Prevent an endless loop by handling those cases separately. Remove the unnecessary do..while loop since the sleep_on function takes care of retries by itself. Fixes: 8e09f215 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org # 2.6.25+ Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by:
-
- 01 Aug, 2019 1 commit
-
-
Damien Le Moal authored
The recent fix to properly handle IOCB_NOWAIT for async O_DIRECT IO (patch 6a43074e) introduced two problems with BIO fragment handling for direct IOs: 1) The dio size processed is calculated by incrementing the ret variable by the size of the bio fragment issued for the dio. However, this size is obtained directly from bio->bi_iter.bi_size AFTER the bio submission which may result in referencing the bi_size value after the bio completed, resulting in an incorrect value use. 2) The ret variable is not incremented by the size of the last bio fragment issued for the bio, leading to an invalid IO size being returned to the user. Fix both problem by using dio->size (which is incremented before the bio submission) to update the value of ret after bio submissions, including for the last bio fragment issued. Fixes: 6a43074e ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by:
Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
- 31 Jul, 2019 4 commits
-
-
Denis Efremov authored
I would like to maintain the floppy driver. After the recent fixes, I think I know the code pretty well. Nowadays I've got 2 physical 3.5" readers to test all the changes. Signed-off-by:
Denis Efremov <efremov@linux.com> Acked-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Munehisa Kamata authored
Commit abbbdf12 ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc0 ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc0 ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla <manoj.br@gmail.com> Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Munehisa Kamata <kamatam@amazon.com> Signed-off-by:
-
Miquel Raynal authored
Retrieving PHYs can defer the probe, do not spawn an error when -EPROBE_DEFER is returned, it is normal behavior. Fixes: b1a9edbd ("ata: libahci: allow to use multiple PHYs") Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Jackie Liu authored
[root@localhost ~]# ./liburing/test/link QEMU Standard PC report that: [ 29.379892] CPU: 0 PID: 84 Comm: kworker/u2:2 Not tainted 5.3.0-rc2-00051-g4010b622-dirty #86 [ 29.379902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 29.379913] Workqueue: io_ring-wq io_sq_wq_submit_work [ 29.379929] Call Trace: [ 29.379953] dump_stack+0xa9/0x10e [ 29.379970] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.379986] print_address_description.cold.6+0x9/0x317 [ 29.379999] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380010] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380026] __kasan_report.cold.7+0x1a/0x34 [ 29.380044] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380061] kasan_report+0xe/0x12 [ 29.380076] io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380104] ? io_sq_thread+0xaf0/0xaf0 [ 29.380152] process_one_work+0xb59/0x19e0 [ 29.380184] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [ 29.380221] worker_thread+0x8c/0xf40 [ 29.380248] ? __kthread_parkme+0xab/0x110 [ 29.380265] ? process_one_work+0x19e0/0x19e0 [ 29.380278] kthread+0x30b/0x3d0 [ 29.380292] ? kthread_create_on_node+0xe0/0xe0 [ 29.380311] ret_from_fork+0x3a/0x50 [ 29.380635] Allocated by task 209: [ 29.381255] save_stack+0x19/0x80 [ 29.381268] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 29.381279] kmem_cache_alloc+0xc0/0x240 [ 29.381289] io_submit_sqe+0x11bc/0x1c70 [ 29.381300] io_ring_submit+0x174/0x3c0 [ 29.381311] __x64_sys_io_uring_enter+0x601/0x780 [ 29.381322] do_syscall_64+0x9f/0x4d0 [ 29.381336] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.381633] Freed by task 84: [ 29.382186] save_stack+0x19/0x80 [ 29.382198] __kasan_slab_free+0x11d/0x160 [ 29.382210] kmem_cache_free+0x8c/0x2f0 [ 29.382220] io_put_req+0x22/0x30 [ 29.382230] io_sq_wq_submit_work+0x28b/0xe90 [ 29.382241] process_one_work+0xb59/0x19e0 [ 29.382251] worker_thread+0x8c/0xf40 [ 29.382262] kthread+0x30b/0x3d0 [ 29.382272] ret_from_fork+0x3a/0x50 [ 29.382569] The buggy address belongs to the object at ffff888067172140 which belongs to the cache io_kiocb of size 224 [ 29.384692] The buggy address is located 120 bytes inside of 224-byte region [ffff888067172140, ffff888067172220) [ 29.386723] The buggy address belongs to the page: [ 29.387575] page:ffffea00019c5c80 refcount:1 mapcount:0 mapping:ffff88806ace5180 index:0x0 [ 29.387587] flags: 0x100000000000200(slab) [ 29.387603] raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806ace5180 [ 29.387617] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 29.387624] page dumped because: kasan: bad access detected [ 29.387920] Memory state around the buggy address: [ 29.388771] ffff888067172080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 29.390062] ffff888067172100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 29.391325] >ffff888067172180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 29.392578] ^ [ 29.393480] ffff888067172200: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 29.394744] ffff888067172280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 29.396003] ================================================================== [ 29.397260] Disabling lock debugging due to kernel taint io_sq_wq_submit_work free and read req again. Cc: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: f7b76ac9 ("io_uring: fix counter inc/dec mismatch in async_list") Signed-off-by:
Jackie Liu <liuyun01@kylinos.cn> Signed-off-by:
-
- 30 Jul, 2019 1 commit
-
-
Jan Kara authored
Commit 33ec3e53 ("loop: Don't change loop device under exclusive opener") made LOOP_SET_FD ioctl acquire exclusive block device reference while it updates loop device binding. However this can make perfectly valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding temporarily the exclusive bdev reference in cases like this: for i in {a..z}{a..z}; do dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024 mkfs.ext2 $i.image mkdir mnt$i done echo "Run" for i in {a..z}{a..z}; do mount -o loop -t ext2 $i.image mnt$i & done Fix the problem by not getting full exclusive bdev reference in LOOP_SET_FD but instead just mark the bdev as being claimed while we update the binding information. This just blocks new exclusive openers instead of failing them with EBUSY thus fixing the problem. Fixes: 33ec3e53 ("loop: Don't change loop device under exclusive opener") Cc: stable@vger.kernel.org Tested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
- 29 Jul, 2019 2 commits
-
-
Kees Cook authored
Jeffrin reported a KASAN issue: BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70 Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149 ... The buggy address belongs to the variable: cdb.48319+0x0/0x40 Much like commit 18c9a99b ("libata: zpodd: small read overflow in eject_tray()"), this fixes a cdb[] buffer length, this time in zpodd_get_mech_type(): We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Reported-by:Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Fixes: afe75951 ("libata: identify and init ZPODD devices") Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: m68k): drivers/block/ataflop.c: In function ‘fd_locked_ioctl’: drivers/block/ataflop.c:1728:3: warning: this statement may fall through [-Wimplicit-fallthrough=] set_capacity(floppy->disk, MAX_DISK_SIZE * 2); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/block/ataflop.c:1729:2: note: here case FDFMTEND: ^~~~ Signed-off-by:
-
- 28 Jul, 2019 13 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull structleak fix from Kees Cook: "Disable gcc-based stack variable auto-init under KASAN (Arnd Bergmann). This fixes a bunch of build warnings under KASAN and the gcc-plugin-based stack auto-initialization features (which are arguably redundant, so better to let KASAN control this)" * tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - add compile_commands.json to .gitignore - fix false-positive warning from gen_compile_commands.py after allnoconfig build - remove unused code * tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove unused single-used-m gen_compile_commands: lower the entry count threshold .gitignore: Add compilation database file kbuild: remove unused objectify macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.3-rc2 to resolve some reported issues. Nothing major at all, some binder bugfixes for issues found, some new mei device ids, firmware building warning fixes, habanalabs fixes, a few other build fixes, and a MAINTAINERS update. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: test_firmware: fix a memory leak bug hpet: Fix division by zero in hpet_time_div() eeprom: make older eeprom drivers select NVMEM_SYSFS vmw_balloon: Remove Julien from the maintainers list fpga-manager: altera-ps-spi: Fix build error mei: me: add mule creek canyon (EHL) device ids binder: prevent transactions to context manager from its own process. binder: Set end of SG buffer area properly. firmware: Fix missing inline firmware: fix build errors in paged buffer handling code habanalabs: don't reset device when getting VRHOT habanalabs: use %pad for printing a dma_addr_t
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fixes from Greg KH: "Here are two tty/vt fixes: - delete the netx-serial driver as the arch has been removed, no need to keep the serial driver for it around either. - vt console_lock fix to resolve a reported noisy warning at runtime Both of these have been in linux-next with no reported issues" * tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Grab console_lock around con_is_bound in show_bind tty: serial: netx: Delete driver -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdxLinus Torvalds authored
Pull SPDX fixes from Greg KH: "Here are some small SPDX fixes for 5.3-rc2 for things that came in during the 5.3-rc1 merge window that we previously missed. Only three small patches here: - two uapi patches to resolve some SPDX tags that were not correct - fix an invalid SPDX tag in the iomap Makefile file All have been properly reviewed on the public mailing lists" * tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: iomap: fix Invalid License ID treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small fixes for 5.3-rc2. All of these resolve some reported issues, some more than others :) Included in here is: - xhci fix for an annoying issue with odd devices - reversion of some usb251xb patches that should not have been merged - usb pci quirk additions and fixups - usb storage fix - usb host controller error test fix All of these have been in linux-next with no reported issues" * tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT). usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port Revert "usb: usb251xb: Add US port lanes inversion property" Revert "usb: usb251xb: Add US lanes inversion dts-bindings" usb: wusbcore: fix unbalanced get/put cluster_id usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem() usb-storage: Add a limitation for blk_queue_max_hw_sectors() usb: pci-quirks: Minor cleanup for AMD PLL quirk usb: pci-quirks: Correct AMD PLL quirk detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Here's the first batch of fixes for this release cycle. Main diffstat here is the re-deletion of netx. I messed up and most likely didn't remove the files from the index when I test-merged this and saw conflicts, and from there on out 'git rerere' remembered the mistake and I missed checking it. Here it's done again as expected. Besides that: - A defconfig refresh + enabling of new drivers for u8500 - i.MX fixlets for i2c/SAI/pinmux - sleep.S build fix for Davinci - Broadcom devicetree build/warning fix" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: defconfig: u8500: Add new drivers ARM: defconfig: u8500: Refresh defconfig ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux ARM: davinci: fix sleep.S build error on ARMv4 arm64: dts: imx8mq: fix SAI compatible arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1 ARM: dts: imx6ul: fix clock frequency property name of I2C buses ARM: Delete netx a second time ARM: dts: imx7ulp: Fix usb-phy unit address format
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and functional updates: - Prevent stale huge I/O TLB mappings on 32bit. A long standing bug which got exposed by KPTI support for 32bit - Prevent bogus access_ok() warnings in arch_stack_walk_user() - Add display quirks for Lenovo devices which have height and width swapped - Add the missing CR2 fixup for 32 bit async pagefaults. Fallout of the CR2 bug fix series. - Unbreak handling of force enabled HPET by moving the 'is HPET counting' check back to the original place. - A more accurate check for running on a hypervisor platform in the MDS mitigation code. Not perfect, but more accurate than the previous one. - Update a stale and confusing comment vs. IRQ stacks" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/mds: Apply more accurate check on hypervisor platform x86/hpet: Undo the early counter is counting check x86/entry/32: Pass cr2 to do_async_page_fault() x86/irq/64: Update stale comment x86/sysfb_efi: Add quirks for some devices with swapped width and height x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user() mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy() x86/mm: Sync also unmappings in vmalloc_sync_all() x86/mm: Check for pfn instead of page in vmalloc_sync_one() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two fixes for the fair scheduling class: - Prevent freeing memory which is accessible by concurrent readers - Make the RCU annotations for numa groups consistent" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Use RCU accessors consistently for ->numa_group sched/fair: Don't free p->numa_faults with concurrent readers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A pile of perf related fixes: Kernel: - Fix SLOTS PEBS event constraints for Icelake CPUs - Add the missing mask bit to allow counting hardware generated prefetches on L3 for Icelake CPUs - Make the test for hypervisor platforms more accurate (as far as possible) - Handle PMUs correctly which override event->cpu - Yet another missing fallthrough annotation Tools: perf.data: - Fix loading of compressed data split across adjacent records - Fix buffer size setting for processing CPU topology perf.data header. perf stat: - Fix segfault for event group in repeat mode - Always separate "stalled cycles per insn" line, it was being appended to the "instructions" line. perf script: - Fix --max-blocks man page description. - Improve man page description of metrics. - Fix off by one in brstackinsn IPC computation. perf probe: - Avoid calling freeing routine multiple times for same pointer. perf build: - Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings treated as errors, breaking the build" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Mark expected switch fall-throughs perf/core: Fix creating kernel counters for PMUs that override event->cpu perf/x86: Apply more accurate check on hypervisor platform perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register perf/x86/intel: Fix SLOTS PEBS event constraint perf build: Do not use -Wshadow on gcc < 4.8 perf probe: Avoid calling freeing routine multiple times for same pointer perf probe: Set pev->nargs to zero after freeing pev->args entries perf session: Fix loading of compressed data split across adjacent records perf stat: Always separate stalled cycles per insn perf stat: Fix segfault for event group in repeat mode perf tools: Fix proper buffer size for feature processing perf script: Fix off by one in brstackinsn IPC computation perf script: Improve man page description of metrics perf script: Fix --max-blocks man page description -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A set of locking fixes: - Address the fallout of the rwsem rework. Missing ACQUIREs and a sanity check to prevent a use-after-free - Add missing checks for unitialized mutexes when mutex debugging is enabled. - Remove the bogus code in the generic SMP variant of arch_futex_atomic_op_inuser() - Fixup the #ifdeffery in lockdep to prevent compile warnings" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: Test for initialized mutex locking/lockdep: Clean up #ifdef checks locking/lockdep: Hide unused 'class' variable locking/rwsem: Add ACQUIRE comments tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty locking/rwsem: Don't call owner_on_cpu() on read-owner futex: Cleanup generic SMP variant of arch_futex_atomic_op_inuser() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Thomas Gleixner: "A single robustness fix for objtool to handle unbalanced CLAC invocations under all circumstances" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Improve UACCESS coverage
-
- 27 Jul, 2019 7 commits
-
-
Linus Torvalds authored
Merge tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva: "This marks switch cases where we are expecting to fall through, and globally enables the -Wimplicit-fallthrough option in the main Makefile. Finally, some missing-break fixes that have been tagged for -stable: - drm/amdkfd: Fix missing break in switch statement - drm/amdgpu/gfx10: Fix missing break in switch statement With these changes, we completely get rid of all the fall-through warnings in the kernel" * tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: Makefile: Globally enable fall-through warning drm/i915: Mark expected switch fall-throughs drm/amd/display: Mark expected switch fall-throughs drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning drm/amdgpu/gfx10: Fix missing break in switch statement drm/amdkfd: Fix missing break in switch statement perf/x86/intel: Mark expected switch fall-throughs mtd: onenand_base: Mark expected switch fall-through afs: fsclient: Mark expected switch fall-throughs afs: yfsclient: Mark expected switch fall-throughs can: mark expected switch fall-throughs firewire: mark expected switch fall-throughs
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Heiko Carstens: - Add ABI to kernel image file which allows e.g. the file utility to figure out the kernel version. - Wire up clone3 system call. - Add support for kasan bitops instrumentation. - uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t. - Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly defined with 2 GB instead of the default value of 1 MB. - Farhan Ali leaves the group of vfio-ccw maintainers. - Various small vfio-ccw fixes. - Add missing locking for airq_areas array in virtio code. - Minor qdio improvements. * tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: MAINTAINERS: vfio-ccw: Remove myself as the maintainer s390/mm: use shared variables for sysctl range check virtio/s390: fix race on airq_areas[] s390/dma: provide proper ARCH_ZONE_DMA_BITS value s390/kasan: add bitops instrumentation s390/bitops: make test functions return bool s390: wire up clone3 system call kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header s390/hypfs: fix a typo in the name of a function s390/qdio: restrict QAOB usage to IQD unicast queues s390/qdio: add sanity checks to the fast-requeue path s390: enable detection of kernel version from bzImage Documentation: fix vfio-ccw doc vfio-ccw: Update documentation for csch/hsch vfio-ccw: Don't call cp_free if we are processing a channel program vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn vfio-ccw: Fix memory leak and don't call cp_free in cp_init vfio-ccw: Fix misleading comment when setting orb.cmd.c64 -
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: "The nvmem changes would typically go thru Greg's tree, but they were missed in the merge window. [ Acked by Greg ] Summary: - Fix mismatches in $id values and actual filenames. Now checked by tools. - Convert nvmem binding to DT schema - Fix a typo in of_property_read_bool() kerneldoc - Remove some redundant description in al-fic interrupt-controller" * tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Fix more $id value mismatches filenames dt-bindings: nvmem: SID: Fix the examples node names dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings of: Fix typo in kerneldoc dt-bindings: interrupt-controller: al-fic: remove redundant binding dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id -
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A collection of locking and async operations fixes for v5.3-rc2. These had been soaking in a branch targeting the merge window, but missed due to a regression hunt. This fixed up version has otherwise been in -next this past week with no reported issues. In order to gain confidence in the locking changes the pull also includes a debug / instrumentation patch to enable lockdep coverage for libnvdimm subsystem operations that depend on the device_lock for exclusion. As mentioned in the changelog it is a hack, but it works and documents the locking expectations of the sub-system in a way that others can use lockdep to verify. The driver core touches got an ack from Greg. Summary: - Fix duplicate device_unregister() calls (multiple threads competing to do unregister work when scheduling device removal from a sysfs attribute of the self-same device). - Fix badblocks registration order bug. Ensure region badblocks are initialized in advance of namespace registration. - Fix a deadlock between the bus lock and probe operations. - Export device-core infrastructure to coordinate async operations via the device ->dead state. - Add device-core infrastructure to validate device_lock() usage with lockdep" * tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: driver-core, libnvdimm: Let device subsystems add local lockdep coverage libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl() libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant libnvdimm/region: Register badblocks before namespaces libnvdimm/bus: Prevent duplicate device_unregister() calls drivers/base: Introduce kill_device() -
Masahiro Yamada authored
This is unused since commit 9f69a496 ("kbuild: split out *.mod out of {single,multi}-used-m rules"). Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Running gen_compile_commands.py after building the kernel with allnoconfig gave this: $ ./scripts/gen_compile_commands.py WARNING: Found 449 entries. Have you compiled the kernel? Signed-off-by: -
Toru Komatsu authored
This file is used by clangd to use language server protocol. It can be generated at each compile using scripts/gen_compile_commands.py. Therefore it is different depending on the environment and should be ignored. Signed-off-by:
Toru Komatsu <k0ma@utam0k.jp> Reviewed-by:
-
