dead code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Returning a positive integer instead of an error code causes error paths
to become very confused.

Closes: syzbot+c0360e8367d6d8d04a66@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The pointer clean points the memory allocated by kmemdup, when the
return value of bch2_sb_clean_validate_late is not zero. The memory
pointed by clean is leaked. So we should free it in this case.

Fixes: a37ad1a3 ("bcachefs: sb-clean.c")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In downgrade_table_extra, the return value is needed. When it
return failed, we should exit immediately.

Fixes: 7773df19 ("bcachefs: metadata version bucket_stripe_sectors")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

A couple small error handling fixes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

this allows for various cleanups in fsck
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

syzbot reported a null ptr deref in __copy_user [0]

In __bch2_read_super, when a corrupt backup superblock matches the
default opts offset, no error is assigned to ret and the freed superblock
gets through, possibly being assigned as the best sb in bch2_fs_open and
being later dereferenced, causing a fault. Assign EINVALID to ret when
iterating through layout.

[0]: https://syzkaller.appspot.com/bug?extid=18a5c5e8a9c856944876

Reported-by: syzbot+18a5c5e8a9c856944876@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=18a5c5e8a9c856944876Signed-off-by: Diogo Jahchan Koike <djahchankoike@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

check_topology doesn't need the srcu lock and doesn't use normal btree
transactions - we can just drop the srcu lock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

fsck_err() jumps to the fsck_err label when bailing out; need to make
sure bp_iter was initialized...
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Zero-initialize part of allocated bounce buffer which wasn't touched by
subsequent bch2_key_sort_fix_overlapping to mitigate later uinit-value
use KMSAN bug[1].

After applying the patch reproducer still triggers stack overflow[2] but
it seems unrelated to the uninit-value use warning. After further
investigation it was found that stack overflow occurs because KMSAN adds
too many function calls[3]. Backtrace of where the stack magic number gets
smashed was added as a reply to syzkaller thread[3].

It was confirmed that task's stack magic number gets smashed after the code
path where KSMAN detects uninit-value use is executed, so it can be assumed
that it doesn't contribute in any way to uninit-value use detection.

[1] https://syzkaller.appspot.com/bug?extid=6f655a60d3244d0c6718
[2] https://lore.kernel.org/lkml/66e57e46.050a0220.115905.0002.GAE@google.com
[3] https://lore.kernel.org/all/rVaWgPULej8K7HqMPNIu8kVNyXNjjCiTB-QBtItLFBmk0alH6fV2tk4joVPk97Evnuv4ZRDd8HB5uDCkiFG6u81xKdzDj-KrtIMJSlF6Kt8=@proton.me

Reported-by: syzbot+6f655a60d3244d0c6718@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6f655a60d3244d0c6718
Fixes: ec4edd7b ("bcachefs: Prep work for variable size btree node buffers")
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a kasan splat in propagate_key_to_snapshot_leaves() -
varint_decode_fast() does reads (that it never uses) up to 7 bytes past
the end of the integer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Most or all errors will be autofix in the future, we're currently just
doing the ones that we know are well tested.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

As we iterate we need to mark that we no longer need iterators -
otherwise we'll infinite loop via the "too many iters" check when
there's many snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

if it doesn't get set we'll never be able to flush the btree write
buffer; this only happens in fake rw mode, but prevents us from shutting
down.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Syzbot reports a problem that a warning is triggered due to suspicious
use of rcu_dereference_check(). That is triggered by a call of
bch2_snapshot_tree_oldest_subvol().

The cause of the warning is that inside
bch2_snapshot_tree_oldest_subvol(), snapshot_t() is called which calls
rcu_dereference() that requires a read lock to be held. Also, the call
of bch2_snapshot_tree_next() eventually calls snapshot_t().

To fix this, call rcu_read_lock() before calling snapshot_t(). Then,
release the lock after the termination of the while loop.

Reported-by: <syzbot+f7c41a878676b72c16a6@syzkaller.appspotmail.com>
Signed-off-by: Ahmed Ehab <bottaawesome633@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

syzbot reported a null-ptr-deref in bch2_fs_start. [0]

When a sb is marked clear but doesn't have a clean section
bch2_read_superblock_clean returns NULL which PTR_ERR_OR_ZERO
lets through, eventually leading to a null ptr dereference down
the line. Adjust read sb clean to return an ERR_PTR indicating the
invalid clean section.

[0] https://syzkaller.appspot.com/bug?extid=1cecc37d87c4286e5543

Reported-by: syzbot+1cecc37d87c4286e5543@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1cecc37d87c4286e5543Signed-off-by: Diogo Jahchan Koike <djahchankoike@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The header files bbpos.h is included twice in backpointers.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10783Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This factors out ec_strie_head_devs_update(), which initializes the
bitmap of devices we're allocating from, and runs it every time
c->rw_devs_change_count changes.

We also cancel pending, not allocated stripes, since they may refer to
devices that are no longer available.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a counter that's incremented whenever rw devices change; this will
be used for erasure coding so that it can keep ec_stripe_head in sync
and not deadlock on a new stripe when a device it wants goes away.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We can now correctly force-remove a device that has stripes on it; this
uses the new BCH_SB_MEMBER_INVALID sentinal value.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is necessary for erasure coded pointers to devices that have been
removed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

also print out the new stripe key
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

additional debug stat
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When reshaping existing stripes, we should keep them on the same target
that they were allocated on; to do this, we need to add a field to the
btree stripe type.

This is a tad awkward, because we only have 8 bits left, and targets are
16 bits - but we only need to store a label, not a full target.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

factor out a common helper
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We want to be using private errcodes whenever possible, for better error
messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In backpointers fsck, we do a seqential scan of one btree, and check
references to another: extents <-> backpointers

Checking references generates random lookups, so we want to pin that
btree in memory (or only a range, if it doesn't fit in ram).

Previously, this was done with a simple check in the shrinker - "if
btree node is in range being pinned, don't free it" - but this generated
OOMs, as our shrinker wasn't well behaved if there was less memory
available than expected.

Instead, we now have two different shrinkers and lru lists; the second
shrinker being for pinned nodes, with seeks set much higher than normal
- so they can still be freed if necessary, but we'll prefer not to.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

this is prep for introducing a second live list and shrinker for pinned
nodes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

32 bits won't overflow any time soon, but size_t is the correct type for
counting objects in memory.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_dev_rcu() now properly errors if the device is invalid
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Factor out bch2_show_options() into a generic helper, for debugging
option passing issues.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Fix the following compilation error:

```
fs/bcachefs/sb-members.c: In function ‘bch2_sb_member_alloc’:
fs/bcachefs/sb-members.c:508:2: error: a label can only be part of a statement and a declaration is not a statement
  508 |  unsigned nr_devices = max_t(unsigned, dev_idx + 1, c->sb.nr_devices);
```

Fixes: a7d364a133c7 ("bcachefs: bch2_sb_member_alloc()")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>