- 05 Aug, 2019 11 commits
-
-
Will Deacon authored
The arm64 implementation of the default I/O accessors requires barrier instructions to satisfy the memory ordering requirements documented in memory-barriers.txt [1], which are largely derived from the behaviour of I/O accesses on x86. Of particular interest are the requirements that a write to a device must be ordered against prior writes to memory, and a read from a device must be ordered against subsequent reads from memory. We satisfy these requirements using various flavours of DSB: the most expensive barrier we have, since it implies completion of prior accesses. This was deemed necessary when we first implemented the accessors, since accesses to different endpoints could propagate independently and therefore the only way to enforce order is to rely on completion guarantees [2]. Since then, the Armv8 memory model has been retrospectively strengthened to require "other-multi-copy atomicity", a property that requires memory accesses from an observer to become visible to all other observers simultaneously [3]. In other words, propagation of accesses is limited to transitioning from locally observed to globally observed. It recently became apparent that this change also has a subtle impact on our I/O accessors for shared peripherals, allowing us to use the cheaper DMB instruction instead. As a concrete example, consider the following: memcpy(dma_buffer, data, bufsz); writel(DMA_START, dev->ctrl_reg); A DMB ST instruction between the final write to the DMA buffer and the write to the control register will ensure that the writes to the DMA buffer are observed before the write to the control register by all observers. Put another way, if an observer can see the write to the control register, it can also see the writes to memory. This has always been the case and is not sufficient to provide the ordering required by Linux, since there is no guarantee that the master interface of the DMA-capable device has observed either of the accesses. However, in an other-multi-copy atomic world, we can infer two things: 1. A write arriving at an endpoint shared between multiple CPUs is visible to all CPUs 2. A write that is visible to all CPUs is also visible to all other observers in the shareability domain Pieced together, this allows us to use DMB OSHST for our default I/O write accessors and DMB OSHLD for our default I/O read accessors (the outer-shareability is for handling non-cacheable mappings) for shared devices. Memory-mapped, DMA-capable peripherals that are private to a CPU (i.e. inaccessible to other CPUs) still require the DSB, however these are few and far between and typically require special treatment anyway which is outside of the scope of the portable driver API (e.g. GIC, page-table walker, SPE profiler). Note that our mandatory barriers remain as DSBs, since there are cases where they are used to flush the store buffer of the CPU, e.g. when publishing page table updates to the SMMU. [1] https://git.kernel.org/linus/4614bbdee357 [2] https://www.youtube.com/watch?v=i6DayghhA8Q [3] https://www.cl.cam.ac.uk/~pes20/armv8-mca/Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
-
Mark Brown authored
The function cpucap_multi_entry_cap_cpu_enable() is unused, remove it to avoid any confusion reading the code and potential for bit rot. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
-
Will Deacon authored
Our SCTLR_ELx field definitions are somewhat over-engineered in that they carefully define masks describing the RES0/RES1 bits and then use these to construct further masks representing bits to be set/cleared for the _EL1 and _EL2 registers. However, most of the resulting definitions aren't actually used by anybody and have subsequently started to bit-rot when new fields have been added by the architecture, resulting in fields being part of the RES0 mask despite being defined and used elsewhere. Rather than fix up these masks, simply remove the unused parts entirely so that we can drop the maintenance burden. We can always add things back if we need them in the future. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Will Deacon authored
The ESR.EC encoding of 0b011010 (0x1a) describes an exception generated by an ERET, ERETAA or ERETAB instruction as a result of a nested virtualisation trap to EL2. Add an encoding for this EC and a string description so that we identify it correctly if we take one unexpectedly. Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
-
Chuhong Yuan authored
In commit b6b27355 ("tracing: Use str_has_prefix() instead of using fixed sizes") the newly introduced str_has_prefix() was used to replace error-prone strncmp(str, const, len). Here fix codes with the same pattern. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Lorenzo Pieralisi authored
Commit 36a2ba07 ("ACPI/IORT: Reject platform device creation on NUMA node mapping failure") introduced a local variable 'node' in arm_smmu_v3_set_proximity() that shadows the struct acpi_iort_node pointer function parameter. Execution was unaffected but it is prone to errors and can lead to subtle bugs. Rename the local variable to prevent any issue. Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Masahiro Yamada authored
stat.h is listed in include/uapi/asm-generic/Kbuild, so Kbuild will automatically generate it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Bhupesh Sharma authored
With commit b6664ba4 ("s390, kexec_file: drop arch_kexec_mem_walk()"), we introduced the KEXEC_BUF_MEM_UNKNOWN macro. If kexec_buf.mem is set to this value, kexec_locate_mem_hole() will try to allocate free memory. While other arch(s) like s390 and x86_64 already use this macro to initialize kexec_buf.mem with, arm64 uses an equivalent value of 0. Replace it with KEXEC_BUF_MEM_UNKNOWN, to keep the convention of initializing 'kxec_buf.mem' consistent across various archs. Cc: takahiro.akashi@linaro.org Cc: james.morse@arm.com Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Mark Rutland authored
For a number of years, UAPI headers have been split from kernel-internal headers. The latter are never exposed to userspace, and always built with __KERNEL__ defined. Most headers under arch/arm64 don't have __KERNEL__ guards, but there are a few stragglers lying around. To make things more consistent, and to set a good example going forward, let's remove these redundant __KERNEL__ guards. In a couple of cases, a trailing #endif lacked a comment describing its corresponding #if or #ifdef, so these are fixes up at the same time. Guards in auto-generated crypto code are left as-is, as these guards are generated by scripting imported from the upstream openssl project scripts. Guards in UAPI headers are left as-is, as these can be included by userspace or the kernel. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Julien Thierry authored
As of commit 4141c857 ("arm64: convert raw syscall invocation to C"), moving syscall handling from assembly to C, the macro mask_nospec64 is no longer referenced. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Linus Torvalds authored
-
- 04 Aug, 2019 10 commits
-
-
git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Two bug fixes that did not make into my first pull request" * tag 'tpmdd-next-20190805' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: tpm_ibm_vtpm: Fix unallocated banks tpm: Fix null pointer dereference on chip register error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Miquel Raynal: "NAND: - Fix Micron driver as some chips enable internal ECC correction during their discovery while they advertize they do not have any. Hyperbus: - Restrict the build to only ARM64 SoCs (and compile testing) which is what should have been done since the beginning. - Fix Kconfig issue by selection something instead of implying it" * tag 'mtd/fixes-for-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: hyperbus: Add hardware dependency to AM654 driver mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependencies mtd: rawnand: micron: handle on-die "ECC-off" devices correctly
-
Nayna Jain authored
The nr_allocated_banks and allocated banks are initialized as part of tpm_chip_register. Currently, this is done as part of auto startup function. However, some drivers, like the ibm vtpm driver, do not run auto startup during initialization. This results in uninitialized memory issue and causes a kernel panic during boot. This patch moves the pcr allocation outside the auto startup function into tpm_chip_register. This ensures that allocated banks are initialized in any case. Fixes: 879b5892 ("tpm: retrieve digest size of unknown algorithms with PCR read") Reported-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Tested-by: Michal Suchánek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
-
Milan Broz authored
If clk_enable is not defined and chip initialization is canceled code hits null dereference. Easily reproducible with vTPM init fail: swtpm chardev --tpmstate dir=nonexistent_dir --tpm2 --vtpm-proxy BUG: kernel NULL pointer dereference, address: 00000000 ... Call Trace: tpm_chip_start+0x9d/0xa0 [tpm] tpm_chip_register+0x10/0x1a0 [tpm] vtpm_proxy_work+0x11/0x30 [tpm_vtpm_proxy] process_one_work+0x214/0x5a0 worker_thread+0x134/0x3e0 ? process_one_work+0x5a0/0x5a0 kthread+0xd4/0x100 ? process_one_work+0x5a0/0x5a0 ? kthread_park+0x90/0x90 ret_from_fork+0x19/0x24 Fixes: 719b7d81 ("tpm: introduce tpm_chip_start() and tpm_chip_stop()") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.3: - Wire up the new clone3 syscall. - A fix for the PAPR SCM nvdimm driver, to fix a crash when firmware gives us a device that's attached to a non-online NUMA node. - A fix for a boot failure on 32-bit with KASAN enabled. - Three fixes for implicit fall through warnings, some of which are errors for us due to -Werror. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Kees Cook, Santosh Sivaraj, Stephen Rothwell" * tag 'powerpc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kasan: fix early boot failure on PPC32 drivers/macintosh/smu.c: Mark expected switch fall-through powerpc/spe: Mark expected switch fall-throughs powerpc/nvdimm: Pick nearby online node if the device node is not online powerpc/kvm: Fall through switch case explicitly powerpc: Wire up clone3 syscall
-
Geert Uytterhoeven authored
At the end of the v5.3 upstream kernel development cycle, Simon will be stepping down from his role as Renesas SoC maintainer. Starting with the v5.4 development cycle, Geert is taking over this role. Add Geert as a co-maintainer, and add his git repository and branch. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - detect missing missing "WITH Linux-syscall-note" for uapi headers - fix needless rebuild when using Clang - fix false-positive cc-option in Kconfig when using Clang - avoid including corrupted .*.cmd files in the modpost stage - fix warning of 'make vmlinux' - fix {m,n,x,g}config to not generate the broken .config on the second save operation. - some trivial Makefile fixes * tag 'kbuild-fixes-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: Clear "written" flag to avoid data loss kbuild: Check for unknown options with cc-option usage in Kconfig and clang lib/raid6: fix unnecessary rebuild of vpermxor*.c kbuild: modpost: do not parse unnecessary rules for vmlinux modpost kbuild: modpost: remove unnecessary dependency for __modpost kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules kbuild: modpost: include .*.cmd files only when targets exist kbuild: initialize CLANG_FLAGS correctly in the top Makefile kbuild: detect missing "WITH Linux-syscall-note" for uapi headers
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID maintainer update from Micah Morton: "Add entry in MAINTAINERS file for SafeSetID LSM" * tag 'safesetid-maintainers-correction-5.3-rc2' of git://github.com/micah-morton/linux: Add entry in MAINTAINERS file for SafeSetID LSM
-
M. Vefa Bicakci authored
Prior to this commit, starting nconfig, xconfig or gconfig, and saving the .config file more than once caused data loss, where a .config file that contained only comments would be written to disk starting from the second save operation. This bug manifests itself because the SYMBOL_WRITTEN flag is never cleared after the first call to conf_write, and subsequent calls to conf_write then skip all of the configuration symbols due to the SYMBOL_WRITTEN flag being set. This commit resolves this issue by clearing the SYMBOL_WRITTEN flag from all symbols before conf_write returns. Fixes: 8e2442a5 ("kconfig: fix missing choice values in auto.conf") Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull Xtensa fix from Max Filippov: "Fix build for xtensa cores with coprocessors that was broken by entry/return abstraction patch" * tag 'xtensa-20190803' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build for cores with coprocessors
-
- 03 Aug, 2019 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A set of driver fixes for the I2C subsystem" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: s3c2410: Mark expected switch fall-through i2c: at91: fix clk_offset for sama5d2 i2c: at91: disable TXRDY interrupt after sending data i2c: iproc: Fix i2c master read more than 63 bytes eeprom: at24: make spd world-readable again
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Thomas Gleixner: "A set of updates for perf tools and documentation: perf header: - Prevent a division by zero - Deal with an uninitialized warning proper libbpf: - Fix the missiong __WORDSIZE definition for musl & al UAPI headers: - Synchronize kernel headers Documentation: - Fix the memory units for perf.data size" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: libbpf: fix missing __WORDSIZE definition perf tools: Fix perf.data documentation units for memory size perf header: Fix use of unitialized value warning perf header: Fix divide by zero error if f_header.attr_size==0 tools headers UAPI: Sync if_link.h with the kernel tools headers UAPI: Sync sched.h with the kernel tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC() tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Update tools's copy of mman.h headers tools headers UAPI: Update tools's copy of kvm.h headers tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull vdso timer fixes from Thomas Gleixner: "A series of commits to deal with the regression caused by the generic VDSO implementation. The usage of clock_gettime64() for 32bit compat fallback syscalls caused seccomp filters to kill innocent processes because they only allow clock_gettime(). Handle the compat syscalls with clock_gettime() as before, which is not a functional problem for the VDSO as the legacy compat application interface is not y2038 safe anyway. It's just extra fallback code which needs to be implemented on every architecture. It's opt in for now so that it does not break the compile of already converted architectures in linux-next. Once these are fixed, the #ifdeffery goes away. So much for trying to be smart and reuse code..." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64: compat: vdso: Use legacy syscalls as fallback x86/vdso/32: Use 32bit syscall fallback lib/vdso/32: Provide legacy syscall fallbacks lib/vdso: Move fallback invocation to the callers lib/vdso/32: Remove inconsistent NULL pointer checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A small bunch of fixes from the irqchip department: - Fix a couple of UAF on error paths (RZA1, GICv3 ITS) - Fix iMX GPCv2 trigger setting - Add missing of_node_put() on error path in MBIGEN - Add another bunch of /* fall-through */ to silence warnings" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/renesas-rza1: Fix an use-after-free in rza1_irqc_probe() irqchip/irq-imx-gpcv2: Forward irq type to parent irqchip/irq-mbigen: Add of_node_put() before return irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail irqchip/gic-v3: Mark expected switch fall-through
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - Avoid leaking kernel stack contents to userspace - Fix a potential null pointer dereference in the dabtree scrub code * tag 'xfs-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Fix possible null-pointer dereferences in xchk_da_btree_block_check_sibling() xfs: fix stack contents leakage in the v1 inumber ioctls
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: drivers/acpi/scan.c: document why we don't need the device_hotplug_lock memremap: move from kernel/ to mm/ lib/test_meminit.c: use GFP_ATOMIC in RCU critical section asm-generic: fix -Wtype-limits compiler warnings cgroup: kselftest: relax fs_spec checks mm/memory_hotplug.c: remove unneeded return for void function mm/migrate.c: initialize pud_entry in migrate_vma() coredump: split pipe command whitespace before expanding template page flags: prioritize kasan bits over last-cpuid ubsan: build ubsan.c more conservatively kasan: remove clang version check for KASAN_STACK mm: compaction: avoid 100% CPU usage during compaction when a task is killed mm: migrate: fix reference check race between __find_get_block() and migration mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker ocfs2: remove set but not used variable 'last_hash' Revert "kmemleak: allow to coexist with fault injection" kernel/signal.c: fix a kernel-doc markup
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Three minor RISC-V-related changes for v5.3-rc3: - Add build ID to VDSO builds to avoid a double-free in perf when libelf isn't used - Align the RV64 defconfig to the output of "make savedefconfig" so subsequent defconfig patches don't get out of hand - Drop a superfluous DT property from the FU540 SoC DT data (since it must be already set in board data that includes it)" * tag 'riscv/for-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig" riscv: dts: fu540-c000: drop "timebase-frequency" riscv: Fix perf record without libelf support
-
David Hildenbrand authored
Let's document why the lock is not needed in acpi_scan_init(), right now this is not really obvious. [akpm@linux-foundation.org: fix tpyo] Link: http://lkml.kernel.org/r/20190731135306.31524-1-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
memremap.c implements MM functionality for ZONE_DEVICE, so it really should be in the mm/ directory, not the kernel/ one. Link: http://lkml.kernel.org/r/20190722094143.18387-1-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Potapenko authored
kmalloc() shouldn't sleep while in RCU critical section, therefore use GFP_ATOMIC instead of GFP_KERNEL. The bug was spotted by the 0day kernel testing robot. Link: http://lkml.kernel.org/r/20190725121703.210874-1-glider@google.com Fixes: 7e659650cbda ("lib: introduce test_meminit module") Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Qian Cai authored
Commit d66acc39 ("bitops: Optimise get_order()") introduced a compilation warning because "rx_frag_size" is an "ushort" while PAGE_SHIFT here is 16. The commit changed the get_order() to be a multi-line macro where compilers insist to check all statements in the macro even when __builtin_constant_p(rx_frag_size) will return false as "rx_frag_size" is a module parameter. In file included from ./arch/powerpc/include/asm/page_64.h:107, from ./arch/powerpc/include/asm/page.h:242, from ./arch/powerpc/include/asm/mmu.h:132, from ./arch/powerpc/include/asm/lppaca.h:47, from ./arch/powerpc/include/asm/paca.h:17, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/thread_info.h:21, from ./arch/powerpc/include/asm/processor.h:39, from ./include/linux/prefetch.h:15, from drivers/net/ethernet/emulex/benet/be_main.c:14: drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create': ./include/asm-generic/getorder.h:54:9: warning: comparison is always true due to limited range of data type [-Wtype-limits] (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ ^ drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion of macro 'get_order' adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; ^~~~~~~~~ Fix it by moving all of this multi-line macro into a proper function, and killing __get_order() off. [akpm@linux-foundation.org: remove __get_order() altogether] [cai@lca.pw: v2] Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw Fixes: d66acc39 ("bitops: Optimise get_order()") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: James Y Knight <jyknight@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Chris Down authored
On my laptop most memcg kselftests were being skipped because it claimed cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it seems current systemd HEAD mounts it with the name "cgroup2" instead of "cgroup": % grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0 I can't think of a reason to need to check fs_spec explicitly since it's arbitrary, so we can just rely on fs_vfstype. After these changes, `make TARGETS=cgroup kselftest` actually runs the cgroup v2 tests in more cases. Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.nameSigned-off-by: Chris Down <chris@chrisdown.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Weitao Hou authored
return is unneeded in void function Link: http://lkml.kernel.org/r/20190723130814.21826-1-houweitaoo@gmail.comSigned-off-by: Weitao Hou <houweitaoo@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ralph Campbell authored
When CONFIG_MIGRATE_VMA_HELPER is enabled, migrate_vma() calls migrate_vma_collect() which initializes a struct mm_walk but didn't initialize mm_walk.pud_entry. (Found by code inspection) Use a C structure initialization to make sure it is set to NULL. Link: http://lkml.kernel.org/r/20190719233225.12243-1-rcampbell@nvidia.com Fixes: 8763cb45 ("mm/migrate: new memory migration helper for use with device memory") Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Wise authored
Save the offsets of the start of each argument to avoid having to update pointers to each argument after every corename krealloc and to avoid having to duplicate the memory for the dump command. Executable names containing spaces were previously being expanded from %e or %E and then split in the middle of the filename. This is incorrect behaviour since an argument list can represent arguments with spaces. The splitting could lead to extra arguments being passed to the core dump handler that it might have interpreted as options or ignored completely. Core dump handlers that are not aware of this Linux kernel issue will be using %e or %E without considering that it may be split and so they will be vulnerable to processes with spaces in their names breaking their argument list. If their internals are otherwise well written, such as if they are written in shell but quote arguments, they will work better after this change than before. If they are not well written, then there is a slight chance of breakage depending on the details of the code but they will already be fairly broken by the split filenames. Core dump handlers that are aware of this Linux kernel issue will be placing %e or %E as the last item in their core_pattern and then aggregating all of the remaining arguments into one, separated by spaces. Alternatively they will be obtaining the filename via other methods. Both of these will be compatible with the new arrangement. A side effect from this change is that unknown template types (for example %z) result in an empty argument to the dump handler instead of the argument being dropped. This is a desired change as: It is easier for dump handlers to process empty arguments than dropped ones, especially if they are written in shell or don't pass each template item with a preceding command-line option in order to differentiate between individual template types. Most core_patterns in the wild do not use options so they can confuse different template types (especially numeric ones) if an earlier one gets dropped in old kernels. If the kernel introduces a new template type and a core_pattern uses it, the core dump handler might not expect that the argument can be dropped in old kernels. For example, this can result in security issues when %d is dropped in old kernels. This happened with the corekeeper package in Debian and resulted in the interface between corekeeper and Linux having to be rewritten to use command-line options to differentiate between template types. The core_pattern for most core dump handlers is written by the handler author who would generally not insert unknown template types so this change should be compatible with all the core dump handlers that exist. Link: http://lkml.kernel.org/r/20190528051142.24939-1-pabs3@bonedaddy.net Fixes: 74aadce9 ("core_pattern: allow passing of arguments to user mode helper when core_pattern is a pipe") Signed-off-by: Paul Wise <pabs3@bonedaddy.net> Reported-by: Jakub Wilk <jwilk@jwilk.net> [https://bugs.debian.org/924398] Reported-by: Paul Wise <pabs3@bonedaddy.net> [https://lore.kernel.org/linux-fsdevel/c8b7ecb8508895bf4adb62a748e2ea2c71854597.camel@bonedaddy.net/] Suggested-by: Jakub Wilk <jwilk@jwilk.net> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
ARM64 randdconfig builds regularly run into a build error, especially when NUMA_BALANCING and SPARSEMEM are enabled but not SPARSEMEM_VMEMMAP: #error "KASAN: not enough bits in page flags for tag" The last-cpuid bits are already contitional on the available space, so the result of the calculation is a bit random on whether they were already left out or not. Adding the kasan tag bits before last-cpuid makes it much more likely to end up with a successful build here, and should be reliable for randconfig at least, as long as that does not randomize NR_CPUS or NODES_SHIFT but uses the defaults. In order for the modified check to not trigger in the x86 vdso32 code where all constants are wrong (building with -m32), enclose all the definitions with an #ifdef. [arnd@arndb.de: build fix] Link: http://lkml.kernel.org/r/CAK8P3a3Mno1SWTcuAOT0Wa9VS15pdU6EfnkxLbDpyS55yO04+g@mail.gmail.com Link: http://lkml.kernel.org/r/20190722115520.3743282-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190618095347.3850490-1-arnd@arndb.de/ Fixes: 2813b9c0 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
objtool points out several conditions that it does not like, depending on the combination with other configuration options and compiler variants: stack protector: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0xbf: call to __stack_chk_fail() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0xbe: call to __stack_chk_fail() with UACCESS enabled stackleak plugin: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x4a: call to stackleak_track_stack() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x4a: call to stackleak_track_stack() with UACCESS enabled kasan: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x25: call to memcpy() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x25: call to memcpy() with UACCESS enabled The stackleak and kasan options just need to be disabled for this file as we do for other files already. For the stack protector, we already attempt to disable it, but this fails on clang because the check is mixed with the gcc specific -fno-conserve-stack option. According to Andrey Ryabinin, that option is not even needed, dropping it here fixes the stackprotector issue. Link: http://lkml.kernel.org/r/20190722125139.1335385-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190617123109.667090-1-arnd@arndb.de/t/ Link: https://lore.kernel.org/lkml/20190722091050.2188664-1-arnd@arndb.de/t/ Fixes: d08965a2 ("x86/uaccess, ubsan: Fix UBSAN vs. SMAP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
asan-stack mode still uses dangerously large kernel stacks of tens of kilobytes in some drivers, and it does not seem that anyone is working on the clang bug. Turn it off for all clang versions to prevent users from accidentally enabling it once they update to clang-9, and to help automated build testing with clang-9. Link: https://bugs.llvm.org/show_bug.cgi?id=38809 Link: http://lkml.kernel.org/r/20190719200347.2596375-1-arnd@arndb.de Fixes: 6baec880 ("kasan: turn off asan-stack for clang-8 and earlier") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Qian Cai <cai@lca.pw> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
"howaboutsynergy" reported via kernel buzilla number 204165 that compact_zone_order was consuming 100% CPU during a stress test for prolonged periods of time. Specifically the following command, which should exit in 10 seconds, was taking an excessive time to finish while the CPU was pegged at 100%. stress -m 220 --vm-bytes 1000000000 --timeout 10 Tracing indicated a pattern as follows stress-3923 [007] 519.106208: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106212: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106216: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106219: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106223: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106227: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106231: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106235: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106238: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106242: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 Note that compaction is entered in rapid succession while scanning and isolating nothing. The problem is that when a task that is compacting receives a fatal signal, it retries indefinitely instead of exiting while making no progress as a fatal signal is pending. It's not easy to trigger this condition although enabling zswap helps on the basis that the timing is altered. A very small window has to be hit for the problem to occur (signal delivered while compacting and isolating a PFN for migration that is not aligned to SWAP_CLUSTER_MAX). This was reproduced locally -- 16G single socket system, 8G swap, 30% zswap configured, vm-bytes 22000000000 using Colin Kings stress-ng implementation from github running in a loop until the problem hits). Tracing recorded the problem occurring almost 200K times in a short window. With this patch, the problem hit 4 times but the task existed normally instead of consuming CPU. This problem has existed for some time but it was made worse by commit cf66f070 ("mm, compaction: do not consider a need to reschedule as contention"). Before that commit, if the same condition was hit then locks would be quickly contended and compaction would exit that way. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204165 Link: http://lkml.kernel.org/r/20190718085708.GE24383@techsingularity.net Fixes: cf66f070 ("mm, compaction: do not consider a need to reschedule as contention") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [5.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-