- 18 May, 2023 1 commit
-
-
Andrzej Hajda authored
Multiple CI tests fails with forcewake ack timeouts if render power gating is enabled. BSpec 52698 states it should be 0 for MTL, but apparently this info is outdated. Anyway since the patch makes MTL pass basic tests added FIXME tag informing this is temporary workaround. v2: added FIXME tag Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4983Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517-mtl_disable_render_pg-v2-1-0b51180a43f0@intel.com
-
- 17 May, 2023 1 commit
-
-
Vinay Belgaumkar authored
rps_boost debugfs shows host turbo related info. This is not valid when SLPC is enabled. guc_slpc_info already shows the number of boosts. Add num_waiters there as well and disable rps_boost when SLPC is enabled. v2: Replace Bug with Link to resolve checkpatch warning Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7632Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230516154905.1048006-1-vinay.belgaumkar@intel.com
-
- 16 May, 2023 2 commits
-
-
John Harrison authored
In the past, There have been sporadic CTB failures which proved hard to reproduce manually. The most effective solution was to dump the GuC log at the point of failure and let the CI system do the repro. It is preferable not to dump the GuC log via dmesg for all issues as it is not always necessary and is not helpful for end users. But rather than trying to re-invent the code to do this each time it is wanted, commit the code but for DEBUG_GUC builds only. v2: Use IS_ENABLED for testing config options. Signed-off-by:
-
John Harrison authored
This is useful for getting debug information out in certain situations, such as failing kernel selftests and CI runs that don't log error captures. It is especially useful for things like retrieving GuC logs as GuC operation can't be tracked by adding printk or ftrace entries. v2: Add CONFIG_DRM_I915_DEBUG_GEM wrapper (review feedback by Rodrigo). Signed-off-by:
-
- 15 May, 2023 1 commit
-
-
Ashutosh Dixit authored
Loading i915 on UBSAN enabled kernels (CONFIG_UBSAN/CONFIG_UBSAN_BOOL) causes the following warning: UBSAN: invalid-load in drivers/gpu/drm/i915/gt/uc/intel_uc.c:558:2 load of value 255 is not a valid value for type '_Bool' Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value.cold+0x43/0x48 __uc_init_hw+0x76a/0x903 [i915] ... i915_driver_probe+0xfb1/0x1eb0 [i915] i915_pci_probe+0xbe/0x2d0 [i915] The warning happens because during probe i915_hwmon is still not available which results in the output boolean variable *old remaining uninitialized. Silence the warning by initializing the variable to an arbitrary value. v2: Move variable initialization to the declaration (Andi) Signed-off-by:
-
- 12 May, 2023 10 commits
-
-
John Harrison authored
The GuC has a completely separate engine class enum when referring to register capture lists, which combines render and compute. The driver was using the 'normal' GuC specific engine class enum instead. That meant that it thought it was defining a capture list for compute engines, the list was actually being applied to the GSC engine. And if a platform didn't have a render engine, then it would get no compute register captures at all. Fix that. Signed-off-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512013544.3367606-1-John.C.Harrison@Intel.com
-
John Harrison authored
A recent change bumped a 'notice' message up to 'error' level for debug builds to help trap incorrect configurations in CI systems. Unfortunately, the error condition in question is triggered by the error injection probe test. So change the message again to be 'probe error' level instead. Signed-off-by:
-
Alan Previn authored
Enable PXP with MTL-GSC-CS: add the has_pxp into device info and increase the debugfs teardown timeouts to align with new GSC-CS + firmware specs. Now that we have 3 places that are selecting pxp timeouts based on tee vs gsccs back-end, let's add a helper. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-9-alan.previn.teres.alexis@intel.com
-
Alan Previn authored
On legacy platforms, KCR HW enabling is done at the time the mei component interface is bound. It's also disabled during unbind. However, for MTL onwards, we don't depend on a tee component to start sending GSC-CS firmware messages. Thus, immediately enable (or disable) KCR HW on PXP's init, fini and resume. Signed-off-by:
-
Alan Previn authored
Because of the additional firmware, component-driver and initialization depedencies required on MTL platform before a PXP context can be created, UMD calling for PXP creation as a way to get-caps can take a long time. An actual real world customer stack has seen this happen in the 4-to-8 second range after the kernel starts (which sees MESA's init appear in the middle of this range as the compositor comes up). To avoid unncessary delays experienced by the UMD for get-caps purposes, add a GET_PARAM for I915_PARAM_PXP_SUPPORT. However, some failures can still occur after all the depedencies are met (such as firmware init flow failure, bios configurations or SOC fusing not allowing PXP enablement). Those scenarios will only be known to user space when it attempts creating a PXP context and is documented in the GEM UAPI headers. While making this change, create a helper that is common to both GET_PARAM caller and intel_pxp_start since the latter does similar checks. Signed-off-by:
Jordan Justen <jordan.l.justen@intel.com> Signed-off-by:
-
Alan Previn authored
Add MTL's function for ARB session creation using PXP firmware version 4.3 ABI structure format. While relooking at the ARB session creation flow in intel_pxp_start, let's address missing UAPI documentation. Without actually changing backward compatible behavior, update i915's drm-uapi comments that describe the possible error values when creating a context with I915_CONTEXT_PARAM_PROTECTED_CONTENT: Since the first merge of PXP support on ADL, i915 returns -ENXIO if a dependency such as firmware or component driver was yet to be loaded or returns -EIO if the creation attempt failed when requested by the PXP firmware (specific firmware error responses are reported in dmesg). Add MTL's function for ARB session invalidation but this reuses PXP firmware version 4.2 ABI structure format. For both cases, in the back-end gsccs functions for sending messages to the firmware inspect the GSC-CS-Mem-Header's pending-bit which means the GSC firmware is busy and we should retry. Given the last hw requirement, lets also update functions in front-end layer that wait for session creation or teardown completion to use new worst case timeout periods. Signed-off-by:
-
Alan Previn authored
Add GSC engine based method for sending PXP firmware packets to the GSC firmware for MTL (and future) products. Use the newly added helpers to populate the GSC-CS memory header and send the message packet to the FW by dispatching the GSC_HECI_CMD_PKT instruction on the GSC engine. We use non-priveleged batches for submission to GSC engine which require two buffers for the request: - a buffer for the HECI packet that contains PXP FW commands - a batch-buffer that contains the engine instruction for sending the HECI packet to the GSC firmware. Thus, add the allocation and freeing of these buffers in gsccs init and fini. The GSC-fw may reply to commands with a SUCCESS but with an additional pending-bit set in the reply packet. This bit means the GSC-FW is currently busy and the caller needs to try again with the gsc_message_handle the fw returned. Thus, add a wrapper to continuously retry send_message while replaying the gsc_message_handle. Retries need to follow the arch-spec count and delay until GSC-FW replies with the real SUCCESS or timeout after that spec'd delay. The GSC-fw requires a non-zero host_session_handle provided by the caller to enable gsc_message_handle tracking. Thus, allocate the host_session_handle at init and destroy it at fini (the latter requiring an FYI to the gsc-firmware). Signed-off-by: -
Alan Previn authored
Add helper functions into a new file for heci-packet-submission. The helpers will handle generating the MTL GSC-CS Memory-Header and submission of the Heci-Cmd-Packet instructions to the engine. NOTE1: These common functions for heci-packet-submission will be used by different i915 callers: 1- GSC-SW-Proxy: This is pending upstream publication awaiting a few remaining opens 2- MTL-HDCP: An equivalent patch has also been published at: https://patchwork.freedesktop.org/series/111876/. (Patch 1) 3- PXP: This series. NOTE2: A difference in this patch vs what is appearing is in bullet 2 above is that HDCP (and SW-Proxy) will be using priveleged submission (GGTT and common gsc-uc-context) while PXP will be using non-priveleged PPGTT, context and batch buffer. Therefore this patch will only slightly overlap with the MTL-HDCP patches despite have very similar function names (emit_foo vs emit_nonpriv_foo). This is because HECI_CMD_PKT instructions require different flows and hw-specific code when done via PPGTT based submission (not different from other engines). MTL-HDCP contains the same intel_gsc_mtl_header_t structures as this but the helpers there are different. Both add the same new file names. NOTE3: Additional clarity about the heci-cmd-pkt layout and where the common helpers come in: - On MTL, when an i915 subsystem needs to send a command request to the security firmware, it will send that via the GSC- engine-command-streamer. - However those commands, (lets call them "gsc_specific_fw_api" calls), are not understood by the GSC command streamer hw. - The GSC CS only looks at the GSC_HECI_CMD_PKT instruction and passes it along to the GSC firmware. - The GSC FW on the other hand needs additional metadata to know which usage service is being called (PXP, HDCP, proxy, etc) along with session specific info. Thus an extra header called GSC-CS HECI Memory Header, (C) in below diagram is prepended before the FW specific API, (D). - Thus, the structural layout of the request submitted would need to look like the diagram below (for non-priv PXP). - In the diagram, the common helper for HDCP, (GSC-Sw-Proxy) and PXP (i.e. new function intel_gsc_uc_heci_cmd_emit_mtl_header) will populate blob (C) while additional helpers, different for PPGGTT (this patch) vs GGTT (HDCP series) will populate blobs (A) and (B) below. ___________________________________________________________ (A) | MI_BATCH_BUFFER_START (ppgtt, batchbuff-addr, ...) | | | | | _|________________________________________________ | | (B)| GSC_HECI_CMD_PKT (pkt-addr-in, pkt-size-in, | | | | pkt-addr-out, pkt-size-out) |-------- | | MI_BATCH_BUFFER_END | | | | |________________________________________________| | | | | | |_________________________________________________________| | | --------------------------------------------------------- | \|/ ______V___________________________________________ | _________________________________________ | |(C)| | | | | struct intel_gsc_mtl_header { | | | | validity marker | | | | heci_clent_id | | | | ... | | | | } | | | |_______________________________________| | |(D)| | | | | struct gsc_fw_specific_api_foobar { | | | | ... | | | | For an example, see | | | | 'struct pxp43_create_arb_in' at | | | | intel_pxp_cmd_interface_43.h | | | | | | | | } | | | | Struture depends on command type | | | | struct gsc_fw_specific_api_foobar { | | | |_______________________________________| | |________________________________________________| That said, this patch provides basic helpers but leaves the PXP subsystem (i.e. the caller) to handle (D) and everything else such as input/output size verification or handling the responses from security firmware (for example, requiring a retry). Signed-off-by: -
Alan Previn authored
Add MTL hw-plumbing enabling for KCR operation under PXP which includes: 1. Updating 'pick-gt' to get the media tile for KCR interrupt handling 2. Adding MTL's KCR registers for PXP operation (init, status-checking, etc.). While doing #2, lets create a separate registers header file for PXP to be consistent with other i915 global subsystems. Signed-off-by:
-
Alan Previn authored
For MTL, the PXP back-end transport uses the GSC engine to submit HECI packets through the HW to the GSC firmware for PXP arb session management. This submission uses a non-priveleged batch buffer, a buffer for the command packet and of course a context targeting the GSC-CS. Thus for MTL, we need to allocate and free a set of execution submission resources for the management of the arbitration session. Lets start with the context creation first since that object and its usage is very straight-forward. We'll add the buffer allocation and freeing later when we introduce the gsccs' send-message function. Do this one time allocation of gsccs specific resources in a new gsccs source file with intel_pxp_gsccs_init / fini functions and hook them up from the PXP front-end. Signed-off-by:
-
- 11 May, 2023 2 commits
-
-
Fei Yang authored
Currently the KMD is using enum i915_cache_level to set caching policy for buffer objects. This is flaky because the PAT index which really controls the caching behavior in PTE has far more levels than what's defined in the enum. In addition, the PAT index is platform dependent, having to translate between i915_cache_level and PAT index is not reliable, and makes the code more complicated. From UMD's perspective there is also a necessity to set caching policy for performance fine tuning. It's much easier for the UMD to directly use PAT index because the behavior of each PAT index is clearly defined in Bspec. Having the abstracted i915_cache_level sitting in between would only cause more ambiguity. PAT is expected to work much like MOCS already works today, and by design userspace is expected to select the index that exactly matches the desired behavior described in the hardware specification. For these reasons this patch replaces i915_cache_level with PAT index. Also note, the cache_level is not completely removed yet, because the KMD still has the need of creating buffer objects with simple cache settings such as cached, uncached, or writethrough. For kernel objects, cache_level is used for simplicity and backward compatibility. For Pre-gen12 platforms PAT can have 1:1 mapping to i915_cache_level, so these two are interchangeable. see the use of LEGACY_CACHELEVEL. One consequence of this change is that gen8_pte_encode is no longer working for gen12 platforms due to the fact that gen12 platforms has different PAT definitions. In the meantime the mtl_pte_encode introduced specfically for MTL becomes generic for all gen12 platforms. This patch renames the MTL PTE encode function into gen12_pte_encode and apply it to all gen12. Even though this change looks unrelated, but separating them would temporarily break gen12 PTE encoding, thus squash them in one patch. Special note: this patch changes the way caching behavior is controlled in the sense that some objects are left to be managed by userspace. For such objects we need to be careful not to change the userspace settings.There are kerneldoc and comments added around obj->cache_coherent, cache_dirty, and how to bypass the checkings by i915_gem_object_has_cache_level. For full understanding, these changes need to be looked at together with the two follow-up patches, one disables the {set|get}_caching ioctl's and the other adds set_pat extension to the GEM_CREATE uAPI. Bspec: 63019 Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Signed-off-by:Fei Yang <fei.yang@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Fei Yang authored
This patch is a preparation for replacing enum i915_cache_level with PAT index. Caching policy for buffer objects is set through the PAT index in PTE, the old i915_cache_level is not sufficient to represent all caching modes supported by the hardware. Preparing the transition by adding some platform dependent data structures and helper functions to translate the cache_level to pat_index. cachelevel_to_pat: a platform dependent array mapping cache_level to pat_index. max_pat_index: the maximum PAT index recommended in hardware specification Needed for validating the PAT index passed in from user space. i915_gem_get_pat_index: function to convert cache_level to PAT index. obj_to_i915(obj): macro moved to header file for wider usage. I915_MAX_CACHE_LEVEL: upper bound of i915_cache_level for the convenience of coding. Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
- 08 May, 2023 3 commits
-
-
Radhakrishna Sripada authored
Fixes the right lineage number for the workaround. Fixes: a7fa1537 ("drm/i915/mtl: Implement Wa_14019141245") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230505234544.4029535-1-radhakrishna.sripada@intel.com
-
Clint Taylor authored
Add support for remapping CCS FBs on MTL to remove the restriction of the power-of-two sized stride and the 2MB surface offset alignment for these FBs. Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
-
Pallavi Mishra authored
Remove FLAT CCS check from XY_FAST_COLOR_BLT usage, thus enabling MTL to use it. Signed-off-by:
Pallavi Mishra <pallavi.mishra@intel.com> Signed-off-by:
-
- 05 May, 2023 12 commits
-
-
John Harrison authored
If the DEBUG_GEM config option is set then escalate the 'unexpected firmware version' message from a notice to an error. This will ensure that the CI system treats such occurences as a failure and logs a bug about it (or fails the pre-merge testing). Signed-off-by:
-
John Harrison authored
It was noticed that duplicate entries in the firmware table could cause an infinite loop in the firmware loading code if that entry failed to load. Duplicate entries are a bug anyway and so should never happen. Ensure they don't by tweaking the table validation code to reject duplicates. For full m/m/p files, that can be done by simply tweaking the patch level check to reject matching values. For reduced version entries, the filename itself must be compared. v2: Improve comment (review by Daniele) Signed-off-by:
-
John Harrison authored
The validation of the firmware table was being done inside the code for scanning the table for the next available firmware blob. Which is unnecessary. So pull it out into a separate function that is only called once per blob type at init time. Also, drop the CONFIG_SELFTEST requirement and make errors terminal. It was mentioned that potential issues with backports would not be caught by regular pre-merge CI as that only occurs on tip not stable branches. Making the validation unconditional and failing driver load on detecting of a problem ensures that such backports will also be validated correctly. This requires adding a firmware global flag to indicate an issue with any of the per firmware tables. This is done rather than adding a new state enum as a new enum value would be a much more invasive change - lots of places would need updating to support the new error state. Note also that this change means that a table error will cause the driver to wedge even on platforms that don't require firmware files. This is intentional as per the above backport concern - someone doing backports is not guaranteed to test on every platform that they may potential affect. So forcing a failure on all platforms ensures that the problem will be noticed and corrected immediately. v2: Change to unconditionally fail module load on a validation error (review feedback/discussion with Daniele). v3: Add a new flag to track table validation errors (review feedback/discussion with Daniele). Signed-off-by:
-
John Harrison authored
If the GuC load is taking an excessively long time, the wait loop currently prints the GT frequency. Extend that to include the GuC status as well so we can see if the GuC is actually making progress or not. Signed-off-by:
-
John Harrison authored
Explain another potential firmware failure mode and early exit the long wait if hit. Signed-off-by:
-
John Harrison authored
First release of GuC for Meteorlake. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
John Harrison authored
When reduced version firmware files were added (matching major component being the only strict requirement), the minor version was still tracked and a notification reported if it was older. However, the patch version should really be tracked as well for the same reasons. The KMD can work without the change but if the effort has been taken to release a new firmware with the change then there must be a valid reason for doing so - important bug fix, security fix, etc. And in that case it would be good to alert the user if they are missing out on that new fix. v2: Use correct patch version number and drop redunant debug print (review by Daniele / CI results). Signed-off-by:
-
Jani Nikula authored
With CONFIG_DRM_I915_WERROR=y, we enable kernel-doc check for both objects and headers. Now that the kernel-doc warnings have been fixed, also enable kernel-doc -Werror to fail the build on kernel-doc warnings. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/gem/i915_gem_ttm.h:50: warning: Function parameter or member 'bo' not described in 'i915_ttm_to_gem' v2: Fix return value documentation while at it (Rodrigo) Signed-off-by:
-
Jani Nikula authored
Can't document function pointer members as if they are functions. drivers/gpu/drm/i915/i915_scatterlist.h:160: warning: Incorrect use of kernel-doc format: * release() - Free the memory of the struct i915_refct_sgt Signed-off-by:
-
Jani Nikula authored
You can't document function pointer member as functions. drivers/gpu/drm/i915/gem/i915_gem_region.h:25: warning: Incorrect use of kernel-doc format: * process_obj - Process the current object drivers/gpu/drm/i915/gem/i915_gem_region.h:35: warning: Function parameter or member 'process_obj' not described in 'i915_gem_apply_to_region_ops' Signed-off-by:
-
Jani Nikula authored
You can't document both a sub-struct type and a struct member at the same time. Separate them. drivers/gpu/drm/i915/i915_vma_resource.h:91: warning: Incorrect use of kernel-doc format: * struct i915_vma_bindinfo - Information needed for async bind drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'bi' not described in 'i915_vma_resource' Signed-off-by:
-
- 04 May, 2023 8 commits
-
-
Daniele Ceraolo Spurio authored
The GSC notifies us of a proxy request via the HECI2 interrupt. The interrupt must be enabled both in the HECI layer and in our usual gt irq programming; for the latter, the interrupt is enabled via the same enable register as the GSC CS, but it does have its own mask register. When the interrupt is received, we also need to de-assert it in both layers. The handling of the proxy request is deferred to the same worker that we use for GSC load. New flags have been added to distinguish between the init case and the proxy interrupt. v2: Make sure not to set the reset bit when enabling/disabling the GSC interrupts, fix defines (Alan) v3: rebase on proxy status register check Signed-off-by:
-
Daniele Ceraolo Spurio authored
The GSC uC needs to communicate with the CSME to perform certain operations. Since the GSC can't perform this communication directly on platforms where it is integrated in GT, i915 needs to transfer the messages from GSC to CSME and back. The proxy flow is as follow: 1 - i915 submits a request to GSC asking for the message to CSME 2 - GSC replies with the proxy header + payload for CSME 3 - i915 sends the reply from GSC as-is to CSME via the mei proxy component 4 - CSME replies with the proxy header + payload for GSC 5 - i915 submits a request to GSC with the reply from CSME 6 - GSC replies either with a new header + payload (same as step 2, so we restart from there) or with an end message. After GSC load, i915 is expected to start the first proxy message chain, while all subsequent ones will be triggered by the GSC via interrupt. To communicate with the CSME, we use a dedicated mei component, which means that we need to wait for it to bind before we can initialize the proxies. This usually happens quite fast, but given that there is a chance that we'll have to wait a few seconds the GSC work has been moved to a dedicated WQ to not stall other processes. v2: fix code style, includes and variable naming (Alan) v3: add extra check for proxy status, fix includes and comments Signed-off-by: -
Alexander Usyskin authored
Add GSC proxy driver. It to allows messaging between GSC component on Intel graphics card and CSE device. Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Alexander Usyskin authored
GSC Proxy component is used for communication between the Intel graphics driver and MEI driver. Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/i915_scatterlist.h:164: warning: Function parameter or member 'release' not described in 'i915_refct_sgt_ops' drivers/gpu/drm/i915/i915_scatterlist.h:187: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_put' drivers/gpu/drm/i915/i915_scatterlist.h:198: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_get' drivers/gpu/drm/i915/i915_scatterlist.h:214: warning: Function parameter or member 'rsgt' not described in '__i915_refct_sgt_init' Signed-off-by:
-
Jani Nikula authored
Add /** to make it a kernel-doc. drivers/gpu/drm/i915/pxp/intel_pxp_types.h:96: warning: Function parameter or member 'dev_link' not described in 'intel_pxp' Signed-off-by:
-
Jani Nikula authored
The comments are closer to not being kernel-doc. drivers/gpu/drm/i915/i915_pmu.h:21: warning: cannot understand function prototype: 'enum i915_pmu_tracked_events ' drivers/gpu/drm/i915/i915_pmu.h:32: warning: cannot understand function prototype: 'enum ' drivers/gpu/drm/i915/i915_pmu.h:41: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * How many different events we track in the global PMU mask. Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'active' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fence' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fn' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'active' not described in 'i915_active_fence_set' drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'rq' not described in 'i915_active_fence_set' drivers/gpu/drm/i915/i915_active.h:102: warning: Function parameter or member 'active' not described in 'i915_active_fence_get' drivers/gpu/drm/i915/i915_active.h:122: warning: Function parameter or member 'active' not described in 'i915_active_fence_isset' Signed-off-by:
-
