Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.

This helper will be used for userspace dump addresses tests.
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:

        pm_nl_ctl dump

This patch adds token argument for it to support userspace PM:

        pm_nl_ctl dump token $token

If 'token $token' is passed to dump_addr(), copy it into the kernel
netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the address flag MPTCP_PM_ADDR_FLAG_SUBFLOW in csf() in
pm_nl_ctl.c when subflow is created by a userspace PM.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just like MPTCP_PM_ADDR_FLAG_SIGNAL flag is checked in userspace PM
announce mptcp_pm_nl_announce_doit(), PM flags should be checked in
mptcp_pm_nl_subflow_create_doit() too.

If MPTCP_PM_ADDR_FLAG_SUBFLOW flag is not set, there's no flags field
in the output of dump_addr. This looks a bit strange:

        id 10 flags  10.0.3.2

This patch uses mptcp_pm_parse_entry() instead of mptcp_pm_parse_addr()
to get the PM flags of the entry and check it. MPTCP_PM_ADDR_FLAG_SIGNAL
flag shouldn't be set here, and if MPTCP_PM_ADDR_FLAG_SUBFLOW flag is
missing from the netlink attribute, always set this flag.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch renames mptcp_pm_nl_get_addr_dumpit() as a dedicated in-kernel
netlink PM dump addrs function mptcp_pm_nl_dump_addr(), and invoke a newly
added wrapper mptcp_pm_dump_addr() in mptcp_pm_nl_get_addr_dumpit().

Invoke in-kernel PM dump addrs function mptcp_pm_nl_dump_addr() or
userspace PM dump addrs function mptcp_userspace_pm_dump_addr() based on
whether the token parameter is passed in or not in the wrapper.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds token parameter together with addr in get-addr section in
mptcp_pm.yaml, then use the following commands to update mptcp_pm_gen.c
and mptcp_pm_gen.h:

./tools/net/ynl/ynl-gen-c.py --mode kernel \
        --spec Documentation/netlink/specs/mptcp_pm.yaml --source \
        -o net/mptcp/mptcp_pm_gen.c
./tools/net/ynl/ynl-gen-c.py --mode kernel \
        --spec Documentation/netlink/specs/mptcp_pm.yaml --header \
        -o net/mptcp/mptcp_pm_gen.h
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implements mptcp_userspace_pm_dump_addr() to dump addresses
from userspace pm address list. Use mptcp_token_get_sock() to get the
msk from the given token, if userspace PM is enabled in it, traverse
each address entry in address list, put every entry to userspace using
mptcp_pm_nl_put_entry_msg().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch exports struct mptcp_genl_family and mptcp_nl_fill_addr() helper
to allow them can be used in pm_userspace.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp_pm_remove_addrs_and_subflows() is only used in pm_netlink.c, it's
no longer used in pm_userspace.c any more since the commit 8b1c94da
("mptcp: only send RM_ADDR in nl_cmd_remove"). So this patch changes it
to a static function.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: simplify device pointer access

This version of this patch series fixes the bugs in the first patch
(which were fixed in the second), where ipa_interrupt_config() had
two remaining spots that returned a pointer rather than an integer.

Outside of initialization, all uses of the platform device pointer
stored in the IPA structure determine the address of device
structure embedded within the platform device structure.

By changing some of the initialization functions to take a platform
device as argument we can simplify getting at the device structure
address by storing it (instead of the platform device pointer) in
the IPA structure.

The first two patches split the interrupt initialization code into
two parts--one done earlier than before.  The next four patches
update some initialization functions to take a platform device
pointer as argument.  And the last patch replaces the platform
device pointer with a device pointer, and converts all remaining
references to the &ipa->pdev->dev to use ipa->dev.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The IPA platform device is now only used as the structure containing
the IPA device structure.  Replace the platform device pointer with
a pointer to the device structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_smp2p_init().  Use
that pointer throughout that function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_smp2p_irq_init().
Use that pointer throughout that function (without assuming it's
the same as the IPA platform device pointer).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_mem_init().  Use
that pointer throughout that function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_reg_init().  Use
that pointer throughout that function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a new function ipa_interrupt_init() that is called at probe
time to allocate and initialize the IPA interrupt data structure.
Create ipa_interrupt_exit() as its inverse.

This follows the normal IPA driver pattern of *_init() functions
doing things that can be done before access to hardware is required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the return type of ipa_interrupt_config() to be an error
code rather than an IPA interrupt structure pointer, and assign the
the pointer within that function.

Change ipa_interrupt_deconfig() to take the IPA pointer as argument
and have it invalidate the ipa->interrupt pointer.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Matthieu Baerts says:

====================
mptcp: add TCP_NOTSENT_LOWAT sockopt support

Patch 3 does the magic of adding TCP_NOTSENT_LOWAT support, all the
other ones are minor cleanup seen along when working on the new
feature.

Note that this feature relies on the existing accounting for snd_nxt.
Such accounting is not 110% accurate as it tracks the most recent
sequence number queued to any subflow, and not the actual sequence
number sent on the wire. Paolo experimented a lot, trying to implement
the latter, and in the end it proved to be both "too complex" and "not
necessary".

The complexity raises from the need for additional lock and a lot of
refactoring to introduce such protections without adding significant
overhead. Additionally, snd_nxt is currently used and exposed with the
current semantic by the internal packet scheduling. Introducing a
different tracking will still require us to keep the old one.

More interestingly, a more accurate tracking could be not strictly
necessary: as the MPTCP socket enqueues data to the subflows only up
to the available send window, any enqueue data is sent on the wire
instantly, without any blocking operation short or a drop in the tx
path at the nft or TC layer.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>

Most TCP-level socket options get an integer from user space, and
set the corresponding field under the msk-level socket lock.

Reduce the code duplication moving such operations in the common code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for such socket option storing the user-space provided
value in a new msk field, and using such data to implement the
_mptcp_stream_memory_free() helper, similar to the TCP one.

To avoid adding more indirect calls in the fast path, open-code
a variant of sk_stream_memory_free() in mptcp_sendmsg() and add
direct calls to the mptcp stream memory free helper where possible.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/464Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mptcp_get_int_option() helper is needless open-coded in a
couple of places, replace the duplicate code with the helper
call.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 5cf92bba ("mptcp: re-enable sndbuf autotune"), the
MPTCP_NOSPACE bit is redundant: it is always set and cleared together with
SOCK_NOSPACE.

Let's drop the first and always relay on the latter, dropping a bunch
of useless code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not set rtnl_link_stats64 fields to zero, since they are zeroed
before ops->ndo_get_stats64 is called in core dev_get_stats() function.

Also, simplify the data collection by removing the temporary variable.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

With commit 34d21de9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the nlmon driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The last patch which added support to extend the firmware shared
data to add channel data information has introduced a bug due to
the reserved space not adjusted accordingly.

This patch fixes the issue and also adds BUILD_BUG to avoid this
regression error.

Fixes: 99781449 ("Octeontx2-af: Fetch MAC channel info from firmware")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct net_device poll_dev in struct igc_q_vector was added
in one of the initial commits, but never used.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ziwei Xiao says:

====================
gve: Add header split support

Currently, the ethtool's ringparam has added a new field
tcp-data-split for enabling and disabling header split. These three
patches will utilize that ethtool flag to support header split in GVE
driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

To record the stats of header split packets, three stats are added in
the driver's ethtool stats.

- rx_hsplit_pkt is the split packets count with header split
- rx_hsplit_bytes is the received header bytes count with header split
- rx_hsplit_unsplit_pkt is the unsplit packet count due to header buffer
  overflow or zero header length when header split is enabled

Currently, it's entering the stats_update critical section more than
once per packet. We have plans to avoid that in the future change to let
all the stats_update happen in one place at the end of
`gve_rx_poll_dqo`.
Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add header buffers and ethtool support to enable header split via the
tcp-data-split flag in ethtool's ringparam config. A coherent dma memory
is allocated for the header buffers. There is one header buffer per ring
entry by calculating the offset to the header-buffers starting address.
The header buffer is always copied directly into the skb and payload is
always added as frags. When there is a header buffer overflow or the
header length is 0, the driver places the whole unsplit packet in frags.

When toggling header split, the driver will call gve_adjust_config to
set its queues appropriately. If header split is enabled by the user and
the max packet buffer size is no less than 4KB, driver will set the
packet buffer size as 4KB to support TCP_ZEROCOPY_RECEIVE. Otherwise the
driver will use the default 2KB as the packet buffer size.

`ethtool -G <dev> tcp-data-split on/off` is the command to toggle header
split.
`ethtool -g <dev>` will show the status of header split with the field
of `tcp-data-split`.
Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To enable header split via ethtool, we first need to query the device to
get the max rx buffer size and header buffer size. Add a device option
to get these values and store them in the driver. If the header buffer
size received from the device is non-zero, it means header split is
supported in the device.

Currently the max rx buffer size will only be used when header split is
enabled which will set the data_buffer_size_dqo to be the max rx buffer
size. Also change the data_buffer_size_dqo from int to u16 since we are
modifying it and making it to be consistent with max_rx_buffer_size.
Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With commit 34d21de9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the ip6_tunnel driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: code cleanup and performance tuning

Brett has been performance testing and code tweaking and has
come up with several improvements for our fast path operations.

In a simple single thread / single queue iperf case on a 1500 MTU
connection we see an improvement from 74.2 to 86.7 Gbits/sec.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The MODULE_AUTHOR macro is supposed to be a person
not a company.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clean up complaints from an xmastree.py scan.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the kernel's CQE dim table to align better with the
driver's use of completion queues, and use the tx moderation
when using Tx interrupts.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An earlier change moved the hwstamp queue check into a helper
function with an unlikely(). However, it makes more sense for
the caller to decide if it's likely() or unlikely(), so make
the change to support that.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To help make sure we're only accessing things we really need
to access we can cut down on the q->lif->netdev references by
using q->dev which is already in cache.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using q->lif->netdev, just pass the netdev when it's
locally defined.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If there is a lot of transmit traffic the driver can get into a
situation that the device is starved due to the doorbell never
being rung. This can happen if xmit_more is set constantly
and __netdev_tx_sent_queue() keeps returning false. Fix this
by checking if the queue needs to be stopped right before
calling __netdev_tx_sent_queue(). Use MAX_SKB_FRAGS + 1 as the
stop condition because that's the maximum number of frags
supported for non-TSO transmit.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver currently calls netdev_tx_completed_queue() for every
Tx completion. However, this API is only meant to be called once
per NAPI if any Tx work is done.  Make the necessary changes to
support calling netdev_tx_completed_queue() only once per NAPI.

Also, use the __netdev_tx_sent_queue() API, which supports the
xmit_more functionality.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>