- 30 May, 2024 10 commits
-
-
Shay Agroskin authored
The driver overrides the NUMA node id of the device regardless of whether it knows its correct value (often setting it to -1 even though the node id is advertised in 'struct device'). This can lead to suboptimal configurations. This patch fixes this behavior and makes the shared memory allocation functions use the NUMA node id advertised by the underlying device. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20240528170912.1204417-1-shayagr@amazon.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates 2024-05-28 (e1000e, i40e, ice) [part] This series includes a variety of fixes that have been accumulating on the Intel Wired LAN dev-queue. Hui Wang provides a fix for suspend/resume on e1000e due to failure to correctly setup the SMBUS in enable_ulp(). Thinh Tran provides a fix for EEH I/O suspend/resume on i40e to ensure that I/O operations can continue after a resume. To avoid duplicate code, the common logic is factored out of i40e_suspend and i40e_resume. Paul Greenwalt provides a fix to correctly map the 200G PHY types to link speeds in the ice driver. Dave Ertman provides a fix correcting devlink parameter unregistration in the event that the driver loads in safe mode and some of the parameters were not registered. ==================== Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-0-dc8593d2bbc6@intel.comSigned-off-by:
-
Dave Ertman authored
On module load, the ice driver checks for the lack of a specific PF capability to determine if it should reduce the number of devlink params to register. One situation when this test returns true is when the driver loads in safe mode. The same check is not present on the unload path when devlink params are unregistered. This results in the driver triggering a WARN_ON in the kernel devlink code. The current check and code path uses a reduction in the number of elements reported in the list of params. This is fragile and not good for future maintaining. Change the parameters to be held in two lists, one always registered and one dependent on the check. Add a symmetrical check in the unload path so that the correct parameters are unregistered as well. Fixes: 109eb291 ("ice: Add tx_scheduling_layers devlink param") CC: Lukasz Czapnik <lukasz.czapnik@intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by:
-
Paul Greenwalt authored
Commit 24407a01 ("ice: Add 200G speed/phy type use") added support for 200G PHY speeds, but did not include the mapping of 200G PHY types to link speed. As a result the driver is returning UNKNOWN link speed when setting 200G ethtool advertised link modes. To fix this add 200G PHY types to link speed mapping to ice_get_link_speed_based_on_phy_type(). Fixes: 24407a01 ("ice: Add 200G speed/phy type use") Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
Paul Greenwalt <paul.greenwalt@intel.com> Tested-by:
-
Thinh Tran authored
When EEH events occurs, the callback functions in the i40e, which are managed by the EEH driver, will completely suspend and resume all IO operations. - In the PCI error detected callback, replaced i40e_prep_for_reset() with i40e_io_suspend(). The change is to fully suspend all I/O operations - In the PCI error slot reset callback, replaced pci_enable_device_mem() with pci_enable_device(). This change enables both I/O and memory of the device. - In the PCI error resume callback, replaced i40e_handle_reset_warning() with i40e_io_resume(). This change allows the system to resume I/O operations Fixes: a5f3d2c1 ("powerpc/pseries/pci: Add MSI domains") Reviewed-by:
Robert Thomas <rob.thomas@ibm.com> Signed-off-by:
Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by:
-
Thinh Tran authored
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been introduced. These functions were factored out from the existing i40e_suspend() and i40e_resume() respectively. This factoring was done due to concerns about the logic of the I40E_SUSPENSED state, which caused the device to be unable to recover. The functions are now used in the EEH handling for device suspend/resume callbacks. The function i40e_enable_mc_magic_wake() has been moved ahead of i40e_io_suspend() to ensure it is declared before being used. Tested-by:
-
Hui Wang authored
The commit 861e8086 ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") introduces a regression on PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the ethernet works well after suspend and resume, but after applying the commit, the ethernet couldn't work anymore after the resume and the dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally): [ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx Without the commit, the force SMBUS code will not be executed if "return 0" or "goto out" is executed in the enable_ulp(), and in my case, the "goto out" is executed since FWSM_FW_VALID is set. But after applying the commit, the force SMBUS code will be ran unconditionally. Here move the force SMBUS code back to enable_ulp() and put it immediately ahead of hw->phy.ops.release(hw), this could allow the longest settling time as possible for interface in this function and doesn't change the original code logic. The issue was found on a Lenovo laptop with the ethernet hw as below: 00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a] (rev 20). And this patch is verified (cable plug and unplug, system suspend and resume) on Lenovo laptops with ethernet hw: [8086:550a], [8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and [8086:0dc7]. Fixes: 861e8086 ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Acked-by:
Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Tristram Ha authored
The driver should return RMII interface when XMII is running in RMII mode. Fixes: 0ab7f6bf ("net: dsa: microchip: ksz9477: use common xmii function") Signed-off-by:
Tristram Ha <tristram.ha@microchip.com> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Acked-by:
Jerry Ray <jerry.ray@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.comSigned-off-by:
-
Alexander Mikhalitsyn authored
A recent change to inet_dump_ifaddr had the function incorrectly iterate over net rather than tgt_net, resulting in the data coming for the incorrect network namespace. Fixes: cdb2f80f ("inet: use xa_array iterator to implement inet_dump_ifaddr()") Reported-by:
Stéphane Graber <stgraber@stgraber.org> Closes: https://github.com/lxc/incus/issues/892Bisected-by:
Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Tested-by:
Christian Brauner <brauner@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240528203030.10839-1-aleksandr.mikhalitsyn@canonical.comSigned-off-by:
-
Eric Dumazet authored
__dst_negative_advice() does not enforce proper RCU rules when sk->dst_cache must be cleared, leading to possible UAF. RCU rules are that we must first clear sk->sk_dst_cache, then call dst_release(old_dst). Note that sk_dst_reset(sk) is implementing this protocol correctly, while __dst_negative_advice() uses the wrong order. Given that ip6_negative_advice() has special logic against RTF_CACHE, this means each of the three ->negative_advice() existing methods must perform the sk_dst_reset() themselves. Note the check against NULL dst is centralized in __dst_negative_advice(), there is no need to duplicate it in various callbacks. Many thanks to Clement Lecigne for tracking this issue. This old bug became visible after the blamed commit, using UDP sockets. Fixes: a87cb3e4 ("net: Facility to report route quality of connected sockets") Reported-by:
Clement Lecigne <clecigne@google.com> Diagnosed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.comSigned-off-by:
-
- 29 May, 2024 4 commits
-
-
Edward Adam Davis authored
write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf) Syzbot constructed a write() call with a data length of 3 bytes but a count value of 15, which passed too little data to meet the basic requirements of the function nci_rf_intf_activated_ntf_packet(). Therefore, increasing the comparison between data length and count value to avoid problems caused by inconsistent data length and count. Reported-and-tested-by: syzbot+71bfed2b2bcea46c98f2@syzkaller.appspotmail.com Signed-off-by:
Edward Adam Davis <eadavis@qq.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Minda Chen authored
Update the maintainer of starfive dwmac driver. Signed-off-by:
Minda Chen <minda.chen@starfivetech.com> Acked-by:
Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by:
-
Vladimir Oltean authored
It is possible for syzbot to side-step the restriction imposed by the blamed commit in the Fixes: tag, because the taprio UAPI permits a cycle-time different from (and potentially shorter than) the sum of entry intervals. We need one more restriction, which is that the cycle time itself must be larger than N * ETH_ZLEN bit times, where N is the number of schedule entries. This restriction needs to apply regardless of whether the cycle time came from the user or was the implicit, auto-calculated value, so we move the existing "cycle == 0" check outside the "if "(!new->cycle_time)" branch. This way covers both conditions and scenarios. Add a selftest which illustrates the issue triggered by syzbot. Fixes: b5b73b26 ("taprio: Fix allowing too small intervals") Reported-by: syzbot+a7d2b1d5d1af83035567@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000007d66bc06196e7c66@google.com/Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20240527153955.553333-2-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
In commit b5b73b26 ("taprio: Fix allowing too small intervals"), a comparison of user input against length_to_duration(q, ETH_ZLEN) was introduced, to avoid RCU stalls due to frequent hrtimers. The implementation of length_to_duration() depends on q->picos_per_byte being set for the link speed. The blamed commit in the Fixes: tag has moved this too late, so the checks introduced above are ineffective. The q->picos_per_byte is zero at parse_taprio_schedule() -> parse_sched_list() -> parse_sched_entry() -> fill_sched_entry() time. Move the taprio_set_picos_per_byte() call as one of the first things in taprio_change(), before the bulk of the netlink attribute parsing is done. That's because it is needed there. Add a selftest to make sure the issue doesn't get reintroduced. Fixes: 09dbdf28 ("net/sched: taprio: fix calculation of maximum gate durations") Signed-off-by:
-
- 28 May, 2024 12 commits
-
-
MD Danish Anwar authored
The start counter for FT1 filter is wrongly set to 0 in the driver. FT1 is used for source address violation (SAV) check and source address starts at Byte 6 not Byte 0. Fix this by changing start counter to ETH_ALEN in icssg_ft1_set_mac_addr(). Fixes: e9b4ece7 ("net: ti: icssg-prueth: Add Firmware config and classification APIs.") Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/20240527063015.263748-1-danishanwar@ti.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Thadeu Lima de Souza Cascardo authored
sk_psock_get will return NULL if the refcount of psock has gone to 0, which will happen when the last call of sk_psock_put is done. However, sk_psock_drop may not have finished yet, so the close callback will still point to sock_map_close despite psock being NULL. This can be reproduced with a thread deleting an element from the sock map, while the second one creates a socket, adds it to the map and closes it. That will trigger the WARN_ON_ONCE: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 7220 at net/core/sock_map.c:1701 sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701 Modules linked in: CPU: 1 PID: 7220 Comm: syz-executor380 Not tainted 6.9.0-syzkaller-07726-g3c999d1a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701 Code: df e8 92 29 88 f8 48 8b 1b 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 79 29 88 f8 4c 8b 23 eb 89 e8 4f 15 23 f8 90 <0f> 0b 90 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d e9 13 26 3d 02 RSP: 0018:ffffc9000441fda8 EFLAGS: 00010293 RAX: ffffffff89731ae1 RBX: ffffffff94b87540 RCX: ffff888029470000 RDX: 0000000000000000 RSI: ffffffff8bcab5c0 RDI: ffffffff8c1faba0 RBP: 0000000000000000 R08: ffffffff92f9b61f R09: 1ffffffff25f36c3 R10: dffffc0000000000 R11: fffffbfff25f36c4 R12: ffffffff89731840 R13: ffff88804b587000 R14: ffff88804b587000 R15: ffffffff89731870 FS: 000055555e080380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000207d4000 CR4: 0000000000350ef0 Call Trace: <TASK> unix_release+0x87/0xc0 net/unix/af_unix.c:1048 __sock_release net/socket.c:659 [inline] sock_close+0xbe/0x240 net/socket.c:1421 __fput+0x42b/0x8a0 fs/file_table.c:422 __do_sys_close fs/open.c:1556 [inline] __se_sys_close fs/open.c:1541 [inline] __x64_sys_close+0x7f/0x110 fs/open.c:1541 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb37d618070 Code: 00 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d4 e8 10 2c 00 00 80 3d 31 f0 07 00 00 74 17 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c RSP: 002b:00007ffcd4a525d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fb37d618070 RDX: 0000000000000010 RSI: 00000000200001c0 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000100000000 R09: 0000000100000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Use sk_psock, which will only check that the pointer is not been set to NULL yet, which should only happen after the callbacks are restored. If, then, a reference can still be gotten, we may call sk_psock_stop and cancel psock->work. As suggested by Paolo Abeni, reorder the condition so the control flow is less convoluted. After that change, the reproducer does not trigger the WARN_ON_ONCE anymore. Suggested-by:
Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Acked-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20240524144702.1178377-1-cascardo@igalia.comSigned-off-by:
-
Thorsten Blum authored
s/of/off/ Signed-off-by:
Thorsten Blum <thorsten.blum@toblux.com> Fixes: e110ba65 ("docs: netdev: add note about Changes Requested and revising commit messages") Link: https://lore.kernel.org/r/20240527103618.265801-2-thorsten.blum@toblux.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== selftests: mptcp: mark unstable subtests as flaky Some subtests can be unstable, failing once every X runs. Fixing them can take time: there could be an issue in the kernel or in the subtest, and it is then important to do a proper analysis, not to hide real bugs. To avoid creating noises on the different CIs where tests are more unstable than on our side, some subtests have been marked as flaky. As a result, errors with these subtests (if any) are ignored. Note that the MPTCP CI will continue to track these flaky subtests. All these unstable subtests are also tracked by our bug tracker. These are fixes for the -net tree, because the instabilities are visible there. The first patch introducing the flake support has no 'Fixes' tags, mainly because it requires recent and important refactoring done in all MPTCP selftests. Backporting that to old versions where the flaky tests have been introduced would be too difficult, and probably not worth it. The other patches, adding MPTCP_LIB_SUBTEST_FLAKY=1, have a Fixes tag, simply to ease the backport of the future fixes removing them along with the proper fix. ==================== Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-0-a352362f3f8e@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
These tests are rarely unstable. It depends on the CI running the tests, especially if it is also busy doing other tasks in parallel, and if a debug kernel config is being used. It looks like this issue is sometimes present with the NetDev CI. While this is being investigated, the tests are marked as flaky not to create noises on such CIs. Fixes: b6e074e1 ("selftests: mptcp: add infinite map testcase") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/491Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-4-a352362f3f8e@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
These tests are flaky since their introduction. This might be less or not visible depending on the CI running the tests, especially if it is also busy doing other tasks in parallel, and if a debug kernel config is being used. It looks like this issue is often present with the NetDev CI. While this is being investigated, the tests are marked as flaky not to create noises on such CIs. Fixes: 01542c9b ("selftests: mptcp: add fastclose testcase") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/324Reviewed-by:
-
Matthieu Baerts (NGI0) authored
These tests are flaky since their introduction. This might be less or not visible depending on the CI running the tests, especially if it is also busy doing other tasks in parallel. A first analysis shown that the transfer can be slowed down when there are some re-injections at the MPTCP level. Such re-injections can of course happen, and disturb the transfer, but it looks strange to have them in this lab. That could be caused by the kernel having access to less CPU cycles -- e.g. when other activities are executed in parallel -- or by a misinterpretation on the MPTCP packet scheduler side. While this is being investigated, the tests are marked as flaky not to create noises in other CIs. Fixes: 219d0499 ("mptcp: push pending frames when subflow has free space") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/475Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Some subtests can be unstable, failing once every X runs. Fixing them can take time: there could be an issue in the kernel or in the subtest, and it is then important to do a proper analysis, not to hide real bugs. To avoid creating noises on the different CIs, it is important to have a simple way to mark subtests as flaky, and ignore the errors. This is what this patch introduces: subtests can be marked as flaky by setting MPTCP_LIB_SUBTEST_FLAKY env var to 1, e.g. MPTCP_LIB_SUBTEST_FLAKY=1 <run flaky subtest> The subtest will be executed, and errors (if any) will be ignored. It is still good to run these subtests, as it exercises code, and the results can still be useful for the on-going investigations. Note that the MPTCP CI will continue to track these flaky subtests by setting SELFTESTS_MPTCP_LIB_OVERRIDE_FLAKY env var to 1, and a ticket has to be created before marking subtests as flaky. Reviewed-by:
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates 2024-05-23 (ice, idpf) This series contains two fixes which finished up testing. First, Alexander fixes an issue in idpf caused by enabling NAPI and interrupts prior to actually allocating the Rx buffers. Second, Jacob fixes the ice driver VSI VLAN counting logic to ensure that addition and deletion of VLANs properly manages the total VSI count. ==================== Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-0-17a923e0bb5f@intel.comSigned-off-by:
-
Jacob Keller authored
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target VSI. This function prepares a filter in the switch table for the given VSI. If it succeeds, the vsi->num_vlan counter is incremented. It is not considered an error to add a VLAN which already exists in the switch table, so the function explicitly checks and ignores -EEXIST. The vsi->num_vlan counter is still incremented. This seems incorrect, as it means we can double-count in the case where the same VLAN is added twice by the caller. The actual table will have one less filter than the count. The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT condition for when deleting a filter that doesn't exist. This flow only decrements the vsi->num_vlan if it actually deleted a filter. The vsi->num_vlan counter is used only in a few places, primarily related to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs than are present, and ice_vsi_has_non_zero_vlans() could return true potentially in cases where there are only VLAN 0 filters left. Fix this by only incrementing the vsi->num_vlan in the case where we actually added an entry, and not in the case where the entry already existed. Fixes: a1ffafb0 ("ice: Support configuring the device to Double VLAN Mode") Signed-off-by:
-
Alexander Lobakin authored
Currently, idpf enables NAPI and interrupts prior to allocating Rx buffers. This may lead to frame loss (there are no buffers to place incoming frames) and even crashes on quick ifup-ifdown. Interrupts must be enabled only after all the resources are here and available. Split interrupt init into two phases: initialization and enabling, and perform the second only after the queues are fully initialized. Note that we can't just move interrupt initialization down the init process, as the queues must have correct a ::q_vector pointer set and NAPI already added in order to allocate buffers correctly. Also, during the deinit process, disable HW interrupts first and only then disable NAPI. Otherwise, there can be a HW event leading to napi_schedule(), but the NAPI will already be unavailable. Fixes: d4d55871 ("idpf: initialize interrupts and enable vport") Reported-by:
Michal Kubiak <michal.kubiak@intel.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
-
Alexander Lobakin authored
After the tagged commit, @netdev got documented twice and the kdoc script didn't notice that. Remove the second description added later and move the initial one according to the field position. After merging commit 5f8e4007 ("kernel-doc: fix struct_group_tagged() parsing"), kdoc requires to describe struct groups as well. &page_pool_params has 2 struct groups which generated new warnings, describe them to resolve this. Fixes: 403f11ac ("page_pool: don't use driver-set flags field directly") Signed-off-by:
-
- 27 May, 2024 14 commits
-
-
Horatiu Vultur authored
When the interrupt is enabled, the function lan8841_config_intr tries to clear any pending interrupts by reading the interrupt status, then checks the return value for errors and then continue to enable the interrupt. It has been seen that once the system gets out of sleep mode, the interrupt status has the value 0x400 meaning that the PHY detected that the link was in low power. That is correct value but the problem is that the check is wrong. We try to check for errors but we return an error also in this case which is not an error. Therefore fix this by returning only when there is an error. Fixes: a8f1a19d ("net: micrel: Add support for lan8841 PHY") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Suman Ghosh <sumang@marvell.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240524085350.359812-1-horatiu.vultur@microchip.comSigned-off-by:
-
Xiaolei Wang authored
When fec_probe() fails or fec_drv_remove() needs to release the fec queue and remove a NAPI context, therefore add a function corresponding to fec_enet_init() and call fec_enet_deinit() which does the opposite to release memory and remove a NAPI context. Fixes: 59d0f746 ("net: fec: init multi queue date structure") Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
-
Rob Herring (Arm) authored
The child nodes are missing "additionalProperties" constraints which means any undocumented properties or child nodes are allowed. Add the constraints and all the undocumented properties exposed by the fix. Fixes: f562202f ("dt-bindings: net: pse-pd: Add bindings for TPS23881 PSE controller") Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Acked-by:
Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240523171750.2837331-1-robh@kernel.orgSigned-off-by:
-
Rob Herring (Arm) authored
The child nodes are missing "additionalProperties" constraints which means any undocumented properties or child nodes are allowed. Add the constraints, and fix the fallout of wrong manager node regex and missing properties. Fixes: 9c1de033 ("dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller") Signed-off-by:
-
Eric Dumazet authored
Jason commit made checks against ACK sequence less strict and can be exploited by attackers to establish spoofed flows with less probes. Innocent users might use tcp_rmem[1] == 1,000,000,000, or something more reasonable. An attacker can use a regular TCP connection to learn the server initial tp->rcv_wnd, and use it to optimize the attack. If we make sure that only the announced window (smaller than 65535) is used for ACK validation, we force an attacker to use 65537 packets to complete the 3WHS (assuming server ISN is unknown) Fixes: 378979e9 ("tcp: remove 64 KByte limit for initial tp->rcv_wnd value") Link: https://datatracker.ietf.org/meeting/119/materials/slides-119-tcpm-ghost-acks-00Signed-off-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20240523130528.60376-1-edumazet@google.comSigned-off-by:
-
Willem de Bruijn authored
Syzkaller was able to trigger kernel BUG at net/core/gro.c:424 ! RIP: 0010:gro_pull_from_frag0 net/core/gro.c:424 [inline] RIP: 0010:gro_try_pull_from_frag0 net/core/gro.c:446 [inline] RIP: 0010:dev_gro_receive+0x242f/0x24b0 net/core/gro.c:571 Due to using an incorrect NAPI_GRO_CB(skb)->network_offset. The referenced commit sets this offset to 0 in skb_gro_reset_offset. That matches the expected case in dev_gro_receive: pp = INDIRECT_CALL_INET(ptype->callbacks.gro_receive, ipv6_gro_receive, inet_gro_receive, &gro_list->list, skb); But syzkaller injected an skb with protocol ETH_P_TEB into an ip6gre device (by writing the IP6GRE encapsulated version to a TAP device). The result was a first call to eth_gro_receive, and thus an extra ETH_HLEN in network_offset that should not be there. First issue hit is when computing offset from network header in ipv6_gro_pull_exthdrs. Initialize both offsets in the network layer gro_receive. This pairs with all reads in gro_receive, which use skb_gro_receive_network_offset(). Fixes: 186b1ea7 ("net: gro: use cb instead of skb->network_header") Reported-by:syzkaller <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> CC: Richard Gobert <richardbgobert@gmail.com> Reviewed-by:
-
Ido Schimmel authored
Cited commit started returning an error when user space requests to dump the interface's IPv4 addresses and IPv4 is disabled on the interface. Restore the previous behavior and do not return an error. Before cited commit: # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff inet6 fe80::e040:68ff:fe98:d018/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # ip link set dev dummy1 mtu 67 # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff After cited commit: # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 32:2d:69:f2:9c:99 brd ff:ff:ff:ff:ff:ff inet6 fe80::302d:69ff:fef2:9c99/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # ip link set dev dummy1 mtu 67 # ip address show dev dummy1 RTNETLINK answers: No such device Dump terminated With this patch: # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff inet6 fe80::dc17:56ff:febb:57c0/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # ip link set dev dummy1 mtu 67 # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff I fixed the exact same issue for IPv6 in commit c04f7dfe ("ipv6: Fix address dump when IPv6 is disabled on an interface"), but noted [1] that I am not doing the change for IPv4 because I am not aware of a way to disable IPv4 on an interface other than unregistering it. I clearly missed the above case. [1] https://lore.kernel.org/netdev/20240321173042.2151756-1-idosch@nvidia.com/ Fixes: cdb2f80f ("inet: use xa_array iterator to implement inet_dump_ifaddr()") Reported-by:Carolina Jubran <cjubran@nvidia.com> Reported-by:
Yamen Safadi <ysafadi@nvidia.com> Tested-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-05-27 We've added 15 non-merge commits during the last 7 day(s) which contain a total of 18 files changed, 583 insertions(+), 55 deletions(-). The main changes are: 1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread while the promise was to filter by process, from Andrii Nakryiko. 2) Fix the recent influx of syzkaller reports to sockmap which triggered a locking rule violation by performing a map_delete, from Jakub Sitnicki. 3) Fixes to netkit driver in particular on skb->pkt_type override upon pass verdict, from Daniel Borkmann. 4) Fix an integer overflow in resolve_btfids which can wrongly trigger build failures, from Friedrich Vock. 5) Follow-up fixes for ARC JIT reported by static analyzers, from Shahab Vahedi. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Cover verifier checks for mutating sockmap/sockhash Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem" bpf: Allow delete from sockmap/sockhash only if update is allowed selftests/bpf: Add netkit test for pkt_type selftests/bpf: Add netkit tests for mac address netkit: Fix pkt_type override upon netkit pass verdict netkit: Fix setting mac address in l2 mode ARC, bpf: Fix issues reported by the static analyzers selftests/bpf: extend multi-uprobe tests with USDTs selftests/bpf: extend multi-uprobe tests with child thread case libbpf: detect broken PID filtering logic for multi-uprobe bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic bpf: fix multi-uprobe PID filtering logic bpf: Fix potential integer overflow in resolve_btfids MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT ==================== Link: https://lore.kernel.org/r/20240527203551.29712-1-daniel@iogearbox.netSigned-off-by:
-
Jakub Sitnicki authored
Verifier enforces that only certain program types can mutate sock{map,hash} maps, that is update it or delete from it. Add test coverage for these checks so we don't regress. Signed-off-by:Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-3-944b372f2101@cloudflare.com
-
Jakub Sitnicki authored
This reverts commit ff910599. This check is no longer needed. BPF programs attached to tracepoints are now rejected by the verifier when they attempt to delete from a sockmap/sockhash maps. Signed-off-by:
-
Jakub Sitnicki authored
We have seen an influx of syzkaller reports where a BPF program attached to a tracepoint triggers a locking rule violation by performing a map_delete on a sockmap/sockhash. We don't intend to support this artificial use scenario. Extend the existing verifier allowed-program-type check for updating sockmap/sockhash to also cover deleting from a map. From now on only BPF programs which were previously allowed to update sockmap/sockhash can delete from these map types. Fixes: ff910599 ("bpf, sockmap: Prevent lock inversion deadlock in map delete elem") Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com Signed-off-by:
-
Parthiban Veerasooran authored
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration register is used to determine the functionality of external LED pins (Speed Indicator, Link and Activity Indicator, Full Duplex Link Indicator). The default value for this bit is 0 when no EEPROM is present. If a EEPROM is present, the default value is the value of the LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or Lite Reset (LRST) will cause this bit to be restored to the image value last loaded from EEPROM, or to be set to 0 if no EEPROM is present. While configuring the dual purpose GPIO/LED pins to LED outputs in the LED General Purpose IO Configuration register, the LED_SEL bit is changed as 0 and resulting the configured value from the EEPROM is cleared. The issue is fixed by using read-modify-write approach. Fixes: f293501c ("smsc95xx: configure LED outputs") Signed-off-by:
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Reviewed-by:
Woojung Huh <woojung.huh@microchip.com> Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.comSigned-off-by:
-
Hariprasad Kelam authored
There are two type of classes. "Leaf classes" that are the bottom of the class hierarchy. "Inner classes" that are neither the root class nor leaf classes. QoS rules can only specify leaf classes as targets for traffic. Root / \ / \ 1 2 /\ / \ 4 5 classes 1,4 and 5 are leaf classes. class 2 is a inner class. When a leaf class made as inner, or vice versa, resources associated with send queue (send queue buffers and transmit schedulers) are not getting freed. Fixes: 5e6808b4 ("octeontx2-pf: Add support for HTB offload") Signed-off-by:Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240523073626.4114-1-hkelam@marvell.comSigned-off-by:
-
Kuniyuki Iwashima authored
syzkaller reported data-race of sk->sk_hash in unix_autobind() [0], and the same ones exist in unix_bind_bsd() and unix_bind_abstract(). The three bind() functions prefetch sk->sk_hash locklessly and use it later after validating that unix_sk(sk)->addr is NULL under unix_sk(sk)->bindlock. The prefetched sk->sk_hash is the hash value of unbound socket set in unix_create1() and does not change until bind() completes. There could be a chance that sk->sk_hash changes after the lockless read. However, in such a case, non-NULL unix_sk(sk)->addr is visible under unix_sk(sk)->bindlock, and bind() returns -EINVAL without using the prefetched value. The KCSAN splat is false-positive, but let's silence it by reading sk->sk_hash under unix_sk(sk)->bindlock. [0]: BUG: KCSAN: data-race in unix_autobind / unix_autobind write to 0xffff888034a9fb88 of 4 bytes by task 4468 on cpu 0: __unix_set_addr_hash net/unix/af_unix.c:331 [inline] unix_autobind+0x47a/0x7d0 net/unix/af_unix.c:1185 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373 __sys_connect_file+0xd7/0xe0 net/socket.c:2048 __sys_connect+0x114/0x140 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x40/0x50 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e read to 0xffff888034a9fb88 of 4 bytes by task 4465 on cpu 1: unix_autobind+0x28/0x7d0 net/unix/af_unix.c:1134 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373 __sys_connect_file+0xd7/0xe0 net/socket.c:2048 __sys_connect+0x114/0x140 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x40/0x50 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e value changed: 0x000000e4 -> 0x000001e3 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 6.8.0-12822-gcd51db110a7e #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: afd20b92 ("af_unix: Replace the big lock with small locks.") Reported-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240522154218.78088-1-kuniyu@amazon.comSigned-off-by:
-
