- 01 Jun, 2023 12 commits
-
-
Jakub Kicinski authored
Xin Long says: ==================== rtnetlink: a couple of fixes in linkmsg validation validate_linkmsg() was introduced to do linkmsg validation for existing links. However, the new created links also need this linkmsg validation. Add validate_linkmsg() check for link creating in Patch 1, and add more tb checks into validate_linkmsg() in Patch 2 and 3. ==================== Link: https://lore.kernel.org/r/cover.1685548598.git.lucien.xin@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
This fixes the issue that dev gro_max_size and gso_ipv4_max_size can be set to a huge value: # ip link add dummy1 type dummy # ip link set dummy1 gro_max_size 4294967295 # ip -d link show dummy1 dummy addrgenmode eui64 ... gro_max_size 4294967295 Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536") Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Reported-by:Xiumei Mu <xmu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Xin Long authored
These IFLA_GSO_* tb check should also be done for the new created link, otherwise, they can be set to a huge value when creating links: # ip link add dummy1 gso_max_size 4294967295 type dummy # ip -d link show dummy1 dummy addrgenmode eui64 ... gso_max_size 4294967295 Fixes: 46e6b992 ("rtnetlink: allow GSO maximums to be set on device creation") Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Signed-off-by: -
Xin Long authored
validate_linkmsg() was introduced by commit 1840bb13 ("[RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK") to validate tb[IFLA_ADDRESS/BROADCAST] for existing links. The same check should also be done for newly created links. This patch adds validate_linkmsg() call in rtnl_create_link(), to avoid the invalid address set when creating some devices like: # ip link add dummy0 type dummy # ip link add link dummy0 name mac0 address 01:02 type macsec Fixes: 0e06877c ("[RTNETLINK]: rtnl_link: allow specifying initial device address") Signed-off-by:
-
Maciej Fijalkowski authored
The ice driver caches next_to_clean value at the beginning of ice_clean_rx_irq() in order to remember the first buffer that has to be freed/recycled after main Rx processing loop. The end boundary is indicated by first descriptor of frame that Rx processing loop has ended its duties. Note that if mentioned loop ended in the middle of gathering multi-buffer frame, next_to_clean would be pointing to the descriptor in the middle of the frame BUT freeing/recycling stage will stop at the first descriptor. This means that next iteration of ice_clean_rx_irq() will miss the (first_desc, next_to_clean - 1) entries. When running various 9K MTU workloads, such splats were observed: [ 540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 540.787787] #PF: supervisor read access in kernel mode [ 540.793002] #PF: error_code(0x0000) - not-present page [ 540.798218] PGD 0 P4D 0 [ 540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G W 6.3.0-rc7+ #96 [ 540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice] [ 540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98 [ 540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282 [ 540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe [ 540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff [ 540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100 [ 540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004 [ 540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040 [ 540.890253] FS: 00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000 [ 540.898465] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0 [ 540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 540.926032] PKRU: 55555554 [ 540.928790] Call Trace: [ 540.931276] <TASK> [ 540.933418] ice_napi_poll+0x4ca/0x6d0 [ice] [ 540.937804] ? __pfx_ice_napi_poll+0x10/0x10 [ice] [ 540.942716] napi_busy_loop+0xd7/0x320 [ 540.946537] xsk_recvmsg+0x143/0x170 [ 540.950178] sock_recvmsg+0x99/0xa0 [ 540.953729] __sys_recvfrom+0xa8/0x120 [ 540.957543] ? do_futex+0xbd/0x1d0 [ 540.961008] ? __x64_sys_futex+0x73/0x1d0 [ 540.965083] __x64_sys_recvfrom+0x20/0x30 [ 540.969155] do_syscall_64+0x38/0x90 [ 540.972796] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 540.977934] RIP: 0033:0x7f6de5f27934 To fix this, set cached_ntc to first_desc so that at the end, when freeing/recycling buffers, descriptors from first to ntc are not missed. Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230531154457.3216621-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Xu Liang authored
The interrupt fix in commit 97a89ed1 should be applied on all variants of GPY2xx PHY and GPY115C. Fixes: 97a89ed1 ("net: phy: mxl-gpy: disable interrupts on GPY215 by default") Signed-off-by:
Xu Liang <lxu@maxlinear.com> Reviewed-by:
-
Yoshihiro Shimoda authored
Fix return value in the error path of rswitch_start_xmit(). If TX queues are full, this function should return NETDEV_TX_BUSY. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20230529073817.1145208-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Andreas Svensson authored
A switch held in reset by default needs to wait longer until we can reliably detect it. An issue was observed when testing on the Marvell 88E6393X (Link Street). The driver failed to detect the switch on some upstarts. Increasing the wait time after reset deactivation solves this issue. The updated wait time is now also the same as the wait time in the mv88e6xxx_hardware_reset function. Fixes: 7b75e49d ("net: dsa: mv88e6xxx: wait after reset deactivation") Signed-off-by:
Andreas Svensson <andreas.svensson@axis.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Bert Karwatzki authored
IPA_STATUS_SIZE was introduced in commit b8dc7d0e as a replacement for the size of the removed struct ipa_status which had size sizeof(__le32[8]). Use this value as IPA_STATUS_SIZE. Fixes: b8dc7d0e ("net: ipa: stop using sizeof(status)") Signed-off-by:
Bert Karwatzki <spasswolf@web.de> Reviewed-by:
-
fuyuanli authored
In this patch, we mainly try to handle sending a compressed ack correctly if it's deferred. Here are more details in the old logic: When sack compression is triggered in the tcp_compressed_ack_kick(), if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED and then defer to the release cb phrase. Later once user releases the sock, tcp_delack_timer_handler() should send a ack as expected, which, however, cannot happen due to lack of ICSK_ACK_TIMER flag. Therefore, the receiver would not sent an ack until the sender's retransmission timeout. It definitely increases unnecessary latency. Fixes: 5d9f4262 ("tcp: add SACK compression") Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
fuyuanli <fuyuanli@didiglobal.com> Signed-off-by:
Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/netdev/20230529113804.GA20300@didi-ThinkCentre-M920t-N000/Reviewed-by:
-
Hangyu Hua authored
If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total size is 252 bytes(key->enc_opts.len = 252) then key->enc_opts.len = opt->length = data_len / 4 = 0 when the third TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This bypasses the next bounds check and results in an out-of-bounds. Fixes: 0a6e7778 ("net/sched: allow flower to match tunnel options") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Reviewed-by:
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.comSigned-off-by:
-
Edward Cree authored
Failure ladders weren't exactly unwinding what the function had done up to that point; most seriously, when we encountered an already offloaded rule, the failure path tried to remove the new rule from the hashtable, which would in fact remove the already-present 'old' rule (since it has the same key) from the table, and leak its resources. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202305200745.xmIlkqjH-lkp@intel.com/ Fixes: d902e1a7 ("sfc: bare bones TC offload on EF100") Fixes: 17654d84 ("sfc: add offloading of 'foreign' TC (decap) rules") Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
- 31 May, 2023 8 commits
-
-
Vladislav Efanov authored
Syzkaller got the following report: BUG: KASAN: use-after-free in sk_setup_caps+0x621/0x690 net/core/sock.c:2018 Read of size 8 at addr ffff888027f82780 by task syz-executor276/3255 The function sk_setup_caps (called by ip6_sk_dst_store_flow-> ip6_dst_store) referenced already freed memory as this memory was freed by parallel task in udpv6_sendmsg->ip6_sk_dst_lookup_flow-> sk_dst_check. task1 (connect) task2 (udp6_sendmsg) sk_setup_caps->sk_dst_set | | sk_dst_check-> | sk_dst_set | dst_release sk_setup_caps references | to already freed dst_entry| The reason for this race condition is: sk_setup_caps() keeps using the dst after transferring the ownership to the dst cache. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Vladislav Efanov <VEfanov@ispras.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pedro Tammela authored
The current code for the length calculation wrongly truncates the reported length of the groups array, causing an under report of the subscribed groups. To fix this, use 'BITS_TO_BYTES()' which rounds up the division by 8. Fixes: b42be38b ("netlink: add API to retrieve all group memberships") Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
-
Zhengchao Shao authored
When use the following command to test: 1)ip link add bond0 type bond 2)ip link set bond0 up 3)tc qdisc add dev bond0 root handle ffff: mq 4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq The kernel reports NULL pointer dereference issue. The stack information is as follows: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mq_attach+0x44/0xa0 lr : qdisc_graft+0x20c/0x5cc sp : ffff80000e2236a0 x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0 x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1 x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000 x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000 x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000 x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000 Call trace: mq_attach+0x44/0xa0 qdisc_graft+0x20c/0x5cc tc_modify_qdisc+0x1c4/0x664 rtnetlink_rcv_msg+0x354/0x440 netlink_rcv_skb+0x64/0x144 rtnetlink_rcv+0x28/0x34 netlink_unicast+0x1e8/0x2a4 netlink_sendmsg+0x308/0x4a0 sock_sendmsg+0x64/0xac ____sys_sendmsg+0x29c/0x358 ___sys_sendmsg+0x90/0xd0 __sys_sendmsg+0x7c/0xd0 __arm64_sys_sendmsg+0x2c/0x38 invoke_syscall+0x54/0x114 el0_svc_common.constprop.1+0x90/0x174 do_el0_svc+0x3c/0xb0 el0_svc+0x24/0xec el0t_64_sync_handler+0x90/0xb4 el0t_64_sync+0x174/0x178 This is because when mq is added for the first time, qdiscs in mq is set to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we need to initialize qdiscs in the mq before continuing to graft. Otherwise, it will couse NULL pointer dereference issue in mq_attach(). And the same issue will occur in the attach functions of mqprio, taprio and htb. ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and the command should be dropped. Fixes: 6ec1c69a ("net_sched: add classful multiqueue dummy scheduler") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Tested-by:
Peilin Ye <peilin.ye@bytedance.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Peilin Ye says: ==================== net/sched: Fixes for sch_ingress and sch_clsact These are v6 fixes for ingress and clsact Qdiscs, including only first 4 patches (already tested and reviewed) from v5. Patch 5 and 6 from previous versions are still under discussion and will be sent separately. [a] https://syzkaller.appspot.com/bug?extid=b53a9c0d1ea4ad62da8b Link to v5: https://lore.kernel.org/r/cover.1684887977.git.peilin.ye@bytedance.com/ Link to v4: https://lore.kernel.org/r/cover.1684825171.git.peilin.ye@bytedance.com/ Link to v3 (incomplete): https://lore.kernel.org/r/cover.1684821877.git.peilin.ye@bytedance.com/ Link to v2: https://lore.kernel.org/r/cover.1684796705.git.peilin.ye@bytedance.com/ Link to v1: https://lore.kernel.org/r/cover.1683326865.git.peilin.ye@bytedance.com/ ==================== Link: https://lore.kernel.org/r/cover.1685388545.git.peilin.ye@bytedance.comSigned-off-by:
-
Peilin Ye authored
Currently, after creating an ingress (or clsact) Qdisc and grafting it under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under e.g. a TBF Qdisc: $ ip link add ifb0 type ifb $ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000 $ tc qdisc add dev ifb0 clsact $ tc qdisc link dev ifb0 handle ffff: parent 1:1 $ tc qdisc show dev ifb0 qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms qdisc clsact ffff: parent ffff:fff1 refcnt 2 ^^^^^^^^ clsact's refcount has increased: it is now grafted under both TC_H_CLSACT and 1:1. ingress and clsact Qdiscs should only be used under TC_H_INGRESS (TC_H_CLSACT). Prohibit regrafting them. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Fixes: 1f211a1b ("net, sched: add clsact qdisc") Tested-by:Vlad Buslov <vladbu@nvidia.com> Signed-off-by:
-
Peilin Ye authored
Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1 (TC_H_INGRESS, TC_H_CLSACT): $ ip link add name ifb0 type ifb $ tc qdisc add dev ifb0 parent ffff:fff1 htb $ tc qdisc add dev ifb0 clsact Error: Exclusivity flag on, cannot modify. $ drgn ... >>> ifb0 = netdev_get_by_name(prog, "ifb0") >>> qdisc = ifb0.ingress_queue.qdisc_sleeping >>> print(qdisc.ops.id.string_().decode()) htb >>> qdisc.flags.value_() # TCQ_F_INGRESS 2 Only allow ingress and clsact Qdiscs under ffff:fff1. Return -EINVAL for everything else. Make TCQ_F_INGRESS a static flag of ingress and clsact Qdiscs. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Fixes: 1f211a1b ("net, sched: add clsact qdisc") Tested-by:
-
Peilin Ye authored
clsact Qdiscs are only supposed to be created under TC_H_CLSACT (which equals TC_H_INGRESS). Return -EOPNOTSUPP if 'parent' is not TC_H_CLSACT. Fixes: 1f211a1b ("net, sched: add clsact qdisc") Tested-by:
-
Peilin Ye authored
ingress Qdiscs are only supposed to be created under TC_H_INGRESS. Return -EOPNOTSUPP if 'parent' is not TC_H_INGRESS, similar to mq_init(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/Tested-by:
-
- 30 May, 2023 19 commits
-
-
Paolo Abeni authored
Matthieu Baerts says: ==================== selftests: mptcp: skip tests not supported by old kernels (part 1) After a few years of increasing test coverage in the MPTCP selftests, we realised [1] the last version of the selftests is supposed to run on old kernels without issues. Supporting older versions is not that easy for this MPTCP case: these selftests are often validating the internals by checking packets that are exchanged, when some MIB counters are incremented after some actions, how connections are getting opened and closed in some cases, etc. In other words, it is not limited to the socket interface between the userspace and the kernelspace. In addition, the current selftests run a lot of different sub-tests but the TAP13 protocol used in the selftests don't support sub-tests: in other words, one failure in sub-tests implies that the whole selftest is seen as failed at the end because sub-tests are not tracked. It is then important to skip sub-tests not supported by old kernels. To minimise the modifications and reduce the complexity to support old versions, the idea is to look at external signs and skip the whole selftests or just some sub-tests before starting them. This first part focuses on marking the different selftests as skipped if MPTCP is not even supported. That's what is done in patches 2 to 8. Patch 2/8 introduces a new file (mptcp_lib.sh) to be able to re-use some helpers in the different selftests. The first MPTCP selftest has been introduced in v5.6. Patch 1/8 is a bit different but still linked: it modifies mptcp_join.sh selftest not to use 'cmp --bytes' which is not supported by the BusyBox implementation. It is apparently quite common to use BusyBox in CI environments. This tool is needed for a subtest introduced in v6.1. Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1] Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 ==================== Link: https://lore.kernel.org/r/20230528-upstream-net-20230528-mptcp-selftests-support-old-kernels-part-1-v1-0-a32d85577fc6@tessares.netSigned-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Acked-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: dc65fe82 ("selftests: mptcp: add packet mark test case") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 1a418cb8 ("mptcp: simult flow self-tests") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: df62f2ec ("selftests/mptcp: add diag interface tests") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf24 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: eedbc685 ("selftests: add PM netlink functional tests") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Note that this check can also mark the test as failed if 'SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES' env var is set to 1: by doing that, we can make sure a test is not being skipped by mistake. A new shared file is added here to be able to re-used the same check in the different selftests we have. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Acked-by:
-
Matthieu Baerts authored
BusyBox's 'cmp' command doesn't support the '--bytes' parameter. Some CIs -- i.e. LKFT -- use BusyBox and have the mptcp_join.sh test failing [1] because their 'cmp' command doesn't support this '--bytes' option: cmp: unrecognized option '--bytes=1024' BusyBox v1.35.0 () multi-call binary. Usage: cmp [-ls] [-n NUM] FILE1 [FILE2] Instead, 'head --bytes' can be used as this option is supported by BusyBox. A temporary file is needed for this operation. Because it is apparently quite common to use BusyBox, it is certainly better to backport this fix to impacted kernels. Fixes: 6bf41020 ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Link: https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v6.3-rc5-5-g148341f0a2f5/testrun/16088933/suite/kselftest-net-mptcp/test/net_mptcp_userspace_pm_sh/log [1] Suggested-by:Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Haiyang Zhang authored
The apc->eth_stats.rx_cqes is one per NIC (vport), and it's on the frequent and parallel code path of all queues. So, r/w into this single shared variable by many threads on different CPUs creates a lot caching and memory overhead, hence perf regression. And, it's not accurate due to the high volume concurrent r/w. For example, a workload is iperf with 128 threads, and with RPS enabled. We saw perf regression of 25% with the previous patch adding the counters. And this patch eliminates the regression. Since the error path of mana_poll_rx_cq() already has warnings, so keeping the counter and convert it to a per-queue variable is not necessary. So, just remove this counter from this high frequency code path. Also, remove the tx_cqes counter for the same reason. We have warnings & other counters for errors on that path, and don't need to count every normal cqe processing. Cc: stable@vger.kernel.org Fixes: bd7fc6e1 ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/1685115537-31675-1-git-send-email-haiyangz@microsoft.comSigned-off-by:
-
Paolo Abeni authored
Wen Gu says: ==================== Two fixes for SMCRv2 This patch set includes two bugfix for SMCRv2. ==================== Link: https://lore.kernel.org/r/1685101741-74826-1-git-send-email-guwen@linux.alibaba.comSigned-off-by:
-
Wen Gu authored
We encountered a crash when using SMCRv2. It is caused by a logical error in smc_llc_fill_ext_v2(). BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 453 Comm: kworker/7:4 Kdump: loaded Tainted: G W E 6.4.0-rc3+ #44 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_fill_ext_v2+0x117/0x280 [smc] RSP: 0018:ffffacb5c064bd88 EFLAGS: 00010282 RAX: ffff9a6bc1c3c02c RBX: ffff9a6be3558000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 000000000000000a RBP: ffffacb5c064bdb8 R08: 0000000000000040 R09: 000000000000000c R10: ffff9a6bc0910300 R11: 0000000000000002 R12: 0000000000000000 R13: 0000000000000002 R14: ffff9a6bc1c3c02c R15: ffff9a6be3558250 FS: 0000000000000000(0000) GS:ffff9a6eefdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000010b078003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_send_add_link+0x1ae/0x2f0 [smc] smc_llc_srv_add_link+0x2c9/0x5a0 [smc] ? cc_mkenc+0x40/0x60 smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into SMCRv2 LLC ADD LINK messages. However, smc_llc_fill_ext_v2() mistakenly accesses to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes the logic. Fixes: b4ba4652 ("net/smc: extend LLC layer for SMC-Rv2") Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
-
Wen Gu authored
When finding the first RMB of link group, it should start from the current RMB list whose index is 0. So fix it. Fixes: b4ba4652 ("net/smc: extend LLC layer for SMC-Rv2") Signed-off-by:
-
David Howells authored
UTS_RELEASE has a maximum length of 64 which can cause rxrpc_version to exceed the 65 byte message limit. Per the rx spec[1]: "If a server receives a packet with a type value of 13, and the client-initiated flag set, it should respond with a 65-byte payload containing a string that identifies the version of AFS software it is running." The current implementation causes a compile error when WERROR is turned on and/or UTS_RELEASE exceeds the length of 49 (making the version string more than 64 characters). Fix this by generating the string during module initialisation and limiting the UTS_RELEASE segment of the string does not exceed 49 chars. We need to make sure that the 64 bytes includes "linux-" at the front and " AF_RXRPC" at the back as this may be used in pattern matching. Fixes: 44ba0698 ("RxRPC: Handle VERSION Rx protocol packets") Reported-by:
Kenny Ho <Kenny.Ho@amd.com> Link: https://lore.kernel.org/r/20230523223944.691076-1-Kenny.Ho@amd.com/Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Jeffrey Altman <jaltman@auristor.com> Link: https://lore.kernel.org/r/654974.1685100894@warthog.procyon.org.ukSigned-off-by:
-
Cambda Zhu authored
This patch replaces the tp->mss_cache check in getting TCP_MAXSEG with tp->rx_opt.user_mss check for CLOSE/LISTEN sock. Since tp->mss_cache is initialized with TCP_MSS_DEFAULT, checking if it's zero is probably a bug. With this change, getting TCP_MAXSEG before connecting will return default MSS normally, and return user_mss if user_mss is set. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Jack Yang <mingliang@linux.alibaba.com> Suggested-by:
Cambda Zhu <cambda@linux.alibaba.com> Link: https://lore.kernel.org/netdev/14D45862-36EA-4076-974C-EA67513C92F6@linux.alibaba.com/Reviewed-by:
-
Eric Dumazet authored
Historically connect(AF_UNSPEC) has been abused by syzkaller and other fuzzers to trigger various bugs. A recent one triggers a divide-by-zero [1], and Paolo Abeni was able to diagnose the issue. tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN and TCP REPAIR mode being not used. Then later if socket lock is released in sk_wait_data(), another thread can call connect(AF_UNSPEC), then make this socket a TCP listener. When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf() and attempt a divide by 0 in tcp_rcv_space_adjust() [1] This patch adds a new socket field, counting number of threads blocked in sk_wait_event() and inet_wait_for_connect(). If this counter is not zero, tcp_disconnect() returns an error. This patch adds code in blocking socket system calls, thus should not hurt performance of non blocking ones. Note that we probably could revert commit 499350a5 ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore original tcpi_rcv_mss meaning (was 0 if no payload was ever received on a socket) [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740 Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48 RSP: 0018:ffffc900033af660 EFLAGS: 00010206 RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001 RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8 R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344 FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616 tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681 inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 ____sys_recvmsg+0x210/0x5a0 net/socket.c:2720 ___sys_recvmsg+0xf2/0x180 net/socket.c:2762 do_recvmmsg+0x25e/0x6e0 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5c0108c0f9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003 RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000 </TASK> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
syzbot <syzkaller@googlegroups.com> Reported-by:
-
Eric Dumazet authored
A recent patch added READ_ONCE() in packet_bind() and packet_bind_spkt() This is better handled by reading pkt_sk(sk)->num later in packet_do_bind() while appropriate lock is held. READ_ONCE() in writers are often an evidence of something being wrong. Fixes: 822b5a1c ("af_packet: Fix data-races of pkt_sk(sk)->num.") Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230526154342.2533026-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
ethtool has some attrs which dump multiple scalars into an attribute. The spec currently expects one attr per entry. Fixes: a353318e ("tools: ynl: populate most of the ethtool spec") Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20230526220653.65538-1-kuba@kernel.orgSigned-off-by:
-
Sebastian Krzyszkowiak authored
BM818 is based on Qualcomm MDM9607 chipset. Fixes: 9a07406b ("net: usb: qmi_wwan: Add the BroadMobi BM818 card") Cc: stable@vger.kernel.org Signed-off-by:
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230526-bm818-dtr-v1-1-64bbfa6ba8af@puri.smSigned-off-by:
-
- 26 May, 2023 1 commit
-
-
Osama Muhammad authored
This patch fixes the error checking in nfcsim.c. The DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. Signed-off-by:
Osama Muhammad <osmtendev@gmail.com> Reviewed-by:
-
