Don't set predefined degamma curve to cursor plane if the cursor
attribute flag is not set. Applying a degamma curve to the cursor by
default breaks userspace expectation. Checking the flag before
performing any color transformation prevents too dark cursor gamma in
DCN3+ on many Linux desktop environment (KDE Plasma, GNOME,
wlroots-based, etc.) as reported at:
- https://gitlab.freedesktop.org/drm/amd/-/issues/1513

This is the same approach followed by DCN2 drivers where the issue is
not present.

Fixes: 03f54d7d ("drm/amd/display: Add DCN3 DPP")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Adjust timeout handling code for easier runtime manipulation
during debug. Change has no functional effect by default.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Init TA ucode for SRIOV.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For SRIOV VF, FB location is programmed by host driver, no need to
program it in guest driver.

v2: squash in unused variable removal
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add various functions for replay, such as construct, destroy, enable
get_state, and copy_setting etc. These functions communicate with the
firmware to setup and enable panel replay
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Now the SDMA firmware can support SDMA MGCG properly,
so let's enable it from the driver side.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For non-GFX IP blocks, set up ras obj if ras feature
is allowed. For GFX IP blocks, force issue ras
enable_feature command to firmware and only set up ras
obj if ras feature is allowed
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_ras_late_init will invoke ras_late_init call
per IP block
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following:

ERROR: code indent should use tabs where possible
WARNING: Missing a blank line after declarations
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: suspect code indent for conditional statements (8, 24)
+       if (!(data & (DAGB0_CNTL_MISC2__DISABLE_WRREQ_CG_MASK |
[...]
+                       *flags |= AMD_CG_SUPPORT_MC_MGCG;

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As amdgpu.h is getting decomposed, move vram and gtt extern defines into
amdgpu_ttm.h & flash extern to amdgpu_psp.h

Fixes: f9acfafc ("drm/amdgpu: Move externs to amdgpu.h file from amdgpu_drv.c")
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Usage of container_of is wrong here.
struct acpi_device *adev = container_of(handle, struct acpi_device, handle)

This reverts commit cbd0606e.

References: https://gitlab.freedesktop.org/drm/amd/-/issues/2744
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For GFX IP that only supports poison consumption, GFX
RAS won't be marked as enabled. i.e., hardware doesn't
support gfx sram ecc. But driver still needs to issue
firmware to enable poison consumption mode for GFX IP.
In such case, check poison mode and treat GFX IP as
RAS capable IP block.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some IP blocks only support partial ras feature and don't
have ras counter and/or ras error status register at all.
Driver should not create err_count sysfs node for those
IP blocks.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In some instances, the GPU is transmitting repeated frame to the sink
without any updates or changes in the content. These repeat transmission
are wasteful, resulting in power draw in different aspects of the system

1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic
prevents power down of parts of this HW path.

2. GPU is transmitting pixel data to the display through the main link of
the DisplayPort interface. This prevents power down of both the Source
transmitter (TX) and the Sink receiver (RX)

The concepts of utilizing replay is similar to PSR, but there is a benefit of:
	Source and Sink remaining synchronized which allows for
        	- lower latency when switching from replay to live frames
	        - enable the possibility of more use cases
		- easy control of the sink's refresh rate during replay

Due to Source and Sink remaining timing synchronized, Replay can be activated
in more UI scenarios.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Sort the include files that are included in amdgpu_drv.c alphabetically.
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the below:

ERROR: switch and case should be at the same indent
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Block comments use * on subsequent lines
WARNING: Comparisons should place the constant on the right side of the test

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following to align to linux coding style:

WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments should align the * on each line

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following to align to linux coding style:

WARNING: Missing a blank line after declarations
WARNING: sizeof *rd should be sizeof(*rd)

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

if GFX clock is in DS (Deep Sleep) state, the current gfx freq may less then dpm
level 0, then pp_dpm_sclk node unable show correct freq.

(align output format with other cards)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The existing OD interface cannot support the growing demand for more
OD features. We are in the transition to a new OD mechanism. So,
disable the SMU13 OD feature support temporarily. And this should be
reverted when the new OD mechanism online.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DMA address reference within svm_ranges should be unmapped only after
the memory has been released from the system. In case of range
splitting, the DMA address information should be copied to the
corresponding range after this has split. But leaving dma mapping
intact.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

correct the pcie width value in pp_dpm_pcie for smu 13.0.0
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some systems are only connected by HDMI or DP, so warning related to
missing eDP is unnecessary.  Downgrade to debug instead.

Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: 6d9b6dce ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()")
Reported-by: Mastan.Katragadda@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
Symclk should be based on link_enc_inst, and symclk_fe_sel should be based
on stream_enc_inst.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
Using dig_stream_mapper, program symclk_en and symclk_fe_src_sel when
enabling or disabling the corresponding stream.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add to IP discovery table.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add initial support for IH 6.1.

v2: Fix copyright date (Alex)
Signed-off-by: Ben Li <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add new registers.

v2: updates (Alex)
Signed-off-by: Ben Li <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add to IP discovery table.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add to IP discovery table.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the
least significant bits for any command submission. Hence match against
the exact register value, otherwise a register value of all 0xFFs also
could falsely indicate that boot loader is ready. Also, from PSP v13.0.6
and newer, bits[7:0] will be used to indicate command error status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For SMU v13.0.4/11, driver does not need to stop RLC for S0i3,
the firmwares will handle that properly.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add to IP discovery table.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Users report a white flickering screen on multiple systems that
is tied to having 64GB or more memory.  When S/G is enabled pages
will get pinned to both VRAM carve out and system RAM leading to
this.

Until it can be fixed properly, disable S/G when 64GB of memory or
more is detected.  This will force pages to be pinned into VRAM.
This should fix white screen flickers but if VRAM pressure is
encountered may lead to black screens.  It's a trade-off for now.

Fixes: 81d0bcf9 ("drm/amdgpu: make display pinning more flexible (v2)")
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e1 ("drm/amdgpu: add S/G display parameter")
Cc: <stable@vger.kernel.org> # 6.4.y
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add firmware declaration.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-gt-next-2023-08-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

- Avoid infinite GPU waits by avoidin premature release of request's
  reusable memory (Chris, Janusz)
- Expose RPS thresholds in sysfs (Tvrtko)
- Apply GuC SLPC min frequency softlimit correctly (Vinay)
- Restore SLPC efficient freq earlier (Vinay)
- Consider OA buffer boundary when zeroing out reports (Umesh)
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL (Matt R)
- Fix context workarounds with non-masked regs on MTL/DG2 (Lucas)
- Enable the CCS_FLUSH bit in the pipe control and in the CS for MTL+ (Andi)
- Update MTL workarounds 14018778641, 22016122933 (Tejas, Zhanjun)
- Ensure memory quiesced before AUX CCS invalidation (Jonathan)

- Add a gsc_info debugfs (Daniele)
- Invalidate the TLBs on each GT on multi-GT device (Chris)
- Fix a VMA UAF for multi-gt platform (Nirmoy)
- Do not use stolen on MTL due to HW bug (Nirmoy)
- Check HuC and GuC version compatibility on MTL (Daniele)
- Dump perf_limit_reasons for slow GuC init debug (Vinay)
- Replace kmap() with kmap_local_page() (Sumitra, Ira)
- Add sentinel to xehp_oa_b_counters for KASAN (Andrzej)
- Add the gen12_needs_ccs_aux_inv helper (Andi)
- Fixes and updates for GSC memory allocation (Daniele)
- Fix one wrong caching mode enum usage (Tvrtko)
- Fixes for GSC wakeref (Alan)

- Static checker fixes (Harshit, Arnd, Dan, Cristophe, David, Andi)
- Rename flags with bit_group_X according to the datasheet (Andi)
- Use direct alias for i915 in requests (Andrzej)
- Replace i915->gt0 with to_gt(i915) (Andi)
- Use the i915_vma_flush_writes helper (Tvrtko)
- Selftest improvements (Alan)
- Remove dead code (Tvrtko)
Signed-off-by: Dave Airlie <airlied@redhat.com>

# Conflicts:
#	drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMy6kDd9npweR4uy@jlahtine-mobl.ger.corp.intel.com

- Removing unused declarations (Arnd, Gustavo)
- ICL+ DSI modeset sequence fixes (Ville)
- Improvements on HDCP (Suraj)
- Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya)
- Restore HSW/BDW PSR1 (Ville)
- Other PSR Fixes (Jouni)
- Fixes around DC states and other Display Power (Imre)
- Init DDI ports in VBT order (Ville)
- General documentation fixes (Jani)
- General refactor for better organization (Jani)
- Bigjoiner fix (Stanislav)
- VDSC Fixes and improvements (Stanialav, Suraj)
- Hotplug fixes and improvements (Simon, Suraj)
- Start using plane scale factor for relative data rate (Stanislav)
- Use shmem for dpt objects (RK)
- Simplify expression &to_i915(dev)->drm (Uwe)
- Do not access i915_gem_object members from frontbuffer tracking (Jouni)
- Fix uncore race around i915->params.mmio_debug (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMv4RCzGyCmG/BDe@intel.com

drm-misc-next for v6.6:

UAPI Changes:

 * virtio:
   * Support sync objects

Cross-subsystem Changes:

 * dt-bindings:
   * Move several panel bindings to the correct files

 * fbcon:
   * Cleanups

 * fbdev:
   * Use _IOMEM_, _SYSMEM_, _DMAMEM_ infixes for initializer macros
     and Kconfig tokens, update drivers accordingly
   * ps3fb: Build fix

 * hid/i2c:
   * Allow panels and touchscreens to power sequence together

 * host1x:
   * Fixes

 * video:
   * Fix Kconfig dependencies for boot-up logo

Core Changes:

 * Documentation updates and fixes

 * Fixes

 * MIPI-DBI:
   * Allow using same the D/C GPIO for multiple displays plus
     driver updates

 * Tests:
   * Convert to kunit actions
   * Fix NULL-deref in drm_exec tests

Driver Changes:

 * armada:
   * Fixes

 * ast:
   * Represent BMV as virtual connector
   * Report DP connection status

 * bridge:
   * dw-hdmi: Support CEC suspend/resume
   * Support debugfs for chains
   * Fixes

 * i915:
   * Fixes

 * imx:
   * Convert to dev_error_probe()
   * Cleanups

 * ipu-v3:
   * Convert to devm_platform_ioremap_resource() in several places

 * nouveau:
   * Workaround DPCD issues

 * panel:
   * Convert to of_device_get_match_data()
   * Fix Kconfig dependencies
   * simple: Set bpc value to fix warning; Set connector type for AUO T215HVN01;
     Support Innolux G156HCE-L01 plus DT bindings
   * ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
   * startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
   * sitronix-st7789v: Support Inanbo T28CP45TN89 plus DT bindings;
     Support EDT ET028013DMA plus DT bindings; Various cleanups
   * edp: Add timings for N140HCA-EAC
   * Allow panels and touchscreens to power sequence together
   * Documentation fixes

 * qaic:
   * Cleanups

 * repaper:
   * Fixes

 * ssd130x
   * Fix shadow-plane allocation
   * Cleanups

 * tegra:
   * Convert to devm_platform_ioremap_resource() in several places
   * Support bridge/connector
   * Enable PM
   * Fixes

 * udl:
   * Cleanups

 * v3d:
   * Fixes

 * vc4:
   * Convert tests to kunit actions

 * virtio:
   * Support sync objects

 * vkms:
   * Support gamma LUT
   * Fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmTLwPUACgkQaA3BHVML
# eiNRBwf8CTjJJpSppitI6YEDyjG5JjpJPOrw4gmyjPCLMRhIa+ddtz8c6eiAJQTX
# Q4RWz4LWF0j/aRdXzxbhCJxLmgMoSbcZYN+jDSoaNbX4Fyi1KXw9eum/HZeMODBO
# ScZQFC5iyiCeKHRXZU4+WefqIFTEkEJJll92g3JYlvy793S2TQsA9LB1RIkbwK6x
# 0R+TtKSxAq9Gtwn4H0z4ACIzBTuIACxwNQRd6FTIeT4yrd7t+JY3WiBz9M96S6dK
# npHyjvJ3Brb88rEzv2eZZUey3fxp7sO7U7DruQVOKkgi4FsltPWxs6Ze9iylXQZr
# KcKfW7sxlF2JZlJwT4u0Ur6DMl60eQ==
# =K1nU
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 04 Aug 2023 01:00:05 AEST
# gpg:                using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803150149.GA16884@linux-uq9g

Merge tag 'drm-next-xilinx-20230802' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next

Miscellaneous fixes for the Xilinx zynqmp-dpsub driver
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801224454.GB335@pendragon.ideasonboard.com

amd-drm-next-6.6-2023-07-28:

amdgpu:
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SubVP fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- Add PSP 14.0 support
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes

amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes

radeon:
- Lots of checkpatch cleanups

Merge conflicts:
- drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
	The switch to drm eu helpers in 8a206685 ("drm/amdgpu: use
	drm_exec for GEM and CSA handling v2") clashed with the
	cosmetic cleanups from 30953c4d ("drm/amdgpu: Fix style
	issues in amdgpu_gem.c"). I
	kept the former since the cleanup up code is gone.
- drivers/gpu/drm/amd/amdgpu/atom.c.
	adf64e21 ("drm/amd: Avoid reading the VBIOS part number
	twice") removed code that 992b8fe1 ("drm/radeon: Replace
	all non-returning strlcpy with strscpy") polished.

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230728214228.8102-1-alexander.deucher@amd.com
[sima: some merge conflict wrangling as noted]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>