-- by advice with Thomas Gleixner
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

apply clockevents_calc_mult_shift() to get rid of
shift assignment and mult calculation for osmr0
  -- by advice with Thomas Gleixner
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

Add MAINTAINER list for unicore32 architecture and pkunity soc drivers.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

This patch implements arch-specific ps2 driver.

By reviewed with Dmitry Torokhov:
     1. move i8042-ucio.h to drivers/input/serio/i8042-unicore32io.h
     2. move puv3_ps2_init() to arch/unicore32/kernel/puv3-core.c
     3. remove unused comments.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Dmitry Torokhov <dtor@mail.ru>

This patch implements arch-specific pci bus driver.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

This patch adds all hardware registers definitions.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

This patch adds machine related core files, also including build infrastructure.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch implements booting process, including uncompression process.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch implements the rest low-level libraries.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

This patch implements low-level uaccess libraries.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

This patch implements low-level debug libraries with On-Chip-Debugger hardware support.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

This patch adds ptrace support.

Changed from previous version:
    1. disable arch_has_single_step and remove single-step instruction handler
    2. add 'Ross Biro 1/23/92' contributor information
    3. clean unused codes
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

This patch implements support for float point unit, which using UniCore-F64 FPU hardware
in UniCore32 ISA.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

This patch adds pm related files, including hibernate and sleep supports.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

This patch implements signals.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

This patch implements interrupts and gpio handling.
UniCore32 has 9 gpio interrupt sources.
And gpio device operations are also here.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

This patch implements timer and time.
RTC and PWM device drivers are also here.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>

This patch implements consistent device DMA handling of memory management.
DMA device operations are also here.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch implements fault handling of memory management.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch includes generic codes for memory management.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch implements process/thread related codes. Backtrace and stacktrace are here.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch implements low level entry and setup codes.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch includes processor and system headers. System call interface is here.
We used the syscall interface the same as asm-generic version.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch includes some generic stuff including elf and ksyms.
Because all one-line asm-generic headers are auto-generated by ASM_GENERIC_HEADERS
in arch/unicore32/Makefile, so the rest seems very little.
ELF handling functions and module handling functions are also here.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch implements build infrastructure.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch changes the implementation of strnlen_user in include/asm-generic/uaccess.h.
Originally, it calls strlen() function directly, which may not correctly handle the access of
user space in most mmu-enabled architectures.
New __strnlen_user is added for using as an architecture specific function.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

This patch adds ftrace.h into asm-generic headers.
The file content could be empty in most architectures.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

This patch adds sizes.h into asm-generic headers.
Only 32-bit version supported.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

The definitions for the PC-style PIO functions in asm-generic/io.h were
meant as dummies so you could compile code on architectures without
ISA and PCI buses. However, unicore32 actually wants to use them
with a real PCI bus, so they need to be defined to actually address
the register window holding the I/O ports.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300:
  MN10300: atomic_read() should ensure it emits a load
  MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist
  MN10300: Proper use of macros get_user() in the case of incremented pointers

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits)
  MIPS: Alchemy: Fix reset for MTX-1 and XXS1500
  MIPS: MTX-1: Make au1000_eth probe all PHY addresses
  MIPS: Jz4740: Add HAVE_CLK
  MIPS: Move idle task creation to work queue
  MIPS, Perf-events: Use unsigned delta for right shift in event update
  MIPS, Perf-events: Work with the new callchain interface
  MIPS, Perf-events: Fix event check in validate_event()
  MIPS, Perf-events: Work with the new PMU interface
  MIPS, Perf-events: Work with irq_work
  MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y
  MIPS: Loongson: Fix potentially wrong string handling
  MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c
  MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h
  MIPS: Remove unused code from arch/mips/kernel/syscall.c
  MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c
  MIPS: MSP: Fix MSP71xx bpci interrupt handler return value
  MIPS: Select R4K timer lib for all MSP platforms
  MIPS: Loongson: Remove ad-hoc cmdline default
  MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).
  MIPS: Add an unreachable return statement to satisfy buggy GCCs.
  ...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: ce4100: Set pci ops via callback instead of module init
  x86/mm: Fix pgd_lock deadlock
  x86/mm: Handle mm_fault_error() in kernel space
  x86: Don't check for BIOS corruption in first 64K when there's no need to

This reverts the parent commit.  I hate doing that, but it's generating
some discussion ("half of it is right"), and since I am planning on
doing the 2.6.38 release later today we can punt it to stable if
required. Let's not rock the boat right now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom_kill_process() starts with victim_points == 0.  This means that
(most likely) any child has more points and can be killed erroneously.

Also, "children has a different mm" doesn't match the reality, we should
check child->mm != t->mm.  This check is not exactly correct if t->mm ==
NULL but this doesn't really matter, oom_kill_task() will kill them
anyway.

Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong
too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 32fd6901 (MIPS: Alchemy: get rid of common/reset.c)
Alchemy-based boards use their own reset function. For MTX-1 and XXS1500,
the reset function pokes at the BCSR.SYSTEM_RESET register, but this does
not work. According to Bruno Randolf, this was not tested when written.

Previously, the generic au1000_restart() routine called the board specific
reset function, which for MTX-1 and XXS1500 did not work, but finally made
a jump to the reset vector, which really triggers a system restart. Fix
reboot for both targets by jumping to the reset vector.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2093/Acked-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When au1000_eth probes the MII bus for PHY address, if we do not set
au1000_eth platform data's phy_search_highest_address, the MII probing
logic will exit early and will assume a valid PHY is found at address 0.
For MTX-1, the PHY is at address 31, and without this patch, the link
detection/speed/duplex would not work correctly.

CC: stable@kernel.org
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2111/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Jz4740 supports the clock framework but doesn't have HAVE_CLK defined,
so define it!
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2112/Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

To avoid forking usermode thread when creating an idle task, move fork_idle
to a work queue.

If kernel starts with maxcpus= option which does not bring all available
cpus online at boot time, idle tasks for offline cpus are not created. If
later offline cpus are hotplugged through sysfs, __cpu_up is called in
the context of the user task, and fork_idle copies its non-zero mm
pointer.  This causes BUG() in per_cpu_trap_init.

This also avoids issues with resource limits of the CPU writing to sysfs,
containers, maybe others.
Signed-off-by: Maksim Rayskiy <mrayskiy@broadcom.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2070/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>