Previously we use "unsigned long *" for those two bitmaps.

But since we only support fixed stripe length (64KiB, already checked in
tree-checker), "unsigned long *" is really a waste of memory, while we
can just use "unsigned long".

This saves us 8 bytes in total for scrub_parity.

To be extra safe, add an ASSERT() making sure calclulated @nsectors is
always smaller than BITS_PER_LONG.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Previsouly we use "unsigned long *" for those two bitmaps.

But since we only support fixed stripe length (64KiB, already checked in
tree-checker), "unsigned long *" is really a waste of memory, while we
can just use "unsigned long".

This saves us 8 bytes in total for btrfs_raid_bio.

To be extra safe, add an ASSERT() making sure calculated
@stripe_nsectors is always smaller than BITS_PER_LONG.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This eliminates 2 labels and makes the code generally more streamlined.
Also rename the 'out_bargs' label to 'out_unlock' since bargs is going
to be freed under the 'out' label. This also fixes a memory leak since
bargs wasn't correctly freed in one of the condition which are now moved
in btrfs_try_lock_balance.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This function contains the factored out locking sequence of
btrfs_ioctl_balance. Having this piece of code separate helps to
simplify btrfs_ioctl_balance which has too complicated.  This will be
used in the next patch to streamline the logic in btrfs_ioctl_balance.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Use the new btrfs_bio_for_each_sector iterator to simplify
btrfs_check_read_dio_bio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Add a helper that works similar to __bio_for_each_segment, but instead of
iterating over PAGE_SIZE chunks it iterates over each sector.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[hch: split from a larger patch, and iterate over the offset instead of
      the offset bits]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add parameter comments ]
Signed-off-by: David Sterba <dsterba@suse.com>

Add a helper to find the csum for a byte offset into the csum buffer.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

Untangle the goto and move the code it jumps to so it goes in the order
of the most likely states first.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>

Add a helper to end I/O on a single sector, which will come in handy
with the new read repair code.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The function submit_data_read_repair() is only called for buffered data
read path, thus those members can be calculated using bvec directly:

- start
  start = page_offset(bvec->bv_page) + bvec->bv_offset;

- end
  end = start + bvec->bv_len - 1;

- page
  page = bvec->bv_page;

- pgoff
  pgoff = bvec->bv_offset;

Thus we can safely replace those 4 parameters with just one bio_vec.

Also remove the unused return value.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[hch: also remove the return value]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

Although we have several data csum verification code, we never have a
function really just to verify checksum for one sector.

Function check_data_csum() do extra work for error reporting, thus it
requires a lot of extra things like file offset, bio_offset etc.

Function btrfs_verify_data_csum() is even worse, it will utilize page
checked flag, which means it can not be utilized for direct IO pages.

Here we introduce a new helper, btrfs_check_sector_csum(), which really
only accept a sector in page, and expected checksum pointer.

We use this function to implement check_data_csum(), and export it for
incoming patch.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[hch: keep passing the csum array as an arguments, as the callers want
      to print it, rename per request]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The following functions do special handling for RAID56 chunks:

- btrfs_is_parity_mirror()
  Check if the range is in RAID56 chunks.

- btrfs_full_stripe_len()
  Either return sectorsize for non-RAID56 profiles or full stripe length
  for RAID56 chunks.

But if a filesystem without any RAID56 chunks, it will not have RAID56
incompat flags, and we can skip the chunk tree looking up completely.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The <linux/mm.h> already provides the PAGE_ALIGNED macro. Let's
use it instead of IS_ALIGNED and passing PAGE_SIZE directly.
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Fanjun Kong <bh1scw@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Fix the comment to represent the actual logic used for sb_write_pointer

- Empty[0] && In use[1] should be an invalid state instead of returning
  zone 0 wp
- Empty[0] && Full[1] should be returning zone 0 wp instead of zone 1 wp
- In use[0] && Empty[1] should be returning zone 0 wp instead of being an
  invalid state
- In use[0] && Full[1] should be returning zone 0 wp instead of returning
  zone 1 wp
- Full[0] && Empty[1] should be returning zone 1 wp instead of returning
  zone 0 wp
- Full[0] && In use[1] should be returning zone 1 wp instead of returning
  zone 0 wp
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Codespell has found a few typos.
Signed-off-by: David Sterba <dsterba@suse.com>

This code requires x509_load_certificate_list() to be built-in.

Fixes: 60050ffe ("certs: Move load_certificate_list() to be with the asymmetric keys code")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/202206221515.DqpUuvbQ-lkp@intel.com/
Link: https://lore.kernel.org/all/20220712104554.408dbf42@gandalf.local.home/Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fix from Borislav Petkov:

 - Reorganize the perf LBR init code so that a TSX quirk is applied
   early enough in order for the LBR MSR access to not #GP

* tag 'perf_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/lbr: Fix unchecked MSR access error on HSW

Pull scheduler fix from Borislav Petkov:
 "A single fix to correct a wrong BUG_ON() condition for deboosted
  tasks"

* tag 'sched_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix BUG_ON condition for deboosted tasks

Pull x86 fixes from Borislav Petkov:
 "A couple more retbleed fallout fixes.

  It looks like their urgency is decreasing so it seems like we've
  managed to catch whatever snafus the limited -rc testing has exposed.
  Maybe we're getting ready... :)

   - Make retbleed mitigations 64-bit only (32-bit will need a bit more
     work if even needed, at all).

   - Prevent return thunks patching of the LKDTM modules as it is not
     needed there

   - Avoid writing the SPEC_CTRL MSR on every kernel entry on eIBRS
     parts

   - Enhance error output of apply_returns() when it fails to patch a
     return thunk

   - A sparse fix to the sev-guest module

   - Protect EFI fw calls by issuing an IBPB on AMD"

* tag 'x86_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Make all RETbleed mitigations 64-bit only
  lkdtm: Disable return thunks in rodata.c
  x86/bugs: Warn when "ibrs" mitigation is selected on Enhanced IBRS parts
  x86/alternative: Report missing return thunk details
  virt: sev-guest: Pass the appropriate argument type to iounmap()
  x86/amd: Use IBPB for firmware calls

Pull clk fix from Stephen Boyd:
 "One more fix to set the correct IO mapping for a clk gate in the
  lan966x driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: lan966x: Fix the lan966x clock gate register address

Pull kvm fixes from Paolo Bonzini:

 - Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR

 - Fix use of sched_setaffinity in selftests

 - Sync kernel headers to tools

 - Fix KVM_STATS_UNIT_MAX

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Protect the unused bits in MSR exiting flags
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  KVM: selftests: Fix target thread to be migrated in rseq_test
  KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats

The mitigations for RETBleed are currently ineffective on x86_32 since
entry_32.S does not use the required macros.  However, for an x86_32
target, the kconfig symbols for them are still enabled by default and
/sys/devices/system/cpu/vulnerabilities/retbleed will wrongly report
that mitigations are in place.

Make all of these symbols depend on X86_64, and only enable RETHUNK by
default on X86_64.

Fixes: f43b9876 ("x86/retbleed: Add fine grained Kconfig knobs")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YtwSR3NNsWp1ohfV@decadent.org.uk

Pull spi fixes from Mark Brown:
 "A few more small driver specific fixes"

* tag 'spi-fix-v5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-rspi: Fix PIO fallback on RZ platforms
  spi: spi-cadence: Fix SPI NO Slave Select macro definition
  spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers

Pull RISC-V fixes from Palmer Dabbelt:

 - Two kexec-related build fixes

 - A DTS update to make the GPIO nodes match the upcoming dtschema

 - A fix that passes -mno-relax directly to the assembler when building
   modules, to work around compilers that fail to do so

* tag 'riscv-for-linus-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: add as-options for modules with assembly compontents
  riscv: dts: align gpio-key node names with dtschema
  RISC-V: kexec: Fix build error without CONFIG_KEXEC
  RISCV: kexec: Fix build error without CONFIG_MODULES

Pull ACPI fix from Rafael Wysocki:
 "Fix yet another piece of ACPI CPPC changes fallout on AMD platforms
  (Mario Limonciello)"

* tag 'acpi-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: CPPC: Don't require flexible address space if X86_FEATURE_CPPC is supported

Pull io_uring fixes from Jens Axboe:
 "Fix for a bad kfree() introduced in this cycle, and a quick fix for
  disabling buffer recycling for IORING_OP_READV.

  The latter will get reworked for 5.20, but it gets the job done for
  5.19"

* tag 'io_uring-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
  io_uring: do not recycle buffer in READV
  io_uring: fix free of unallocated buffer list

Pull block fix from Jens Axboe:
 "Just a single fix for missing error propagation for an allocation
  failure in raid5"

* tag 'block-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
  md/raid5: missing error code in setup_conf()

Pull i2c fixes from Wolfram Sang:
 "Two driver bugfixes and a typo fix"

* tag 'i2c-for-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cadence: Change large transfer count reset logic to be unconditional
  i2c: imx: fix typo in comment
  i2c: mlxcpld: Fix register setting for 400KHz frequency

Pull gpio fixes from Bartosz Golaszewski:

 - fix several regmap usage issues in gpio-pca953x

 - fix out-of-tree build for GPIO selftests

 - fix integer overflow in gpio-xilinx

* tag 'gpio-fixes-for-v5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: gpio-xilinx: Fix integer overflow
  selftests: gpio: fix include path to kernel headers for out of tree builds
  gpio: pca953x: use the correct register address when regcache sync during init
  gpio: pca953x: use the correct range when do regmap sync
  gpio: pca953x: only use single read/write for No AI mode

Pull pin control fixes from Linus Walleij:
 "Only driver fixes:

   - NULL check for the ralink and sunplus drivers

   - Add Jacky Bai as maintainer for the Freescale pin controllers

   - Fix pin config ops for the Ocelot LAN966x and SparX5

   - Disallow AMD pin control to be a module: the GPIO lines need to be
     active in early boot, so no can do

   - Fix the Armada 37xx to use raw spinlocks in the interrupt handler
     path to avoid wait context"

* tag 'pinctrl-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: armada-37xx: use raw spinlocks for regmap to avoid invalid wait context
  pinctrl: armada-37xx: make irq_lock a raw spinlock to avoid invalid wait context
  pinctrl: Don't allow PINCTRL_AMD to be a module
  pinctrl: ocelot: Fix pincfg
  pinctrl: ocelot: Fix pincfg for lan966x
  MAINTAINERS: Update freescale pin controllers maintainer
  pinctrl: sunplus: Add check for kcalloc
  pinctrl: ralink: Check for null return of devm_kcalloc

Pull sound fixes from Takashi Iwai:
 "Only undoes the Rockchip BCLK changes to address a regression"

* tag 'sound-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: rockchip-i2s: Undo BCLK pinctrl changes
  ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found

Pull MMC fix from Ulf Hansson:

 - sdhci-omap: Fix a lockdep warning while probing

* tag 'mmc-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-omap: Fix a lockdep warning for PM runtime init

Pull drm fixes from Dave Airlie:
 "Fixes for this week.

  The main one is the i915 firmware fix for the phoronix reported issue.
  I've written some firmware guidelines as a result, should land in
  -next soon. Otherwise a few amdgpu fixes, a scheduler fix, ttm fix and
  two other minor ones.

  scheduler:
   - scheduling while atomic fix

  ttm:
   - locking fix

  edp:
   - variable typo fix

  i915:
   - add back support for v69 firmware on ADL-P

  amdgpu:
   - Drop redundant buffer cleanup that can lead to a segfault
   - Add a bo_list mutex to avoid possible list corruption in CS
   - dmub notification fix

  imx:
   - fix error path"

* tag 'drm-fixes-2022-07-22' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2
  drm/imx/dcss: Add missing of_node_put() in fail path
  drm/i915/guc: support v69 in parallel to v70
  drm/i915/guc: Support programming the EU priority in the GuC descriptor
  drm/panel-edp: Fix variable typo when saving hpd absent delay from DT
  drm/amdgpu: Remove one duplicated ef removal
  drm/ttm: fix locking in vmap/vunmap TTM GEM helpers
  drm/scheduler: Don't kill jobs in interrupt context
  drm/amd/display: Fix new dmub notification enabling in DM

Merge tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "This contains a pair of commits that fix 282d8998 ("srcu: Prevent
  expedited GPs and blocking readers from consuming CPU"), which was
  itself a fix to an SRCU expedited grace-period problem that could
  prevent kernel live patching (KLP) from completing.

  That SRCU fix for KLP introduced large (as in minutes) boot-time
  delays to embedded Linux kernels running on qemu/KVM. These delays
  were due to the emulation of certain MMIO operations controlling
  memory layout, which were emulated with one expedited grace period per
  access. Common configurations required thousands of boot-time MMIO
  accesses, and thus thousands of boot-time expedited SRCU grace
  periods.

  In these configurations, the occasional sleeps that allowed KLP to
  proceed caused excessive boot delays. These commits preserve enough
  sleeps to permit KLP to proceed, but few enough that the virtual
  embedded kernels still boot reasonably quickly.

  This represents a regression introduced in the v5.19 merge window, and
  the bug is causing significant inconvenience"

* tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  srcu: Make expedited RCU grace periods block even less frequently
  srcu: Block less aggressively for expedited grace periods

Sudip reports that alpha doesn't build properly, with errors like

  include/asm-generic/tlb.h:401:1: error: redefinition of 'tlb_update_vma_flags'
    401 | tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma)
        | ^~~~~~~~~~~~~~~~~~~~
  include/asm-generic/tlb.h:372:1: note: previous definition of 'tlb_update_vma_flags' with type 'void(struct mmu_gather *, struct vm_area_struct *)'
    372 | tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma) { }

the cause being that We have this odd situation where some architectures
were never converted to the newer TLB flushing interfaces that have a
range for the flush.  Instead people left them alone, and we have them
select the MMU_GATHER_NO_RANGE config option to make the tlb header
files account for this.

Peter Zijlstra cleaned some of these nasty header file games up in
commits

  1e9fdf21 ("mmu_gather: Remove per arch tlb_{start,end}_vma()")
  18ba064e ("mmu_gather: Let there be one tlb_{start,end}_vma() implementation")

but tlb_update_vma_flags() was left alone, and then commit b67fbebd
("mmu_gather: Force tlb-flush VM_PFNMAP vmas") ended up removing only
_one_ of the two stale duplicate dummy inline functions.

This removes the other stale one.

Somebody braver than me should try to remove MMU_GATHER_NO_RANGE
entirely, but it requires fixing up the oddball architectures that use
it: alpha, m68k, microblaze, nios2 and openrisc.

The fixups should be fairly straightforward ("fix the build errors it
exposes by adding the appropriate range arguments"), but the reason this
wasn't done in the first place is that so few people end up working on
those architectures.  But it could be done one architecture at a time,
hint, hint.
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Fixes: b67fbebd ("mmu_gather: Force tlb-flush VM_PFNMAP vmas")
Link: https://lore.kernel.org/all/YtpXh0QHWwaEWVAY@debian/
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Current implementation is not able to configure more than 32 pins
due to incorrect data type. So type casting with unsigned long
to avoid it.

Fixes: 02b3f84d ("xilinx: Switch to use bitmap APIs")
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

A scheduling-while-atomic fix for drm/scheduler, a locking fix for TTM,
a typo fix for panel-edp and a resource removal fix for imx/dcss
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721085550.hrwbukj34y56rzva@houat

When trying to load modules built for RISC-V which include assembly files
the kernel loader errors with "unexpected relocation type 'R_RISCV_ALIGN'"
due to R_RISCV_ALIGN relocations being generated by the assembler.

The R_RISCV_ALIGN relocations can be removed at the expense of code space
by adding -mno-relax to gcc and as.  In commit 7a8e7da4
("RISC-V: Fixes to module loading") -mno-relax is added to the build
variable KBUILD_CFLAGS_MODULE. See [1] for more info.

The issue is that when kbuild builds a .S file, it invokes gcc with
the -mno-relax flag, but this is not being passed through to the
assembler. Adding -Wa,-mno-relax to KBUILD_AFLAGS_MODULE ensures that
the assembler is invoked correctly. This may have now been fixed in
gcc[2] and this addition should not stop newer gcc and as from working.

[1] https://github.com/riscv/riscv-elf-psabi-doc/issues/183
[2] https://github.com/gcc-mirror/gcc/commit/3b0a7d624e64eeb81e4d5e8c62c46d86ef521857Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Link: https://lore.kernel.org/r/20220529152200.609809-1-ben.dooks@codethink.co.uk
Fixes: ab1ef68e ("RISC-V: Add sections of PLT and GOT for kernel module")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull MTD fix from Richard Weinberger:
 "A aingle NAND controller fix:

   - gpmi: Fix busy timeout setting (wrong calculation, yes again)"

* tag 'mtd/fixes-for-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times