- 10 Dec, 2020 11 commits
-
-
Paolo Abeni authored
The test program udpgso_bench_rx always invokes the poll() syscall with a timeout of 10ms. If a larger timeout is specified via the command line, udpgso_bench_rx is supposed to do multiple poll() calls till the timeout is expired or an event is received. Currently the poll() loop errors out after the first invocation with no events, and may causes self-tests failure alike: failed GRO with custom segment size ./udpgso_bench_rx: poll: 0x0 expected 0x1 This change addresses the issue allowing the poll() loop to consume all the configured timeout. Fixes: ada641ff ("selftests: fixes for UDP GRO") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mickey Rachamim authored
Add maintainers info for new Marvell Prestera Ethernet switch driver. Signed-off-by:
Mickey Rachamim <mickeyr@marvell.com> Signed-off-by:
-
Guillaume Nault authored
TCA_FLOWER_KEY_MPLS_OPT_LSE_LABEL is a u32 attribute (MPLS label is 20 bits long). Fixes the following bug: $ tc filter add dev ethX ingress protocol mpls_uc \ flower mpls lse depth 2 label 256 \ action drop $ tc filter show dev ethX ingress filter protocol mpls_uc pref 49152 flower chain 0 filter protocol mpls_uc pref 49152 flower chain 0 handle 0x1 eth_type 8847 mpls lse depth 2 label 0 <-- invalid label 0, should be 256 ... Fixes: 61aec25a ("cls_flower: Support filtering on multiple MPLS Label Stack Entries") Signed-off-by:Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Switch to RCU in x_tables to fix possible NULL pointer dereference, from Subash Abhinov Kasiviswanathan. 2) Fix netlink dump of dynset timeouts later than 23 days. 3) Add comment for the indirect serialization of the nft commit mutex with rtnl_mutex. 4) Remove bogus check for confirmed conntrack when matching on the conntrack ID, from Brett Mastbergen. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-09 This series contains updates to igb, ixgbe, i40e, and ice drivers. Sven Auhagen fixes issues with igb XDP: return correct error value in XDP xmit back, increase header padding to include space for double VLAN, add an extack error when Rx buffer is too small for frame size, set metasize if it is set in xdp, change xdp_do_flush_map to xdp_do_flush, and update trans_start to avoid possible Tx timeout. Björn fixes an issue where an Rx buffer can be reused prematurely with XDP redirect for ixgbe, i40e, and ice drivers. The following are changes since commit 323a391a: can: isotp: isotp_setsockopt(): block setsockopt on bound sockets and are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue 1GbE ==================== Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4_en fixes This patchset by Moshe contains fixes to the mlx4 Eth driver, addressing issues in restart flow. Patch 1 protects the restart task from being rescheduled while active. Please queue for -stable >= v2.6. Patch 2 reconstructs SQs stuck in error state, and adds prints for improved debuggability. Please queue for -stable >= v3.12. ==================== Signed-off-by: -
Moshe Shemesh authored
In case error CQE was found while polling TX CQ, the QP is in error state and all posted WQEs will generate error CQEs without any data transmitted. Fix it by reopening the channels, via same method used for TX timeout handling. In addition add some more info on error CQE and WQE for debug. Fixes: bd2f631d ("net/mlx4_en: Notify user when TX ring in error state") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
Add restarting state flag to avoid scheduling another restart task while such task is already running. Change task name from watchdog_task to restart_task to better fit the task role. Fixes: 1e338db5 ("mlx4_en: Fix a race at restart task") Signed-off-by:
-
Neal Cardwell authored
When cwnd is not a multiple of the TSO skb size of N*MSS, we can get into persistent scenarios where we have the following sequence: (1) ACK for full-sized skb of N*MSS arrives -> tcp_write_xmit() transmit full-sized skb with N*MSS -> move pacing release time forward -> exit tcp_write_xmit() because pacing time is in the future (2) TSQ callback or TCP internal pacing timer fires -> try to transmit next skb, but TSO deferral finds remainder of available cwnd is not big enough to trigger an immediate send now, so we defer sending until the next ACK. (3) repeat... So we can get into a case where we never mark ourselves as cwnd-limited for many seconds at a time, even with bulk/infinite-backlog senders, because: o In case (1) above, every time in tcp_write_xmit() we have enough cwnd to send a full-sized skb, we are not fully using the cwnd (because cwnd is not a multiple of the TSO skb size). So every time we send data, we are not cwnd limited, and so in the cwnd-limited tracking code in tcp_cwnd_validate() we mark ourselves as not cwnd-limited. o In case (2) above, every time in tcp_write_xmit() that we try to transmit the "remainder" of the cwnd but defer, we set the local variable is_cwnd_limited to true, but we do not send any packets, so sent_pkts is zero, so we don't call the cwnd-limited logic to update tp->is_cwnd_limited. Fixes: ca8a2263 ("tcp: make cwnd-limited checks measurement-based, and gentler") Reported-by:Ingemar Johansson <ingemar.s.johansson@ericsson.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201209035759.1225145-1-ncardwell.kernel@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Chris Mi authored
The offending commit introduces a cleanup callback that is invoked when the driver module is removed to clean up the tunnel device flow block. But it returns on the first iteration of the for loop. The remaining indirect flow blocks will never be freed. Fixes: 1fac52da ("net: flow_offload: consolidate indirect flow_block infrastructure") CC: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Chris Mi <cmi@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com>
-
Wei Wang authored
For DCTCP, we have to retain the ECT bits set by the congestion control algorithm on the socket when reflecting syn TOS in syn-ack, in order to make ECN work properly. Fixes: ac8f1710 ("tcp: reflect tos value received in SYN to the socket") Reported-by:
Alexander Duyck <alexanderduyck@fb.com> Signed-off-by:
Wei Wang <weiwan@google.com> Reviewed-by:
-
- 09 Dec, 2020 16 commits
-
-
Michal Kubecek authored
Syzbot reported a stack overflow in bitmap_from_arr32() called from ethnl_parse_bitset() when bitset from netlink message is longer than target bitmap length. While ethnl_compact_sanity_checks() makes sure that trailing part is all zeros (i.e. the request does not try to touch bits kernel does not recognize), we also need to cap change_bits to nbits so that we don't try to write past the prepared bitmaps. Fixes: 88db6d1e ("ethtool: add ethnl_parse_bitset() helper") Reported-by: syzbot+9d39fa49d4df294aab93@syzkaller.appspotmail.com Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/3487ee3a98e14cd526f55b6caaa959d2dcbcad9f.1607465316.git.mkubecek@suse.czSigned-off-by:
-
Vitaly Lifshits authored
Changed a configuration in the flows to align with architecture requirements to achieve S0i3.2 substate. This helps both i219V and i219LM configurations. Also fixed a typo in the previous commit 632fbd5e ("e1000e: fix S0ix flows for cable connected case"). Fixes: 632fbd5e ("e1000e: fix S0ix flows for cable connected case"). Signed-off-by:
Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
Mario Limonciello <mario.limonciello@dell.com> Link: https://lore.kernel.org/r/20201208185632.151052-1-mario.limonciello@dell.comSigned-off-by:
-
Björn Töpel authored
The page recycle code, incorrectly, relied on that a page fragment could not be freed inside xdp_do_redirect(). This assumption leads to that page fragments that are used by the stack/XDP redirect can be reused and overwritten. To avoid this, store the page count prior invoking xdp_do_redirect(). Fixes: efc2214b ("ice: Add support for XDP") Reported-and-analyzed-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Tested-by:
George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by:
-
Björn Töpel authored
The page recycle code, incorrectly, relied on that a page fragment could not be freed inside xdp_do_redirect(). This assumption leads to that page fragments that are used by the stack/XDP redirect can be reused and overwritten. To avoid this, store the page count prior invoking xdp_do_redirect(). Fixes: 64530739 ("ixgbe: add initial support for xdp redirect") Reported-and-analyzed-by:
Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by:
-
Björn Töpel authored
The page recycle code, incorrectly, relied on that a page fragment could not be freed inside xdp_do_redirect(). This assumption leads to that page fragments that are used by the stack/XDP redirect can be reused and overwritten. To avoid this, store the page count prior invoking xdp_do_redirect(). Longer explanation: Intel NICs have a recycle mechanism. The main idea is that a page is split into two parts. One part is owned by the driver, one part might be owned by someone else, such as the stack. t0: Page is allocated, and put on the Rx ring +--------------- used by NIC ->| upper buffer (rx_buffer) +--------------- | lower buffer +--------------- page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX t1: Buffer is received, and passed to the stack (e.g.) +--------------- | upper buff (skb) +--------------- used by NIC ->| lower buffer (rx_buffer) +--------------- page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX - 1 t2: Buffer is received, and redirected +--------------- | upper buff (skb) +--------------- used by NIC ->| lower buffer (rx_buffer) +--------------- Now, prior calling xdp_do_redirect(): page count == USHRT_MAX rx_buffer->pagecnt_bias == USHRT_MAX - 2 This means that buffer *cannot* be flipped/reused, because the skb is still using it. The problem arises when xdp_do_redirect() actually frees the segment. Then we get: page count == USHRT_MAX - 1 rx_buffer->pagecnt_bias == USHRT_MAX - 2 From a recycle perspective, the buffer can be flipped and reused, which means that the skb data area is passed to the Rx HW ring! To work around this, the page count is stored prior calling xdp_do_redirect(). Note that this is not optimal, since the NIC could actually reuse the "lower buffer" again. However, then we need to track whether XDP_REDIRECT consumed the buffer or not. Fixes: d9314c47 ("i40e: add support for XDP_REDIRECT") Reported-and-analyzed-by: -
Sven Auhagen authored
Since we share the transmit queue with the network stack, it is possible that we run into a transmit queue timeout. This will reset the queue. This happens under high load when XDP is using the transmit queue pretty much exclusively. netdev_start_xmit() sets the trans_start variable of the transmit queue to jiffies which is later utilized by dev_watchdog(), so to avoid timeout, let stack know that XDP xmit happened by bumping the trans_start within XDP Tx routines to jiffies. Fixes: 9cbc948b ("igb: add XDP support") Acked-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Sven Auhagen <sven.auhagen@voleatech.de> Tested-by:
-
Sven Auhagen authored
Since it is a new XDP implementation change xdp_do_flush_map to xdp_do_flush. Fixes: 9cbc948b ("igb: add XDP support") Suggested-by:
-
Sven Auhagen authored
add metasize if it is set in xdp Fixes: 9cbc948b ("igb: add XDP support") Suggested-by:
-
Sven Auhagen authored
Add an extack error message when the RX buffer size is too small for the frame size. Fixes: 9cbc948b ("igb: add XDP support") Suggested-by:
-
Sven Auhagen authored
Increase the packet header padding to include double VLAN tagging. This patch uses a macro for this. Fixes: 9cbc948b ("igb: add XDP support") Suggested-by:
-
Sven Auhagen authored
The igb XDP xmit back function should only return defined error codes. Fixes: 9cbc948b ("igb: add XDP support") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Jakub Kicinski authored
This reverts commit 4179b00c ("geneve: pull IP header before ECN decapsulation"). Eric says: "network header should have been pulled already before hitting geneve_rx()". Let's revert the syzbot fix since it's causing more harm than good, and revisit. Suggested-by:
Jianlin Shi <jishi@redhat.com> Fixes: 4179b00c ("geneve: pull IP header before ECN decapsulation") Link: https://bugzilla.kernel.org/show_bug.cgi?id=210569 Link: https://lore.kernel.org/netdev/CANn89iJVWfb=2i7oU1=D55rOyQnBbbikf+Mc6XHMkY7YX-yGEw@mail.gmail.com/Signed-off-by:
-
Oliver Hartkopp authored
The isotp socket can be widely configured in its behaviour regarding addressing types, fill-ups, receive pattern tests and link layer length. Usually all these settings need to be fixed before bind() and can not be changed afterwards. This patch adds a check to enforce the common usage pattern. Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Thomas Wagner <thwa1@web.de> Link: https://lore.kernel.org/r/20201203140604.25488-2-socketcan@hartkopp.netSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201204133508.742120-3-mkl@pengutronix.deSigned-off-by:
-
Brett Mastbergen authored
Since commit 656c8e9c ("netfilter: conntrack: Use consistent ct id hash calculation") the ct id will not change from initialization to confirmation. Removing the confirmation check allows for things like adding an element to a 'typeof ct id' set in prerouting upon reception of the first packet of a new connection, and then being able to reference that set consistently both before and after the connection is confirmed. Fixes: 656c8e9c ("netfilter: conntrack: Use consistent ct id hash calculation") Signed-off-by:
Brett Mastbergen <brett.mastbergen@gmail.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Eric Dumazet authored
Before commit a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") small tcp_rmem[1] values were overridden by tcp_fixup_rcvbuf() to accommodate various MSS. This is no longer the case, and Hazem Mohamed Abuelfotoh reported that DRS would not work for MTU 9000 endpoints receiving regular (1500 bytes) frames. Root cause is that tcp_init_buffer_space() uses tp->rcv_wnd for upper limit of rcvq_space.space computation, while it can select later a smaller value for tp->rcv_ssthresh and tp->window_clamp. ss -temoi on receiver would show : skmem:(r0,rb131072,t0,tb46080,f0,w0,o0,bl0,d0) rcv_space:62496 rcv_ssthresh:56596 This means that TCP can not increase its window in tcp_grow_window(), and that DRS can never kick. Fix this by making sure that rcvq_space.space is not bigger than number of bytes that can be held in TCP receive queue. People unable/unwilling to change their kernel can work around this issue by selecting a bigger tcp_rmem[1] value as in : echo "4096 196608 6291456" >/proc/sys/net/ipv4/tcp_rmem Based on an initial report and patch from Hazem Mohamed Abuelfotoh https://lore.kernel.org/netdev/20201204180622.14285-1-abuehaze@amazon.com/ Fixes: a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Fixes: 041a14d2 ("tcp: start receiver buffer autotuning sooner") Reported-by:
Hazem Mohamed Abuelfotoh <abuehaze@amazon.com> Signed-off-by:
-
Zhang Changzhong authored
platform_get_resource() may fail and in this case a NULL dereference will occur. Fix it to use devm_platform_ioremap_resource() instead of calling platform_get_resource() and devm_ioremap(). This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 8425c41d ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by:
Esben Haabendal <esben@geanix.com> Signed-off-by:
-
- 08 Dec, 2020 13 commits
-
-
Cengiz Can authored
`tipc_node_apply_property` does a null check on a `tipc_link_entry` pointer but also accesses the same pointer out of the null check block. This triggers a warning on Coverity Static Analyzer because we're implying that `e->link` can BE null. Move "Update MTU for node link entry" line into if block to make sure that we're not in a state that `e->link` is null. Signed-off-by:
Cengiz Can <cengiz@kernel.wtf> Signed-off-by:
-
David S. Miller authored
Joakim Zhang says: ==================== patches for stmmac A patch set for stmmac, fix some driver issues. ChangeLogs: V1->V2: * add Fixes tag. * add patch 5/5 into this patch set. V2->V3: * rebase to latest net tree where fixes go. ==================== Signed-off-by: -
Fugang Duan authored
The current IP register MAC_HW_Feature1[ADDR64] only defines 32/40/64 bit width, but some SOCs support others like i.MX8MP support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64]. So overwrite dma_cap.addr64 according to HW real design. Fixes: 94abdad6 ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip") Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Fugang Duan authored
There have chance to re-enable the eee_ctrl_timer and fire the timer in napi callback after delete the timer in .stmmac_release(), which introduces to access eee registers in the timer function after clocks are disabled then causes system hang. Found this issue when do suspend/resume and reboot stress test. It is safe to delete the timer after napi disabled and disable lpi mode. Fixes: d765955d ("stmmac: add the Energy Efficient Ethernet support") Signed-off-by:
-
Fugang Duan authored
When do suspend/resume test, there have WARN_ON() log dump from stmmac_xmit() funciton, the code logic: entry = tx_q->cur_tx; first_entry = entry; WARN_ON(tx_q->tx_skbuff[first_entry]); In normal case, tx_q->tx_skbuff[txq->cur_tx] should be NULL because the skb should be handled and freed in stmmac_tx_clean(). But stmmac_resume() reset queue parameters like below, skb buffers may not be freed. tx_q->cur_tx = 0; tx_q->dirty_tx = 0; So free tx skb buffer in stmmac_resume() to avoid warning and memory leak. log: [ 46.139824] ------------[ cut here ]------------ [ 46.144453] WARNING: CPU: 0 PID: 0 at drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3235 stmmac_xmit+0x7a0/0x9d0 [ 46.154969] Modules linked in: crct10dif_ce vvcam(O) flexcan can_dev [ 46.161328] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.4.24-2.1.0+g2ad925d15481 #1 [ 46.170369] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 46.175677] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 46.180465] pc : stmmac_xmit+0x7a0/0x9d0 [ 46.184387] lr : dev_hard_start_xmit+0x94/0x158 [ 46.188913] sp : ffff800010003cc0 [ 46.192224] x29: ffff800010003cc0 x28: ffff000177e2a100 [ 46.197533] x27: ffff000176ef0840 x26: ffff000176ef0090 [ 46.202842] x25: 0000000000000000 x24: 0000000000000000 [ 46.208151] x23: 0000000000000003 x22: ffff8000119ddd30 [ 46.213460] x21: ffff00017636f000 x20: ffff000176ef0cc0 [ 46.218769] x19: 0000000000000003 x18: 0000000000000000 [ 46.224078] x17: 0000000000000000 x16: 0000000000000000 [ 46.229386] x15: 0000000000000079 x14: 0000000000000000 [ 46.234695] x13: 0000000000000003 x12: 0000000000000003 [ 46.240003] x11: 0000000000000010 x10: 0000000000000010 [ 46.245312] x9 : ffff00017002b140 x8 : 0000000000000000 [ 46.250621] x7 : ffff00017636f000 x6 : 0000000000000010 [ 46.255930] x5 : 0000000000000001 x4 : ffff000176ef0000 [ 46.261238] x3 : 0000000000000003 x2 : 00000000ffffffff [ 46.266547] x1 : ffff000177e2a000 x0 : 0000000000000000 [ 46.271856] Call trace: [ 46.274302] stmmac_xmit+0x7a0/0x9d0 [ 46.277874] dev_hard_start_xmit+0x94/0x158 [ 46.282056] sch_direct_xmit+0x11c/0x338 [ 46.285976] __qdisc_run+0x118/0x5f0 [ 46.289549] net_tx_action+0x110/0x198 [ 46.293297] __do_softirq+0x120/0x23c [ 46.296958] irq_exit+0xb8/0xd8 [ 46.300098] __handle_domain_irq+0x64/0xb8 [ 46.304191] gic_handle_irq+0x5c/0x148 [ 46.307936] el1_irq+0xb8/0x180 [ 46.311076] cpuidle_enter_state+0x84/0x360 [ 46.315256] cpuidle_enter+0x34/0x48 [ 46.318829] call_cpuidle+0x18/0x38 [ 46.322314] do_idle+0x1e0/0x280 [ 46.325539] cpu_startup_entry+0x24/0x40 [ 46.329460] rest_init+0xd4/0xe0 [ 46.332687] arch_call_rest_init+0xc/0x14 [ 46.336695] start_kernel+0x420/0x44c [ 46.340353] ---[ end trace bc1ee695123cbacd ]--- Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by:
-
Fugang Duan authored
Start phylink instance and resume back the PHY to supply RX clock to MAC before MAC layer initialization by calling .stmmac_hw_setup(), since DMA reset depends on the RX clock, otherwise DMA reset cost maximum timeout value then finally timeout. Fixes: 74371272 ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by:
-
Fugang Duan authored
Current timeout value is not enough for gmac5 dma reset on imx8mp platform, increase the timeout range. Signed-off-by:
-
Pablo Neira Ayuso authored
Add an explicit comment in the code to describe the indirect serialization of the holders of the commit_mutex with the rtnl_mutex. Commit 90d2723c ("netfilter: nf_tables: do not hold reference on netdevice from preparation phase") already describes this, but a comment in this case is better for reference. Reported-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
-
Pablo Neira Ayuso authored
Use nf_msecs_to_jiffies64 and nf_jiffies64_to_msecs as provided by 8e1102d5 ("netfilter: nf_tables: support timeouts larger than 23 days"), otherwise ruleset listing breaks. Fixes: a8b1e36d ("netfilter: nft_dynset: fix element timeout for HZ != 1000") Signed-off-by:
-
Jarod Wilson authored
Don't try to adjust XFRM support flags if the bond device isn't yet registered. Bad things can currently happen when netdev_change_features() is called without having wanted_features fully filled in yet. This code runs both on post-module-load mode changes, as well as at module init time, and when run at module init time, it is before register_netdevice() has been called and filled in wanted_features. The empty wanted_features led to features also getting emptied out, which was definitely not the intended behavior, so prevent that from happening. Originally, I'd hoped to stop adjusting wanted_features at all in the bonding driver, as it's documented as being something only the network core should touch, but we actually do need to do this to properly update both the features and wanted_features fields when changing the bond type, or we get to a situation where ethtool sees: esp-hw-offload: off [requested on] I do think we should be using netdev_update_features instead of netdev_change_features here though, so we only send notifiers when the features actually changed. Fixes: a3b658cf ("bonding: allow xfrm offload setup post-module-load") Reported-by:Ivan Vecera <ivecera@redhat.com> Suggested-by:
Jarod Wilson <jarod@redhat.com> Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.comSigned-off-by:
-
Subash Abhinov Kasiviswanathan authored
When running concurrent iptables rules replacement with data, the per CPU sequence count is checked after the assignment of the new information. The sequence count is used to synchronize with the packet path without the use of any explicit locking. If there are any packets in the packet path using the table information, the sequence count is incremented to an odd value and is incremented to an even after the packet process completion. The new table value assignment is followed by a write memory barrier so every CPU should see the latest value. If the packet path has started with the old table information, the sequence counter will be odd and the iptables replacement will wait till the sequence count is even prior to freeing the old table info. However, this assumes that the new table information assignment and the memory barrier is actually executed prior to the counter check in the replacement thread. If CPU decides to execute the assignment later as there is no user of the table information prior to the sequence check, the packet path in another CPU may use the old table information. The replacement thread would then free the table information under it leading to a use after free in the packet processing context- Unable to handle kernel NULL pointer dereference at virtual address 000000000000008e pc : ip6t_do_table+0x5d0/0x89c lr : ip6t_do_table+0x5b8/0x89c ip6t_do_table+0x5d0/0x89c ip6table_filter_hook+0x24/0x30 nf_hook_slow+0x84/0x120 ip6_input+0x74/0xe0 ip6_rcv_finish+0x7c/0x128 ipv6_rcv+0xac/0xe4 __netif_receive_skb+0x84/0x17c process_backlog+0x15c/0x1b8 napi_poll+0x88/0x284 net_rx_action+0xbc/0x23c __do_softirq+0x20c/0x48c This could be fixed by forcing instruction order after the new table information assignment or by switching to RCU for the synchronization. Fixes: 80055dab ("netfilter: x_tables: make xt_replace_table wait until old rules are not used anymore") Reported-by:
Sean Tranchetti <stranche@codeaurora.org> Reported-by:
kernel test robot <lkp@intel.com> Suggested-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecJakub Kicinski authored
Steffen Klassert says: ==================== pull request (net): ipsec 2020-12-07 1) Sysbot reported fixes for the new 64/32 bit compat layer. From Dmitry Safonov. 2) Fix a memory leak in xfrm_user_policy that was introduced by adding the 64/32 bit compat layer. From Yu Kuai. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: net: xfrm: fix memory leak in xfrm_user_policy() xfrm/compat: Don't allocate memory with __GFP_ZERO xfrm/compat: memset(0) 64-bit padding at right place xfrm/compat: Translate by copying XFRMA_UNSPEC attribute ==================== Link: https://lore.kernel.org/r/20201207093937.2874932-1-steffen.klassert@secunet.comSigned-off-by:
-
Martin Blumenstingl authored
The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in struct clk_mux expects the mask relative to the "shift" field in the same struct. While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use __ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK macro. Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201205213207.519341-1-martin.blumenstingl@googlemail.comSigned-off-by:
-
