TTM doesn't yet fully support mapping of DMA memory when SEV is active,
so in that case, refuse DMA operation. For guest-backed object operation
this means 3D acceleration will be disabled. For host-backed, VRAM will be
used for data transfer between the guest and the device.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

When we refuse DMA from system pages for whatever reason, we don't
handle that correctly when guest-backed objects was enabled.
Since guest-backed objects by definition require DMA to and from
system pages, disable all functionality that relies on them.
That basically amounts to 3D acceleration and screen targets.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull ARM SoC fixes from Olof Johansson:
 "We've been accruing these for a couple of weeks, so the batch is a bit
  bigger than usual.

  Largest delta is due to a led-bl driver that is added -- there was a
  miscommunication before the merge window and the driver didn't make it
  in. Due to this, the platforms needing it regressed. At this point, it
  seemed easier to add the new driver than unwind the changes.

  Besides that, there are a handful of various fixes:

   - AMD tee memory leak fix

   - A handful of fixlets for i.MX SCU communication

   - A few maintainers woke up and realized DEBUG_FS had been missing
     for a while, so a few updates of that.

  ... and the usual collection of smaller fixes to various platforms"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits)
  ARM: socfpga_defconfig: Add back DEBUG_FS
  arm64: dts: socfpga: agilex: Fix gmac compatible
  ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
  arm64: dts: meson: fix gxm-khadas-vim2 wifi
  arm64: dts: meson-sm1-sei610: add missing interrupt-names
  ARM: meson: Drop unneeded select of COMMON_CLK
  ARM: dts: bcm2711: Add pcie0 alias
  ARM: dts: bcm283x: Add missing properties to the PWR LED
  tee: amdtee: fix memory leak in amdtee_open_session()
  ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set
  arm: dts: dra76x: Fix mmc3 max-frequency
  ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
  bus: ti-sysc: Fix 1-wire reset quirk
  ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
  soc: imx-scu: Align imx sc msg structs to 4
  firmware: imx: Align imx_sc_msg_req_cpu_start to 4
  firmware: imx: scu-pd: Align imx sc msg structs to 4
  firmware: imx: misc: Align imx sc msg structs to 4
  firmware: imx: scu: Ensure sequential TX
  ARM: dts: imx7-colibri: Fix frequency for sd/mmc
  ...

Pull EDAC fix from Borislav Petkov:
 "Error reporting fix for synopsys_edac: do not overwrite partial
  decoded error message (Sherry Sun)"

* tag 'edac_urgent-2020-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/synopsys: Do not print an error with back-to-back snprintf() calls

Pull char/misc fixes from Greg KH:
 "Here are four small char/misc driver fixes for reported issues for
  5.6-rc5.

  These fixes are:

   - binder fix for a potential use-after-free problem found (took two
     tries to get it right)

   - interconnect core fix

   - altera-stapl driver fix

  All four of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: prevent UAF for binderfs devices II
  interconnect: Handle memory allocation errors
  altera-stapl: altera_get_note: prevent write beyond end of 'key'
  binder: prevent UAF for binderfs devices

Pull driver core and debugfs fixes from Greg KH:
 "Here are four small driver core / debugfs patches for 5.6-rc3:

   - debugfs api cleanup now that all debugfs_create_regset32() callers
     have been fixed up. This was waiting until after the -rc1 merge as
     these fixes came in through different trees

   - driver core sync state fixes based on reports of minor issues found
     in the feature

  All of these have been in linux-next with no reported issues"

* tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Skip unnecessary work when device doesn't have sync_state()
  driver core: Add dev_has_sync_state()
  driver core: Call sync_state() even if supplier has no consumers
  debugfs: remove return value of debugfs_create_regset32()

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial fixes for 5.6-rc5

  Just some small serial driver fixes, and a vt core fixup, full details
  are:

   - vt fixes for issues found by syzbot

   - serdev fix for Apple boxes

   - fsl_lpuart serial driver fixes

   - MAINTAINER update for incorrect serial files

   - new device ids for 8250_exar driver

   - mvebu-uart fix

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: free IDs allocated by IDA
  Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE"
  serdev: Fix detection of UART devices on Apple machines.
  MAINTAINERS: Add missed files related to Synopsys DesignWare UART
  serial: 8250_exar: add support for ACCES cards
  tty:serial:mvebu-uart:fix a wrong return
  vt: selection, push sel_lock up
  vt: selection, push console lock down

Pull USB/PHY fixes from Greg KH:
 "Here are some small USB and PHY driver fixes for reported issues for
  5.6-rc5.

  Included in here are:

   - phy driver fixes

   - new USB quirks

   - USB cdns3 gadget driver fixes

   - USB hub core fixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Update chain bit correctly when using sg list
  usb: core: port: do error out if usb_autopm_get_interface() fails
  usb: core: hub: do error out if usb_autopm_get_interface() fails
  usb: core: hub: fix unhandled return by employing a void function
  usb: storage: Add quirk for Samsung Fit flash
  usb: quirks: add NO_LPM quirk for Logitech Screen Share
  usb: usb251xb: fix regulator probe and error handling
  phy: allwinner: Fix GENMASK misuse
  usb: cdns3: gadget: toggle cycle bit before reset endpoint
  usb: cdns3: gadget: link trb should point to next request
  phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling
  phy: brcm-sata: Correct MDIO operations for 40nm platforms
  phy: ti: gmii-sel: do not fail in case of gmii
  phy: ti: gmii-sel: fix set of copy-paste errors
  phy: core: Fix phy_get() to not return error on link creation failure
  phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval

Pull rdma fixes from Jason Gunthorpe:
 "Nothing particularly exciting, some small ODP regressions from the mmu
  notifier rework, another bunch of syzkaller fixes, and a bug fix for a
  botched syzkaller fix in the first rc pull request.

   - Fix busted syzkaller fix in 'get_new_pps' - this turned out to
     crash on certain HW configurations

   - Bug fixes for various missed things in error unwinds

   - Add a missing rcu_read_lock annotation in hfi/qib

   - Fix two ODP related regressions from the recent mmu notifier
     changes

   - Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm

   - Revert an old patch in CMA as it is now shown to not be allocating
     port numbers properly"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/iwcm: Fix iwcm work deallocation
  RDMA/siw: Fix failure handling during device creation
  RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing
  RDMA/odp: Ensure the mm is still alive before creating an implicit child
  RDMA/core: Fix protection fault in ib_mr_pool_destroy
  IB/mlx5: Fix implicit ODP race
  IB/hfi1, qib: Ensure RCU is locked when accessing list
  RDMA/core: Fix pkey and port assignment in get_new_pps
  RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
  RDMA/rw: Fix error flow during RDMA context initialization
  RDMA/core: Fix use of logical OR in get_new_pps
  Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"

Pull io_uring fixes from Jens Axboe:
 "Here are a few io_uring fixes that should go into this release. This
  contains:

   - Removal of (now) unused io_wq_flush() and associated flag (Pavel)

   - Fix cancelation lockup with linked timeouts (Pavel)

   - Fix for potential use-after-free when freeing percpu ref for fixed
     file sets

   - io-wq cancelation fixups (Pavel)"

* tag 'io_uring-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
  io_uring: fix lockup with timeouts
  io_uring: free fixed_file_data after RCU grace period
  io-wq: remove io_wq_flush and IO_WQ_WORK_INTERNAL
  io-wq: fix IO_WQ_WORK_NO_CANCEL cancellation

Pull block fixes from Jens Axboe:
 "Here are a few fixes that should go into this release. This contains:

   - Revert of a bad bcache patch from this merge window

   - Removed unused function (Daniel)

   - Fixup for the blktrace fix from Jan from this release (Cengiz)

   - Fix of deeper level bfqq overwrite in BFQ (Carlo)"

* tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
  block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
  blktrace: fix dereference after null check
  Revert "bcache: ignore pending signals when creating gc and allocator thread"
  block: Remove used kblockd_schedule_work_on()

Pull media fixes from Mauro Carvalho Chehab:

 - a fix for the media controller links in both hantro driver and in
   v4l2-mem2mem core

 - some fixes for the pulse8-cec driver

 - vicodec: handle alpha channel for RGB32 formats, as it may be used

 - mc-entity.c: fix handling of pad flags

* tag 'media/v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: hantro: Fix broken media controller links
  media: mc-entity.c: use & to check pad flags, not ==
  media: v4l2-mem2mem.c: fix broken links
  media: vicodec: process all 4 components for RGB32 formats
  media: pulse8-cec: close serio in disconnect, not adap_free
  media: pulse8-cec: INIT_DELAYED_WORK was called too late

There is a recipe to deadlock the kernel: submit a timeout sqe with a
linked_timeout (e.g.  test_single_link_timeout_ception() from liburing),
and SIGKILL the process.

Then, io_kill_timeouts() takes @ctx->completion_lock, but the timeout
isn't flagged with REQ_F_COMP_LOCKED, and will try to double grab it
during io_put_free() to cancel the linked timeout. Probably, the same
can happen with another io_kill_timeout() call site, that is
io_commit_cqring().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull s390 fixes from Vasily Gorbik:

 - Fix panic in gup_fast on large pud by providing an implementation of
   pud_write. This has been overlooked during migration to common gup
   code.

 - Fix unexpected write combining on PCI stores.

* tag 's390-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: Fix unexpected write combine on resource
  s390/mm: fix panic in gup_fast on large pud

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.6:

   - One fix for a recent regression to our breakpoint/watchpoint code.

   - Another fix for our KUAP support, this time a missing annotation in
     a rarely used path in signal handling.

   - A fix for our handling of a CPU feature that effects the PMU, when
     booting guests in some configurations.

   - A minor fix to our linker script to explicitly include the .BTF
     section.

  Thanks to: Christophe Leroy, Desnes A. Nunes do Rosario, Leonardo
  Bras, Naveen N. Rao, Ravi Bangoria, Stefan Berger"

* tag 'powerpc-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix missing KUAP disable in flush_coherent_icache()
  powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems
  powerpc: Include .BTF section
  powerpc/watchpoint: Don't call dar_within_range() for Book3S

Pull xen fixes from Juergen Gross:
 "Four fixes and a small cleanup patch:

   - two fixes by Dongli Zhang fixing races in the xenbus driver

   - two fixes by me fixing issues introduced in 5.6

   - a small cleanup by Gustavo Silva replacing a zero-length array with
     a flexible-array"

* tag 'for-linus-5.6b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/blkfront: fix ring info addressing
  xen/xenbus: fix locking
  xenbus: req->err should be updated before req->state
  xenbus: req->body should be updated before req->state
  xen: Replace zero-length array with flexible-array member

Pull thread fixes from Christian Brauner:
 "Here are a few hopefully uncontroversial fixes:

   - Use RCU_INIT_POINTER() when initializing rcu protected members in
     task_struct to fix sparse warnings.

   - Add pidfd_fdinfo_test binary to .gitignore file"

* tag 'for-linus-2020-03-07' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  selftests: pidfd: Add pidfd_fdinfo_test in .gitignore
  exit: Fix Sparse errors and warnings
  fork: Use RCU_INIT_POINTER() instead of rcu_access_pointer()

Pull sound fixes from Takashi Iwai:
 "The regular "bump-in-the-middle" updates, containing mostly ASoC-
  related fixes at this time. All changes are reasonably small.

  A few entries are for ASoC and ALSA core parts (DAPM, PCM, topology)
  for followups of the recent changes and potential buffer overflow by
  snprintf(), while the rest are (both new and old) device-specific
  fixes for Intel, meson, tas2562, rt1015, as well as the usual HD-audio
  quirks"

* tag 'sound-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: sgio2audio: Remove usage of dropped hw_params/hw_free functions
  ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294
  ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master
  ALSA: hda/realtek - Add Headset Button supported for ThinkPad X1
  ALSA: hda/realtek - Add Headset Mic supported
  ASoC: wm8741: Fix typo in Kconfig prompt
  ASoC: stm32: sai: manage rebind issue
  ASoC: SOF: Fix snd_sof_ipc_stream_posn()
  ASoC: rt1015: modify pre-divider for sysclk
  ASoC: rt1015: add operation callback function for rt1015_dai[]
  ASoC: soc-component: tidyup snd_soc_pcm_component_sync_stop()
  ASoC: dapm: Correct DAPM handling of active widgets during shutdown
  ASoC: tas2562: Fix sample rate error message
  ASoC: Intel: Skylake: Fix available clock counter incrementation
  ASoC: soc-pcm/soc-compress: don't use snd_soc_dapm_stream_stop()
  ASoC: meson: g12a: add tohdmitx reset
  ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path
  ASoC: soc-core: fix for_rtd_codec_dai_rollback() macro
  ASoC: topology: Fix memleak in soc_tplg_manifest_load()
  ASoC: topology: Fix memleak in soc_tplg_link_elems_load()
  ...

Merge tag 'asoc-fix-v5.6-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.6

More fixes that have arrived since the merge window, spread out all
over.  There's a few things like the operation callback addition for
rt1015 and the meson reset addition which add small new bits of
functionality to fix non-working systems, they're all very small and for
parts of newly added functionality.

Merge tag 'linux-kselftest-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This consists of a cleanup patch to undo changes to global .gitignore
  that added selftests/lkdtm objects and add them to a local
  selftests/lkdtm/.gitignore.

  Summary of Linus's comments on local vs. global gitignore scope:

   - Keep local gitignore patterns in local files.

   - Put only global gitignore patterns in the top-level gitignore file.

  Local scope keeps things much better separated. It also incidentally
  means that if a directory gets renamed, the gitignore file continues
  to work unless in the case of renaming the actual files themselves
  that are named in the gitignore"

* tag 'linux-kselftest-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftest/lkdtm: Use local .gitignore

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a handful of fixes that I would like to target for 5.6:

   - A pair of fixes to module loading, which we hope solve the last of
     the issues with module text being loaded too sparsely for our call
     relocations.

   - A Kconfig fix that disallows selecting memory models not supported
     by NOMMU.

   - A series of Kconfig updates to ease selecting the drivers necessary
     to run on QEMU's virt platform.

   - DTS updates for SiFive's HiFive Unleashed.

   - A fix to our seccomp support that avoids mangling restartable
     syscalls"

* tag 'riscv-for-linus-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix seccomp reject syscall code path
  riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS file
  RISC-V: Select Goldfish RTC driver for QEMU virt machine
  RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machine
  RISC-V: Enable QEMU virt machine support in defconfigs
  RISC-V: Add kconfig option for QEMU virt machine
  riscv: Fix range looking for kernel image memblock
  riscv: Force flat memory model with no-mmu
  riscv: Change code model of module to medany to improve data accessing
  riscv: avoid the PIC offset of static percpu data in module beyond 2G limits

This makes the script more convenient to run.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull devicetree fixes from Rob Herring:
 "Another batch of DT fixes. I think this should be the last of it, but
  sending pull requests seems to cause people to send more fixes.

  Summary:

   - Fixes for warnings introduced by hierarchical PSCI binding changes

   - Fixes for broken doc references due to DT schema conversions

   - Several grammar and typo fixes

   - Fix a bunch of dtc warnings in examples"

* tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: arm: Fixup the DT bindings for hierarchical PSCI states
  dt-bindings: power: Extend nodename pattern for power-domain providers
  MAINTAINERS: update ALLWINNER CPUFREQ DRIVER entry
  dt-bindings: bus: Drop empty compatible string in example
  dt-bindings: power: Convert domain-idle-states bindings to json-schema
  dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCI
  dt-bindings: arm: Correct links to idle states definitions
  dt-bindings: mfd: Fix typo in file name of twl-familly.txt
  dt-bindings: mfd: tps65910: Improve grammar
  dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad")
  dt-bindings: arm: fsl: fix APF6Dev compatible
  dt-bindings: Fix dtc warnings in examples
  docs: dt: fix several broken doc references
  docs: dt: fix several broken references due to renames
  MAINTAINERS: clean up PCIE DRIVER FOR CAVIUM THUNDERX

Pull vgacon fix from Daniel Vetter:
 "One vgacon input check for stable"

* tag 'drm-fixes-2020-03-06-1' of git://anongit.freedesktop.org/drm/drm:
  vgacon: Fix a UAF in vgacon_invert_region

Pull btrfs fix from David Sterba:
 "One fixup for DIO when in use with the new checksums, a missed case
  where the checksum size was still assuming u32"

* tag 'for-5.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix RAID direct I/O reads with alternate csums

Pull file locking fixes from Jeff Layton:
 "Just a couple of late-breaking patches for the file locking code. The
  second patch (from yangerkun) fixes a rather nasty looking potential
  use-after-free that should go to stable.

  The other patch could technically wait for 5.7, but it's fairly
  innocuous so I figured we might as well take it"

* tag 'filelock-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: fix a potential use-after-free problem when wakeup a waiter
  fcntl: Distribute switch variables for initialization

Pull spi fixes from Mark Brown:
 "A selection of small fixes, mostly for drivers, that have arrived
  since the merge window. None of them are earth shattering in
  themselves but all useful for affected systems"

* tag 'spi-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi_register_controller(): free bus id on error paths
  spi: bcm63xx-hsspi: Really keep pll clk enabled
  spi: atmel-quadspi: fix possible MMIO window size overrun
  spi/zynqmp: remove entry that causes a cs glitch
  spi: pxa2xx: Add CS control clock quirk
  spi: spidev: Fix CS polarity if GPIO descriptors are used
  spi: qup: call spi_qup_pm_resume_runtime before suspending
  spi: spi-omap2-mcspi: Support probe deferral for DMA channels
  spi: spi-omap2-mcspi: Handle DMA size restriction on AM65x

Merge tag 'regulator-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A couple of small fixes, one for a minor issue in the stm32-vrefbuf
  driver and a documentation fix in the Qualcomm code"

* tag 'regulator-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling
  regulator: qcom_spmi: Fix docs for PM8004

Merge tag 'hwmon-for-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix an error return in the adt7462 driver, bad voltage limits reported
  by the xdpe12284 driver, and a broken documentation reference in the
  adm1177 driver documentation"

* tag 'hwmon-for-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()
  hwmon: (pmbus/xdpe12284) Add callback for vout limits conversion
  docs: adm1177: fix a broken reference

Pull arm64 fixes from Will Deacon:
 "Here are another three arm64 fixes for 5.6, all pretty minor. Main
  thing is fixing a silly bug in the fsl_imx8_ddr PMU driver where we
  would zero the counters when disabling them.

   - Fix misreporting of ASID limit when KPTI is enabled

   - Fix busted NULL pointer checks for GICC structure in ACPI PMU code

   - Avoid nobbling the "fsl_imx8_ddr" PMU counters when disabling them"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: context: Fix ASID limit in boot messages
  drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer
  drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition

When syzkaller tests, there is a UAF:
  BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr
    ffff880000100000
  Read of size 2 by task syz-executor.1/16489
  page:ffffea0000004000 count:0 mapcount:-127 mapping:          (null)
  index:0x0
  page flags: 0xfffff00000000()
  page dumped because: kasan: bad access detected
  CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
  Call Trace:
    [<ffffffffb119f309>] dump_stack+0x1e/0x20
    [<ffffffffb04af957>] kasan_report+0x577/0x950
    [<ffffffffb04ae652>] __asan_load2+0x62/0x80
    [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110
    [<ffffffffb0a39d95>] invert_screen+0xe5/0x470
    [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0
    [<ffffffffb0a3bfae>] tioclinux+0xee/0x490
    [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670
    [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10
    [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40
    [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170
    [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27
    Memory state around the buggy address:
     ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     00 00
     ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00
     00 00 00
    >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff
     ff ff ff

It can be reproduce in the linux mainline by the program:
  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <fcntl.h>
  #include <sys/types.h>
  #include <sys/stat.h>
  #include <sys/ioctl.h>
  #include <linux/vt.h>

  struct tiocl_selection {
    unsigned short xs;      /* X start */
    unsigned short ys;      /* Y start */
    unsigned short xe;      /* X end */
    unsigned short ye;      /* Y end */
    unsigned short sel_mode; /* selection mode */
  };

  #define TIOCL_SETSEL    2
  struct tiocl {
    unsigned char type;
    unsigned char pad;
    struct tiocl_selection sel;
  };

  int main()
  {
    int fd = 0;
    const char *dev = "/dev/char/4:1";

    struct vt_consize v = {0};
    struct tiocl tioc = {0};

    fd = open(dev, O_RDWR, 0);

    v.v_rows = 3346;
    ioctl(fd, VT_RESIZEX, &v);

    tioc.type = TIOCL_SETSEL;
    ioctl(fd, TIOCLINUX, &tioc);

    return 0;
  }

When resize the screen, update the 'vc->vc_size_row' to the new_row_size,
but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base'
for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe
smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc
the offset, it maybe larger than the vga_vram_size in vgacon driver, then
bad access.
Also, if set an larger screenbuf firstly, then set an more larger
screenbuf, when copy old_origin to new_origin, a bad access may happen.

So, If the screen size larger than vga_vram, resize screen should be
failed. This alse fix CVE-2020-8649 and CVE-2020-8647.

Linus pointed out that overflow checking seems absent. We're saved by
the existing bounds checks in vc_do_resize() with rather strict
limits:

	if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW)
		return -EINVAL;

Fixes: 0aec4867 ("[PATCH] SVGATextMode fix")
Reference: CVE-2020-8647 and CVE-2020-8649
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[danvet: augment commit message to point out overflow safety]
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangxiaoxu5@huawei.com

The hierarchical topology with power-domain should be described through
child nodes, rather than as currently described in the PSCI root node. Fix
this by adding a patternProperties with a corresponding reference to the
power-domain DT binding.

Additionally, update the example to conform to the new pattern, but also to
the adjusted domain-idle-state DT binding.

Fixes: a3f048b5 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: Add missing allOf, tweak power-domain node name]
Signed-off-by: Rob Herring <robh@kernel.org>

The existing binding requires the nodename to have a '@', which is a bit
limiting for the wider use case. Therefore, let's extend the pattern to
allow either '@' or '-'.

Fixes: a3f048b5 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: drop example change]
Signed-off-by: Rob Herring <robh@kernel.org>

The percpu refcount protects this structure, and we can have an atomic
switch in progress when exiting. This makes it unsafe to just free the
struct normally, and can trigger the following KASAN warning:

BUG: KASAN: use-after-free in percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
Read of size 1 at addr ffff888181a19a30 by task swapper/0/0

CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc4+ #5747
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x3b/0x60
 ? percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
 ? percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
 __kasan_report.cold+0x1a/0x3d
 ? percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
 percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
 rcu_core+0x370/0x830
 ? percpu_ref_exit+0x50/0x50
 ? rcu_note_context_switch+0x7b0/0x7b0
 ? run_rebalance_domains+0x11d/0x140
 __do_softirq+0x10a/0x3e9
 irq_exit+0xd5/0xe0
 smp_apic_timer_interrupt+0x86/0x200
 apic_timer_interrupt+0xf/0x20
 </IRQ>
RIP: 0010:default_idle+0x26/0x1f0

Fix this by punting the final exit and free of the struct to RCU, then
we know that it's safe to do so. Jann suggested the approach of using a
double rcu callback to achieve this. It's important that we do a nested
call_rcu() callback, as otherwise the free could be ordered before the
atomic switch, even if the latter was already queued.

Reported-by: syzbot+e017e49c39ab484ac87a@syzkaller.appspotmail.com
Suggested-by: Jann Horn <jannh@google.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

'16306a61 ("fs/locks: always delete_block after waiting.")' add the
logic to check waiter->fl_blocker without blocked_lock_lock. And it will
trigger a UAF when we try to wakeup some waiter：

Thread 1 has create a write flock a on file, and now thread 2 try to
unlock and delete flock a, thread 3 try to add flock b on the same file.

Thread2                         Thread3
                                flock syscall(create flock b)
	                        ...flock_lock_inode_wait
				    flock_lock_inode(will insert
				    our fl_blocked_member list
				    to flock a's fl_blocked_requests)
				   sleep
flock syscall(unlock)
...flock_lock_inode_wait
    locks_delete_lock_ctx
    ...__locks_wake_up_blocks
        __locks_delete_blocks(
	b->fl_blocker = NULL)
	...
                                   break by a signal
				   locks_delete_block
				    b->fl_blocker == NULL &&
				    list_empty(&b->fl_blocked_requests)
	                            success, return directly
				 locks_free_lock b
	wake_up(&b->fl_waiter)
	trigger UAF

Fix it by remove this logic, and this patch may also fix CVE-2019-19769.

Cc: stable@vger.kernel.org
Fixes: 16306a61 ("fs/locks: always delete_block after waiting.")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>

The bfq_find_set_group() function takes as input a blkcg (which represents
a cgroup) and retrieves the corresponding bfq_group, then it updates the
bfq internal group hierarchy (see comments inside the function for why
this is needed) and finally it returns the bfq_group.
In the hierarchy update cycle, the pointer holding the correct bfq_group
that has to be returned is mistakenly used to traverse the hierarchy
bottom to top, meaning that in each iteration it gets overwritten with the
parent of the current group. Since the update cycle stops at root's
children (depth = 2), the overwrite becomes a problem only if the blkcg
describes a cgroup at a hierarchy level deeper than that (depth > 2). In
this case the root's child that happens to be also an ancestor of the
correct bfq_group is returned. The main consequence is that processes
contained in a cgroup at depth greater than 2 are wrongly placed in the
group described above by BFQ.

This commits fixes this problem by using a different bfq_group pointer in
the update cycle in order to avoid the overwrite of the variable holding
the original group reference.
Reported-by: Kwon Je Oh <kwonje.oh2@gmail.com>
Signed-off-by: Carlo Nonato <carlo.nonato95@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge misc fixes from Andrew Morton:
 "7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  arch/Kconfig: update HAVE_RELIABLE_STACKTRACE description
  mm, hotplug: fix page online with DEBUG_PAGEALLOC compiled but not enabled
  mm/z3fold.c: do not include rwlock.h directly
  fat: fix uninit-memory access for partial initialized inode
  mm: avoid data corruption on CoW fault into PFN-mapped VMA
  mm: fix possible PMD dirty bit lost in set_pmd_migration_entry()
  mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking page tables prot_numa

Since commit 3bc3206e ("serial: fsl_lpuart: Remove the alias node
dependence") the port line number can also be allocated by IDA, but in
case of an error the ID will no be removed again. More importantly, any
ID will be freed in remove(), even if it wasn't allocated but instead
fetched by of_alias_get_id(). If it was not allocated by IDA there will
be a warning:
  WARN(1, "ida_free called for id=%d which is not allocated.\n", id);

Move the ID allocation more to the end of the probe() so that we still
can use plain return in the first error cases.

Fixes: 3bc3206e ("serial: fsl_lpuart: Remove the alias node dependence")
Signed-off-by: Michael Walle <michael@walle.cc>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200303174306.6015-3-michael@walle.ccSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>