The functions qcaspi_netdev_open/close are responsible of request &
free of the SPI interrupt, which wasn't the best choice because
allocation problems are discovered not during probe. So let us split
IRQ allocation & enabling, so we can take advantage of a device
managed IRQ.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Directly storing the result of kthread_run within the private
driver data makes it harder to identify if the pointer has a
running thread or not. So better use a local variable for
the result check and we don't have to care about error pointer
in the rest of the code.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

We better not rely on that spi_thread points to a running
thread. So add an check for this.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

On lan966x, it is possible to use debugfs to print different information
about the VCAPs. Information like, if it is enabled, how the ports are
configured, print the actual rules. The issue is that when printing how
the ports are configured for IS1 lookups, it was parsing the wrong
register to get this information. The fix consists in reading the
correct register that contains this information.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
ethtool: switch EEE netlink interface to use EEE linkmode bitmaps

So far only 32bit legacy bitmaps are passed to userspace. This makes
it impossible to manage EEE linkmodes beyond bit 32, e.g. manage EEE
for 2500BaseT and 5000BaseT. This series adds support for passing
full linkmode bitmaps between kernel and userspace.

Fortunately the netlink-based part of ethtool is quite smart and no
changes are needed in ethtool. However this applies to the netlink
interface only, the ioctl interface for now remains restricted to
legacy bitmaps.

Next step will be adding support for the c45 EEE2 standard registers
(3.21, 7.62, 7.63) to the genphy_c45 functions dealing with EEE.
I have a follow-up series for this ready to be submitted.

v2:
- now as RFC
- adopt suggestion from Andrew to start with struct ethtool_keee
  being an identical copy of ethtool_eee, and switch all users
v3:
- switch from RFC to net-next
- add patch 4, and reuse old names in patch 5
- rebase patch 1
v4:
- fix missing replacement in patch 4
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Change genphy_c45_ethtool_[get|set]_eee to use EEE linkmode bitmaps.
This is a prerequisite for adding support for EEE modes beyond bit 31.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add linkmode bitmap members to struct ethtool_keee, but keep the legacy
u32 bitmaps for compatibility with existing drivers.
Use linkmode "supported" not being empty as indicator that a user wants
to use the linkmode bitmap members instead of the legacy bitmaps.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is in preparation of using the existing names for linkmode
bitmaps.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the following in struct ethtool_keee
- remove member cmd, it's not needed on kernel side
- remove reserved fields
- switch the semantically boolean members to type bool

We don't have to change any user of the boolean members due to the
implicit casting from/to bool. A small change is needed where a
pointer to bool members is used, in addition remove few now unneeded
double negations.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to later extend struct ethtool_keee, we have to decouple it
from the userspace format represented by struct ethtool_eee.
Therefore switch back to struct ethtool_eee, representing the userspace
format, and add conversion between ethtool_eee and ethtool_keee.
Struct ethtool_keee will be changed in follow-up patches, therefore
don't do a *keee = *eee here.
Member cmd isn't copied, because it's not used, and we'll remove
it in the next patch of this series. In addition omit setting cmd
to ETHTOOL_GEEE in the ioctl response, userspace ethtool isn't
interested in it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtool_eee with linkmode
bitmaps. Therefore, similar to ethtool_link_settings and
ethtool_link_ksettings, add a struct ethtool_keee. In a first step
it's an identical copy of ethtool_eee. This patch simply does a
s/ethtool_eee/ethtool_keee/g for all users.
No functional change intended.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rohan G says:

====================
net: stmmac: EST conformance support

This patchset enables support for queueMaxSDU and transmission overrun
counters which are required for Qbv conformance.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Report taprio offload status. This includes per txq and global
counters of window_drops and tx_overruns.

Window_drops count include count of frames dropped because of
queueMaxSDU setting and HLBF error. Transmission overrun counter
inform the user application whether any packets are currently being
transmitted on a particular queue during a gate-close event.DWMAC IPs
takes care Transmission overrun won't happen hence this is always 0.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Keep per Tx-queue error count on Head-Of-Line Blocking due to frame
size(HLBF) error. The MAC raises HLBF error on one or more queues
when none of the time Intervals of open-gates in the GCL is greater
than or equal to the duration needed for frame transmission and by
default drops those packets that causes HLBF error. EST_FRM_SZ_ERR
register provides the One Hot encoded Queue numbers that have the
Frame Size related error.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for configuring queueMaxSDU. As DWMAC IPs doesn't support
queueMaxSDU table handle this in the SW. The maximum 802.3 frame size
that is allowed to be transmitted by any queue is queueMaxSDU +
16 bytes (i.e. 6 bytes SA + 6 bytes DA + 4 bytes FCS).

Inspired from intel i225 driver.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This test validates per-band packet limits in FQ. Packets are dropped
rather than enqueued if the limit for their band is reached.

This test is timing sensitive. It queues packets in FQ with a future
delivery time to fill the qdisc.

The test failed in a virtual environment (vng). Increase the delays
to make it more tolerant to environments with timing variance.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benjamin Poirier says:

====================
selftests: Add TEST_INCLUDES directive and adjust tests to use it

After commit 25ae948b ("selftests/net: add lib.sh") but before commit
2114e833 ("selftests: forwarding: Avoid failures to source
net/lib.sh"), some net selftests encountered errors when they were being
exported and run. This was because the new net/lib.sh was not exported
along with the tests. The errors were crudely avoided by duplicating some
content between net/lib.sh and net/forwarding/lib.sh in 2114e833.

In order to restore the sourcing of net/lib.sh from net/forwarding/lib.sh
and remove the duplicated content, this series introduces a new selftests
Makefile variable to list extra files to export from other directories and
makes use of it to avoid reintroducing the errors mentioned above.

v2:
* "selftests: Introduce Makefile variable to list shared bash scripts"
Fix rst syntax in Documentation/dev-tools/kselftest.rst (Jakub Kicinski)

v1:
* "selftests: Introduce Makefile variable to list shared bash scripts"
Changed TEST_INCLUDES to take relative paths, like other TEST_* variables.
Paths are adjusted accordingly in the subsequent patches. (Vladimir Oltean)

* selftests: bonding: Change script interpreter
  selftests: forwarding: Remove executable bits from lib.sh
Removed from this series, submitted separately.

Since commit 2114e833 ("selftests: forwarding: Avoid failures to source
net/lib.sh") resolved the test errors, this version of the series is
focused on removing the duplication that was added in that commit. Directly
rebasing the series would reintroduce the problems that 2114e833
avoided before fixing them again. In order to prevent such breakage partway
through the series, patches are reordered and content changed slightly but
there is no diff at the end compared with the simple rebasing approach. I
have dropped most review tags on account of this reordering.

RFC:
https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/

Link: https://lore.kernel.org/netdev/ZXu7dGj7F9Ng8iIX@Laptop-X1/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 25ae948b ("selftests/net: add lib.sh") added net/lib.sh to
contain code shared by tests under net/ and net/forwarding/. However, this
caused issues with selftests from directories other than net/forwarding/,
in particular those under drivers/net/. Those issues were avoided in a
simple way by duplicating some content in commit 2114e833 ("selftests:
forwarding: Avoid failures to source net/lib.sh").

In order to remove the duplicated content, restore the inclusion of
net/lib.sh from net/forwarding/lib.sh but with the following changes:

* net/lib.sh is imported through the net_forwarding_dir path
The original expression "source ../lib.sh" would look for lib.sh in the
directory above the script file's one, which did not work for tests under
drivers/net/.

* net/lib.sh is added to TEST_INCLUDES
Since net/forwarding/lib.sh now sources net/lib.sh, both of those files
must be exported along with tests which source net/forwarding/lib.sh.
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following code which is part of lib.sh:
relative_path="${BASH_SOURCE%/*}"
if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
       relative_path="."
fi

reimplements functionality that is part of `dirname`:
$ dirname ""
.

To avoid this duplication, replace "relative_path" by "net_forwarding_dir",
a new variable defined using dirname.

Furthermore, to avoid the potential confusion about what "relative_path" is
about (cwd, test script directory or test library directory), define
"net_forwarding_dir" as the absolute path to net/forwarding/.
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dsa tests which are symlinks of tests from net/forwarding/ (like
tc_actions.sh) become regular files after export (because `rsync
--copy-unsafe-links` is used) and expect to source lib.sh
(net/forwarding/lib.sh) from the same directory.

In the last patch of this series, net/forwarding/lib.sh will source lib.sh
from its parent directory (ie. net/lib.sh). This would not work for dsa
tests because net/lib.sh is not present under drivers/net/.

Since the tests in net/forwarding/ are not meant to be copied and run from
another directory, as a preparation for that last patch, replace the test
symlinks by a wrapper script which runs the original tests under
net/forwarding/. Following from that, the links to shared library scripts
in dsa/ are no longer used so remove them and add all the original files
needed from parent directories to TEST_INCLUDES.
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to avoid duplicated files when both the team and bonding tests are
exported together, add lag_lib.sh to TEST_INCLUDES.

Do likewise for net/forwarding/lib.sh regarding team and forwarding tests.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to avoid duplicated files when both the bonding and forwarding
tests are exported together, add net/forwarding/lib.sh to TEST_INCLUDES and
include it via its relative path.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some tests written in bash source other files in a parent directory. For
example, drivers/net/bonding/dev_addr_lists.sh sources
net/forwarding/lib.sh. If a subset of tests is exported and run outside the
source tree (for example by using `make -C tools/testing/selftests gen_tar
TARGETS="drivers/net/bonding"`), these other files must be made available
as well.

Commit ae108c48 ("selftests: net: Fix cross-tree inclusion of scripts")
addressed this problem by symlinking and copying the sourced files but this
only works for direct dependencies. Commit 25ae948b ("selftests/net:
add lib.sh") changed net/forwarding/lib.sh to source net/lib.sh. As a
result, that latter file must be included as well when the former is
exported. This was not handled and was reverted in commit 2114e833
("selftests: forwarding: Avoid failures to source net/lib.sh"). In order to
allow reinstating the inclusion of net/lib.sh from net/forwarding/lib.sh,
add a mechanism to list dependent files in a new Makefile variable and
export them. This allows sourcing those files using the same expression
whether tests are run in-tree or exported.

Dependencies are not resolved recursively so transitive dependencies must
be listed in TEST_INCLUDES. For example, if net/forwarding/lib.sh sources
net/lib.sh; the Makefile related to a test that sources
net/forwarding/lib.sh from a parent directory must list:
TEST_INCLUDES := \
	../../../net/forwarding/lib.sh \
	../../../net/lib.sh

v2:
Fix rst syntax in Documentation/dev-tools/kselftest.rst (Jakub Kicinski)

v1 (from RFC):
* changed TEST_INCLUDES to take relative paths, like other TEST_* variables
  (Vladimir Oltean)
* preserved common "$(MAKE) OUTPUT=... -C ... target" ordering in Makefile
  (Petr Machata)
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cristian Ciocaltea says:

====================
StarFive DWMAC support for JH7100

This is just a subset of the initial patch series [1] adding networking
support for StarFive JH7100 SoC.

[1]: https://lore.kernel.org/lkml/20231218214451.2345691-1-cristian.ciocaltea@collabora.com/

Changes in v4:
 - Rebased series onto next-20240125
 - Added R-b tag from Rob in PATCH 1
 - v3:
   https://lore.kernel.org/lkml/20231222101001.2541758-1-cristian.ciocaltea@collabora.com/

Changes in v3:
 - Optimized jh7110 resets & reset-names properties (Rob)
 - Added R-b tag from Jacob in PATCH 1
 - v2:
   https://lore.kernel.org/lkml/20231220002824.2462655-1-cristian.ciocaltea@collabora.com/

Changes in v2:
 - Add the missing binding patch (Conor)
 - v1:
   https://lore.kernel.org/lkml/20231219231040.2459358-1-cristian.ciocaltea@collabora.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a missing quirk to enable support for the StarFive JH7100 SoC.

Additionally, for greater flexibility in operation, allow using the
rgmii-rxid and rgmii-txid phy modes.
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Synopsys DesignWare MAC found on StarFive JH7100 SoC is mostly
similar to the newer JH7110, but it requires only two interrupts and a
single reset line, which is 'ahb' instead of the commonly used
'stmmaceth'.

Since the common binding 'snps,dwmac' allows selecting 'ahb' only in
conjunction with 'stmmaceth', extend the logic to also permit exclusive
usage of the 'ahb' reset name.  This ensures the following use cases are
supported:

  JH7110: reset-names = "stmmaceth", "ahb";
  JH7100: reset-names = "ahb";
  other:  reset-names = "stmmaceth";

Also note the need to use a different dwmac fallback, as v5.20 applies
to JH7110 only, while JH7100 relies on v3.7x.

Additionally, drop the reset description items from top-level binding as
they are already provided by the included snps,dwmac schema.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Class-based I2C probing requires detect() and address_list to be
set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if this
precondition isn't met.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/77b5ab8e-20f2-4310-bd89-57db99e2f53b@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/8e889d18a6c881b09db4650d4b30a62d76f4fe77.1705734073.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240124075801.471330-1-chentao@kylinos.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says:

====================
mlxsw: Refactor reference counting code

Amit Cohen writes:

This set converts all reference counters defined as 'unsigned int' to
refcount_t type. The reference counting of LAGs can be simplified, so first
refactor the related code and then change the type of the reference
counter.

Patch set overview:
Patches #1-#4 are preparations for LAG refactor
Patch #5 refactors LAG code and change the type of reference counter
Patch #6 converts the remaining reference counters in mlxsw driver
====================

Link: https://lore.kernel.org/r/cover.1706293430.git.petrm@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

mlxsw driver uses 'unsigned int' for reference counters in several
structures. Instead, use refcount_t type which allows us to catch overflow
and underflow issues. Change the type of the counters and use the
appropriate API.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mlxsw_sp stores an array of LAGs. When a port joins a LAG, in case that
this LAG is already in use, we only have to increase the reference counter.
Otherwise, we have to search for an unused LAG ID and configure it in
hardware. When a port leaves a LAG, we have to destroy it only for the last
user. This code can be simplified, for such requirements we usually add
get() and put() functions which create and destroy the object.

Add mlxsw_sp_lag_{get,put}() and use them. These functions take care of
the reference counter and hardware configuration if needed. Change the
reference counter to refcount_t type which catches overflow and underflow
issues.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, the function mlxsw_sp_lag_index_get() is called twice - first
as part of NETDEV_PRECHANGEUPPER event and later as part of
NETDEV_CHANGEUPPER. This function will be changed in the next patch. To
simplify the code, call it only once as part of NETDEV_CHANGEUPPER
event and set an error message using 'extack' in case of failure.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The maximum number of LAGs is queried from core several times. It is
used to allocate LAG array, and then to iterate over it. In addition, it
is used for PGT initialization. To simplify the code, instead of
querying it several times, store the value as part of 'mlxsw_sp' and use
it.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

A next patch will add mlxsw_sp_lag_{get,put}() functions to handle LAG
reference counting and create/destroy it only for first user/last user.
Remove mlxsw_sp_lag_get() function and access LAG array directly.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The structure mlxsw_sp_upper is used only as LAG. Rename it to
mlxsw_sp_lag and move it to spectrum.c file, as it is used only there.
Move the function mlxsw_sp_lag_get() with the structure.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The config file contains a partial kernel configuration to be used by
`virtme-configkernel --custom'. The presumption is that the config file
contains all Kconfig options needed by the selftests from the directory.

In net/forwarding/config, many are missing, which manifests as spurious
failures when running the selftests, with messages about unknown device
types, qdisc kinds or classifier actions. Add the missing configurations.

Tested the resulting configuration using virtme-ng as follows:

 # vng -b -f tools/testing/selftests/net/forwarding/config
 # vng --user root
 (within the VM:)
 # make -C tools/testing/selftests TARGETS=net/forwarding run_tests
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/025abded7ff9cea5874a7fe35dcd3fd41bf5e6ac.1706286755.git.petrm@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When setting or getting PHC time, the higher bits of the second time (>32
bits) they were ignored. Meaning that setting some time in the future like
year 2150, it was failing to set this.

The issue can be reproduced like this:

 # phc_ctl /dev/ptp1 set 10000000000
 phc_ctl[12.290]: set clock time to 10000000000.000000000 or Sat Nov 20 17:46:40 2286

 # phc_ctl /dev/ptp1 get
 phc_ctl[15.309]: clock time is 1410065411.018055420 or Sun Sep  7 04:50:11 2014
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240126073042.1845153-1-horatiu.vultur@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Use the inline function reciprocal_scale rather than open coding
the scale optimization.  Also, remove unnecessary initializations.
Resulting compiled code is unchanged (according to godbolt).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240126002550.169608-1-stephen@networkplumber.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Tony Nguyen says:

====================
ice: fix timestamping in reset process

Karol Kolacinski says:

PTP reset process has multiple places where timestamping can end up in
an incorrect state.

This series introduces a proper state machine for PTP and refactors
a large part of the code to ensure that timestamping does not break.

The following are changes since commit 91374ba5:
  net: dsa: mt7530: support OF-based registration of switch MDIO bus
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 100GbE
====================

Link: https://lore.kernel.org/r/20240125215757.2601799-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>