- 02 Apr, 2015 3 commits
-
-
Boris Ostrovsky authored
Some of x86 bare-metal and Xen CPU initialization code is common between the two and therefore can be factored out to avoid code duplication. As a side effect, doing so will also extend the fix provided by commit a7fcf28d ("x86/asm/entry: Replace this_cpu_sp0() with current_top_of_stack() to x86_32") to 32-bit Xen PV guests. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: konrad.wilk@oracle.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1427897534-5086-1-git-send-email-boris.ostrovsky@oracle.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Denys Vlasenko authored
__BOOT_TSS = (GDT_ENTRY_BOOT_TSS * 8) GDT_ENTRY_BOOT_TSS = (GDT_ENTRY_BOOT_CS + 2) GDT_ENTRY_BOOT_CS = 2 (2 + 2) * 8 = 4 * 8 = 32 = 0x20 No code changes. Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
Borislav Petkov <bp@suse.de> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427899858-7165-2-git-send-email-dvlasenk@redhat.comSigned-off-by:
-
Denys Vlasenko authored
No code changes. Signed-off-by:
-
- 01 Apr, 2015 7 commits
-
-
Denys Vlasenko authored
Logically, we just want to jump around the following instruction and its prologue/epilogue: call *sys_call_table(,%rax,8) if the syscall number is too big - we do not specifically target the "int_ret_from_sys_call" label. Use a local, numerical label for this jump, for more clarity. This also makes the code smaller: -ffffffff8187756b: 0f 87 0f 00 00 00 ja ffffffff81877580 <int_ret_from_sys_call> +ffffffff8187756b: 77 0f ja ffffffff8187757c <int_ret_from_sys_call> because jumps to global labels are never translated to short jump instructions by GAS. Signed-off-by:
-
Denys Vlasenko authored
There is no reason to use MOVQ to load a non-negative immediate constant value into a 64-bit register. MOVL does the same, since the upper 32 bits are zero-extended by the CPU. This makes the code a bit smaller, while leaving functionality unchanged. Signed-off-by:
-
Denys Vlasenko authored
At the 'exit_intr' label we test whether interrupt/exception was in kernel. If it did, we jump to the preemption check. If preemption does happen (IOW if we call preempt_schedule_irq()), we go back to 'exit_intr'. But it's pointless, we already know that the test succeeded last time, preemption doesn't change the fact that interrupt/exception was in the kernel. We can go back directly to checking PER_CPU_VAR(__preempt_count) instead. This makes the 'exit_intr' label unused, drop it. Signed-off-by:
-
Denys Vlasenko authored
At this location, we already have interrupts off, always. To be more specific, we already disabled them here: ret_from_intr: DISABLE_INTERRUPTS(CLBR_NONE) Signed-off-by: -
Denys Vlasenko authored
Get rid of #define obfuscation of retint_kernel in CONFIG_PREEMPT case by defining retint_kernel label always, not only for CONFIG_PREEMPT. Strip retint_kernel of .global-ness (ENTRY macro) - it has no users outside of this file. This looks like cosmetics, but it is not: "je LABEL" can be optimized to short jump by assember only if LABEL is not global, for global labels jump is always a near one with relocation. Convert retint_restore_args to a local numeric label, making it clearer that it is not used elsewhere in the file. Signed-off-by:
-
Denys Vlasenko authored
This mimics the recent similar 64-bit change. Saves ~110 bytes of code. Patch was run-tested on 32 and 64 bits, Intel and AMD CPU. I also looked at the diff of entry_64.o disassembly, to have a different view of the changes. Signed-off-by:
-
Denys Vlasenko authored
SYSRET code path has a small irq-off block. On this code path, TRACE_IRQS_ON can't be called right before interrupts are enabled for real, we can't clobber registers there. So current code does it earlier, in a safe place. But with this, TRACE_IRQS_OFF/ON frames just two fast instructions, which is ridiculous: now most of irq-off block is _outside_ of the framing. Do the same thing that we do on SYSCALL entry: do not track this irq-off block, it is very small to ever cause noticeable irq latency. Be careful: make sure that "jnz int_ret_from_sys_call_irqs_off" now does invoke TRACE_IRQS_OFF - move int_ret_from_sys_call_irqs_off label before TRACE_IRQS_OFF. Signed-off-by:
-
- 31 Mar, 2015 3 commits
-
-
Ingo Molnar authored
user_mode_ignore_vm86() can be used instead of user_mode(), in places where we have already done a v8086_mode() security check of ptregs. But doing this check in the wrong place would be a bug that could result in security problems, and also the naming still isn't very clear. Furthermore, it only affects 32-bit kernels, while most development happens on 64-bit kernels. If we replace them with user_mode() checks then the cost is only a very minor increase in various slowpaths: text data bss dec hex filename 10573391 703562 1753042 13029995 c6d26b vmlinux.o.before 10573423 703562 1753042 13030027 c6d28b vmlinux.o.after So lets get rid of this distinction once and for all. Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150329090233.GA1963@gmail.comSigned-off-by:
-
Denys Vlasenko authored
At exit_intr, we GET_THREAD_INFO(%rcx) and then jump to retint_kernel if saved CS was from kernel. But the code at retint_kernel doesn't need %rcx. Move GET_THREAD_INFO(%rcx) down, after CS check and branch. While at it, remove "has a correct top of stack" comment. After recent changes which eliminated FIXUP_TOP_OF_STACK, we always have a correct pt_regs layout. Signed-off-by:
-
Denys Vlasenko authored
The "retint_kernel" code block is misplaced. Since its logical continuation is "retint_restore_args", it is more natural to place it above that label. This also makes two jumps "short". This change only moves code block around, without changing logic. This enables the next simplification: making "retint_restore_args" label a local numeric one. Signed-off-by:
-
- 27 Mar, 2015 9 commits
-
-
Denys Vlasenko authored
There are a couple of syscall argument zero-extension instructions in the 32-bit compat entry code, and it was mentioned that people keep trying to optimize them out, introducing bugs. Make them more visible, and add a "do not remove" comment. Signed-off-by:
-
Denys Vlasenko authored
The existing comment has proven to be not very clear. Replace it with a comment similar to the one we now have in the 64-bit syscall entry point. (Three instances, one per 32-bit syscall entry). In the INT80 entry point's CFI annotations, replace mysterious expressions with numric constants. In this case, raw numbers look more understandable. Signed-off-by:
-
Denys Vlasenko authored
This is a missing bit of the recent MOV-to-PUSH conversion. Signed-off-by:
-
Denys Vlasenko authored
The comment is ancient, it dates to the time when only AMD's x86_64 implementation existed. AMD wasn't (and still isn't) supporting SYSENTER, so these writes were "just in case" back then. This has changed: Intel's x86_64 appeared, and Intel does support SYSENTER in long mode. "Some future 64-bit CPU" is here already. The code may appear "buggy" for AMD as it stands, since MSR_IA32_SYSENTER_EIP is only 32-bit for AMD CPUs. Writing a kernel function's address to it would drop high bits. Subsequent use of this MSR for branch via SYSENTER seem to allow user to transition to CPL0 while executing his code. Scary, eh? Explain why that is not a bug: because SYSENTER insn would not work on AMD CPU. Signed-off-by:
-
Denys Vlasenko authored
Internally, lockdep_sys_exit_thunk saves callee-clobbered registers, and calls a C function, lockdep_sys_exit. Thus, callee-preserved registers won't be mangled, there is no need to save them. Patch was run-tested. Signed-off-by:
-
Denys Vlasenko authored
There is no need to have an extra level of macro indirection here. Signed-off-by:
-
Denys Vlasenko authored
This change simply moves defines around (even if it's not obvious in a patch form). Nothing is changed. This is a preparation for folding ARCH_LOCKDEP_SYS_EXIT defines into their users. Signed-off-by:
-
Denys Vlasenko authored
The $AUDIT_ARCH_X86_64 parameter to syscall_trace_enter_phase1/2 is a 32-bit constant, loading it with 32-bit MOV produces 5-byte insn instead of 10-byte MOVABS one. Signed-off-by:
-
Denys Vlasenko authored
A named label "ret_from_sys_call" implies that there are jumps to this location from elsewhere, as happens with many other labels in this file. But this label is used only by the JMP a few insns above. To make that obvious, use local numeric label instead. Improve comments: "and return regs->ax" isn't too informative. We always return regs->ax. The comment suggesting that it'd be cool to use rip relative addressing for CALL is deleted. It's unclear why that would be an improvement - we aren't striving to use position-independent code here. PIC code here would require something like LEA sys_call_table(%rip),reg + CALL *(reg,%rax*8)... "iret frame is also incomplete" is no longer true, fix that too. Also fix typo in comment. Signed-off-by:
-
- 25 Mar, 2015 1 commit
-
-
Ingo Molnar authored
Conflicts: arch/x86/kernel/entry_64.S Signed-off-by:
-
- 24 Mar, 2015 13 commits
-
-
Ingo Molnar authored
- extend/clarify explanations where necessary - move comments from macro values to before the macro, to make them more consistent, and to reduce preprocessor overhead - sort GDT index and selector values likewise by number - use consistent, modern kernel coding style across the file - capitalize consistently - use consistent vertical spacing - remove the unused get_limit() method (noticed by Andy Lutomirski) No change in code (verified with objdump -d): 64-bit defconfig+kvmconfig: 815a129bc1f80de6445c1d8ca5b97cad vmlinux.o.before.asm 815a129bc1f80de6445c1d8ca5b97cad vmlinux.o.after.asm 32-bit defconfig+kvmconfig: e659ef045159ddf41a0771b33a34aae5 vmlinux.o.before.asm e659ef045159ddf41a0771b33a34aae5 vmlinux.o.after.asm Acked-by:
Andy Lutomirski <luto@amacapital.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Signed-off-by:
-
Andy Lutomirski authored
We currently have a race: if we're preempted during syscall exit, we can fail to process syscall return work that is queued up while we're preempted in ret_from_sys_call after checking ti.flags. Fix it by disabling interrupts before checking ti.flags. Reported-by:
Stefan Seyfried <stefan.seyfried@googlemail.com> Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ingo Molnar authored
The THREAD_INFO() macro has a somewhat confusingly generic name, defined in a generic .h C header file. It also does not make it clear that it constructs a memory operand for use in assembly code. Rename it to ASM_THREAD_INFO() to make it all glaringly obvious on first glance. Acked-by:
-
Ingo Molnar authored
Before: TI_sysenter_return+THREAD_INFO(%rsp,3*8),%r10d After: movl THREAD_INFO(TI_sysenter_return, %rsp, 3*8), %r10d to turn it into a clear thread_info accessor. No code changed: md5: fb4cb2b3ce05d89940ca304efc8ff183 ia32entry.o.before.asm fb4cb2b3ce05d89940ca304efc8ff183 ia32entry.o.after.asm e39f2958a5d1300158e276e4f7663263 entry_64.o.before.asm e39f2958a5d1300158e276e4f7663263 entry_64.o.after.asm Acked-by:
-
Ingo Molnar authored
Explain the background, and add a real example. Acked-by:
-
Ingo Molnar authored
On CONFIG_IA32_EMULATION=y kernels we set up MSR_IA32_SYSENTER_CS/ESP/EIP, but on !CONFIG_IA32_EMULATION kernels we leave them unchanged. Clear them to make sure the instruction is disabled properly. SYSCALL is set up properly in both cases. Acked-by:
-
Denys Vlasenko authored
This file just defines a number of constants, and a few macros and inline functions. It is particularly badly written. For example, it is not trivial to see how descriptors are numbered (you'd expect that should be easy, right?). This change deobfuscates it via the following changes: Group all GDT_ENTRY_foo together (move intervening stuff away). Number them explicitly: use a number, not PREV_DEFINE+1, +2, +3: I want to immediately see that GDT_ENTRY_PNPBIOS_CS32 is 18. Seeing (GDT_ENTRY_KERNEL_BASE+6) instead is not useful. The above change allows to remove GDT_ENTRY_KERNEL_BASE and GDT_ENTRY_PNPBIOS_BASE, which weren't used anywhere else. After a group of GDT_ENTRY_foo, define all selector values. Remove or improve some comments. In particular: Comment deleted as stating the obvious: /* * The GDT has 32 entries */ #define GDT_ENTRIES 32 "The segment offset needs to contain a RPL. Grr. -AK" changed to "Selectors need to also have a correct RPL (+3 thingy)" "GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets)" expanded into a description *how exactly* sysret hardcodes them. Patch was tested to compile and not change vmlinux.o on 32-bit and 64-bit builds (verified with objdump). Signed-off-by: -
Denys Vlasenko authored
With the FIXUP_TOP_OF_STACK macro removed, this intermediate jump is unnecessary. Signed-off-by:
-
Denys Vlasenko authored
The FIXUP_TOP_OF_STACK macro is only necessary because we don't save %r11 to pt_regs->r11 on SYSCALL64 fast path, but we want ptrace to see it populated. Bite the bullet, add a single additional PUSH instruction, and remove the FIXUP_TOP_OF_STACK macro. The RESTORE_TOP_OF_STACK macro is already a nop. Remove it too. On SandyBridge CPU, it does not get slower: measured 54.22 ns per getpid syscall before and after last two changes on defconfig kernel. Signed-off-by:
-
Denys Vlasenko authored
With this change, on SYSCALL64 code path we are now populating pt_regs->cs, pt_regs->ss and pt_regs->rcx unconditionally and therefore don't need to do that in FIXUP_TOP_OF_STACK. We lose a number of large instructions there: text data bss dec hex filename 13298 0 0 13298 33f2 entry_64_before.o 12978 0 0 12978 32b2 entry_64.o What's more important, we convert two "MOVQ $imm,off(%rsp)" to "PUSH $imm" (the ones which fill pt_regs->cs,ss). Before this patch, placing them on fast path was slowing it down by two cycles: this form of MOV is very large, 12 bytes, and this probably reduces decode bandwidth to one instruction per cycle when CPU sees them. Therefore they were living in FIXUP_TOP_OF_STACK instead (away from fast path). "PUSH $imm" is a small 2-byte instruction. Moving it to fast path does not slow it down in my measurements. Signed-off-by: -
Denys Vlasenko authored
PER_CPU_VAR(kernel_stack) was set up in a way where it points five stack slots below the top of stack. Presumably, it was done to avoid one "sub $5*8,%rsp" in syscall/sysenter code paths, where iret frame needs to be created by hand. Ironically, none of them benefits from this optimization, since all of them need to allocate additional data on stack (struct pt_regs), so they still have to perform subtraction. This patch eliminates KERNEL_STACK_OFFSET. PER_CPU_VAR(kernel_stack) now points directly to top of stack. pt_regs allocations are adjusted to allocate iret frame as well. Hopefully we can merge it later with 32-bit specific PER_CPU_VAR(cpu_current_top_of_stack) variable... Net result in generated code is that constants in several insns are changed. This change is necessary for changing struct pt_regs creation in SYSCALL64 code path from MOV to PUSH instructions. Signed-off-by:
-
Denys Vlasenko authored
This changes the THREAD_INFO() definition and all its callsites so that they do not count stack position from (top of stack - KERNEL_STACK_OFFSET), but from top of stack. Semi-mysterious expressions THREAD_INFO(%rsp,RIP) - "why RIP??" are now replaced by more logical THREAD_INFO(%rsp,SIZEOF_PTREGS) - "calculate thread_info's address using information that rsp is SIZEOF_PTREGS bytes below top of stack". While at it, replace "(off)-THREAD_SIZE(reg)" with equivalent "((off)-THREAD_SIZE)(reg)". The form without parentheses falsely looks like we invoke THREAD_SIZE() macro. Improve comment atop THREAD_INFO macro definition. This patch does not change generated code (verified by objdump). Signed-off-by:
-
Denys Vlasenko authored
Having syscall32/sysenter32 initialization in a separate tiny function, called from within a function that is already syscall init specific, serves no real purpose. Its existense also caused an unintended effect of having wrmsrl(MSR_CSTAR) performed twice: once we set it to a dummy function returning -ENOSYS, and immediately after (if CONFIG_IA32_EMULATION), we set it to point to the proper syscall32 entry point, ia32_cstar_target. Signed-off-by:
-
- 23 Mar, 2015 4 commits
-
-
Denys Vlasenko authored
The recent old_rsp -> rsp_scratch rename also changed this comment, but in this case "old_rsp" was not referring to PER_CPU(old_rsp). Fix this. Signed-off-by:
-
Andy Lutomirski authored
This allows us to remove some unnecessary ifdefs. There should be no change to the generated code. Signed-off-by:
-
Andy Lutomirski authored
It has no callers anymore. Signed-off-by:
-
Andy Lutomirski authored
user_mode_vm() and user_mode() are now the same. Change all callers of user_mode_vm() to user_mode(). The next patch will remove the definition of user_mode_vm. Signed-off-by:
-
