With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Thus, there is no need to call the PCI helper functions like
pci_enable_device, which is not recommended. Hence, removed.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Use "struct dev_pm_ops" variable to bind the callbacks.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Thus, there is no need to call the PCI helper functions like
pci_enable_wake(), pci_save/restore_sate() and
pci_set_power_state().

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Use "struct dev_pm_ops" variable to bind the callbacks.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Thus, there is no need to call the PCI helper functions like
pci_enable/disable_device(), pci_save/restore_sate() and
pci_set_power_state().

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Thus, there is no need to call the PCI helper functions like
pci_enable/disable_device(), pci_save/restore_sate() and
pci_set_power_state().

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions.

With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.

The driver defined empty-body .suspend() and .resume() callbacks earlier.
They can now be define NULL and bind with "struct dev_pm_ops" variable.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Thus, there is no need to call the PCI helper functions like
pci_save/restore_sate() and pci_set_power_state().

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Thus, there is no need to call the PCI helper functions like
pci_enable/disable_device(), pci_save/restore_sate() and
pci_set_power_state().

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states. And they use PCI
helper functions to do it.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

In this driver:
typhoon_resume() calls typhoon_wakeup() which then calls PCI helper
functions pci_set_power_state() and pci_restore_state(). The only other
function, using typhoon_wakeup() is typhoon_open().

Thus remove the pci_*() calls from tyhpoon_wakeup() and place them in
typhoon_open(), maintaining the order, to retain the normal behavior of
the function

Now, typhoon_suspend() calls typhoon_sleep() which then calls PCI helper
functions pci_enable_wake(), pci_disable_device() and
pci_set_power_state(). Other functions:
 - typhoon_open()
 - typhoon_close()
 - typhoon_init_one()
are also invoking typhoon_sleep(). Thus, in this case, cannot simply
move PCI helper functions call.

Hence, define a new function typhoon_sleep_early() which will do all the
operations, which typhoon_sleep() was doing before calling PCI helper
functions. Now typhoon_sleep() will call typhoon_sleep_early() to do
those tasks, hence, the behavior for _open(), _close and _init_one() remain
unchanged. And typhon_suspend() only requires typhoon_sleep_early().

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix sparse build warning:

drivers/net/ethernet/qlogic/qed/qed_main.c:2480:6: warning:
 symbol 'qed_hw_err_type_descr' was not declared. Should it be static?
Signed-off-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable err is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rahul Lakkireddy says:

====================
cxgb4: add mirror action support for TC-MATCHALL

This series of patches add support to mirror all ingress traffic
for TC-MATCHALL ingress offload.

Patch 1 adds support to dynamically create a mirror Virtual Interface
(VI) that accepts all mirror ingress traffic when mirror action is
set in TC-MATCHALL offload.

Patch 2 adds support to allocate mirror Rxqs and setup RSS for the
mirror VI.

Patch 3 adds support to replicate all the main VI configuration to
mirror VI. This includes replicating MTU, promiscuous mode,
all-multicast mode, and enabled netdev Rx feature offloads.

v3:
- Replace mirror VI refcount_t with normal u32 variable in all patches.
- Add back calling cxgb4_port_mirror_start() in cxgb_open(), which
  was there in v1, but got missed in v2 during refactoring, in patch
  3.

v2:
- Add mutex to protect all mirror VI data, instead of just
  mirror Rxqs, in patch 1 and 2.
- Remove the un-needed mirror Rxq mutex in patch 2.
- Simplify the replication code by refactoring t4_set_rxmode()
  to handle mirror VI, instead of duplicating the t4_set_rxmode()
  calls in multiple places in patch 3.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When mirror VI is enabled, replicate various VI config params
enabled on main VI to mirror VI. These include replicating MTU,
promiscuous mode, all-multicast mode, and enabled netdev Rx
feature offloads.

v3:
- Replace mirror VI refcount_t with normal u32 variable.
- Add back calling cxgb4_port_mirror_start() in cxgb_open(), which
  was there in v1, but got missed in v2 during refactoring.

v2:
- Simplify the replication code by refactoring t4_set_rxmode()
  to handle mirror VI, instead of duplicating the t4_set_rxmode()
  calls in multiple places.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When mirror VI is enabled, allocate the mirror Rxqs and setup the
mirror VI RSS table. The mirror Rxqs are allocated/freed when
the mirror VI is created/destroyed or when underlying port is
brought up/down, respectively.

v3:
- Replace mirror VI refcount_t with normal u32 variable.

v2:
- Use mutex to protect all mirror VI data, instead of just
  mirror Rxqs.
- Remove the un-needed mirror Rxq mutex.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mirror Virtual Interface (VI) support to receive all ingress
mirror traffic from the underlying device. The mirror VI is
created dynamically, if the TC-MATCHALL rule has a corresponding
mirror action. Also request MSI-X vectors needed for the mirror VI
Rxqs. If no vectors are available, then disable mirror VI support.

v3:
- Replace mirror VI refcount_t with normal u32 variable.

v2:
- Add mutex to protect all mirror VI data, instead of just
  mirror Rxqs.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In certain configurations without power management support, the
following warnings happen:

../drivers/net/ethernet/amd/pcnet32.c:2928:12: warning:
'pcnet32_pm_resume' defined but not used [-Wunused-function]
 2928 | static int pcnet32_pm_resume(struct device *device_d)
      |            ^~~~~~~~~~~~~~~~~
../drivers/net/ethernet/amd/pcnet32.c:2916:12: warning:
'pcnet32_pm_suspend' defined but not used [-Wunused-function]
 2916 | static int pcnet32_pm_suspend(struct device *device_d)
      |            ^~~~~~~~~~~~~~~~~~

Mark these functions as __maybe_unused to make it clear to the compiler
that this is going to happen based on the configuration, which is the
standard for these types of functions.

Fixes: a86688fb ("pcnet32: Convert to generic power management")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In certain configurations without power management support, the
following warnings happen:

../drivers/net/ethernet/amd/amd8111e.c:1623:12: warning:
'amd8111e_resume' defined but not used [-Wunused-function]
 1623 | static int amd8111e_resume(struct device *dev_d)
      |            ^~~~~~~~~~~~~~~
../drivers/net/ethernet/amd/amd8111e.c:1584:12: warning:
'amd8111e_suspend' defined but not used [-Wunused-function]
 1584 | static int amd8111e_suspend(struct device *dev_d)
      |            ^~~~~~~~~~~~~~~~

Mark these functions as __maybe_unused to make it clear to the compiler
that this is going to happen based on the configuration, which is the
standard for these types of functions.

Fixes: 2caf751f ("amd8111e: Convert to generic power management")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bartosz Golaszewski says:

====================
net: improve devres helpers

So it seems like there's no support for relaxing certain networking devres
helpers to not require previously allocated structures to also be managed.
However the way mdio devres variants are implemented is still wrong and I
modified my series to address it while keeping the functions strict.

First two patches modify the ixgbe driver to get rid of the last user of
devm_mdiobus_free().

Patches 3, 4, 5 and 6 are mostly cosmetic.

Patch 7 fixes the way devm_mdiobus_register() is implemented.

Patches 8 & 9 provide a managed variant of of_mdiobus_register() and
last patch uses it in mtk-star-emac driver.

v1 -> v2:
- drop the patch relaxing devm_register_netdev()
- require struct mii_bus to be managed in devm_mdiobus_register() and
  devm_of_mdiobus_register() but don't store that information in the
  structure itself: use devres_find() instead
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Shrink the code by using the managed variant of of_mdiobus_register().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement a managed variant of of_mdiobus_register(). We need to make
mdio_devres into its own module because otherwise we'd hit circular
sumbol dependencies between phylib and of_mdio.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'extern' keyword in headers doesn't have any benefit. Remove them
all from the of_mdio.h header.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently have two managed helpers for mdiobus - devm_mdiobus_alloc()
and devm_mdiobus_register(). The idea behind devres is that the release
callback releases whatever resource the devm function allocates. In the
mdiobus case however there's no devres associated with the device by
devm_mdiobus_register(). Instead the release callback for
devm_mdiobus_alloc(): _devm_mdiobus_free() unregisters the device if
it is marked as managed.

This all seems wrong. The managed structure shouldn't need to know or
care about whether it's managed or not - and this is the case now for
struct mii_bus. The devres wrapper should be opaque to the managed
resource.

This changeset makes devm_mdiobus_alloc() and devm_mdiobus_register()
conform to common devres standards: devm_mdiobus_alloc() allocates a
devres structure and registers a callback that will call mdiobus_free().
__devm_mdiobus_register() allocated another devres and registers a
callback that will unregister the bus.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is not documented. Add a short kerneldoc description.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Functions should only be static inline if they're very short. This
devres helper is already over 10 lines and it will grow soon as we'll
be improving upon its approach. Pull it into mdio_devres.c.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have a devres variant of mdiobus_register() but it's not listed in
devres.rst. Add it under other mdio devm functions.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make it an explicit counterpart to devm_register_netdev() just like we
do with devm_free_netdev() for better clarity.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The idea behind devres is that the release callbacks are called if
probe fails. As we now check the return value of ixgbe_mii_bus_init(),
we can drop the call devm_mdiobus_free() in error path as the release
callback will be called automatically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function may fail. Check its return value and propagate the error
code.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Find ports accessible by the VF, based on the index of the
mac address stored for the VF in the adapter. If no mac address
is stored for the VF, use the port mask provided by firmware.
Signed-off-by: Nirranjan Kirubaharan <nirranjan@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Lobakin says:

====================
net: qed/qede: license cleanup

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.

Correct already existing but wrong SPDX tags to match the actual
license.
Remove the license boilerplates and replace them with the correct
SPDX tag.
Update copyright years in all source files.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the actual copyright holder and years in all qede source files.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the actual copyright holder and years in all qed source files.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When skb is coalesced tcp_ack_tstamp() still needs to be called when not
fully acked in tcp_clean_rtx_queue(), otherwise SCM_TSTAMP_ACK
timestamps may never be fired. Since the original patch series had
dependent commits, this patch fixes the issue instead of reverting by
restoring calls to tcp_ack_tstamp() when skb is not fully acked.

Fixes: fdb7eb21 ("tcp: stamp SCM_TSTAMP_ACK later in tcp_clean_rtx_queue()")
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error return path when create_singlethread_workqueue fails currently
does not kfree tls and leads to a memory leak. Fix this by kfree'ing
tls before returning -ENOMEM.

Addresses-Coverity: ("Resource leak")
Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>