- 16 Jul, 2020 4 commits
-
-
Kamal Heib authored
Instead of returning IB_LINK_LAYER_ETHERNET from rxe_link_layer, return it directly from get_link_layer callback and remove rxe_link_layer(). Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200705104313.283034-5-kamalheib1@gmail.comSigned-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
Kamal Heib authored
The return value from rxe_mem_init_dma() is always 0 - change it to be void and fix the callers accordingly. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200705104313.283034-4-kamalheib1@gmail.comSigned-off-by:
-
Kamal Heib authored
The return value from rxe_init_port_param() is always 0 - change it to be void. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200705104313.283034-3-kamalheib1@gmail.comSigned-off-by:
-
Kamal Heib authored
Both pkey_tbl_len and gid_tbl_len are set in rxe_init_port_param() - so no need to check if they aren't set. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200705104313.283034-2-kamalheib1@gmail.comSigned-off-by:
-
- 10 Jul, 2020 4 commits
-
-
Mark Zhang authored
In manual mode allow bind user QPs with different pids to same counter, since this is allowed in auto mode. Bind kernel QPs and user QPs to the same counter are not allowed. Fixes: 1bd8e0a9 ("RDMA/counter: Allow manual mode configuration support") Link: https://lore.kernel.org/r/20200702082933.424537-4-leon@kernel.orgSigned-off-by:
Mark Zhang <markz@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Mark Zhang authored
In auto mode only bind user QPs to a dynamic counter, since this feature is mainly used for system statistic and diagnostic purpose, while there's no need to counter kernel QPs so far. Fixes: 99fa331d ("RDMA/counter: Add "auto" configuration mode support") Link: https://lore.kernel.org/r/20200702082933.424537-3-leon@kernel.orgSigned-off-by:
-
Mark Zhang authored
With the "PID" category QPs have same PID will be bound to same counter; If this category is not set then QPs have different PIDs will be bound to same counter. This is implemented for 2 reasons: 1. The counter is a limited resource, while there may be dozens of applications, each of which creates several types of QPs, which means it may doesn't have enough counter. 2. The system administrator needs all QPs created by all applications with same type bound to one counter. The counter name and PID is only make sense when "PID" category are configured. This category can also be used in combine with others, e.g. QP type. Link: https://lore.kernel.org/r/20200702082933.424537-2-leon@kernel.orgSigned-off-by:
-
Gal Pressman authored
The to_mibmr function is unused, remove it. Link: https://lore.kernel.org/r/20200705141143.47303-1-galpress@amazon.comSigned-off-by:
Gal Pressman <galpress@amazon.com> Acked-by:
-
- 07 Jul, 2020 8 commits
-
-
Leon Romanovsky authored
Merge them into their callers, usually the only thing the caller did was to call the one function, so this is clearer. Link: https://lore.kernel.org/r/20200702081809.423482-7-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Move DEVX initialization and cleanup flows to the devx.c instead of having almost empty functions in main.c Link: https://lore.kernel.org/r/20200702081809.423482-6-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Move flow steering logic to be in separate file and rename flow.c to be fs.c because it is better describe the content. Link: https://lore.kernel.org/r/20200702081809.423482-5-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
There are number of counters types supported in mlx5_ib: HW counters, congestion counters, Q-counters and flow counters. Almost all supporting code was placed in main.c that made almost impossible to maintain the code anymore. Let's create separate code namespace for the counters to easy future generalization effort. Link: https://lore.kernel.org/r/20200702081809.423482-4-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
The restrack code has separate .c, so move callbacks initialization to that file to improve code locality. Link: https://lore.kernel.org/r/20200702081809.423482-3-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
The mlx5_ib_enable_driver() is local function and doesn't need to be shared in mlx5_ib, so change it's signature to have static keyword in it. Link: https://lore.kernel.org/r/20200702081809.423482-2-leon@kernel.orgReviewed-by:
-
Xi Wang authored
If hns ROCEE is set to level-0 addressing, the length of the entire buffer can be used as the page size. The driver needn't to split the buffer into small units because all pages are continuous. Link: https://lore.kernel.org/r/1593525696-12570-1-git-send-email-liweihang@huawei.comSigned-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Zhu Yanjun authored
In the loopback tests, the following call trace occurs. Call Trace: __rxe_do_task+0x1a/0x30 [rdma_rxe] rxe_qp_destroy+0x61/0xa0 [rdma_rxe] rxe_destroy_qp+0x20/0x60 [rdma_rxe] ib_destroy_qp_user+0xcc/0x220 [ib_core] uverbs_free_qp+0x3c/0xc0 [ib_uverbs] destroy_hw_idr_uobject+0x24/0x70 [ib_uverbs] uverbs_destroy_uobject+0x43/0x1b0 [ib_uverbs] uobj_destroy+0x41/0x70 [ib_uverbs] __uobj_get_destroy+0x39/0x70 [ib_uverbs] ib_uverbs_destroy_qp+0x88/0xc0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb9/0xf0 [ib_uverbs] ib_uverbs_cmd_verbs+0xb16/0xc30 [ib_uverbs] The root cause is that the actual RDMA connection is not created in the loopback tests and the rxe_match_dgid will fail randomly. To fix this call trace which appear in the loopback tests, skip check of the dgid. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200630123605.446959-1-leon@kernel.orgSigned-off-by:
Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by:
-
- 06 Jul, 2020 18 commits
-
-
Leon Romanovsky authored
Update the code to allocate and free ib_xrcd structure in the ib_core instead of inside drivers. Link: https://lore.kernel.org/r/20200630101855.368895-4-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Move allocation and destruction of counters under ib_core responsibility Link: https://lore.kernel.org/r/20200630101855.368895-2-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Expose UAPI to query MR, this will let user space application that didn't allocate the MR but has access to by owning the matching command FD to retrieve its information. Link: https://lore.kernel.org/r/20200630093916.332097-8-leon@kernel.orgSigned-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Introduce UAPI to query PD attributes, this can be used to retrieve PD attributes by having the PD handle of the created one and owning the command FD for the ucontxet. Link: https://lore.kernel.org/r/20200630093916.332097-7-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Implement the query ucontext functionality by returning the original ucontext data as part of an extra mlx5 attribute that holds the driver UAPI response. Link: https://lore.kernel.org/r/20200630093916.332097-6-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Refactor mlx5_ib_alloc_ucontext() to set its response fields in a cleaner way. It includes, - Move the relevant code to a self contained function. - Calculate the response length once and drop redundant code all around. - Reuse previously set ucontext fields once preparing the response. The self contained function will be used in next patch as part of implementing the query ucontext functionality. Link: https://lore.kernel.org/r/20200630093916.332097-5-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Expose UAPI to query ucontext, this will let user space application that didn't allocate the ucontext but has access to by owning the matching command FD to retrieve the ucontext information. Link: https://lore.kernel.org/r/20200630093916.332097-4-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Set IOVA on IB MR in uverbs layer to let all drivers have it, this includes both reg/rereg MR flows. As part of this change cleaned-up this setting from the drivers that already did it by themselves in their user flows. Fixes: e6f03301 ("mlx4_ib: set user mr attributes in struct ib_mr") Link: https://lore.kernel.org/r/20200630093916.332097-3-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Enable CQ ioctl commands by default, this functionality is fully mature to be used over ioctl, no reason to maintain any more the EXP KCONFIG entry to enable it. Link: https://lore.kernel.org/r/20200630093916.332097-2-leon@kernel.orgSigned-off-by:
-
Maor Gottlieb authored
Replace the mutex with read write semaphore and use xarray instead of linked list for XRC target QPs. This will give faster XRC target lookup. In addition, when QP is closed, don't insert it back to the xarray if the destroy command failed. Link: https://lore.kernel.org/r/20200706122716.647338-4-leon@kernel.orgSigned-off-by:
-
Maor Gottlieb authored
ib_alloc_xrcd() already does the required initialization, so move the uverbs to call it and save code duplication, while cleaning the function argument lists of that function. Link: https://lore.kernel.org/r/20200706122716.647338-3-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
The mlx5_ib creates XRC domain and uses for creating internal SRQ. However all that is needed is XRCD number and not full blown ib_xrcd objects. Update the code to get and store the number only. Link: https://lore.kernel.org/r/20200706122716.647338-2-leon@kernel.orgSigned-off-by:
-
Gal Pressman authored
Allocating an MR flow can only be initiated by kernel users, and not from userspace so a udata parameter is redundant. Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.comSigned-off-by:
-
Gal Pressman authored
Allocating an MR flow can only be initiated by kernel users, and not from userspace. As a result, the udata parameter is always being passed as NULL. Rename ib_alloc_mr_user function to ib_alloc_mr and remove the udata parameter. Link: https://lore.kernel.org/r/20200706120343.10816-3-galpress@amazon.comSigned-off-by:
-
Gal Pressman authored
The common kernel pattern is to check for error, not success. Flip the if statement accordingly and keep the main flow unindented. Link: https://lore.kernel.org/r/20200706120343.10816-2-galpress@amazon.comSigned-off-by:
-
Chuck Lever authored
There's no need for core/trace.c to include rdma/ib_verbs.h twice. Link: https://lore.kernel.org/r/20200702141946.3775.51943.stgit@klimt.1015granger.netSigned-off-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
-
Jason Gunthorpe authored
Michael Guralnik says: ==================== This series handles IPoIB child interface creation with setting interface's HW address. In current implementation, lladdr requested by user is ignored and overwritten. Child interface gets the same GID as the parent interface and a QP number which is assigned by the underlying drivers. In this series we fix this behavior so that user's requested address is assigned to the newly created interface. As specific QP number request is not supported for all vendors, QP number requested by user will still be overwritten when this is not supported. Behavior of creation of child interfaces through the sysfs mechanism or without specifying a requested address, stays the same. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. * branch 'mlx5_ipoib_qpn': RDMA/ipoib: Handle user-supplied address when creating child net/mlx5: Enable QP number request when creating IPoIB underlay QP Signed-off-by: -
Michael Guralnik authored
Use the address supplied by user when creating a child interface. Previously, the address requested by the user was ignored and overridden with parent's GID and the random QP number assigned to the child. Link: https://lore.kernel.org/r/20200623110105.1225750-3-leon@kernel.orgSigned-off-by:
Michael Guralnik <michaelgur@mellanox.com> Reviewed-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
- 03 Jul, 2020 2 commits
-
-
Michael Guralnik authored
If in the process of creating the underlay QP for an IPoIB interface the user has set the address and specifically the 1st-3rd bytes representing the QP number, use the requested QP number when creating the underlay QP. For a user to be able to request a QP number on QP creation, the MKEY_BY_NAME NVCONFIG should be set. As mkey_by_name and qp_by_name are coupled in FW. This requires driver to query the mkey_by_name max cap during initialization and set the current cap if it was enabled in FW. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
For debugging purpose it will be easier to understand if prefetch works okay if it has its own counter. Introduce ODP prefetch counter and count per MR the total number of prefetched pages. In addition remove comment which is not relevant anymore and anyway not in the correct place. Link: https://lore.kernel.org/r/20200621104147.53795-1-leon@kernel.orgSigned-off-by:
-
- 02 Jul, 2020 2 commits
-
-
Jason Gunthorpe authored
ib_unregister_device_queued() can only be used by drivers using the new dealloc_device callback flow, and it has a safety WARN_ON to ensure drivers are using it properly. However, if unregister and register are raced there is a special destruction path that maintains the uniform error handling semantic of 'caller does ib_dealloc_device() on failure'. This requires disabling the dealloc_device callback which triggers the WARN_ON. Instead of using NULL to disable the callback use a special function pointer so the WARN_ON does not trigger. Fixes: d0899892 ("RDMA/device: Provide APIs from the core code to help unregistration") Link: https://lore.kernel.org/r/0-v1-a36d512e0a99+762-syz_dealloc_driver_jgg@nvidia.com Reported-by: syzbot+4088ed905e4ae2b0e13b@syzkaller.appspotmail.com Suggested-by:
Hillf Danton <hdanton@sina.com> Reviewed-by:
-
Jason Gunthorpe authored
ipoib_mcast_carrier_on_task() insanely open codes a rtnl_lock() such that the only time flush_workqueue() can be called is if it also clears IPOIB_FLAG_OPER_UP. Thus the flush inside ipoib_flush_ah() will deadlock if it gets unlucky enough, and lockdep doesn't help us to find it early: CPU0 CPU1 CPU2 __ipoib_ib_dev_flush() down_read(vlan_rwsem) ipoib_vlan_add() rtnl_trylock() down_write(vlan_rwsem) ipoib_mcast_carrier_on_task() while (!rtnl_trylock()) msleep(20); ipoib_flush_ah() flush_workqueue(priv->wq) Clean up the ah_reaper related functions and lifecycle to make sense: - Start/Stop of the reaper should only be done in open/stop NDOs, not in any other places - cancel and flush of the reaper should only happen in the stop NDO. cancel is only functional when combined with IPOIB_STOP_REAPER. - Non-stop places were flushing the AH's just need to flush out dead AH's synchronously and ignore the background task completely. It is fully locked and harmless to leave running. Which ultimately fixes the ABBA deadlock by removing the unnecessary flush_workqueue() from the problematic place under the vlan_rwsem. Fixes: efc82eee ("IB/ipoib: No longer use flush as a parameter") Link: https://lore.kernel.org/r/20200625174219.290842-1-kamalheib1@gmail.comReported-by:Kamal Heib <kheib@redhat.com> Tested-by:
-
- 30 Jun, 2020 1 commit
-
-
Bolarinwa Olayemi Saheed authored
pcie_speeds() and restore_pci_variables() returns PCIBIOS_ error codes from PCIe capability accessors. PCIBIOS_ error codes have positive values. Passing on these values is inconsistent with functions which return only a negative value on failure. Before passing on the return value of PCIe capability accessors, call pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to negative generic error values. Link: https://lore.kernel.org/r/20200615073225.24061-3-refactormyself@gmail.comSuggested-by:
Bjorn Helgaas <bjorn@helgaas.com> Signed-off-by:
Bolarinwa Olayemi Saheed <refactormyself@gmail.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
- 27 Jun, 2020 1 commit
-
-
Tariq Toukan authored
Add explicit WQE segment structures for the TLS static and progress params. According to the HW spec, TISN is not part of the progress params context, take it out of it. Rename the control segment tisn field as it could hold either a TIS or a TIR number. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
