- 30 Sep, 2021 40 commits
-
-
Kees Cook authored
The "card" string only holds 31 characters (and the terminating NUL). In order to avoid truncation, use a shorter card description instead of the current result, "Trident TVMaster TM5600/6000/60". Suggested-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: e28f49b0 ("V4L/DVB: tm6000: fix some info messages") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Kees Cook authored
The "card" string only holds 31 characters (and the terminating NUL). In order to avoid truncation, use a shorter card description instead of the current result, "Silicon Labs Si470x FM Radio Re". Suggested-by:
-
Kees Cook authored
The "card" string only holds 31 characters (and the terminating NUL). In order to avoid truncation, use a shorter card description instead of the current result, "Texas Instruments Wl1273 FM Rad". Suggested-by:
-
Arnd Bergmann authored
Without this, I see a randconfig link failure: aarch64-linux-ld: drivers/media/platform/rcar_drif.o: in function `rcar_drif_remove': rcar_drif.c:(.text+0x2a8): undefined reference to `v4l2_async_notifier_unregister' aarch64-linux-ld: rcar_drif.c:(.text+0x2b0): undefined reference to `v4l2_async_notifier_cleanup' aarch64-linux-ld: drivers/media/platform/rcar_drif.o: in function `rcar_drif_sdr_probe': rcar_drif.c:(.text+0x1444): undefined reference to `v4l2_async_notifier_init' aarch64-linux-ld: rcar_drif.c:(.text+0x14a0): undefined reference to `v4l2_async_notifier_register' aarch64-linux-ld: rcar_drif.c:(.text+0x14d8): undefined reference to `v4l2_async_notifier_cleanup' aarch64-linux-ld: rcar_drif.c:(.text+0x15a8): undefined reference to `__v4l2_async_notifier_add_fwnode_subdev' I could not easily figure out when this was introduced, as this code has not changed in a while but I only saw the problem recently. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Pedro Terra authored
Modify the scaler subdevice to accept setting the resolution of the source pad (previously the source resolution would always be 3 times the sink for both dimensions). Now any resolution can be set at src (even smaller ones) and the sink video will be scaled to match it. Test example: With the vimc module up (using the default vimc topology) media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]' media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]' media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]' v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700 v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81 v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \ --stream-to=test.raw The result will be a cropped stream that can be checked with the command ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \ -video_size "300x700" test.raw Co-developed-by:
Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Signed-off-by:
Gabriel Francisco Mandaji <gfmandaji@gmail.com> Signed-off-by:
Pedro Terra <pedro@terraco.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
When adding an internal scratch buffer to improve buffer handling when stopping it was also erroneously used when syncing at capture start. This led to that the first three buffers captured were always dropped as they were captured in the scratch buffer instead of in a buffer provided by the user. Allow the hardware to be given user provided buffers when preparing for capture in the stopped state. This still allows the driver to sync with the hardware and always completes the buffers to user-space in the correct order as no buffers are completed before the sync is complete. This change improves the driver as buffers are completed and given to the user three frames earlier than before. The change also fixes a warning produced by v4l2-compliance, warn: v4l2-test-buffers.cpp(448): got sequence number 3, expected 0 [hverkuil: fixed some typos in the Subject and the log message] Signed-off-by: -
Colin Ian King authored
The pointer t is being assigned a value that is never read, it is being updated later on inside the for-loop. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Signed-off-by:
-
Ondrej Jirman authored
Previously it was possible, but a recent fix for uninitialized `ret` variable broke this behavior. v4l2_fh_is_singular_file() check is there just to determine whether the power needs to be enabled, and it's not a failure if it returns false. Fixes: ba913911 ("media: sun6i-csi: add a missing return code") Signed-off-by:
Ondrej Jirman <megous@megous.com> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Martin Kepplinger authored
Some tools like v4l2-compliance let users select a media device based on the bus_info string which can be quite convenient. Use a unique string for that. This also fixes the following v4l2-compliance warning: warn: v4l2-test-media.cpp(52): empty bus_info Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by:
-
Martin Kepplinger authored
Even if model and bus_info currently both are 32 bytes large, use the correct array size for bus_info. Signed-off-by:
-
zhaoxiao authored
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by:
zhaoxiao <long870912@gmail.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Randy Dunlap authored
Fix the build errors reported by the kernel test robot by selecting V4L2_ASYNC: mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_remove': ths8200.c:(.text+0x1ec): undefined reference to `v4l2_async_unregister_subdev' mips-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_probe': ths8200.c:(.text+0x404): undefined reference to `v4l2_async_register_subdev' Fixes: ed29f894 ("media: i2c: ths8200: support asynchronous probing") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Ezequiel Garcia authored
Update the media drivers I maintain to use my personal mail address. Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Cai Huoqing authored
'linux-renesas-soc' is the mailing list for renesas SOC driver, so add it to renesas JPU driver info. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Dan Carpenter authored
This driver takes "osd_xres" and "osd_yres" as module parameters and caps the upper bounds but it doesn't cap the lower bounds. Obviously the admin is not going to enter negative resolutions but the possibility makes static analysis more difficult. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Cai Huoqing authored
Use usb_get_dev() to increment the reference count of the usb device structure in order to avoid releasing the structure while it is still in use. And use usb_put_dev() to decrement the reference count and thus, when it will be equal to 0 the structure will be released. Signed-off-by:
-
Cai Huoqing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
-
Seongyong Park authored
MLX90640 should ideally be working without a frame skip. In short, if a frame is skipped, then half of a frame loses correction information, having no way to retrieve its original compensation. This patch improves the timing in three ways: 1) Replaced schedule_timeout_interruptible() to usleep_range() The former "only ensures that it will sleep for at least schedule_delay (if not interrupted)", as pointed out by mchehab. As a result, the frame rate could lag behind than the actual capability of the hardware (Raspberry Pi would show a few Hz slower than set value) 2) Calculation based on us, not jiffies Jiffies usually has resolution of 100Hz, and possibly even cruder. MLX90640 can go up to 64Hz frame rate, which does not make sense to calculate the interval with aforementioned resolution. 3) Interval calculation based on the last frame's end time Using the start time of the current frame will probably make tiny bit of drift every time. This made more sense when I didn't realize 1), but it still makes sense without adding virtually any complexity, so this stays in. Signed-off-by:
Seongyong Park <euphoriccatface@gmail.com> Acked-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Deepak R Varma authored
Several trivial code reformatting changes done according to the coding style guidelines. These changes improves code organisation and readability and also 4 address many chackpatch error, warning and check complaints. Signed-off-by:
Deepak R Varma <drv@mailo.com> Signed-off-by:
-
Sergey Senozhatsky authored
This adds support for the new noncontiguous DMA API, which requires allocators to have two execution branches: one for the current API, and one for the new one. Signed-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Sergey Senozhatsky authored
This patch lets user-space request a non-coherent memory allocation during CREATE_BUFS and REQBUFS ioctl calls. = CREATE_BUFS struct v4l2_create_buffers has seven 4-byte reserved areas, so reserved[0] is renamed to ->flags. The struct, thus, now has six reserved 4-byte regions. = CREATE_BUFS32 struct v4l2_create_buffers32 has seven 4-byte reserved areas, so reserved[0] is renamed to ->flags. The struct, thus, now has six reserved 4-byte regions. = REQBUFS We use one byte of a 4 byte ->reserved[1] member of struct v4l2_requestbuffers. The struct, thus, now has reserved 3 bytes. Signed-off-by:
-
Sergey Senozhatsky authored
Preparations for future V4L2_MEMORY_FLAG_NON_COHERENT support. Extend the vb2_core_reqbufs() parameters list to accept requests' ->flags, which will be used for memory coherency configuration. An attempt to allocate a buffer with coherency requirements that do not match the queue's consistency model will fail. Signed-off-by:
-
Sergey Senozhatsky authored
By setting or clearing the V4L2_MEMORY_FLAG_NON_COHERENT flag user-space should be able to hint vb2 that either non-coherent (if supported) or coherent memory should be used for the buffer allocation. Signed-off-by:
-
Sergey Senozhatsky authored
This moves cache hints handling from the videobuf2 core down to the allocator's level, because allocators do the sync/flush caches eventually and may take better decisions. Besides, allocators already decide whether cache sync/flush should be done or can be skipped. This patch moves the scattered buffer cache sync logic to one common place. Signed-off-by:
-
Sergey Senozhatsky authored
V4L2 is not the perfect place to manage vb2 buffer cache hints. It works for V4L2 users, but there are backends that use vb2 core and don't use V4L2. Factor out buffer cache hints initialisation and call it when we allocate vb2 buffer. Signed-off-by:
-
Sergey Senozhatsky authored
It would be less error prone if the default cache hints value (we kzalloc() structs, so it's zeroed out by default) would be to "always sync/flush" caches. Inverse and rename cache hints flags. Signed-off-by:
-
Sergey Senozhatsky authored
With the new DMA API we need an extension of the videobuf2 API. Previously, videobuf2 core would set the non-coherent DMA bit in the vb2_queue dma_attr field (if user-space would pass a corresponding memory hint); the vb2 core then would pass the vb2_queue dma_attrs to the vb2 allocators. The vb2 allocator would use the queue's dma_attr and the DMA API would allocate either coherent or non-coherent memory. But we cannot do this anymore, since there is no corresponding DMA attr flag and, hence, there is no way for the allocator to become aware of what type of allocation user-space has requested. So we need to pass more context from videobuf2 core to the allocators. Fix this by changing the call_ptr_memop() macro to pass the vb2 pointer to the corresponding op callbacks. Signed-off-by:
-
Robert Foss authored
vfe->ops->hw_version(vfe) is being called before vfe->base has been assigned, and before the hardware has been powered up. Fixes: b10b5334528a9 ("media: camss: vfe: Don't read hardware version needlessly") Reported-by:Linux Kernel Functional Testing <lkft@linaro.org> Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Tested-by:
-
Chad Fraleigh authored
Limit frame size to what userland code expects. This can happen when cameras, such as Kensington VideoCAM, use fixed sized transfer packets which includes trailing junk in the final packet. Signed-off-by:
Chad Fraleigh <chadf@triularity.org> Signed-off-by:
-
Fabio Estevam authored
Video capture has been successfully tested using an OV5640 parallel sensor on a imx6ull-evk board at a 640x480 resolution and UYVY8_2X8 format. Remove the two items that are no longer pending. Signed-off-by:
Fabio Estevam <festevam@denx.de> Acked-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
-
Fabio Estevam authored
imx6ull-evk has a parallel OV5640 sensor. Provide an example for imx6ull-evk capture to improve the document. Signed-off-by:
-
Deborah Brouwer authored
Currently, the vivid emulation of cec message transmission does not force adapters to wait until the cec bus has been signal-free for a certain number of bit periods before transmitting or re-transmitting a message. Without enforcing the signal-free time requirements, adapters do not share the bus very well and some messages are sent too quickly while other messages are lost. By emulating a signal-free time and forcing adapters to wait their turn to transmit, the vivid emulation of cec transmission is much more reliable. Signed-off-by:
Deborah Brouwer <deborahbrouwer3563@gmail.com> Signed-off-by:
-
Ezequiel Garcia authored
The Request API is currently used and specified as part of the Memory-to-memory Stateless Video Decoder Interface [1]. This can now be considered as non-experimental and stable, given the decoder API has been used by products since a couple years, supported by several drivers and userspace frameworks, [1] Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst Signed-off-by:
-
Cai Huoqing authored
remove it because SPDX-License-Identifier is already used Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Akihiro Tsukada <tskd08@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. No memory allocation in involved in this patch, so no GFP_ tweak is needed. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Christophe JAILLET authored
A successful 'mxc_jpeg_attach_pm_domains()' call should be balanced by a corresponding 'mxc_jpeg_detach_pm_domains()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: 2db16c6e ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by:
-
Christophe JAILLET authored
A successful 'clk_prepare()' call should be balanced by a corresponding 'clk_unprepare()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: 3003a180 ("[media] VPU: mediatek: support Mediatek VPU") Signed-off-by:
Houlong Wei <houlong.wei@mediatek.com> Signed-off-by:
-
Tom Rix authored
Static analysis reports this representative problem camss-vfe-4-1.c:333: The result of the left shift is undefined because the left operand is negative reg |= (height - 1) << 4; ~~~~~~~~~ ^ The is a false positive. height is set in vfe_get_wm_sizes() which has a switch statement without a default. Reviewing the switch, the cases contain redundant assignments. So simplify to assignments. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
-
