- 14 Mar, 2016 40 commits
-
-
Alexandre Courbot authored
Make functions/structures that the GM20B driver will reuse public. Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Alexandre Courbot authored
Err on the safe side by setting the lowest frequency (and thus voltage) during device init. Signed-off-by:
-
Alexandre Courbot authored
This allows to instanciate drivers that use the same logic as gk20a with different parameters. Add a constructor function to allow other chips that inherit from this clock to easily initialize its members Signed-off-by:
-
Alexandre Courbot authored
pl_to_div may be done differently depending on the chip. Abstract this operation so the same logic can be reused for them as well. Signed-off-by:
-
Alexandre Courbot authored
This allows us to read them using one single function and will be handy to the GM20B driver. Signed-off-by:
-
Alexandre Courbot authored
Most users are probably not interested in this information. Signed-off-by:
-
Alexandre Courbot authored
Only restore the 1:1 divider if it is not set already. Also use the proper masks for this operation and add a second write as done in the Android code. Signed-off-by:
-
Alexandre Courbot authored
n_lo is used if we are going to slide. Compute it only if that condition succeeds to avoid confusion about future usage of this computation. Signed-off-by:
-
Alexandre Courbot authored
Fix the mask specified to switch to VCO mode was given as an (incorrect) immediate value. Although the side-effect happens to be the same, this is clearly incorrect. Signed-off-by:
-
Alexandre Courbot authored
gk20a_pllg_disable() is only used in the context of gk20a_clk_fini(). Move its body there and rename _gk20a_pllg_enable() and _gk20a_pllg_disable() to non-underscored versions. Signed-off-by:
-
Alexandre Courbot authored
Move some variables declarations to the scope where they are actually used to make the code easier to follow. Signed-off-by:
-
Alexandre Courbot authored
Perform computations in Khz instead of Mhz for better precision. Signed-off-by:
-
Alexandre Courbot authored
Add basic GM20B volt driver that reuses the GK20A logic. Signed-off-by:
-
Alexandre Courbot authored
Split the constructor function so we can reuse the same logic in other chips. Signed-off-by:
-
Vince Hsu authored
The CVB calculation and voltage setting functions can be reused for the future chips. So move the declaration to gk20a.h. Signed-off-by:
Vince Hsu <vinceh@nvidia.com> Signed-off-by:
-
Ben Skeggs authored
The HW accepts KeplerDmaCopyA and MaxwellDmaCopyA classes. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
This class supports a WFI method (0x0078) that's not present on the KeplerChannelGpfifoA class. The binary driver exposes both classes on these GPUs for some reason, though there doesn't appear to be any difference in the setup that's done for each (ie. even if you allocate GpfifoA, the WFI method will still work). We shall just expose GpfifoB, as I don't see a good reason to report the presence of both. Signed-off-by: -
Ben Skeggs authored
Prevents the same interrupt from re-triggering forever. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Unlike subdevs, these aren't initialised in a defined order. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by:
-
