- 28 Oct, 2022 18 commits
-
-
Corentin Labbe authored
This patch fixes some warning reported by checkpatch Reviewed-by:
John Keeping <john@metanate.com> Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Corentin Labbe authored
Use read_poll_timeout instead of open coding it. In the same time, fix indentation of related comment. Reviewed-by:
-
Corentin Labbe authored
Nobody is set as maintainer of rockchip crypto, I propose to do it as I have already reworked lot of this code. Reviewed-by:
-
Corentin Labbe authored
rk3328 does not have the same clock names than rk3288, instead of using a complex clock management, let's use clk_bulk to simplify their handling. Reviewed-by:
-
Corentin Labbe authored
reset could be handled by PM functions. We keep the initial reset pulse to be sure the hw is a know device state after probe. Signed-off-by:
-
Corentin Labbe authored
Add runtime PM support for rockchip crypto. Reviewed-by:
-
Corentin Labbe authored
This patch enable to access usage stats for each algorithm. Reviewed-by:
-
Corentin Labbe authored
Instead of using a custom type for classify algorithms, let's just use already defined ones. And let's made a bit more verbose about what is registered. Reviewed-by:
-
Corentin Labbe authored
Instead of doing manual queue management, let's use the crypto/engine for that. In the same time, rework the requests handling to be easier to understand (and fix all bugs related to them). Fixes: ce0183cb ("crypto: rockchip - switch to skcipher API") Reviewed-by:
-
Corentin Labbe authored
Now driver have fallback for un-aligned cases, remove all code handling those cases. Fixes: ce0183cb ("crypto: rockchip - switch to skcipher API") Reviewed-by:
-
Corentin Labbe authored
The key should not be set in hardware too much in advance, this will fail it 2 TFM with different keys generate alternative requests. The key should be stored and used just before doing cipher operations. Fixes: ce0183cb ("crypto: rockchip - switch to skcipher API") Reviewed-by:
-
Corentin Labbe authored
Adds a fallback for all case hardware cannot handle. Fixes: ce0183cb ("crypto: rockchip - switch to skcipher API") Reviewed-by:
-
Corentin Labbe authored
The hardware does not handle 0 size length request, let's add a fallback. Furthermore fallback will be used for all unaligned case the hardware cannot handle. Fixes: ce0183cb ("crypto: rockchip - switch to skcipher API") Reviewed-by:
-
Corentin Labbe authored
Storing the mode globally does not work if 2 requests are handled in the same time. We should store it in a request context. Fixes: ce0183cb ("crypto: rockchip - switch to skcipher API") Reviewed-by:
-
Corentin Labbe authored
This fix a simple typo on private word. Reviewed-by:
-
Corentin Labbe authored
The clock enable/disable at tfm init/exit is fragile, if 2 tfm are init in the same time and one is removed just after, it will leave the hardware uncloked even if a user remains. Instead simply enable clocks at probe time. We will do PM later. Fixes: ce0183cb ("crypto: rockchip - switch to skcipher API") Reviewed-by:
-
Corentin Labbe authored
crypto_info->dev is not yet set, so use pdev->dev instead. Reviewed-by:
-
Corentin Labbe authored
Interrupt is mandatory so the message should be printed as error. Reviewed-by:
-
- 21 Oct, 2022 22 commits
-
-
Tomas Marek authored
The stm32_rng_read() function samples TRNG by 4 bytes until at least 5 bytes are free in the input buffer. The last four bytes are never read. For example, 60 bytes are returned in case the input buffer size is 64 bytes. Read until at least 4 bytes are free in the input buffer. Fill the buffer entirely in case the buffer size is divisible by 4. Cc: Oleg Karfich <oleg.karfich@wago.com> Signed-off-by:
Tomas Marek <tomas.marek@elrest.cz> Signed-off-by:
-
Tomas Marek authored
The stm32_rng_read() function uses `retval` variable as a counter of generated random bytes. However, the same variable is used to store a result of the polling function in case the driver is waiting until the TRNG is ready. The TRNG generates random numbers by 16B. One loop read 4B. So, the function calls the polling every 16B, i.e. every 4th loop. The `retval` counter is reset on poll call and only number of bytes read after the last poll call is returned to the caller. The remaining sampled random bytes (for example 48 out of 64 in case 64 bytes are read) are not used. Use different variable to store the polling function result and do not overwrite `retval` counter. Cc: Oleg Karfich <oleg.karfich@wago.com> Signed-off-by:
-
jianchunfu authored
Use the defined variable "dev" to make the code cleaner. Signed-off-by:
jianchunfu <jianchunfu@cmss.chinamobile.com> Signed-off-by:
-
Mingming.Su authored
1. Add trng compatible name for MT7986 2. Fix mtk_rng_wait_ready() function Signed-off-by:
Mingming.Su <Mingming.Su@mediatek.com> Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Signed-off-by:
-
Corentin Labbe authored
Add missing statesize to hash templates. This is mandatory otherwise no algorithms can be registered as the core requires statesize to be set. CC: stable@kernel.org # 4.3+ Reported-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Tested-by:
-
Robert Elliott authored
When a test mode invokes multiple tests (e.g., mode 0 invokes modes 1 through 199, and mode 3 tests three block cipher modes with des), don't keep accumulating the return values with ret += tcrypt_test(), which results in a bogus value if more than one report a nonzero value (e.g., two reporting -2 (-ENOENT) end up reporting -4 (-EINTR)). Instead, keep track of the minimum return value reported by any subtest. Fixes: 4e033a6b ("crypto: tcrypt - Do not exit on success in fips mode") Signed-off-by:
Robert Elliott <elliott@hpe.com> Signed-off-by:
-
Herbert Xu authored
This fixes a number of trivial sparse warnings in ixp4xx. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Tomer Maimon authored
Adding RNG NPCM8XX support to NPCM RNG driver. RNG NPCM8XX uses a different clock prescaler. As part of adding NPCM8XX support: - Add NPCM8XX specific compatible string. - Add data to handle architecture specific clock prescaler. Signed-off-by:
Tomer Maimon <tmaimon77@gmail.com> Signed-off-by:
-
Tomer Maimon authored
Add a compatible string for Nuvoton BMC NPCM845 RNG. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Colin Ian King authored
There are a couple of spelling mistakes in dev_err messages. Fix them. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by: nicolas.toromanoff@foss.st.com Signed-off-by:
-
Mario Limonciello authored
SoCs containing 0x14CA are present both in datacenter parts that support SEV as well as client parts that support TEE. Cc: stable@vger.kernel.org # 5.15+ Tested-by:
Rijo-john Thomas <Rijo-john.Thomas@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Natalia Petrova authored
If alloc_workqueue() fails in nitrox_mbox_init() it deallocates ndev->iov.vfdev and returns error code, but then nitrox_sriov_init() calls nitrox_sriov_cleanup() where ndev->iov.vfdev is deallocated again. Fix this by nulling ndev->iov.vfdev after the first deallocation. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 9e5de3e0 ("crypto: cavium/nitrox - Add mailbox...") Signed-off-by:
Natalia Petrova <n.petrova@fintech.ru> Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Yuan Can authored
After commit bc385447("crypto: ccp - Use a single queue for proper ordering of tfm requests"), no one use struct ccp_crypto_cpu, so remove it. Signed-off-by:
Yuan Can <yuancan@huawei.com> Acked-by:
John Allen <john.allen@amd.com> Signed-off-by:
-
Corentin Labbe authored
The DMA address need to be stored in a dma_addr_t Fixes: 359e893e ("crypto: sun8i-ss - rework handling of IV") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Peter Harliman Liem authored
This is to add MaxLinear platform into compatible id. Firmware endianness option is added since MaxLinear firmware is in little endian format. Signed-off-by:
Peter Harliman Liem <pliem@maxlinear.com> Signed-off-by:
-
Peter Harliman Liem authored
This is to add fw_little_endian option, which can be used for platform which firmware is using little-endian (instead of big-endian). Signed-off-by:
-
Peter Harliman Liem authored
Currently platform data is assigned directly to version string(instead of struct). To make it more scalable, we move it to use data struct instead. This allows customization for individual platforms other than version string. Signed-off-by:
-
Gustavo A. R. Silva authored
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/216 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.htmlSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
ruanjinjie authored
Add missing __init/__exit annotations to module init/exit funcs Signed-off-by:
ruanjinjie <ruanjinjie@huawei.com> Acked-by:
-
Tianjia Zhang authored
scatterwalk_map() is an inline function already defined in the header file, it is necessary to delete the re-declaration at the same location, which was left out in the header file by an earlier modification. Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
-
Tianjia Zhang authored
The variable odata has been introduced into the function scope as a variable and should be used directly. Signed-off-by:
-
Weili Qian authored
After the device is reset, the VF needs to re-enable communication interrupt before the VF sends restart complete message to the PF. If the interrupt is re-enabled after the VF notifies the PF, the PF may fail to send messages to the VF after receiving VF's restart complete message. Fixes: 760fe22c ("crypto: hisilicon/qm - update reset flow") Signed-off-by:
Weili Qian <qianweili@huawei.com> Signed-off-by:
-
