- 05 Dec, 2022 40 commits
-
-
Josef Bacik authored
Move all the root-tree.c prototypes to root-tree.h, and then update all the necessary files to include the new header. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
This batch of prototypes no longer have code associated with them, so remove them. Signed-off-by:
-
Josef Bacik authored
These exist in delalloc-space.c, move them from ctree.h into delalloc-space.h. Signed-off-by:
-
Josef Bacik authored
Move all the extent tree related prototypes to extent-tree.h out of ctree.h, and then go include it everywhere needed so everything compiles. Signed-off-by:
-
Josef Bacik authored
This was prototyped in ctree.h and the code existed in extent-tree.c, but it's space-info related so move it into space-info.c. Signed-off-by:
-
Josef Bacik authored
These are defined already in space-info.h, remove them from ctree.h. Signed-off-by:
-
Josef Bacik authored
We've accumulated some whitespace problems in ctree.h, clean these up. Signed-off-by:
-
Josef Bacik authored
These more naturally fit in with the locking related code, and they're all defines so they can easily go anywhere, move them out of ctree.h into locking.h Signed-off-by:
-
Josef Bacik authored
Now that we have a lot of the fs_info related helpers and stuff isolated, copy these over to fs.h out of ctree.h. Signed-off-by:
-
Omar Sandoval authored
For directories with encrypted files/filenames, we need to store a flag indicating this fact. There's no room in other fields, so we'll need to borrow a bit from dir_type. Since it's now a combination of type and flags, we rename it to dir_flags to reflect its new usage. The new flag, FT_ENCRYPTED, indicates a directory containing encrypted data, which is orthogonal to file type; therefore, add the new flag, and make conversion from directory type to file type strip the flag. As the file types almost never change we can afford to use the bits. Actual usage will be guarded behind an incompat bit, this patch only adds the support for later use by fscrypt. Signed-off-by:
Omar Sandoval <osandov@osandov.com> Signed-off-by:
Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by:
-
Sweet Tea Dorminy authored
While struct qstr is more natural without fscrypt, since it's provided by dentries, struct fscrypt_str is provided by the fscrypt handlers processing dentries, and is thus more natural in the fscrypt world. Replace all of the struct qstr uses with struct fscrypt_str. Signed-off-by:
-
Sweet Tea Dorminy authored
Most places where we get a struct qstr, we are doing so from a dentry. With fscrypt, the dentry's name may be encrypted on-disk, so fscrypt provides a helper to convert a dentry name to the appropriate disk name if necessary. Convert each of the dentry name accesses to use fscrypt_setup_filename(), then convert the resulting fscrypt_name back to an unencrypted qstr. This does not work for nokey names, but the specific locations that could spawn nokey names are noted. At present, since there are no encrypted directories, nothing goes down the filename encryption paths. Signed-off-by:
-
Sweet Tea Dorminy authored
Many functions throughout btrfs take name buffer and name length arguments. Most of these functions at the highest level are usually called with these arguments extracted from a supplied dentry's name. But the entire name can be passed instead, making each function a little more elegant. Each function whose arguments are currently the name and length extracted from a dentry is herein converted to instead take a pointer to the name in the dentry. The couple of calls to these calls without a struct dentry are converted to create an appropriate qstr to pass in. Additionally, every function which is only called with a name/len extracted directly from a qstr is also converted. This change has positive effect on stack consumption, frame of many functions is reduced but this will be used in the future for fscrypt related structures. Signed-off-by:
-
Anand Jain authored
The module exit function exit_btrfs_fs() is duplicating a section of code in init_btrfs_fs(). Add a helper to remove the duplicated code. Due to the init/exit section requirements the function must be inline and not a plain static as it could cause section mismatch. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
David Sterba authored
All callers pas GFP_KERNEL as parameter so we can use it directly in alloc_scrub_sector. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
David Sterba authored
There's only one caller that calls scrub_setup_recheck_block in the memalloc_nofs_save/_restore protection so it's effectively already GFP_NOFS and it's safe to use GFP_KERNEL. Reviewed-by:
-
David Sterba authored
All callers pass GFP_NOFS, we can drop the parameter and use it directly. Reviewed-by:
-
David Sterba authored
There's only one caller that passes GFP_NOFS, we can drop the parameter an use the flags directly. Reviewed-by:
-
Josef Bacik authored
This was added while I was moving this code to its new home, it can be removed now. Reviewed-by:
-
Josef Bacik authored
This is a large patch, but because they're all macros it's impossible to split up. Simply copy all of the item accessors in ctree.h and paste them in accessors.h, and then update any files to include the header so everything compiles. Reviewed-by:
-
Josef Bacik authored
This is specific to the item-accessor code, move it out of ctree.h into accessor.h/.c and then update the users to include the new header file. This un-inlines btrfs_init_map_token, however this is only called once per function so it's not critical to be inlined. This also saves 904 bytes of code on a release build. Reviewed-by:
-
Josef Bacik authored
Rename struct-funcs.c to accessors.c so we can move the item accessors out of ctree.h. accessors.c is a better description of the code that is contained in these files. Reviewed-by:
-
Josef Bacik authored
This is fs wide information, move it out of ctree.h into fs.h. Reviewed-by:
-
Josef Bacik authored
Now that we're not using this code anywhere we can remove it as well as the member from fs_info. We don't have any mount options or on/off features that would utilize the pending infrastructure, the last one was inode_cache. There was a patchset [1] to enable some features from sysfs that would break things if it would be set immediately. In case we'll need that kind of logic again the patch can be reverted, but for the current use it can be replaced by the single state bit to do the commit. [1] https://lore.kernel.org/linux-btrfs/1422609654-19519-1-git-send-email-quwenruo@cn.fujitsu.com/Reviewed-by:
-
Josef Bacik authored
Currently we are only using fs_info->pending_changes to indicate that we need a transaction commit. The original users for this were removed years ago and we don't have more usage in sight, so this is the only remaining reason to have this field. Add a flag so we can remove this code. Reviewed-by:
-
Josef Bacik authored
These definitions are fs wide, take them out of ctree.h and put them in fs.h. Reviewed-by:
-
Josef Bacik authored
These are fs wide definitions and helpers, move them out of ctree.h and into fs.h. Reviewed-by:
-
Josef Bacik authored
These helpers use functions not defined in fs.h, they're simply accessors of the super block in fs_info, convert them to macros so that we don't have a weird dependency between fs.h and accessors.h. Signed-off-by:
-
Josef Bacik authored
We're going to use fs.h to hold fs wide related helpers and definitions, move the FS_STATE enum and related helpers to fs.h, and then update all files that need these definitions to include fs.h. Reviewed-by:
-
Josef Bacik authored
The printk index work can be pushed into the printk helpers themselves, this allows us to further sanitize messages.h, removing the last include in the header itself. Reviewed-by:
-
Josef Bacik authored
We have a bunch of printk helpers that are in ctree.h. These have nothing to do with ctree.c, so move them into their own header. Subsequent patches will cleanup the printk helpers. Reviewed-by:
-
Josef Bacik authored
These call functions that aren't defined in, or will be moved out of, ctree.h Move them to super.c where the other assert/error message code is defined. Drop the __noreturn attribute for btrfs_assertfail as objtool does not like it and fails with warnings like fs/btrfs/dir-item.o: warning: objtool: .text.unlikely: unexpected end of section fs/btrfs/xattr.o: warning: objtool: btrfs_setxattr() falls through to next function btrfs_setxattr_trans.cold() fs/btrfs/xattr.o: warning: objtool: .text.unlikely: unexpected end of section Reviewed-by:
-
Josef Bacik authored
We have several fs wide related helpers in ctree.h. The bulk of these are the incompat flag test helpers, but there are things such as btrfs_fs_closing() and the read only helpers that also aren't directly related to the ctree code. Move these into a fs.h header, which will serve as the location for file system wide related helpers. Reviewed-by:
-
Wang Yugui authored
Add a define for the data buffer size (though the maximum size is not limited by it) BTRFS_SEND_BUF_SIZE_V2 so it's more visible. Signed-off-by:
Wang Yugui <wangyugui@e16-tech.com> Reviewed-by:
-
David Sterba authored
Callers that pass non-zero generation always want to perform the generation check, we can simply encode that in one parameter and drop check_generation. Add function documentation. Reviewed-by:
-
David Sterba authored
There's a request to automatically enable async discard for capable devices. We can do that, the async mode is designed to wait for larger freed extents and is not intrusive, with limits to iops, kbps or latency. The status and tunables will be exported in /sys/fs/btrfs/FSID/discard . The automatic selection is done if there's at least one discard capable device in the filesystem (not capable devices are skipped). Mounting with any other discard option will honor that option, notably mounting with nodiscard will keep it disabled. Link: https://lore.kernel.org/linux-btrfs/CAEg-Je_b1YtdsCR0zS5XZ_SbvJgN70ezwvRwLiCZgDGLbeMB=w@mail.gmail.com/Reviewed-by:
Boris Burkov <boris@bur.io> Signed-off-by:
-
David Sterba authored
The sysfs_emit is the safe API for writing to the sysfs files, previously converted from scnprintf, there's one left to do in btrfs_read_policy_show. Reviewed-by:
-
Josef Bacik authored
We sometimes have to allocate new extent states when clearing or setting new bits in an extent io tree. Generally we preallocate this before taking the tree spin lock, but we can use this preallocated extent state sometimes and then need to try to do a GFP_ATOMIC allocation under the lock. Unfortunately sometimes this fails, and then we hit the BUG_ON() and bring the box down. This happens roughly 20 times a week in our fleet. However the vast majority of callers use GFP_NOFS, which means that if this GFP_ATOMIC allocation fails, we could simply drop the spin lock, go back and allocate a new extent state with our given gfp mask, and begin again from where we left off. For the remaining callers that do not use GFP_NOFS, they are generally using GFP_NOWAIT, which still allows for some reclaim. So allow these allocations to attempt to happen outside of the spin lock so we don't need to rely on GFP_ATOMIC allocations. This in essence creates an infinite loop for anything that isn't GFP_NOFS. To address this we may want to migrate to using mempools for extent states so that we will always have emergency reserves in order to make our allocations. Signed-off-by:
-
Josef Bacik authored
As of "btrfs: do not use GFP_ATOMIC in the read endio" we no longer have any users of unlock_extent_atomic, remove it. Signed-off-by:
-
Josef Bacik authored
We have done read endio in an async thread for a very, very long time, which makes the use of GFP_ATOMIC and unlock_extent_atomic() unneeded in our read endio path. We've noticed under heavy memory pressure in our fleet that we can fail these allocations, and then often trip a BUG_ON(!allocation), which isn't an ideal outcome. Begin to address this by simply not using GFP_ATOMIC, which will allow us to do things like actually allocate a extent state when doing set_extent_bits(UPTODATE) in the endio handler. End io handlers are not called in atomic context, besides we have been allocating failrec with GFP_NOFS so we'd notice there's a problem. Signed-off-by:
-
