[why]
Preivous algorithm for finding an optimal idle pipe for a new plane was
implemented to handle dynamic pipe allocation when MPO plane moves
from one ODM slice to the other. Now pipe allocation is more static so
it no longer depends on the MPO plane's position. We are simplifying
our logic and remove unnecessary handling in our code.

[how]
Apply a new simplified version of pipe resource allocation logic to reduce
unnecessary flip delay caused by swapping secondary dpp pipe to other
MPC blending tree.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
We only acquire MPO pipe for blending tree where the plane clip will
be rendered. If an MPO plane is outside current ODM slice rect, we will
skip pipe allocation. With new programming policy we want to allocate
pipes for every ODM slice blending tree even for those whose ODM slice
rect doesn't intersect with plane clip. This is aligned with DML validation
so the pipe topology is programmed independently from the plane's
position and dst plane size.

[how]
- Remove the logic to allocate pipe only when the MPO plane intersects
with ODM slice and replace with the new logic to always allocate pipes.
- Remove the logic to tear down ODM configuration in favor for supporting
secondary MPO planes.
- Remove the logic to use full update when MPO goes accross ODM slice
boundary.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
If plane clip is outside current pipe's ODM slice rect, our logic will
fail validation because we assume that when a pipe is acquired
to support a plane clip, it must blend some portion of the plane
on the screen. This assumption needs to be changed.
When a pipe is acquired to render the plane, we are now allowing
it to support a case where it can take minimum viewport and draw
with zero recout size when the plane clip is outside current ODM
slice rect. The reason is that we want to allocate and get the pipe
pre-programmed so it is ready to be rendered when user moves
the plane over to the current ODM slice with a fast update.
Whereas with the existing solution when user moves the plane
over, we will need to allocate a pipe as needed and power it up
and program it through a full update. This not only impacts the
user experience with unnecessary delay of a frame but also
doesn't generate any benefit to the user because DML doesn't
support it. DML will invalidate based on worst case scenario and
it doesn't depend on the plane location. So having our
programming sequence support such dynamic pipe allocation is
not meaningful anyway.

[how]
In build scaler params allow recout to be zero size and if viewport
is smaller than minimum, set minimum viewport size.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Flash of corruption observed when UCLK switching after transitioning
from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config
Scenario where DPREFCLK is required instead of DTBCLK is not expected

[How]
Always set the DTBCLK source as DTBCLK0
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Front-end would be programmed using the stream update flags set
from the previous update and the full update should be triggered
whenever commit_state_no_check gets called.

[How]
Set all stream update flags before programming the front-end
Clear all flags that got set to avoid redundant programming
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Make the mpc32 functions available for future DCNs to use
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
Currently, when insert_plane is called with insert_above_mpcc
parameter that is equal to tree->opp_list, the function returns NULL.

[HOW]
Instead, the function should insert the plane at the top of the tree.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other means to enable DPIA trace.

[How]
Reuse existing DC debug mask to enable DPIA trace log from
kernel command line. This makes debugging DPIA issues easier
especially when system power state (suspend/reboot) is involved.

To turn on DPIA trace, simply add "amdgpu.dcdebugmask=0x80" to
kernel command line.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other debug tools to enable DPIA trace.

[How]
Exposes interfaces to update trace mask from the DMUB GPINT commands.
Also provides DC implementations to enable DPIA trace.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
There was unfortunately a coding mistake. It gets caught with an ultrawide monitor
that requires ODM 4:1 combine. We are blanking or unblanking pixel data we
are supposed to enumerate through all ODM pipes and program DPG for each
of those pipes. However the coding mistake causes us to program only the
first and last ODM pipes.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MES allocates process level doorbells, but there is no userspace
client to consume it. It was only being used for the MES ring
tests (in kernel), and was written by kernel doorbell write.

The previous patch of this series has changed the MES ring test code to
use kernel level MES doorbells. This patch now cleans up the process level
doorbell allocation code which is not required.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch:
- Removes the existing doorbell management code, and its variables
  from the doorbell_init function, it will be done in doorbell
  manager now.
- uses the doorbell page created for MES kernel level needs (doorbells
  for MES self tests)
- current MES code was allocating MES doorbells in MES process context,
  but those were getting written using kernel doorbell calls. This patch
  instead allocates a MES kernel doorbell for this (in add_hw_queue).

V2: Create an extra page of doorbells for MES during kernel doorbell
    creation (Alex)
V4: Move MES doorbell size and page offset objects in this patch from
    patch 6.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch removes some variables and functions from KFD
doorbell handling code, which are no more required since
doorbell manager is handling doorbell calculations.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We should be checking to see if async flips are supported in
amdgpu_dm_atomic_check() (i.e. not dm_crtc_helper_atomic_check()). Also,
async flipping isn't supported if a plane's framebuffer changes memory
domains during an atomic commit. So, move the check from
dm_crtc_helper_atomic_check() to amdgpu_dm_atomic_check() and check if
the memory domain has changed in amdgpu_dm_atomic_check().

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2733
Fixes: c1e18c44 ("drm/amd/display: only accept async flips for fast updates")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch:
- adds a doorbell object in kfd pdd structure.
- allocates doorbells for a process while creating its queue.
- frees the doorbells with pdd destroy.
- moves doorbell bitmap init function to kfd_doorbell.c

PS: This patch ensures that we don't break the existing KFD
    functionality, but now KFD userspace library should also
    create doorbell pages as AMDGPU GEM objects using libdrm
    functions in userspace. The reference code for the same
    is available with AMDGPU Usermode queue libdrm MR. Once
    this is done, we will not need to create process doorbells
    in kernel.

V2: - Do not use doorbell wrapper API, use amdgpu_bo_create_kernel
      instead (Alex).
    - Do not use custom doorbell structure, instead use separate
      variables for bo and doorbell_bitmap (Alex)
V3:
   - Do not allocate doorbell page with PDD, delay doorbell process
     page allocation until really needed (Felix)

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felilx.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch:
- adds a doorbell bo in kfd device structure.
- creates doorbell page for kfd kernel usages.
- updates the get_kernel_doorbell and free_kernel_doorbell functions
  accordingly

V2: Do not use wrapper API, use direct amdgpu_create_kernel(Alex)
V3:
 - Move single variable declaration below (Christian)
 - Add a to-do item to reuse the KGD kernel level doorbells for
   KFD for non-MES cases, instead of reserving one page (Felix)

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Read DP_SINK_PR_PIXEL_DEVIATION_PER_LINE  and
DP_SINK_PR_MAX_NUMBER_OF_DEVIATION_LINE
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need certain conditions for replay to be enabled, so create an
interface in DM to enable/disable replay.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v1:
Enable following message in vf mode.
- PPSMC_MSG_GetMinGfxclkFreqquency
- PPSMC_MSG_GetMaxGfxclkFreqquency
- PPSMC_MSG_GetMinDpmFreq
- PPSMC_MSG_GetMaxDpmFreq

these message will cause pp_dpm_* device node not work properly.

v2:
the following message is disabled in VF mode. (since pmfw 85.69.0)
- PPSMC_MSG_EnableAllSmuFeatures
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Added missing MES firmware versions to the 'fw_version' sysfs
directory, they should now exist as a files named "mes_fw_version"
and "mes_kiq_fw_version" found at:

/sys/class/drm/cardX/device/fw_version/mes_fw_version
/sys/class/drm/cardX/device/fw_version/mes_kiq_fw_version
Where X is the card number, and the version is displayed in hexadecimal.
Signed-off-by: Ori Messinger <ori.messinger@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds a helper function which converts a doorbell's
relative index in a BO to an absolute doorbell offset in the
doorbell BAR.

V2: No space between the variable name doc (Luben)

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Energy counter should be reported in units of 15.259 uJ. Don't apply
any conversion.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch:
- creates a doorbell page for graphics driver usages.
- adds a few new varlables in adev->doorbell structure to
  keep track of kernel's doorbell-bo.
- removes the adev->doorbell.ptr variable, replaces it with
  kernel-doorbell-bo's cpu address.

V2: - Create doorbell BO directly, no wrappe functions (Alex)
    - no additional doorbell structure (Alex, Christian)
    - Use doorbell_cpu_ptr, remove ioremap (Christian, Alex)
    - Allocate one extra page of doorbells for MES (Alex)

V4: Move MES doorbell base init into MES related patch (Christian)

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Make the new ascis to follow nbio callback method to get pcie replay
count.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- fix variable ('attr') dereferenced issue.
- using condition check instead of BUG_ON().

Fixes: 4e01847c ("drm/amdgpu: optimize amdgpu device attribute code")
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add implementation to get pcie replay count for nbio v7.9.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch initialzes the ttm resource manager for doorbells.

V2: Do not round up doorbell size (Alex)

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds changes:
- to accommodate the new GEM domain for DOORBELLs
- to accommodate the new TTM PL for DOORBELLs

in order to manage doorbell pages as GEM object.

V2: Addressed reviwe comments from Christian
    - drop the doorbell changes for pinning/unpinning
    - drop the doorbell changes for dma-buf map
    - drop the doorbell changes for sgt
    - no need to handle TTM_PL_FLAG_CONTIGUOUS for doorbell
    - add caching type for doorbell

V3: - Removed unrelated empty line (Christian)
    - Add PL_DOORBELL in mem_type_to_domain() as well (Alex)

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>

SMEM instructions can reach addresses above 47 bits but require
bit 47 to be sign-extended through bits [63:48].

This allows the TMA to be relocated in a following patch.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The TBA and TMA, along with an unused IB allocation, reside at low
addresses in the VM address space. A stray VM fault which hits these
pages must be serviced by making their page table entries invalid.
The scheduler depends upon these pages being resident and fails,
preventing a debugger from inspecting the failure state.

By relocating these pages above 47 bits in the VM address space they
can only be reached when bits [63:48] are set to 1. This makes it much
less likely for a misbehaving program to generate accesses to them.
The current placement at VA (PAGE_SIZE*2) is readily hit by a NULL
access with a small offset.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some changes have been lost during rebases. Rebuild sources.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds flags for a new gem domain AMDGPU_GEM_DOMAIN_DOORBELL
in the UAPI layer.

V2: Drop 'memory' from description (Christian)

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>

This patch removes the check and change in num_kernel_doorbells
for MES, which is not being used anywhere by MES code.

V2: Fixed checkpatch warnings.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add a callback in nbio to get pcie replay count.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 5b29369b.

This patch causes IGT test case 'kms_atomic@plane-immutable-zpos' to
fail on AMDGPU hardware.

Cc: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Nicholas Choi <Nicholas.Choi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
Add new interface for notifying OS of cursor support changes
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following style issues:

ERROR: open brace '{' following function definitions go on the next line
WARNING: printk() should include KERN_<LEVEL> facility level

Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Create MST colorsapce property for downstream device would trigger
warning message "RIP: 0010:drm_mode_object_add+0x8e/0xa0 [drm]"

After driver is loaded and drm device is registered, create
dp colorspace property triggers warning storm at
WARN_ON(!dev->driver->load && dev->registered && !obj_free_cb);

Temporary disabling MST dp colorspace property for now.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Usage of container_of is wrong here.
struct acpi_device *adev = container_of(handle, struct acpi_device, handle)

This reverts commit b0bd0a92.

References: https://gitlab.freedesktop.org/drm/amd/-/issues/2744
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>