- 19 Jun, 2015 40 commits
-
-
Al Viro authored
commit 1711fd9a upstream. POLL_OUT isn't what callers of ->poll() are expecting to see; it's actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap bit... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Zefan Li <lizefan@huawei.com>
-
Johan Hovold authored
commit 79fbf4a5 upstream. Fix overflow bug in tty_wait_until_sent on 64-bit machines, where an infinite timeout (0) would be passed to the underlying tty-driver's wait_until_sent-operation as a negative timeout (-1), causing it to return immediately. This manifests itself for example as tcdrain() returning immediately, drivers not honouring the drain flags when setting terminal attributes, or even dropped data on close as a requested infinite closing-wait timeout would be ignored. The first symptom was reported by Asier LLANO who noted that tcdrain() returned prematurely when using the ftdi_sio usb-serial driver. Fix this by passing 0 rather than MAX_SCHEDULE_TIMEOUT (LONG_MAX) to the underlying tty driver. Note that the serial-core wait_until_sent-implementation is not affected by this bug due to a lucky chance (comparison to an unsigned maximum timeout), and neither is the cyclades one that had an explicit check for negative timeouts, but all other tty drivers appear to be affected. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
ZIV-Asier Llano Palacios <asier.llano@cgglobal.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Johan Hovold authored
commit 2c3fbe3c upstream. In case an infinite timeout (0) is requested, the irda wait_until_sent implementation would use a zero poll timeout rather than the default 200ms. Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Peter Hurley authored
commit 30a22c21 upstream. commit 6ae9200f ("enlarge console.name") increased the storage for the console name to 16 bytes, but not the corresponding struct console_cmdline::name storage. Console names longer than 8 bytes cause read beyond end-of-string and failure to match console; I'm not sure if there are other unexpected consequences. Signed-off-by:
-
Jiri Slaby authored
commit f0bf0bd0 upstream. This problem was taken care of three times already in * b0de59b5 (TTY: do not update atime/mtime on read/write), * 37b7f3c7 (TTY: fix atime/mtime regression), and * b0b88565 (tty: fix up atime/mtime mess, take three) But it still misses one point. As John Paul correctly points out, we do not care about setting date. If somebody ever changes wall time backwards (by mistake for example), tty timestamps are never updated until the original wall time passes. So check the absolute difference of times and if it large than "8 seconds or so", always update the time. That means we will update immediatelly when changing time. Ergo, CAP_SYS_TIME can foul the check, but it was always that way. Thanks John for serving me this so nicely debugged. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-by:
John Paul Perry <john_paul.perry@alcatel-lucent.com> Acked-by:
-
Russell King authored
commit f2e0ea86 upstream. I'm still receiving reports to my email address, so let's point this at the linux-serial mailing list instead. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Mathias Nyman authored
commit b8cb91e0 upstream. The xhci in Intel Sunrisepoint and Cherryview platforms need a driver workaround for a Stuck PME that might either block PME events in suspend, or create spurious PME events preventing runtime suspend. Workaround is to clear a internal PME flag, BIT(28) in a vendor specific PMCTRL register at offset 0x80a4, in both suspend resume callbacks Without this, xhci connected usb devices might never be able to wake up the system from suspend, or prevent device from going to suspend (xhci d3) Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Aleksander Morgado authored
commit 45ba2154 upstream. When a control transfer has a short data stage, the xHCI controller generates two transfer events: a COMP_SHORT_TX event that specifies the untransferred amount, and a COMP_SUCCESS event. But when the data stage is not short, only the COMP_SUCCESS event occurs. Therefore, xhci-hcd must set urb->actual_length to urb->transfer_buffer_length while processing the COMP_SUCCESS event, unless urb->actual_length was set already by a previous COMP_SHORT_TX event. The driver checks this by seeing whether urb->actual_length == 0, but this alone is the wrong test, as it is entirely possible for a short transfer to have an urb->actual_length = 0. This patch changes the xhci driver to rely on a new td->urb_length_set flag, which is set to true when a COMP_SHORT_TX event is received and the URB length updated at that stage. This fixes a bug which affected the HSO plugin, which relies on URBs with urb->actual_length == 0 to halt re-submitting the RX URB in the control endpoint. Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Andy Lutomirski authored
commit 956421fb upstream. 'ret_from_fork' checks TIF_IA32 to determine whether 'pt_regs' and the related state make sense for 'ret_from_sys_call'. This is entirely the wrong check. TS_COMPAT would make a little more sense, but there's really no point in keeping this optimization at all. This fixes a return to the wrong user CS if we came from int 0x80 in a 64-bit task. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/4710be56d76ef994ddf59087aad98c000fbab9a4.1424989793.git.luto@amacapital.net [ Backported from tip:x86/asm. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
commit d51199a8 upstream. DMA_BIT_MASK of 64 is not valid dma address mask for OMAPs, it should be set to 32. The 64 was introduced by commit (in 2009): a152ff24 ASoC: OMAP: Make DMA 64 aligned But the dma_mask and coherent_dma_mask can not be used to specify alignment. Fixes: a152ff24 (ASoC: OMAP: Make DMA 64 aligned) Reported-by:
Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> [lizf: Backported to 3.4: there's no dma_coerce_mask_and_coherent()] Signed-off-by:
-
Chris Wilson authored
commit 6e17cb12 upstream. i915.ko depends upon the acpi/video.ko module and so refuses to load if ACPI is disabled at runtime if for example the BIOS is broken beyond repair. acpi/video provides an optional service for i915.ko and so we should just allow the modules to load, but do no nothing in order to let the machines boot correctly. Reported-by:
Bill Augur <bill-auger@programmer.net> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
Aaron Lu <aaron.lu@intel.com> [ rjw: Fixed up the new comment in acpi_video_init() ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tommi Rantala authored
commit a28b2a47 upstream. Passing zeroed drm_radeon_cs struct to DRM_IOCTL_RADEON_CS produces the following oops. Fix by always calling INIT_LIST_HEAD() to avoid the crash in list_sort(). ---------------------------------- #include <stdint.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <drm/radeon_drm.h> static const struct drm_radeon_cs cs; int main(int argc, char **argv) { return ioctl(open(argv[1], O_RDWR), DRM_IOCTL_RADEON_CS, &cs); } ---------------------------------- [ttrantal@test2 ~]$ ./main /dev/dri/card0 [ 46.904650] BUG: unable to handle kernel NULL pointer dereference at (null) [ 46.905022] IP: [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] PGD 68f29067 PUD 688b5067 PMD 0 [ 46.905022] Oops: 0002 [#1] SMP [ 46.905022] CPU: 0 PID: 2413 Comm: main Not tainted 4.0.0-rc1+ #58 [ 46.905022] Hardware name: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v02.10 01/25/2007 [ 46.905022] task: ffff880058e2bcc0 ti: ffff880058e64000 task.ti: ffff880058e64000 [ 46.905022] RIP: 0010:[<ffffffff814d6df2>] [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP: 0018:ffff880058e67998 EFLAGS: 00010246 [ 46.905022] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 46.905022] RDX: ffffffff81644410 RSI: ffff880058e67b40 RDI: ffff880058e67a58 [ 46.905022] RBP: ffff880058e67a88 R08: 0000000000000000 R09: 0000000000000000 [ 46.905022] R10: ffff880058e2bcc0 R11: ffffffff828e6ca0 R12: ffffffff81644410 [ 46.905022] R13: ffff8800694b8018 R14: 0000000000000000 R15: ffff880058e679b0 [ 46.905022] FS: 00007fdc65a65700(0000) GS:ffff88006d600000(0000) knlGS:0000000000000000 [ 46.905022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.905022] CR2: 0000000000000000 CR3: 0000000058dd9000 CR4: 00000000000006f0 [ 46.905022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 46.905022] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 46.905022] Stack: [ 46.905022] ffff880058e67b40 ffff880058e2bcc0 ffff880058e67a78 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] Call Trace: [ 46.905022] [<ffffffff81644a65>] radeon_cs_parser_fini+0x195/0x220 [ 46.905022] [<ffffffff81645069>] radeon_cs_ioctl+0xa9/0x960 [ 46.905022] [<ffffffff815e1f7c>] drm_ioctl+0x19c/0x640 [ 46.905022] [<ffffffff810f8fdd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 46.905022] [<ffffffff810f90ad>] ? trace_hardirqs_on+0xd/0x10 [ 46.905022] [<ffffffff8160c066>] radeon_drm_ioctl+0x46/0x80 [ 46.905022] [<ffffffff81211868>] do_vfs_ioctl+0x318/0x570 [ 46.905022] [<ffffffff81462ef6>] ? selinux_file_ioctl+0x56/0x110 [ 46.905022] [<ffffffff81211b41>] SyS_ioctl+0x81/0xa0 [ 46.905022] [<ffffffff81dc6312>] system_call_fastpath+0x12/0x17 [ 46.905022] Code: 48 89 b5 10 ff ff ff 0f 84 03 01 00 00 4c 8d bd 28 ff ff ff 31 c0 48 89 fb b9 15 00 00 00 49 89 d4 4c 89 ff f3 48 ab 48 8b 46 08 <48> c7 00 00 00 00 00 48 8b 0e 48 85 c9 0f 84 7d 00 00 00 c7 85 [ 46.905022] RIP [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP <ffff880058e67998> [ 46.905022] CR2: 0000000000000000 [ 47.149253] ---[ end trace 09576b4e8b2c20b8 ]--- Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 0586915e upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit c320bb5f upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit 9d1393f2 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit 54acf107 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit f957063f upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Tyler Hicks authored
commit 6d65261a upstream. eCryptfs can't be aware of what to expect when after passing an arbitrary ioctl command through to the lower filesystem. The ioctl command may trigger an action in the lower filesystem that is incompatible with eCryptfs. One specific example is when one attempts to use the Btrfs clone ioctl command when the source file is in the Btrfs filesystem that eCryptfs is mounted on top of and the destination fd is from a new file created in the eCryptfs mount. The ioctl syscall incorrectly returns success because the command is passed down to Btrfs which thinks that it was able to do the clone operation. However, the result is an empty eCryptfs file. This patch allows the trim, {g,s}etflags, and {g,s}etversion ioctl commands through and then copies up the inode metadata from the lower inode to the eCryptfs inode to catch any changes made to the lower inode's metadata. Those five ioctl commands are mostly common across all filesystems but the whitelist may need to be further pruned in the future. https://bugzilla.kernel.org/show_bug.cgi?id=93691 https://launchpad.net/bugs/1305335Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Cc: Rocko <rockorequin@hotmail.com> Cc: Colin Ian King <colin.king@canonical.com> [lizf: Backported to 3.4: - adjust context - there's no file_inode(), so open-code it] Signed-off-by:
-
Max Mansfield authored
commit c7d373c3 upstream. This patch integrates Cyber Cortex AV boards with the existing ftdi_jtag_quirk in order to use serial port 0 with JTAG which is required by the manufacturers' software. Steps: 2 [ftdi_sio_ids.h] 1. Defined the device PID [ftdi_sio.c] 2. Added a macro declaration to the ids array, in order to enable the jtag quirk for the device. Signed-off-by:
Max Mansfield <max.m.mansfield@gmail.com> Signed-off-by:
-
Trond Myklebust authored
commit 7c0af9ff upstream. put_rpccred() can sleep. Fixes: 8f649c37 ("NFSv4: Fix the locking in nfs_inode_reclaim_delegation()") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> [lizf: Backported to 3.4: adjust context] Signed-off-by:
-
Michiel vd Garde authored
commit 675af708 upstream. These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by:
Michiel van de Garde <mgparser@gmail.com> Signed-off-by:
-
Jouni Malinen authored
commit 9c1c98a3 upstream. The current minstrel_ht rate control behavior is somewhat optimistic in trying to find optimum TX rate. While this is usually fine for normal Data frames, there are cases where a more conservative set of retry parameters would be beneficial to make the connection more robust. EAPOL frames are critical to the authentication and especially the EAPOL-Key message 4/4 (the last message in the 4-way handshake) is important to get through to the AP. If that message is lost, the only recovery mechanism in many cases is to reassociate with the AP and start from scratch. This can often be avoided by trying to send the frame with more conservative rate and/or with more link layer retries. In most cases, minstrel_ht is currently using the initial EAPOL-Key frames for probing higher rates and this results in only five link layer transmission attempts (one at high(ish) MCS and four at MCS0). While this works with most APs, it looks like there are some deployed APs that may have issues with the EAPOL frames using HT MCS immediately after association. Similarly, there may be issues in cases where the signal strength or radio environment is not good enough to be able to get frames through even at couple of MCS 0 tries. The best approach for this would likely to be to reduce the TX rate for the last rate (3rd rate parameter in the set) to a low basic rate (say, 6 Mbps on 5 GHz and 2 or 5.5 Mbps on 2.4 GHz), but doing that cleanly requires some more effort. For now, we can start with a simple one-liner that forces the minimum rate to be used for EAPOL frames similarly how the TX rate is selected for the IEEE 802.11 Management frames. This does result in a small extra latency added to the cases where the AP would be able to receive the higher rate, but taken into account how small number of EAPOL frames are used, this is likely to be insignificant. A future optimization in the minstrel_ht design can also allow this patch to be reverted to get back to the more optimized initial TX rate. It should also be noted that many drivers that do not use minstrel as the rate control algorithm are already doing similar workarounds by forcing the lowest TX rate to be used for EAPOL frames. Reported-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [lizf: Backported to 3.4: adjust the if statement] Signed-off-by:
-
Johan Hovold authored
commit ca4383a3 upstream. Add missing error handling when registering the tty device at port probe. This avoids trying to remove an uninitialised character device when the port device is removed. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <greg@kroah.com> [lizf: Backported to 3.4: - adjust context - s/goto exit_with_autopm/goto exit] Signed-off-by:
-
Johan Hovold authored
commit 07fdfc5e upstream. Fix return value in probe error path, which could end up returning success (0) on errors. This could in turn lead to use-after-free or double free (e.g. in port_remove) when the port device is removed. Fixes: c706ebdf ("USB: usb-serial: call port_probe and port_remove at the right times") Signed-off-by:
-
Mark Glover authored
commit f6950344 upstream. These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by:
Mark Glover <mark@actisense.com> [johan: edit commit message slightly ] Signed-off-by:
-
Alan Stern authored
commit f0c2b681 upstream. When a signal is delivered, the information in the siginfo structure is copied to userspace. Good security practice dicatates that the unused fields in this structure should be initialized to 0 so that random kernel stack data isn't exposed to the user. This patch adds such an initialization to the two places where usbfs raises signals. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Dave Mielke <dave@mielke.cc> Signed-off-by:
-
Mathias Nyman authored
commit 6596a926 upstream. Include the high order bit fields for Max scratchpad buffers when calculating how many scratchpad buffers are needed. I'm suprised this hasn't caused more issues, we never allocated more than 32 buffers even if xhci needed more. Either we got lucky and xhci never really used past that area, or then we got enough zeroed dma memory anyway. Should be backported as far back as possible Reported-by:
Tim Chen <tim.c.chen@linux.intel.com> Tested-by:
-
Paolo Bonzini authored
commit 4ff6f8e6 upstream. This has been broken for a long time: it broke first in 2.6.35, then was almost fixed in 2.6.36 but this one-liner slipped through the cracks. The bug shows up as an infinite loop in Windows 7 (and newer) boot on 32-bit hosts without EPT. Windows uses CMPXCHG8B to write to page tables, which causes a page fault if running without EPT; the emulator is then called from kvm_mmu_page_fault. The loop then happens if the higher 4 bytes are not 0; the common case for this is that the NX bit (bit 63) is 1. Fixes: 6550e1f1 Fixes: 16518d5aReported-by:
Erik Rull <erik.rull@rdsoftware.de> Tested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jiri Pirko authored
commit 57e59563 upstream. Currently following race is possible in team: CPU0 CPU1 team_port_del team_upper_dev_unlink priv_flags &= ~IFF_TEAM_PORT team_handle_frame team_port_get_rcu team_port_exists priv_flags & IFF_TEAM_PORT == 0 return NULL (instead of port got from rx_handler_data) netdev_rx_handler_unregister The thing is that the flag is removed before rx_handler is unregistered. If team_handle_frame is called in between, team_port_exists returns 0 and team_port_get_rcu will return NULL. So do not check the flag here. It is guaranteed by netdev_rx_handler_unregister that team_handle_frame will always see valid rx_handler_data pointer. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Fixes: 3d249d4c ("net: introduce ethernet teaming device") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
commit 78296c97 upstream. As soon as extract_icmp6_fields() returns, its local storage (automatic variables) is deallocated and can be overwritten. Lets add an additional parameter to make sure storage is valid long enough. While we are at it, adds some const qualifiers. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: b64c9256 ("tproxy: added IPv6 support to the socket match") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> [lizf: Backported to 3.4: adjust context] Signed-off-by:
-
Ryusuke Konishi authored
commit 957ed60b upstream. Each inode of nilfs2 stores a root node of a b-tree, and it turned out to have a memory overrun issue: Each b-tree node of nilfs2 stores a set of key-value pairs and the number of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as a few other "bn_*" members. Since the value of "bn_nchildren" is used for operations on the key-values within the b-tree node, it can cause memory access overrun if a large number is incorrectly set to "bn_nchildren". For instance, nilfs_btree_node_lookup() function determines the range of binary search with it, and too large "bn_nchildren" leads nilfs_btree_node_get_key() in that function to overrun. As for intermediate b-tree nodes, this is prevented by a sanity check performed when each node is read from a drive, however, no sanity check has been done for root nodes stored in inodes. This patch fixes the issue by adding missing sanity check against b-tree root nodes so that it's called when on-memory inodes are read from ifile, inode metadata file. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
commit 70372a75 upstream. When a PCM draining is performed to an empty stream that has been already in PREPARED state, the current code just ignores and leaves as it is, although the drain is supposed to set all such streams to SETUP state. This patch covers that overlooked case. Signed-off-by:
-
Nicolas Saenz Julienne authored
commit 2f97c20e upstream. The gpio_chip operations receive a pointer the gpio_chip struct which is contained in the driver's private struct, yet the container_of call in those functions point to the mfd struct defined in include/linux/mfd/tps65912.h. Signed-off-by:
Nicolas Saenz Julienne <nicolassaenzj@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Al Viro authored
commit 0a280962 upstream. X-Coverup: just ask spender Signed-off-by:
-
Al Viro authored
commit 0db59e59 upstream. As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Signed-off-by:
-
Jay Lan authored
commit 14675592 upstream. The output of KDB 'summary' command should report MemTotal, MemFree and Buffers output in kB. Current codes report in unit of pages. A define of K(x) as is defined in the code, but not used. This patch would apply the define to convert the values to kB. Please include me on Cc on replies. I do not subscribe to linux-kernel. Signed-off-by:
Jay Lan <jlan@sgi.com> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Mikulas Patocka authored
commit 22aa66a3 upstream. When the snapshot target is unloaded, snapshot_dtr() waits until pending_exceptions_count drops to zero. Then, it destroys the snapshot. Therefore, the function that decrements pending_exceptions_count should not touch the snapshot structure after the decrement. pending_complete() calls free_pending_exception(), which decrements pending_exceptions_count, and then it performs up_write(&s->lock) and it calls retry_origin_bios() which dereferences s->origin. These two memory accesses to the fields of the snapshot may touch the dm_snapshot struture after it is freed. This patch moves the call to free_pending_exception() to the end of pending_complete(), so that the snapshot will not be destroyed while pending_complete() is in progress. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 2bec1f4a upstream. The function dm_get_md finds a device mapper device with a given dev_t, increases the reference count and returns the pointer. dm_get_md calls dm_find_md, dm_find_md takes _minor_lock, finds the device, tests that the device doesn't have DMF_DELETING or DMF_FREEING flag, drops _minor_lock and returns pointer to the device. dm_get_md then calls dm_get. dm_get calls BUG if the device has the DMF_FREEING flag, otherwise it increments the reference count. There is a possible race condition - after dm_find_md exits and before dm_get is called, there are no locks held, so the device may disappear or DMF_FREEING flag may be set, which results in BUG. To fix this bug, we need to call dm_get while we hold _minor_lock. This patch renames dm_find_md to dm_get_md and changes it so that it calls dm_get while holding the lock. Signed-off-by:
-
Mitko Haralanov authored
commit 18c0b82a upstream. This changeset removes all the code that allows the driver to write to the EEPROM and update the recorded error counters and power on hours. These two stats are unused and writing them exposes a timing risk which could leave the EEPROM in a bad state preventing further normal operation of the HCA. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> [lizf: Backported to 3.4: adjust context] Signed-off-by:
-
Tony Battersby authored
commit 3b524a68 upstream. Fix SCSI generic read() incorrectly returning success after detecting an error. Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
