- 19 Apr, 2024 21 commits
-
-
Miri Korenblit authored
In case of more than 6 missed beacons on one of the links, exit EMLSR by deactivating that link. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.f9111c79cb53.Ie95ea60149a9bc4367f6b338b37c8635051351ba@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
It's dangerous to re-initialize works repeatedly, especially delayed ones that have an associated timer, and even more so if they're not necessarily canceled inbetween. This can be the case for these workers here during FW restart scenarios, so make sure to initialize it only once. While at it, also ensure it is cancelled correctly. Fixes: f6780614 ("iwlwifi: mvm: disconnect in case of bad channel switch parameters") Signed-off-by:
-
Miri Korenblit authored
There are reasons for which we need to exit EMLSR, but not to block it completely, and there are reasons for which we need to block EMLSR. For both reason types we have the enum iwl_mvm_esr_state, when the blocking reasons are stored in the `mvmvif::esr_disable_reason` bitmap. This change introduces the APIs to use in the different cases: - iwl_mvm_exit_esr - will exit from EMLSR mode. - iwl_mvm_block_esr - will update the bitmap and exit EMLSR, to be used for the blocking reasons only. - iwl_mvm_unblock_esr - will update the bitmap. To be used for the blocking reasons only. Signed-off-by:
-
Miri Korenblit authored
Replaces the current logic with a new algorithm based on the link grading introduced in a previous patch. The new selection algorithm will be invoked upon successful scan to ensure it has the necessary updated data it needs. This update delegates the selection logic as the primary link determiner in EMLSR mode, storing it in mvmvif to avoid repeated calculations, as the result may vary. Additionally, includes tests for iwl_mvm_valid_link_pair to validate link pairs for EMLSR. Signed-off-by:
-
Miri Korenblit authored
The functions that are link related, so they should be in link.c and not in mld-mac80211.c. Move them. Also move the different prototypes to the right place in mvm.h Signed-off-by:
-
Miri Korenblit authored
Currenty iwl_mvm_mld_select_links() doesn't fully check that EMLSR is allowed before selecting the 2 best links. Although it will fail in ieee80211_set_active_links(), it is preferred to avoid the redundent calculations. Signed-off-by:
-
Miri Korenblit authored
2.4 GHz/LB (low band) link can't be used in an EMLSR links pair when BT is on. But EMLSR is still allowed for a pair of links which none of them operates in LB. In the existing code, EMLSR will always be disabled if one of the usable links is in LB (and BT is on). Move this check to the code that verifies a specific pair of links, and only if one of these links operates on LB - disable EMLSR. Fixes: 10159a45 ("wifi: iwlwifi: disable eSR when BT is active") Signed-off-by:
-
Miri Korenblit authored
The function iwl_mvm_can_enter_esr() is (among others) calculating if EMLSR mode is disabled due to BT coex by calling iwl_mvm_bt_coex_calculate_esr_mode(), then stores the decision in mvmvif::esr_disable_reason. But there is no need to calculate this every time iwl_mvm_can_enter_esr is called. Fix this by calculating it once after authorization, and in iwl_mvm_can_enter_esr only check mvmvif::esr_disable_reason. Signed-off-by:
-
Miri Korenblit authored
For selecting what link(s) out of the usable ones to activate, calculate a grade for a given link. Calculation of a link grade is done as follows: 1. get the estimated throughput according to the RSSI of the link, this will be the base grade 2. get the channel load from the BSS Load Element, subtracting the load caused by us. Apply the factor on the grade. 3. puncturing factor: calculate the percentage of the punctured subchannels (out of the total subchannels). Apply this on the grade. The link grading will be used by the link selection mechanism in a later patch. Also add KUnit tests for it. Signed-off-by:
-
Mukesh Sisodiya authored
Send AP_TX_POWER_CONSTRAINTS_CMD with no local maximum transmit power constraint to FW and FW will update the TPE element with required tx power limits. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
This will maintain a bitmap of reasons for which we want to avoid enabling EMLSR. For now, we have a single reason: BT coexistence, but we will add soon more reasons. Make it a bitmap to make it easier to manage. Since we'll impact the parameters that impact the enablement / disablement of EMLSR from several places, introduce a generic function that takes into account the current state and execute the decision that must be taken. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Anjaneyulu authored
Add support for enable/disable 320 MHz for Japan and South Korea by reading WBEM (WiFi Bandwidth Enablement per MCC) variable from UEFI or ACPI and sending it to the FW. Signed-off-by:
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by:
-
Anjaneyulu authored
Add support for enablement of PPAG for - VLP for 6 GHz mode in CANADA, USA and ETSI countries. - LPI for 6 GHz mode in CANADA. - SP for 6 GHz mode in CANADA, USA and ETSI countries. Signed-off-by:
-
Anjaneyulu authored
moved lari_config handling to common place to avoid code duplication. Signed-off-by:
-
Emmanuel Grumbach authored
Signed-off-by:
-
Anjaneyulu authored
regulatory header file should not be included in API file, as API defination should be independent. Signed-off-by:
-
Johannes Berg authored
The same applies for newer devices (currently SC), so just change the condition here. Signed-off-by:
-
Benjamin Berg authored
This function is useful in other places, so move it in order to share it. Signed-off-by:
Benjamin Berg <benjamin.berg@intel.com> Reviewed-by:
-
Ilan Peer authored
Instead of setting the UID to type mapping while building the scan command, set the UID to type mapping only after the scan request command was sent successfully. This resolves a bug where in case a scan request command fails and a recovery flow is initiated, the recovery flow would indicate to mac80211 that scan is completed though it was not really started. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Reviewed-by:
Ayala Beker <ayala.beker@intel.com> Signed-off-by:
-
Miri Korenblit authored
If a link switch work was queued, and then a restart happened, the worker might be executed before the reconfig, and obviously it will fail (the HW might not respond to updates etc.) So, don't perform the switch if we are in reconfig, instead - do it at the end of the reconfig. Signed-off-by:
-
Johannes Berg authored
There's an issue in that when we disconnect from an AP due to the AP switching to an unsupported channel, we might not tell the driver about this before we try to send the deauth. If the underlying implementation has detected the quiet CSA, this may cause issues if this is the only active link. Avoid this by transmitting (and flushing) the deauth only when there's an active link available that's not affected by quiet CSA. Since this introduces link->u.mgd.csa_blocked_tx and we no longer check sdata->csa_blocked_tx for the TX itself also rename the latter to csa_blocked_queues. Fixes: 6f0107d1 ("wifi: mac80211: introduce a feature flag for quiet in CSA") Signed-off-by:
-
- 16 Apr, 2024 2 commits
-
-
Alexis Lothoré authored
wilc1000 driver currently uses SRCU API to manage vif list. There is no real reason to use SRCU API here, and it makes things slightly more complicated (we need to handle a SRCU index as well as a srcu_struct) than classical RCU. Switch SRCU APIs to RCU APIs. Signed-off-by:
Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240410-wilc_srcu_to_rcu-v1-2-a9ff5b10feaa@bootlin.com
-
Alexis Lothoré authored
In order to prepare wilc1000 driver switch from SRCU to RCU, make sure that allocators are provided with the GFP_ATOMIC flag when called in a critical read section. Signed-off-by:
-
- 10 Apr, 2024 1 commit
-
-
Colin Ian King authored
There are spelling mistakes in bphy_err() messages. Fix them. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
- 08 Apr, 2024 4 commits
-
-
Michael-CY Lee authored
Extend the flag IEEE80211_KEY_FLAG_GENERATE_MMIE to BIP-CMAC-256, BIP-GMAC-128 and BIP-GMAC-256 for the same reason and in the same way that the flag was added originally in commit a0b4496a ("mac80211: add IEEE80211_KEY_FLAG_GENERATE_MMIE to ieee80211_key_flags"). Signed-off-by:
Michael-CY Lee <michael-cy.lee@mediatek.com> Link: https://msgid.link/20240326003036.15215-1-michael-cy.lee@mediatek.comSigned-off-by:
-
Jeff Johnson authored
kernel-doc is reporting some warnings, so fix them: % scripts/kernel-doc -Wall -Werror -none include/net/mac80211.h include/net/mac80211.h:2056: warning: No description found for return value of 'wdev_to_ieee80211_vif' include/net/mac80211.h:2066: warning: No description found for return value of 'ieee80211_vif_to_wdev' include/net/mac80211.h:5603: warning: No description found for return value of 'ieee80211_beacon_cntdwn_is_complete' include/net/mac80211.h:5968: warning: No description found for return value of 'ieee80211_gtk_rekey_add' include/net/mac80211.h:6350: warning: No description found for return value of 'ieee80211_find_sta_by_link_addrs' include/net/mac80211.h:6478: warning: No description found for return value of 'ieee80211_txq_airtime_check' include/net/mac80211.h:6981: warning: No description found for return value of 'rate_control_set_rates' include/net/mac80211.h:7142: warning: No description found for return value of 'ieee80211_tx_prepare_skb' include/net/mac80211.h:7156: warning: No description found for return value of 'ieee80211_parse_tx_radiotap' include/net/mac80211.h:7277: warning: No description found for return value of 'ieee80211_tx_dequeue' include/net/mac80211.h:7292: warning: No description found for return value of 'ieee80211_tx_dequeue_ni' include/net/mac80211.h:7324: warning: No description found for return value of 'ieee80211_next_txq' include/net/mac80211.h:7405: warning: No description found for return value of 'ieee80211_txq_may_transmit' include/net/mac80211.h:7466: warning: No description found for return value of 'ieee80211_calc_rx_airtime' include/net/mac80211.h:7480: warning: No description found for return value of 'ieee80211_calc_tx_airtime' include/net/mac80211.h:7528: warning: No description found for return value of 'ieee80211_is_tx_data' include/net/mac80211.h:7562: warning: No description found for return value of 'ieee80211_set_active_links' 17 warnings as Errors Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
-
Jeff Johnson authored
While fixing kernel-doc issues it was discovered that the ieee80211_set_hw_80211_encap() prototype doesn't actually have an implementation, so remove it. Note the implementation was removed in commit 6aea26ce ("mac80211: rework tx encapsulation offload API"). Signed-off-by:
-
Jeff Johnson authored
Currently kernel-doc -Wall reports: net/mac80211/ieee80211_i.h:687: warning: missing initial short description on line: * struct mesh_table So add a short description. Reported-by:
-
- 05 Apr, 2024 5 commits
-
-
https://github.com/pkshih/rtwKalle Valo authored
rtw-next patches for v6.10 Some fixes and changes of capabilities detailed in following: rtl8xxxu: * enable MFP support rtlwifi: * some cleanups rtw88: * disable unsupported interface type of mesh point for all chips, and only support station mode for SDIO chips. rtw89: * fixes of 8852b, 8852c and 8922a
-
Krzysztof Kozlowski authored
Use module_sdio_driver() instead of open-coding it. No functional difference. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Use module_sdio_driver() instead of open-coding it. No functional difference. Signed-off-by:
-
Krzysztof Kozlowski authored
This driver's initialization functions do not perform any custom code, except printing messages. Printing messages on modules loading/unloading is discouraged because it pollutes the dmesg regardless whether user actually has this device. Core kernel code already gives tools to investigate whether module was loaded or not. Drop the printing messages which allows to replace open-coded module_sdio_driver(). Signed-off-by:
-
Krzysztof Kozlowski authored
This driver's initialization functions do not perform any custom code, except printing messages. Printing messages on modules loading/unloading is discouraged because it pollutes the dmesg regardless whether user actually has this device. Core kernel code already gives tools to investigate whether module was loaded or not. Drop the printing messages which allows to replace open-coded module_sdio_driver(). Signed-off-by:
-
- 04 Apr, 2024 7 commits
-
-
Kuan-Chung Chen authored
8922A needs to set UL MU/OFDMA power and fine tune power error tolerance for proper response to AP's trigger frame. Signed-off-by:
Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240401063818.12880-1-pkshih@realtek.com
-
Po-Hao Huang authored
When wpa_supplicant is initiated by users and not by NetworkManager, the CQM configuration might not be set. Without this setting, ICs with connection quality monitor handled by firmware won't detect connection loss. To fix this we prepare a default setting upon associated at first, then update again if any is given later. Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Preparations for improving performance Amit Cohen writes: mlxsw driver will use NAPI for event processing in a next patch set. Some additional improvements will be added later. This patch set prepares the code for NAPI usage and refactor some relevant areas. See more details in commit messages. Patch Set overview: Patches #1-#2 are preparations for patch #3 Patch #3 setups tasklets as part of queue initializtion Patch #4 removes handling of unlikely scenario Patch #5 removes unused counters Patch #6 makes style change in mlxsw_pci_eq_tasklet() Patch #7-#10 poll command interface instead of EQ0 usage Patches #11-#12 make style change and break the function mlxsw_pci_cq_tasklet() Patches #13-#14 remove functions which can be replaced by a stored value Patch #15 improves accessing to descriptor queue instance ==================== Link: https://lore.kernel.org/r/cover.1712062203.git.petrm@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Amit Cohen authored
Currently, for each completion, we check the number of descriptor queue and take it via mlxsw_pci_{sdq,rdq}_get(). This is inefficient, the DQ should be the same for all the completions in CQ, as each CQ handles only one DQ - SDQ or RDQ. This mapping is handled as part of DQ initialization via mlxsw_cmd_mbox_sw2hw_dq_cq_set(). Instead, as part of DQ initialization, set DQ pointer in the appropriate CQ structure. When we handle completions, warn in case that the DQ number that we expect is different from the number we get in the CQE. Call WARN_ON_ONCE() only after checking the value, to avoid calling this method for each completion. Signed-off-by:Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/a5b2559cd6d532c120f3194f89a1e257110318f1.1712062203.git.petrm@nvidia.comSigned-off-by:
-
Amit Cohen authored
Currently, for each interrupt we call mlxsw_pci_cq_count() to determine the number of CQs. This call makes additional two function's calls. This can be removed by storing this value as part of structure 'mlxsw_pci', as we already do for number of SDQs. Remove the function and __mlxsw_pci_queue_count() which is now not used and store the value instead. Signed-off-by:
-
Amit Cohen authored
The number of SDQs is stored as part of 'mlxsw_pci' structure. In some cases, the driver uses this value and in some cases it calls mlxsw_pci_sdq_count() to get the value. Align the code to use the stored value. This simplifies the code and makes it clearer that the value is always the same. Rename 'mlxsw_pci->num_sdq_cqs' to 'mlxsw_pci->num_sdqs' as now it is used not only in CQ context. Signed-off-by:
-
Amit Cohen authored
Completion queues are used for completions of RDQ or SDQ. Each completion queue is used for one DQ. The first CQs are used for SDQs and the rest are used for RDQs. Currently, for each CQE (completion queue element), we check 'sr' value (send/receive) to know if it is completion of RDQ or SDQ. Actually, we do not really have to check it, as according to the queue number we know if it handles completions of Rx or Tx. Break the tasklet into two - one for Rx (RDQ) and one for Tx (SDQ). Then, setup the appropriate tasklet for each queue as part of queue initialization. Use 'sr' value for unlikely case that we get completion with type that we do not expect. Call WARN_ON_ONCE() only after checking the value, to avoid calling this method for each completion. A next patch set will use NAPI to handle events, then we will have a separate poll method for Rx and Tx. This change is a preparation for NAPI usage. Signed-off-by:
-
