- 02 Dec, 2022 40 commits
-
-
Yang Yingliang authored
If platform_device_add() is not called or failed, it can not call platform_device_del() to clean up memory, it should call platform_device_put() in error case. Fixes: 26f6cb99 ("[POWERPC] fsl_soc: add support for fsl_spi") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221029111626.429971-1-yangyingliang@huawei.com
-
Michael Ellerman authored
Merge Nick's powerpc qspinlock implementation. From his cover letter: This replaces the generic queued spinlock code (like s390 does) with our own implementation. Generic PV qspinlock code is causing latency / starvation regressions on large systems that are resulting in hard lockups reported (mostly in pathoogical cases). The generic qspinlock code has a number of issues important for powerpc hardware and hypervisors that aren't easily solved without changing code that would impact other architectures. Follow s390's lead and implement our own for now. Issues for powerpc using generic qspinlocks: - The previous lock value should not be loaded with simple loads, and need not be passed around from previous loads or cmpxchg results, because powerpc uses ll/sc-style atomics which can perform more complex operations that do not require this. powerpc implementations tend to prefer loads use larx for improved coherency performance. - The queueing process should absolutely minimise the number of stores to the lock word to reduce exclusive coherency probes, important for large system scalability. The pending logic is counter productive here. - Non-atomic unlock for paravirt locks is important (atomic instructions tend to still be more expensive than x86 CPUs). - Yielding to the lock owner is important in the oversubscribed paravirt case, which requires storing the owner CPU in the lock word. - More control of lock stealing for the paravirt case is important to keep latency down on large systems. - The lock acquisition operation should always be made with a special variant of atomic instructions with the lock hint bit set, including (especially) in the queueing paths. This is more a matter of adding more arch lock helpers so not an insurmountable problem for generic code. -
Benjamin Gray authored
- malloc() does not zero the buffer, - fread() does not null-terminate it's output, - `cat /proc/sys/kernel/core_pattern | hexdump -C` shows the file is not inherently null-terminated So using string operations on the buffer is risky. Explicitly add a null character to the end to make it safer. Signed-off-by:
Benjamin Gray <bgray@linux.ibm.com> Signed-off-by:
-
Benjamin Gray authored
No need to write inline asm for mtspr/mfspr, we have macros for this in reg.h Signed-off-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Tiezhu Yang authored
The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this using "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/powerpc` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
-
Nicholas Piggin authored
This option increases the number of hash misses by limiting the number of kernel HPT entries, by keeping a per-CPU record of the last kernel HPTEs installed, and removing that from the hash table on the next hash insertion. A timer round-robins CPUs removing remaining kernel HPTEs and clearing the TLB (in the case of bare metal) to increase and slightly randomise kernel fault activity. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> [mpe: Add comment about NR_CPUS usage, fixup whitespace] Signed-off-by:
-
Nicholas Piggin authored
This is equal to STACK_FRAME_MIN_SIZE on 32-bit and 64-bit ELFv1, and no longer used in 64-bit ELFv2, so replace STACK_FRAME_OVERHEAD occurrences with STACK_FRAME_MIN_SIZE. Signed-off-by:
-
Nicholas Piggin authored
Adjust the ELFv2 interrupt and switch frames to the minimum C ABI size, plus pt_regs, plus 16 bytes for the aligned regs marker for the int frame (and the switch frame needs to match that because it uses the same regs offset as the int frame). This saves 80 bytes of kernel stack per interrupt. It's the principle of getting our accounting right that's more important than the practical saving. Signed-off-by:
-
Nicholas Piggin authored
This affects only 64-bit ELFv2 kernels, and reduces the minimum asm-created stack frame size from 112 to 32 byte on those kernels. Signed-off-by:
-
Nicholas Piggin authored
Most callers just want to validate an arbitrary kernel stack pointer, some need a particular size. Make the size case the exceptional one with an extra function. Signed-off-by:
-
Nicholas Piggin authored
Stack unwinders need LR and the back chain as a minimum. The switch stack uses regs->nip for its return pointer rather than lrsave, so that was not set in the fork frame, and neither was the back chain. This change sets those fields in the stack. With this and the previous change, a stack trace in the switch or interrupt stack goes from looking like this: Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 3 PID: 90 Comm: systemd Not tainted NIP: c000000000011060 LR: c000000000010f68 CTR: 0000000000007fff [ ... regs ... ] NIP [c000000000011060] _switch+0x160/0x17c LR [c000000000010f68] _switch+0x68/0x17c Call Trace: To this: Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries CPU: 0 PID: 93 Comm: systemd Not tainted NIP: c000000000011060 LR: c000000000010f68 CTR: 0000000000007fff [ ... regs ... ] NIP [c000000000011060] _switch+0x160/0x17c LR [c000000000010f68] _switch+0x68/0x17c Call Trace: [c000000005a93e10] [c00000000000cdbc] ret_from_fork_scv+0x0/0x54 --- interrupt: 3000 at 0x7fffa72f56d8 NIP: 00007fffa72f56d8 LR: 0000000000000000 CTR: 0000000000000000 [ ... regs ... ] NIP [00007fffa72f56d8] 0x7fffa72f56d8 LR [0000000000000000] 0x0 --- interrupt: 3000 Signed-off-by:
-
Nicholas Piggin authored
Backtraces will not recognise the fork system call interrupt without the regs marker. And regular interrupt entry from userspace creates the back chain to the user stack, so do this for the initial fork frame too, to be consistent. Signed-off-by:
-
Nicholas Piggin authored
This is open-coded in process.c, ppc32 uses a different define with the same value, and the C definition is name differently which makes it an extra indirection to grep for. Signed-off-by:
-
Nicholas Piggin authored
The user interrupt frame is a different size from the kernel frame, so give it its own name. Signed-off-by:
-
Nicholas Piggin authored
This is a count of longs from the stack pointer to the regs marker. Rename it to make it more distinct from the other byte offsets. It can be derived from the byte offset definitions just added. Signed-off-by:
-
Nicholas Piggin authored
Define a constant rather than open-code the offset for the "regs" marker. Signed-off-by:
-
Nicholas Piggin authored
This is a common offset that currently uses the overloaded STACK_FRAME_OVERHEAD constant. It's easier to read and more flexible to use a specific regs offset for this. Signed-off-by:
-
Nicholas Piggin authored
Adjust the pt_regs pointer so the interrupt frame offsets can be used to save registers. Signed-off-by:
-
Nicholas Piggin authored
This call may use the min size stack frame. The scratch space used is in the caller's parameter area frame, not this function's frame. Signed-off-by:
-
Nicholas Piggin authored
This makes it a bit clearer where the stack frame is created, and will allow easier use of some of the stack offset constants in a later change. Signed-off-by:
-
Nicholas Piggin authored
The interrupt frame detection and loads from the hypothetical pt_regs are not bounds-checked. The next-frame validation only bounds-checks STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another test for this. The user could set r1 to be equal to the address matching the first interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page due to the kernel redzone, and induce the kernel to load the marker from there. Possibly this could cause a crash at least. If the user could induce the previous page to contain a valid marker, then it might be able to direct perf to read specific memory addresses in a way that could be transmitted back to the user in the perf data. Fixes: 20002ded ("perf_counter: powerpc: Add callchain support") Signed-off-by:
-
Nicholas Piggin authored
These are now unused. Remove. Signed-off-by:
-
Nicholas Piggin authored
Provide an option to build big-endian kernels using the ELFv2 ABI. This works on GCC only for now. Clang is rumored to support this, but core build files need updating first, at least. This gives big-endian kernels useful advantages of the ELFv2 ABI, e.g., less stack usage, -mprofile-kernel support, better compatibility with eBPF tools. BE+ELFv2 is not officially supported by the GNU toolchain, but it works fine in testing and has been used by some userspace for some time (e.g., Void Linux). Tested-by:
Michal Suchánek <msuchanek@suse.de> Reviewed-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Nicholas Piggin authored
This allows asm generation for big-endian ELFv2 builds. Signed-off-by:
-
Nicholas Piggin authored
Override the generic module ELF check to provide a check for the ELF ABI version. This becomes important if we allow big-endian ELF ABI V2 builds but it doesn't hurt to check now. Signed-off-by:
-
Nicholas Piggin authored
The elf_check_arch() function is also used to test compatibility of usermode binaries. Kernel modules may have more specific requirements, for example powerpc would like to test for ABI version compatibility. Add a weak module_elf_check_arch() that defaults to true, and call it from elf_validity_check(). Signed-off-by:
Jessica Yu <jeyu@kernel.org> [np: added changelog, adjust name, rebase] Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Benjamin Gray authored
With the temp mm context support, there are CPU local variables to hold the patch address and pte. Use these in the non-temp mm path as well instead of adding a level of indirection through the text_poke_area vm_struct and pointer chasing the pte. As both paths use these fields now, there is no need to let unreferenced variables be dropped by the compiler, so it is cleaner to merge them into a single context struct. This has the additional benefit of removing a redundant CPU local pointer, as only one of cpu_patching_mm / text_poke_area is ever used, while remaining well-typed. It also groups each CPU's data into a single cacheline. Signed-off-by:
-
Christopher M. Riedl authored
x86 supports the notion of a temporary mm which restricts access to temporary PTEs to a single CPU. A temporary mm is useful for situations where a CPU needs to perform sensitive operations (such as patching a STRICT_KERNEL_RWX kernel) requiring temporary mappings without exposing said mappings to other CPUs. Another benefit is that other CPU TLBs do not need to be flushed when the temporary mm is torn down. Mappings in the temporary mm can be set in the userspace portion of the address-space. Interrupts must be disabled while the temporary mm is in use. HW breakpoints, which may have been set by userspace as watchpoints on addresses now within the temporary mm, are saved and disabled when loading the temporary mm. The HW breakpoints are restored when unloading the temporary mm. All HW breakpoints are indiscriminately disabled while the temporary mm is in use - this may include breakpoints set by perf. Use the `poking_init` init hook to prepare a temporary mm and patching address. Initialize the temporary mm using mm_alloc(). Choose a randomized patching address inside the temporary mm userspace address space. The patching address is randomized between PAGE_SIZE and DEFAULT_MAP_WINDOW-PAGE_SIZE. Bits of entropy with 64K page size on BOOK3S_64: bits of entropy = log2(DEFAULT_MAP_WINDOW_USER64 / PAGE_SIZE) PAGE_SIZE=64K, DEFAULT_MAP_WINDOW_USER64=128TB bits of entropy = log2(128TB / 64K) bits of entropy = 31 The upper limit is DEFAULT_MAP_WINDOW due to how the Book3s64 Hash MMU operates - by default the space above DEFAULT_MAP_WINDOW is not available. Currently the Hash MMU does not use a temporary mm so technically this upper limit isn't necessary; however, a larger randomization range does not further "harden" this overall approach and future work may introduce patching with a temporary mm on Hash as well. Randomization occurs only once during initialization for each CPU as it comes online. The patching page is mapped with PAGE_KERNEL to set EAA[0] for the PTE which ignores the AMR (so no need to unlock/lock KUAP) according to PowerISA v3.0b Figure 35 on Radix. Based on x86 implementation: commit 4fc19708 ("x86/alternatives: Initialize temporary mm for patching") and: commit b3fd8e83 ("x86/alternatives: Use temporary mm for text poking") From: Benjamin Gray <bgray@linux.ibm.com> Synchronisation is done according to ISA 3.1B Book 3 Chapter 13 "Synchronization Requirements for Context Alterations". Switching the mm is a change to the PID, which requires a CSI before and after the change, and a hwsync between the last instruction that performs address translation for an associated storage access. Instruction fetch is an associated storage access, but the instruction address mappings are not being changed, so it should not matter which context they use. We must still perform a hwsync to guard arbitrary prior code that may have accessed a userspace address. TLB invalidation is local and VA specific. Local because only this core used the patching mm, and VA specific because we only care that the writable mapping is purged. Leaving the other mappings intact is more efficient, especially when performing many code patches in a row (e.g., as ftrace would). Signed-off-by:
Christopher M. Riedl <cmr@bluescreens.de> Signed-off-by:
-
Nicholas Piggin authored
This adds compile-time options that allow the EH lock hint bit to be enabled or disabled, and adds some new options that may or may not help matters. To help with experimentation and tuning. Signed-off-by:
-
Nicholas Piggin authored
Finding the owner or a queued waiter on a lock with a preempted vcpu is indicative of an oversubscribed guest causing the lock to get into trouble. Provide some options to detect this situation and have new CPUs avoid queueing for a longer time (more steal iterations) to minimise the problems caused by vcpu preemption on the queue. Signed-off-by:
-
Nicholas Piggin authored
Provide an option that holds off queueing indefinitely while the lock owner is preempted. This could reduce queueing latencies for very overcommitted vcpu situations. This is disabled by default. Signed-off-by:
-
Nicholas Piggin authored
Allow for a reduction in the number of times a CPU from a different node than the owner can attempt to steal the lock before queueing. This could bias the transfer behaviour of the lock across the machine and reduce NUMA crossings. Signed-off-by:
-
Nicholas Piggin authored
Use the spin_begin/spin_cpu_relax/spin_end APIs in qspinlock, which helps to prevent threads issuing a lot of expensive priority nops which may not have much effect due to immediately executing low then medium priority. Signed-off-by:
-
Nicholas Piggin authored
This change allows trylock to steal the lock. It also allows the initial lock attempt to steal the lock rather than bailing out and going to the slow path. This gives trylock more strength: without this a continually-contended lock will never permit a trylock to succeed. With this change, the trylock has a small but non-zero chance. It also gives the lock fastpath most of the benefit of passing the reservation back through to the steal loop in the slow path without the complexity. Signed-off-by:
-
Nicholas Piggin authored
After the head of the queue acquires the lock, it releases the next waiter in the queue to become the new head. Add an option to prod the new head if its vCPU was preempted. This may only have an effect if queue waiters are yielding. Disable this option by default for now, i.e., no logical change. Signed-off-by:
-
Nicholas Piggin authored
Having all CPUs poll the lock word for the owner CPU that should be yielded to defeats most of the purpose of using MCS queueing for scalability. Yet it may be desirable for queued waiters to yield to a preempted owner. With this change, queue waiters never sample the owner CPU directly from the lock word. The queue head (which is spinning on the lock) propagates the owner CPU back to the next waiter if it finds the owner has been preempted. That waiter then propagates the owner CPU back to the next waiter, and so on. s390 addresses this problem differenty, by having queued waiters sample the lock word to find the owner at a low frequency. That has the advantage of being simpler, the advantage of propagation is that the lock word never has to be accesed by queued waiters, and the transfer of cache lines to transmit the owner data is only required when lock holder vCPU preemption occurs. Signed-off-by:
-
Nicholas Piggin authored
If the head of queue is preventing stealing but it finds the owner vCPU is preempted, it will yield its cycles to the owner which could cause it to become preempted. Add an option to re-allow stealers before yielding, and disallow them again after returning from the yield. Disable this option by default for now, i.e., no logical change. Signed-off-by:
-
Nicholas Piggin authored
Queued waiters which are not at the head of the queue don't spin on the lock word but their qnode lock word, waiting for the previous queued CPU to release them. Add an option which allows these waiters to yield to the previous CPU if its vCPU is preempted. Signed-off-by:
-
Nicholas Piggin authored
Waiters spinning on the lock word should yield to the lock owner if the vCPU is preempted. This improves performance when the hypervisor has oversubscribed physical CPUs. Signed-off-by:
-
Nicholas Piggin authored
Store the owner CPU number in the lock word so it may be yielded to, as powerpc's paravirtualised simple spinlocks do. Signed-off-by:
-
