- 26 Jun, 2024 26 commits
-
-
Christian Marangi authored
LED driver based on lp55xx have all a very similar implementation for load_engine function. Move the function to lp55xx-common and rework the define to be more dynamic instead of having to declare a temp array for them. Engine mask are the same for every LED based on lp55xx. Suggested-by:
Lee Jones <lee@kernel.org> Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20240626160027.19703-6-ansuelsmth@gmail.comSigned-off-by:
-
Christian Marangi authored
Now that stop_all_engine is generalized, probe and remove function are the same across every lp55xx based LED driver and can be generalized. To permit to use a common probe, make use of the OF match_data and i2c driver_data value to store the device_config struct specific for the LED. Also drop the now unused exported symbol in lp55xx-common and make them static. Update any lp55xx based LED driver to use the new generic probe/remove. Suggested-by:
-
Christian Marangi authored
In all the lp55xx based driver, we have a similar implementation of the stop_all_engine function with the only difference of the required sleep for the OP MODE change. The main difference is legacy LEDs require a min of 152 us while new one use a generic 1-2ms. The new one use a 1-2ms sleep as suggested in the datasheet IN ALTERNATIVE to a much more robust approach by using the newly introduced ENGINE_BUSY bit in the STATUS reg. To better handle sleep after OP MODE change, add support for polling the ENGINE_BUSY bit and use the legacy sleep for old LEDs. With this change, stop_all_engine can be generalized and moved to lp55xx-common. To make more clear the double usage of lp55xx_reg, define a union for additional scope of mask and shift. Update all lp55xx based driver to use the new generalized function and define the required bits in the device_config struct. Suggested-by:
-
Christian Marangi authored
Add new ti,lp5569 compatible, this is similar to national,lp5523 with slight change to reg order and reg type and advanced way for LED fault. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240626160027.19703-3-ansuelsmth@gmail.comSigned-off-by:
-
Christian Marangi authored
pwr-sel property is specific to ti,lp8501, make it conditional of the related compatible. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240626160027.19703-2-ansuelsmth@gmail.comSigned-off-by:
-
André Apitzsch authored
The SY7802 is a current-regulated charge pump which can regulate two current levels for Flash and Torch modes. It is a high-current synchronous boost converter with 2-channel high side current sources. Each channel is able to deliver 900mA current. Acked-by:
André Apitzsch <git@apitzsch.eu> Link: https://lore.kernel.org/r/20240624-sy7802-v5-2-7abc9d96bfa6@apitzsch.euSigned-off-by:
-
André Apitzsch authored
Document Silergy SY7802 flash LED driver devicetree bindings. Reviewed-by:
-
Bastien Curutchet authored
Default blinking period is set to 2s. This is too long to be handled by the hardware (maximum is 1.69s). Set the default blinking period to 1s to match what is done in the other LED drivers. Signed-off-by:
Bastien Curutchet <bastien.curutchet@bootlin.com> Link: https://lore.kernel.org/r/20240617143910.154546-5-bastien.curutchet@bootlin.comSigned-off-by:
-
Bastien Curutchet authored
When a LED is used to drive a beeper, it uses PWM1. This can cause conflicts if an other LED want to use PWM1 for blinking. Disable use of hardware for blinking when one or more LEDs are used to drive beepers. Signed-off-by:
-
Bastien Curutchet authored
PSC0/PWM0 are used by all LEDs for brightness and blinking. This causes conflicts when you set a brightness of a new LED while an other one is already using PWM0 for blinking. Use PSC1/PWM1 for blinking. Check that no other LED is already blinking with a different PSC1/PWM1 configuration to avoid conflict. Signed-off-by:
-
Bastien Curutchet authored
Two tables are used to configure the PWM and PSC registers of the two PWM available in the pca9532. Magic numbers are used to access this table instead of defines. Add defines PCA9532_PWM_ID_0 and PCA9532_PWM_ID_1 and use them in place of these magic numbers. Signed-off-by:
-
Hans de Goede authored
The input subsystem registers LEDs with default triggers while holding the input_lock and input_register_handler() takes the input_lock this means that a triggers activate method cannot directly call input_register_handler() as the old ledtrig-input-events code is doing. The initial implementation of the input-events trigger mainly did not use the simple LED trigger mechanism because that mechanism had an issue with the initial state of a newly activated LED not matching the last led_trigger_event() call for the trigger. This issue has been fixed in commit 822c91e7 ("leds: trigger: Store brightness set by led_trigger_event()"). Rewrite the "input-events" trigger to use the simple LED trigger mechanism, registering a single input_handler at module_init() time and using led_trigger_event() to set the brightness for all LEDs controlled by this trigger. Compared to the old code this looses the ability for the user to configure a different brightness for the on state then LED_FULL, this is standard for simple LED triggers and since this trigger is only in for-leds-next ATM losing that functionality is not a regression. This also changes the configurability of the LED off timeout from a per LED setting to a global setting (runtime modifiable module-parameter). Switching to registering a single input_handler at module_init() time fixes the following locking issue reported by lockdep: [ 2840.220145] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd [ 2840.307172] usb 1-1.3: New USB device found, idVendor=0603, idProduct=0002, bcdDevice= 2.21 [ 2840.307375] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2840.307423] usb 1-1.3: Product: USB Composite Device [ 2840.307456] usb 1-1.3: Manufacturer: SINO WEALTH [ 2840.333985] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0603:0002.0007/input/input19 [ 2840.386545] ====================================================== [ 2840.386549] WARNING: possible circular locking dependency detected [ 2840.386554] 6.10.0-rc1+ #97 Tainted: G C E [ 2840.386558] ------------------------------------------------------ [ 2840.386562] kworker/1:1/52 is trying to acquire lock: [ 2840.386566] ffff98fcf1629300 (&led_cdev->led_access){+.+.}-{3:3}, at: led_classdev_register_ext+0x1c6/0x380 [ 2840.386590] but task is already holding lock: [ 2840.386593] ffffffff88130cc8 (input_mutex){+.+.}-{3:3}, at: input_register_device.cold+0x47/0x150 [ 2840.386608] which lock already depends on the new lock. [ 2840.386611] the existing dependency chain (in reverse order) is: [ 2840.386615] -> #3 (input_mutex){+.+.}-{3:3}: [ 2840.386624] __mutex_lock+0x8c/0xc10 [ 2840.386634] input_register_handler+0x1c/0xf0 [ 2840.386641] 0xffffffffc142c437 [ 2840.386655] led_trigger_set+0x1e1/0x2e0 [ 2840.386661] led_trigger_register+0x170/0x1b0 [ 2840.386666] do_one_initcall+0x5e/0x3a0 [ 2840.386675] do_init_module+0x60/0x220 [ 2840.386683] __do_sys_init_module+0x15f/0x190 [ 2840.386689] do_syscall_64+0x93/0x180 [ 2840.386696] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2840.386705] -> #2 (&led_cdev->trigger_lock){+.+.}-{3:3}: [ 2840.386714] down_write+0x3b/0xd0 [ 2840.386720] led_trigger_register+0x12c/0x1b0 [ 2840.386725] rfkill_register+0xec/0x340 [rfkill] [ 2840.386739] wiphy_register+0x82a/0x930 [cfg80211] [ 2840.386907] brcmf_cfg80211_attach+0xcbd/0x1430 [brcmfmac] [ 2840.386952] brcmf_attach+0x1ba/0x4c0 [brcmfmac] [ 2840.386991] brcmf_pcie_setup+0x899/0xc70 [brcmfmac] [ 2840.387030] brcmf_fw_request_done+0x13b/0x180 [brcmfmac] [ 2840.387070] request_firmware_work_func+0x3b/0x70 [ 2840.387078] process_one_work+0x21a/0x590 [ 2840.387085] worker_thread+0x1d1/0x3e0 [ 2840.387090] kthread+0xee/0x120 [ 2840.387096] ret_from_fork+0x30/0x50 [ 2840.387105] ret_from_fork_asm+0x1a/0x30 [ 2840.387112] -> #1 (leds_list_lock){++++}-{3:3}: [ 2840.387123] down_write+0x3b/0xd0 [ 2840.387129] led_classdev_register_ext+0x29e/0x380 [ 2840.387134] 0xffffffffc0e6b74c [ 2840.387143] platform_probe+0x40/0xa0 [ 2840.387151] really_probe+0xde/0x340 [ 2840.387157] __driver_probe_device+0x78/0x110 [ 2840.387162] driver_probe_device+0x1f/0xa0 [ 2840.387168] __driver_attach+0xba/0x1c0 [ 2840.387173] bus_for_each_dev+0x6b/0xb0 [ 2840.387180] bus_add_driver+0x111/0x1f0 [ 2840.387185] driver_register+0x6e/0xc0 [ 2840.387191] do_one_initcall+0x5e/0x3a0 [ 2840.387197] do_init_module+0x60/0x220 [ 2840.387204] __do_sys_init_module+0x15f/0x190 [ 2840.387210] do_syscall_64+0x93/0x180 [ 2840.387217] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2840.387224] -> #0 (&led_cdev->led_access){+.+.}-{3:3}: [ 2840.387233] __lock_acquire+0x11c6/0x1f20 [ 2840.387239] lock_acquire+0xc8/0x2b0 [ 2840.387244] __mutex_lock+0x8c/0xc10 [ 2840.387251] led_classdev_register_ext+0x1c6/0x380 [ 2840.387256] input_leds_connect+0x139/0x260 [ 2840.387262] input_attach_handler.isra.0+0x75/0x90 [ 2840.387268] input_register_device.cold+0xa1/0x150 [ 2840.387274] hidinput_connect+0x848/0xb00 [ 2840.387280] hid_connect+0x567/0x5a0 [ 2840.387288] hid_hw_start+0x3f/0x60 [ 2840.387294] hid_device_probe+0x10d/0x190 [ 2840.387298] really_probe+0xde/0x340 [ 2840.387304] __driver_probe_device+0x78/0x110 [ 2840.387309] driver_probe_device+0x1f/0xa0 [ 2840.387314] __device_attach_driver+0x85/0x110 [ 2840.387320] bus_for_each_drv+0x78/0xc0 [ 2840.387326] __device_attach+0xb0/0x1b0 [ 2840.387332] bus_probe_device+0x94/0xb0 [ 2840.387337] device_add+0x64a/0x860 [ 2840.387343] hid_add_device+0xe5/0x240 [ 2840.387349] usbhid_probe+0x4bb/0x600 [ 2840.387356] usb_probe_interface+0xea/0x2b0 [ 2840.387363] really_probe+0xde/0x340 [ 2840.387368] __driver_probe_device+0x78/0x110 [ 2840.387373] driver_probe_device+0x1f/0xa0 [ 2840.387378] __device_attach_driver+0x85/0x110 [ 2840.387383] bus_for_each_drv+0x78/0xc0 [ 2840.387390] __device_attach+0xb0/0x1b0 [ 2840.387395] bus_probe_device+0x94/0xb0 [ 2840.387400] device_add+0x64a/0x860 [ 2840.387405] usb_set_configuration+0x5e8/0x880 [ 2840.387411] usb_generic_driver_probe+0x3e/0x60 [ 2840.387418] usb_probe_device+0x3d/0x120 [ 2840.387423] really_probe+0xde/0x340 [ 2840.387428] __driver_probe_device+0x78/0x110 [ 2840.387434] driver_probe_device+0x1f/0xa0 [ 2840.387439] __device_attach_driver+0x85/0x110 [ 2840.387444] bus_for_each_drv+0x78/0xc0 [ 2840.387451] __device_attach+0xb0/0x1b0 [ 2840.387456] bus_probe_device+0x94/0xb0 [ 2840.387461] device_add+0x64a/0x860 [ 2840.387466] usb_new_device.cold+0x141/0x38f [ 2840.387473] hub_event+0x1166/0x1980 [ 2840.387479] process_one_work+0x21a/0x590 [ 2840.387484] worker_thread+0x1d1/0x3e0 [ 2840.387488] kthread+0xee/0x120 [ 2840.387493] ret_from_fork+0x30/0x50 [ 2840.387500] ret_from_fork_asm+0x1a/0x30 [ 2840.387506] other info that might help us debug this: [ 2840.387509] Chain exists of: &led_cdev->led_access --> &led_cdev->trigger_lock --> input_mutex [ 2840.387520] Possible unsafe locking scenario: [ 2840.387523] CPU0 CPU1 [ 2840.387526] ---- ---- [ 2840.387529] lock(input_mutex); [ 2840.387534] lock(&led_cdev->trigger_lock); [ 2840.387540] lock(input_mutex); [ 2840.387545] lock(&led_cdev->led_access); [ 2840.387550] *** DEADLOCK *** [ 2840.387552] 7 locks held by kworker/1:1/52: [ 2840.387557] #0: ffff98fcc1d07148 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: process_one_work+0x4af/0x590 [ 2840.387570] #1: ffffb67e00213e60 ((work_completion)(&hub->events)){+.+.}-{0:0}, at: process_one_work+0x1d5/0x590 [ 2840.387583] #2: ffff98fcc6582190 (&dev->mutex){....}-{3:3}, at: hub_event+0x57/0x1980 [ 2840.387596] #3: ffff98fccb3c6990 (&dev->mutex){....}-{3:3}, at: __device_attach+0x26/0x1b0 [ 2840.387610] #4: ffff98fcc5260960 (&dev->mutex){....}-{3:3}, at: __device_attach+0x26/0x1b0 [ 2840.387622] #5: ffff98fce3999a20 (&dev->mutex){....}-{3:3}, at: __device_attach+0x26/0x1b0 [ 2840.387635] #6: ffffffff88130cc8 (input_mutex){+.+.}-{3:3}, at: input_register_device.cold+0x47/0x150 [ 2840.387649] stack backtrace: [ 2840.387653] CPU: 1 PID: 52 Comm: kworker/1:1 Tainted: G C E 6.10.0-rc1+ #97 [ 2840.387659] Hardware name: Xiaomi Inc Mipad2/Mipad, BIOS MIPad-P4.X64.0043.R03.1603071414 03/07/2016 [ 2840.387665] Workqueue: usb_hub_wq hub_event [ 2840.387674] Call Trace: [ 2840.387681] <TASK> [ 2840.387689] dump_stack_lvl+0x68/0x90 [ 2840.387700] check_noncircular+0x10d/0x120 [ 2840.387710] ? register_lock_class+0x38/0x480 [ 2840.387717] ? check_noncircular+0x74/0x120 [ 2840.387727] __lock_acquire+0x11c6/0x1f20 [ 2840.387736] lock_acquire+0xc8/0x2b0 [ 2840.387743] ? led_classdev_register_ext+0x1c6/0x380 [ 2840.387753] __mutex_lock+0x8c/0xc10 [ 2840.387760] ? led_classdev_register_ext+0x1c6/0x380 [ 2840.387766] ? _raw_spin_unlock_irqrestore+0x35/0x60 [ 2840.387773] ? klist_next+0x158/0x160 [ 2840.387781] ? led_classdev_register_ext+0x1c6/0x380 [ 2840.387787] ? lockdep_init_map_type+0x58/0x250 [ 2840.387796] ? led_classdev_register_ext+0x1c6/0x380 [ 2840.387802] led_classdev_register_ext+0x1c6/0x380 [ 2840.387810] ? kvasprintf+0x70/0xb0 [ 2840.387820] ? kasprintf+0x3e/0x50 [ 2840.387829] input_leds_connect+0x139/0x260 [ 2840.387838] input_attach_handler.isra.0+0x75/0x90 [ 2840.387846] input_register_device.cold+0xa1/0x150 [ 2840.387854] hidinput_connect+0x848/0xb00 [ 2840.387862] ? usbhid_start+0x45b/0x7b0 [ 2840.387870] hid_connect+0x567/0x5a0 [ 2840.387878] ? __mutex_unlock_slowpath+0x2d/0x260 [ 2840.387891] hid_hw_start+0x3f/0x60 [ 2840.387899] hid_device_probe+0x10d/0x190 [ 2840.387906] ? __pfx___device_attach_driver+0x10/0x10 [ 2840.387913] really_probe+0xde/0x340 [ 2840.387919] ? pm_runtime_barrier+0x50/0x90 [ 2840.387927] __driver_probe_device+0x78/0x110 [ 2840.387934] driver_probe_device+0x1f/0xa0 [ 2840.387941] __device_attach_driver+0x85/0x110 [ 2840.387949] bus_for_each_drv+0x78/0xc0 [ 2840.387959] __device_attach+0xb0/0x1b0 [ 2840.387967] bus_probe_device+0x94/0xb0 [ 2840.387974] device_add+0x64a/0x860 [ 2840.387982] ? __debugfs_create_file+0x14a/0x1c0 [ 2840.387993] hid_add_device+0xe5/0x240 [ 2840.388002] usbhid_probe+0x4bb/0x600 [ 2840.388013] usb_probe_interface+0xea/0x2b0 [ 2840.388021] ? __pfx___device_attach_driver+0x10/0x10 [ 2840.388028] really_probe+0xde/0x340 [ 2840.388034] ? pm_runtime_barrier+0x50/0x90 [ 2840.388040] __driver_probe_device+0x78/0x110 [ 2840.388048] driver_probe_device+0x1f/0xa0 [ 2840.388055] __device_attach_driver+0x85/0x110 [ 2840.388062] bus_for_each_drv+0x78/0xc0 [ 2840.388071] __device_attach+0xb0/0x1b0 [ 2840.388079] bus_probe_device+0x94/0xb0 [ 2840.388086] device_add+0x64a/0x860 [ 2840.388094] ? __mutex_unlock_slowpath+0x2d/0x260 [ 2840.388103] usb_set_configuration+0x5e8/0x880 [ 2840.388114] ? __pfx___device_attach_driver+0x10/0x10 [ 2840.388121] usb_generic_driver_probe+0x3e/0x60 [ 2840.388129] usb_probe_device+0x3d/0x120 [ 2840.388137] really_probe+0xde/0x340 [ 2840.388142] ? pm_runtime_barrier+0x50/0x90 [ 2840.388149] __driver_probe_device+0x78/0x110 [ 2840.388156] driver_probe_device+0x1f/0xa0 [ 2840.388163] __device_attach_driver+0x85/0x110 [ 2840.388171] bus_for_each_drv+0x78/0xc0 [ 2840.388180] __device_attach+0xb0/0x1b0 [ 2840.388188] bus_probe_device+0x94/0xb0 [ 2840.388195] device_add+0x64a/0x860 [ 2840.388202] ? lockdep_hardirqs_on+0x78/0x100 [ 2840.388210] ? _raw_spin_unlock_irqrestore+0x35/0x60 [ 2840.388219] usb_new_device.cold+0x141/0x38f [ 2840.388227] hub_event+0x1166/0x1980 [ 2840.388242] process_one_work+0x21a/0x590 [ 2840.388249] ? move_linked_works+0x70/0xa0 [ 2840.388260] worker_thread+0x1d1/0x3e0 [ 2840.388268] ? __pfx_worker_thread+0x10/0x10 [ 2840.388273] kthread+0xee/0x120 [ 2840.388279] ? __pfx_kthread+0x10/0x10 [ 2840.388287] ret_from_fork+0x30/0x50 [ 2840.388294] ? __pfx_kthread+0x10/0x10 [ 2840.388301] ret_from_fork_asm+0x1a/0x30 [ 2840.388315] </TASK> [ 2840.415630] hid-generic 0003:0603:0002.0007: input,hidraw6: USB HID v1.10 Keyboard [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-1.3/input0 Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240602160203.27339-2-hdegoede@redhat.comSigned-off-by:
-
MarileneGarcia authored
Use __free for device_node values, and thus drop calls to of_node_put. The variable attribute __free adds a scope based cleanup to the device node. The goal is to reduce memory management issues in the kernel code. The of_node_put calls were removed, and the for_each_available_child_of_node was replaced to the equivalent for_each_available_child_of_node_scoped which use the __free. Suggested-by:
Julia Lawall <julia.lawall@inria.fr> Signed-off-by:
MarileneGarcia <marilene.agarcia@gmail.com> Link: https://lore.kernel.org/r/20240601031713.1307859-1-marilene.agarcia@gmail.comSigned-off-by:
-
Lee Jones authored
Pavel's repo hasn't been used actively for quite some time. Let's make it official. Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: -
Javier Carrasco authored
The fwnode_for_each_child_node() loop requires manual intervention to decrement the child refcount in case of an early return. Add the missing calls to fwnode_handle_put(child) to avoid memory leaks in the error paths. Cc: stable@vger.kernel.org Fixes: 679f8652 ("leds: Add mt6360 driver") Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Link: https://lore.kernel.org/r/20240611-leds-mt6360-memleak-v1-1-93642eb5011e@gmail.comSigned-off-by:
-
Marilene A Garcia authored
Use __free() for device_node values, and thus drop calls to of_node_put(). The variable attribute __free() adds a scope based cleanup to the device node. The goal is to reduce memory management issues in the kernel code. The for_each_available_child_of_node() was replaced to the equivalent for_each_available_child_of_node_scoped() which uses the __free(). Suggested-by:
-
Anjelique Melendez authored
Currently, all LED LPG devices will call lpg_{set,clear}_pbs_trigger() when setting brightness regardless of if they support PPG and have PBS triggers. Check if device supports PPG before setting/clearing PBS triggers. Fixes: 6ab1f766 ("leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM") Fixes: 5e9ff626 ("leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT SDAM") Signed-off-by:Anjelique Melendez <quic_amelende@quicinc.com> Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20240607005250.4047135-1-quic_amelende@quicinc.comSigned-off-by:
-
Thomas Weißschuh authored
The race fixed in timer_trig_activate() between a blocking set_brightness() call and trigger->activate() can affect any trigger. So move the call to flush_work() into led_trigger_set() where it can avoid the race for all triggers. Fixes: 0db37915 ("leds: avoid races with workqueue") Fixes: 8c0f693c ("leds: avoid flush_work in atomic context") Cc: stable@vger.kernel.org Tested-by:
Dustin L. Howett <dustin@howett.net> Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20240613-led-trigger-flush-v2-1-f4f970799d77@weissschuh.netSigned-off-by:
-
Andy Shevchenko authored
There is no code that uses ID table directly, except the struct device_driver at the end of the file. Hence, move table closer to its user. It's always possible to access them via a pointer. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240606173037.3091598-7-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead. Signed-off-by:
-
Andy Shevchenko authored
We have a temporary variable to keep a pointer to struct device. Utilise it where it makes sense. Signed-off-by:
-
Andy Shevchenko authored
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add mod_devicetable.h include. Signed-off-by:
-
Andy Shevchenko authored
LED core provides a helper to parse default state from firmware node. Use it instead of custom implementation. Signed-off-by:
-
Andy Shevchenko authored
Add a missing call to of_node_put(np) on error. Signed-off-by:
-
Markus Elfring authored
Add a label so that a bit of exception handling can be better reused at the end of this function implementation. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Link: https://lore.kernel.org/r/5faec5de-fc36-4b38-abcb-c61954a824cd@web.deSigned-off-by:
-
Lee Jones authored
If both set_brightness functions return -ENOTSUPP, then the LED doesn't support setting a fixed brightness value, and the error message isn't helpful. This can be the case e.g. for LEDs supporting a specific hw trigger only. Pinched the subject line and commit message from Heiner: Link: https://lore.kernel.org/all/44177e37-9512-4044-8991-bb23b184bf37@gmail.com/ Reworked the function to provide Heiner's required semantics whilst simultaneously increasing readability and flow. Cc: Pavel Machek <pavel@ucw.cz> Cc: linux-leds@vger.kernel.org Suggested-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
-
- 21 Jun, 2024 14 commits
-
-
Hans de Goede authored
Add a new trigger which turns LEDs on when there is input (/dev/input/event*) activity and turns them back off again after there has been no activity for 5 seconds. This is primarily intended to control LED devices which are a backlight for capacitive touch-buttons, such as e.g. the menu / home / back buttons found on the bottom bezel of many somewhat older smartphones and tablets. This can also be used to turn on the keyboard backlight LED on input events and turn the keyboard backlight off again when idle. Signed-off-by:
-
Ilpo Järvinen authored
ich7_lpc_probe() uses pci_read_config_dword() that returns PCIBIOS_* codes. The error handling code assumes incorrectly it's a normal errno and checks for < 0. The return code is returned from the probe function as is but probe functions should return normal errnos. Remove < 0 from the check and convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it. Fixes: a328e95b ("leds: LED driver for Intel NAS SS4200 series (v5)") Cc: <stable@vger.kernel.org> Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240527132700.14260-1-ilpo.jarvinen@linux.intel.comSigned-off-by:
-
Jeff Johnson authored
Fix the 'make W=1" issue: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/blink/leds-bcm63138.o Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240517-md-leds-bcm63138-v1-1-247b7302edb6@quicinc.comSigned-off-by:
-
Jeff Johnson authored
Fix the 'make W=1' issues: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/simple/simatic-ipc-leds-gpio-apollolake.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/simple/simatic-ipc-leds-gpio-core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/simple/simatic-ipc-leds-gpio-elkhartlake.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/simple/simatic-ipc-leds-gpio-f7188x.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/simple/simatic-ipc-leds.o Signed-off-by:
-
Jeff Johnson authored
Fix the 'make W=1" issue: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/leds/flash/leds-rt4505.o Signed-off-by:
-
Uwe Kleine-König authored
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240522165358.62238-2-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Hans de Goede authored
Some triggers call led_trigger_event() from their activate() callback to initialize the brightness of the LED for which the trigger is being activated. In order for the LED's initial state to be set correctly this requires that the led_trigger_event() call uses the new version of trigger->led_cdevs, which has the new LED. AFAICT led_trigger_event() will always use the new version when it is running on the same CPU as where the list_add_tail_rcu() call was made, which is why the missing synchronize_rcu() has not lead to bug reports. But if activate() is pre-empted, sleeps or uses a worker then the led_trigger_event() call may run on another CPU which may still use the old trigger->led_cdevs list. Add a synchronize_rcu() call to ensure that any led_trigger_event() calls done from activate() always use the new list. Triggers using led_trigger_event() from their activate() callback are: net/bluetooth/leds.c, net/rfkill/core.c and drivers/tty/vt/keyboard.c. Signed-off-by:
-
Aryabhatta Dey authored
Change 'dasy-chain' to 'daisy-chain'. Signed-off-by:
Aryabhatta Dey <aryabhattadey35@gmail.com> Link: https://lore.kernel.org/r/qpnx2m6qo5abvbs65o452gicumxa7n5vnw42e3hxnnm7sou4xn@fvu52tilzujcSigned-off-by:
-
Hans de Goede authored
Triggers which have trigger specific sysfs attributes typically store related data in trigger-data allocated by the activate() callback and freed by the deactivate() callback. Calling device_remove_groups() after calling deactivate() leaves a window where the sysfs attributes show/store functions could be called after deactivation and then operate on the just freed trigger-data. Move the device_remove_groups() call to before deactivate() to close this race window. This also makes the deactivation path properly do things in reverse order of the activation path which calls the activate() callback before calling device_add_groups(). Fixes: a7e7a315 ("leds: triggers: add device attribute support") Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Christophe JAILLET authored
'is31fl3190_regmap_config' and 'is31fl3196_regmap_config' are not modified in this diver and are only used as a const struct regmap_config. Constifying these structures moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: text data bss dec hex filename 13827 2002 32 15861 3df5 drivers/leds/leds-is31fl319x.o After: text data bss dec hex filename 14467 1370 32 15869 3dfd drivers/leds/leds-is31fl319x.o Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/82a5cb26ff8af1865a790286bdbc3c4a2bd149f1.1714892598.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Lee Jones authored
Merge branches 'ib-leds-mfd-6.11', 'ib-leds-platform-power-6.11' and 'ib-mfd-leds-platform-6.11' into ibs-for-leds-merged
-
Thomas Weißschuh authored
Add ChromeOS EC-based LED control as EC subdevice. Signed-off-by:
-
Thomas Weißschuh authored
The ChromeOS Embedded Controller exposes an LED control command. Expose its functionality through the leds subsystem. The LEDs are exposed as multicolor devices. A hardware trigger, which is active by default, is provided to let the EC itself take over control over the LED. The driver is designed to be probed via the cros_ec mfd device. Signed-off-by:
-
Thomas Weißschuh authored
There are no external users left, make the array static. Signed-off-by:
-
