In commit da11b417 ("libbpf: teach libbpf about log_level bit 2"),
the BPF_LOG_BUF_SIZE was increased to 16M. The XDP socket part of
libbpf allocated the log_buf on the stack, but for the new 16M buffer
size this is not going to work. Change the code so it uses a 16K buffer
instead.

Fixes: da11b417 ("libbpf: teach libbpf about log_level bit 2")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The issue is reported at https://github.com/libbpf/libbpf/issues/28.

Basically, per C standard, for
  void *memcpy(void *dest, const void *src, size_t n)
if "dest" or "src" is NULL, regardless of whether "n" is 0 or not,
the result of memcpy is undefined. clang ubsan reported three such
instances in bpf.c with the following pattern:
  memcpy(dest, 0, 0).

Although in practice, no known compiler will cause issues when
copy size is 0. Let us still fix the issue to silence ubsan
warnings.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Daniel Borkmann says:

====================
This series is a major rework of previously submitted libbpf
patches [0] in order to add global data support for BPF. The
kernel has been extended to add proper infrastructure that allows
for full .bss/.data/.rodata sections on BPF loader side based
upon feedback from LPC discussions [1]. Latter support is then
also added into libbpf in this series which allows for more
natural C-like programming of BPF programs. For more information
on loader, please refer to 'bpf, libbpf: support global data/bss/
rodata sections' patch in this series.

Thanks a lot!

  v5 -> v6:
   - Removed synchronize_rcu() from map freeze (Jann)
   - Rest as-is
  v4 -> v5:
   - Removed index selection again for ldimm64 (Alexei)
   - Adapted related test cases and added new ones to test
     rejection of off != 0
  v3 -> v4:
   - Various fixes in BTF verification e.g. to disallow
     Var and DataSec to be an intermediate type during resolve (Martin)
   - More BTF test cases added
   - Few cleanups in key-less BTF commit (Martin)
   - Bump libbpf minor version from 2 to 3
   - Renamed and simplified read-only locking
   - Various minor improvements all over the place
  v2 -> v3:
   - Implement BTF support in kernel, libbpf, bpftool, add tests
   - Fix idx + off conversion (Andrii)
   - Document lower / higher bits for direct value access (Andrii)
   - Add tests with small value size (Andrii)
   - Add index selection into ldimm64 (Andrii)
   - Fix missing fdput() (Jann)
   - Reject invalid flags in BPF_F_*_PROG (Jakub)
   - Complete rework of libbpf support, includes:
    - Add objname to map name (Stanislav)
    - Make .rodata map full read-only after setup (Andrii)
    - Merge relocation handling into single one (Andrii)
    - Store global maps into obj->maps array (Andrii, Alexei)
    - Debug message when skipping section (Andrii)
    - Reject non-static global data till we have
      semantics for sharing them (Yonghong, Andrii, Alexei)
    - More test cases and completely reworked prog test (Alexei)
   - Fixes, cleanups, etc all over the set
   - Not yet addressed:
    - Make BTF mandatory for these maps (Alexei)
    -> Waiting till BTF support for these lands first
  v1 -> v2:
    - Instead of 32-bit static data, implement full global
      data support (Alexei)

  [0] https://patchwork.ozlabs.org/cover/1040290/
  [1] http://vger.kernel.org/lpc-bpf2018.html#session-3
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Extend test_btf with various positive and negative tests around
BTF verification of kind Var and DataSec. All passing as well:

  # ./test_btf
  [...]
  BTF raw test[4] (global data test #1): OK
  BTF raw test[5] (global data test #2): OK
  BTF raw test[6] (global data test #3): OK
  BTF raw test[7] (global data test #4, unsupported linkage): OK
  BTF raw test[8] (global data test #5, invalid var type): OK
  BTF raw test[9] (global data test #6, invalid var type (fwd type)): OK
  BTF raw test[10] (global data test #7, invalid var type (fwd type)): OK
  BTF raw test[11] (global data test #8, invalid var size): OK
  BTF raw test[12] (global data test #9, invalid var size): OK
  BTF raw test[13] (global data test #10, invalid var size): OK
  BTF raw test[14] (global data test #11, multiple section members): OK
  BTF raw test[15] (global data test #12, invalid offset): OK
  BTF raw test[16] (global data test #13, invalid offset): OK
  BTF raw test[17] (global data test #14, invalid offset): OK
  BTF raw test[18] (global data test #15, not var kind): OK
  BTF raw test[19] (global data test #16, invalid var referencing sec): OK
  BTF raw test[20] (global data test #17, invalid var referencing var): OK
  BTF raw test[21] (global data test #18, invalid var loop): OK
  BTF raw test[22] (global data test #19, invalid var referencing var): OK
  BTF raw test[23] (global data test #20, invalid ptr referencing var): OK
  BTF raw test[24] (global data test #21, var included in struct): OK
  BTF raw test[25] (global data test #22, array of var): OK
  [...]
  PASS:167 SKIP:0 FAIL:0
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add tests for libbpf relocation of static variable references
into the .data, .rodata and .bss sections of the ELF, also add
read-only test for .rodata. All passing:

  # ./test_progs
  [...]
  test_global_data:PASS:load program 0 nsec
  test_global_data:PASS:pass global data run 925 nsec
  test_global_data_number:PASS:relocate .bss reference 925 nsec
  test_global_data_number:PASS:relocate .data reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_number:PASS:relocate .bss reference 925 nsec
  test_global_data_number:PASS:relocate .data reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_number:PASS:relocate .bss reference 925 nsec
  test_global_data_number:PASS:relocate .bss reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_string:PASS:relocate .rodata reference 925 nsec
  test_global_data_string:PASS:relocate .data reference 925 nsec
  test_global_data_string:PASS:relocate .bss reference 925 nsec
  test_global_data_string:PASS:relocate .data reference 925 nsec
  test_global_data_string:PASS:relocate .bss reference 925 nsec
  test_global_data_struct:PASS:relocate .rodata reference 925 nsec
  test_global_data_struct:PASS:relocate .bss reference 925 nsec
  test_global_data_struct:PASS:relocate .rodata reference 925 nsec
  test_global_data_struct:PASS:relocate .data reference 925 nsec
  test_global_data_rdonly:PASS:test .rodata read-only map 925 nsec
  [...]
  Summary: 229 PASSED, 0 FAILED

Note map helper signatures have been changed to avoid warnings
when passing in const data.

Joint work with Daniel Borkmann.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Extend test_verifier with various test cases around the two kernel
extensions, that is, {rd,wr}only map support as well as direct map
value access. All passing, one skipped due to xskmap not present
on test machine:

  # ./test_verifier
  [...]
  #948/p XDP pkt read, pkt_meta' <= pkt_data, bad access 1 OK
  #949/p XDP pkt read, pkt_meta' <= pkt_data, bad access 2 OK
  #950/p XDP pkt read, pkt_data <= pkt_meta', good access OK
  #951/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK
  #952/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK
  Summary: 1410 PASSED, 1 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add the ability to bpftool to handle BTF Var and DataSec kinds
in order to dump them out of btf_dumper_type(). The value has a
single object with the section name, which itself holds an array
of variables it dumps. A single variable is an object by itself
printed along with its name. From there further type information
is dumped along with corresponding value information.

Example output from .rodata:

  # ./bpftool m d i 150
  [{
          "value": {
              ".rodata": [{
                      "load_static_data.bar": 18446744073709551615
                  },{
                      "num2": 24
                  },{
                      "num5": 43947
                  },{
                      "num6": 171
                  },{
                      "str0": [97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,0,0,0,0,0,0
                      ]
                  },{
                      "struct0": {
                          "a": 42,
                          "b": 4278120431,
                          "c": 1229782938247303441
                      }
                  },{
                      "struct2": {
                          "a": 0,
                          "b": 0,
                          "c": 0
                      }
                  }
              ]
          }
      }
  ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This adds libbpf support for BTF Var and DataSec kinds. Main point
here is that libbpf needs to do some preparatory work before the
whole BTF object can be loaded into the kernel, that is, fixing up
of DataSec size taken from the ELF section size and non-static
variable offset which needs to be taken from the ELF's string section.

Upstream LLVM doesn't fix these up since at time of BTF emission
it is too early in the compilation process thus this information
isn't available yet, hence loader needs to take care of it.

Note, deduplication handling has not been in the scope of this work
and needs to be addressed in a future commit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://reviews.llvm.org/D59441Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This work adds BPF loader support for global data sections
to libbpf. This allows to write BPF programs in more natural
C-like way by being able to define global variables and const
data.

Back at LPC 2018 [0] we presented a first prototype which
implemented support for global data sections by extending BPF
syscall where union bpf_attr would get additional memory/size
pair for each section passed during prog load in order to later
add this base address into the ldimm64 instruction along with
the user provided offset when accessing a variable. Consensus
from LPC was that for proper upstream support, it would be
more desirable to use maps instead of bpf_attr extension as
this would allow for introspection of these sections as well
as potential live updates of their content. This work follows
this path by taking the following steps from loader side:

 1) In bpf_object__elf_collect() step we pick up ".data",
    ".rodata", and ".bss" section information.

 2) If present, in bpf_object__init_internal_map() we add
    maps to the obj's map array that corresponds to each
    of the present sections. Given section size and access
    properties can differ, a single entry array map is
    created with value size that is corresponding to the
    ELF section size of .data, .bss or .rodata. These
    internal maps are integrated into the normal map
    handling of libbpf such that when user traverses all
    obj maps, they can be differentiated from user-created
    ones via bpf_map__is_internal(). In later steps when
    we actually create these maps in the kernel via
    bpf_object__create_maps(), then for .data and .rodata
    sections their content is copied into the map through
    bpf_map_update_elem(). For .bss this is not necessary
    since array map is already zero-initialized by default.
    Additionally, for .rodata the map is frozen as read-only
    after setup, such that neither from program nor syscall
    side writes would be possible.

 3) In bpf_program__collect_reloc() step, we record the
    corresponding map, insn index, and relocation type for
    the global data.

 4) And last but not least in the actual relocation step in
    bpf_program__relocate(), we mark the ldimm64 instruction
    with src_reg = BPF_PSEUDO_MAP_VALUE where in the first
    imm field the map's file descriptor is stored as similarly
    done as in BPF_PSEUDO_MAP_FD, and in the second imm field
    (as ldimm64 is 2-insn wide) we store the access offset
    into the section. Given these maps have only single element
    ldimm64's off remains zero in both parts.

 5) On kernel side, this special marked BPF_PSEUDO_MAP_VALUE
    load will then store the actual target address in order
    to have a 'map-lookup'-free access. That is, the actual
    map value base address + offset. The destination register
    in the verifier will then be marked as PTR_TO_MAP_VALUE,
    containing the fixed offset as reg->off and backing BPF
    map as reg->map_ptr. Meaning, it's treated as any other
    normal map value from verification side, only with
    efficient, direct value access instead of actual call to
    map lookup helper as in the typical case.

Currently, only support for static global variables has been
added, and libbpf rejects non-static global variables from
loading. This can be lifted until we have proper semantics
for how BPF will treat multi-object BPF loads. From BTF side,
libbpf will set the value type id of the types corresponding
to the ".bss", ".data" and ".rodata" names which LLVM will
emit without the object name prefix. The key type will be
left as zero, thus making use of the key-less BTF option in
array maps.

Simple example dump of program using globals vars in each
section:

  # bpftool prog
  [...]
  6784: sched_cls  name load_static_dat  tag a7e1291567277844  gpl
        loaded_at 2019-03-11T15:39:34+0000  uid 0
        xlated 1776B  jited 993B  memlock 4096B  map_ids 2238,2237,2235,2236,2239,2240

  # bpftool map show id 2237
  2237: array  name test_glo.bss  flags 0x0
        key 4B  value 64B  max_entries 1  memlock 4096B
  # bpftool map show id 2235
  2235: array  name test_glo.data  flags 0x0
        key 4B  value 64B  max_entries 1  memlock 4096B
  # bpftool map show id 2236
  2236: array  name test_glo.rodata  flags 0x80
        key 4B  value 96B  max_entries 1  memlock 4096B

  # bpftool prog dump xlated id 6784
  int load_static_data(struct __sk_buff * skb):
  ; int load_static_data(struct __sk_buff *skb)
     0: (b7) r6 = 0
  ; test_reloc(number, 0, &num0);
     1: (63) *(u32 *)(r10 -4) = r6
     2: (bf) r2 = r10
  ; int load_static_data(struct __sk_buff *skb)
     3: (07) r2 += -4
  ; test_reloc(number, 0, &num0);
     4: (18) r1 = map[id:2238]
     6: (18) r3 = map[id:2237][0]+0    <-- direct addr in .bss area
     8: (b7) r4 = 0
     9: (85) call array_map_update_elem#100464
    10: (b7) r1 = 1
  ; test_reloc(number, 1, &num1);
  [...]
  ; test_reloc(string, 2, str2);
   120: (18) r8 = map[id:2237][0]+16   <-- same here at offset +16
   122: (18) r1 = map[id:2239]
   124: (18) r3 = map[id:2237][0]+16
   126: (b7) r4 = 0
   127: (85) call array_map_update_elem#100464
   128: (b7) r1 = 120
  ; str1[5] = 'x';
   129: (73) *(u8 *)(r9 +5) = r1
  ; test_reloc(string, 3, str1);
   130: (b7) r1 = 3
   131: (63) *(u32 *)(r10 -4) = r1
   132: (b7) r9 = 3
   133: (bf) r2 = r10
  ; int load_static_data(struct __sk_buff *skb)
   134: (07) r2 += -4
  ; test_reloc(string, 3, str1);
   135: (18) r1 = map[id:2239]
   137: (18) r3 = map[id:2235][0]+16   <-- direct addr in .data area
   139: (b7) r4 = 0
   140: (85) call array_map_update_elem#100464
   141: (b7) r1 = 111
  ; __builtin_memcpy(&str2[2], "hello", sizeof("hello"));
   142: (73) *(u8 *)(r8 +6) = r1       <-- further access based on .bss data
   143: (b7) r1 = 108
   144: (73) *(u8 *)(r8 +5) = r1
  [...]

For Cilium use-case in particular, this enables migrating configuration
constants from Cilium daemon's generated header defines into global
data sections such that expensive runtime recompilations with LLVM can
be avoided altogether. Instead, the ELF file becomes effectively a
"template", meaning, it is compiled only once (!) and the Cilium daemon
will then rewrite relevant configuration data from the ELF's .data or
.rodata sections directly instead of recompiling the program. The
updated ELF is then loaded into the kernel and atomically replaces
the existing program in the networking datapath. More info in [0].

Based upon recent fix in LLVM, commit c0db6b6bd444 ("[BPF] Don't fail
for static variables").

  [0] LPC 2018, BPF track, "ELF relocation for static data in BPF",
      http://vger.kernel.org/lpc-bpf2018.html#session-3Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adjust the code for relocations slightly with no functional changes,
so that upcoming patches that will introduce support for relocations
into the .data, .rodata and .bss sections can be added independent
of these changes.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Pull in latest changes from both headers, so we can make use of
them in libbpf.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Given we'll be reusing BPF array maps for global data/bss/rodata
sections, we need a way to associate BTF DataSec type as its map
value type. In usual cases we have this ugly BPF_ANNOTATE_KV_PAIR()
macro hack e.g. via 38d5d3b3 ("bpf: Introduce BPF_ANNOTATE_KV_PAIR")
to get initial map to type association going. While more use cases
for it are discouraged, this also won't work for global data since
the use of array map is a BPF loader detail and therefore unknown
at compilation time. For array maps with just a single entry we make
an exception in terms of BTF in that key type is declared optional
if value type is of DataSec type. The latter LLVM is guaranteed to
emit and it also aligns with how we regard global data maps as just
a plain buffer area reusing existing map facilities for allowing
things like introspection with existing tools.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This work adds kernel-side verification, logging and seq_show dumping
of BTF Var and DataSec kinds which are emitted with latest LLVM. The
following constraints apply:

BTF Var must have:

- Its kind_flag is 0
- Its vlen is 0
- Must point to a valid type
- Type must not resolve to a forward type
- Size of underlying type must be > 0
- Must have a valid name
- Can only be a source type, not sink or intermediate one
- Name may include dots (e.g. in case of static variables
  inside functions)
- Cannot be a member of a struct/union
- Linkage so far can either only be static or global/allocated

BTF DataSec must have:

- Its kind_flag is 0
- Its vlen cannot be 0
- Its size cannot be 0
- Must have a valid name
- Can only be a source type, not sink or intermediate one
- Name may include dots (e.g. to represent .bss, .data, .rodata etc)
- Cannot be a member of a struct/union
- Inner btf_var_secinfo array with {type,offset,size} triple
  must be sorted by offset in ascending order
- Type must always point to BTF Var
- BTF resolved size of Var must be <= size provided by triple
- DataSec size must be >= sum of triple sizes (thus holes
  are allowed)

btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve()
are on a high level quite similar but each come with slight,
subtle differences. They could potentially be a bit refactored
in future which hasn't been done here to ease review.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This adds the BTF specification and UAPI bits for supporting BTF Var
and DataSec kinds. This is following LLVM upstream commit ac4082b77e07
("[BPF] Add BTF Var and DataSec Support") which has been merged recently.
Var itself is for describing a global variable and DataSec to describe
ELF sections e.g. data/bss/rodata sections that hold one or multiple
global variables.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Trivial addition to allow '.' aside from '_' as "special" characters
in the object name. Used to allow for substrings in maps from loader
side such as ".bss", ".data", ".rodata", but could also be useful for
other purposes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds a new BPF_MAP_FREEZE command which allows to
"freeze" the map globally as read-only / immutable from syscall
side.

Map permission handling has been refactored into map_get_sys_perms()
and drops FMODE_CAN_WRITE in case of locked map. Main use case is
to allow for setting up .rodata sections from the BPF ELF which
are loaded into the kernel, meaning BPF loader first allocates
map, sets up map value by copying .rodata section into it and once
complete, it calls BPF_MAP_FREEZE on the map fd to prevent further
modifications.

Right now BPF_MAP_FREEZE only takes map fd as argument while remaining
bpf_attr members are required to be zero. I didn't add write-only
locking here as counterpart since I don't have a concrete use-case
for it on my side, and I think it makes probably more sense to wait
once there is actually one. In that case bpf_attr can be extended
as usual with a flag field and/or others where flag 0 means that
we lock the map read-only hence this doesn't prevent to add further
extensions to BPF_MAP_FREEZE upon need.

A map creation flag like BPF_F_WRONCE was not considered for couple
of reasons: i) in case of a generic implementation, a map can consist
of more than just one element, thus there could be multiple map
updates needed to set the map into a state where it can then be
made immutable, ii) WRONCE indicates exact one-time write before
it is then set immutable. A generic implementation would set a bit
atomically on map update entry (if unset), indicating that every
subsequent update from then onwards will need to bail out there.
However, map updates can fail, so upon failure that flag would need
to be unset again and the update attempt would need to be repeated
for it to be eventually made immutable. While this can be made
race-free, this approach feels less clean and in combination with
reason i), it's not generic enough. A dedicated BPF_MAP_FREEZE
command directly sets the flag and caller has the guarantee that
map is immutable from syscall side upon successful return for any
future syscall invocations that would alter the map state, which
is also more intuitive from an API point of view. A command name
such as BPF_MAP_LOCK has been avoided as it's too close with BPF
map spin locks (which already has BPF_F_LOCK flag). BPF_MAP_FREEZE
is so far only enabled for privileged users.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This work adds two new map creation flags BPF_F_RDONLY_PROG
and BPF_F_WRONLY_PROG in order to allow for read-only or
write-only BPF maps from a BPF program side.

Today we have BPF_F_RDONLY and BPF_F_WRONLY, but this only
applies to system call side, meaning the BPF program has full
read/write access to the map as usual while bpf(2) calls with
map fd can either only read or write into the map depending
on the flags. BPF_F_RDONLY_PROG and BPF_F_WRONLY_PROG allows
for the exact opposite such that verifier is going to reject
program loads if write into a read-only map or a read into a
write-only map is detected. For read-only map case also some
helpers are forbidden for programs that would alter the map
state such as map deletion, update, etc. As opposed to the two
BPF_F_RDONLY / BPF_F_WRONLY flags, BPF_F_RDONLY_PROG as well
as BPF_F_WRONLY_PROG really do correspond to the map lifetime.

We've enabled this generic map extension to various non-special
maps holding normal user data: array, hash, lru, lpm, local
storage, queue and stack. Further generic map types could be
followed up in future depending on use-case. Main use case
here is to forbid writes into .rodata map values from verifier
side.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Both BPF_F_WRONLY / BPF_F_RDONLY flags are tied to the map file
descriptor, but not to the map object itself! Meaning, at map
creation time BPF_F_RDONLY can be set to make the map read-only
from syscall side, but this holds only for the returned fd, so
any other fd either retrieved via bpf file system or via map id
for the very same underlying map object can have read-write access
instead.

Given that, keeping the two flags around in the map_flags attribute
and exposing them to user space upon map dump is misleading and
may lead to false conclusions. Since these two flags are not
tied to the map object lets also not store them as map property.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This generic extension to BPF maps allows for directly loading
an address residing inside a BPF map value as a single BPF
ldimm64 instruction!

The idea is similar to what BPF_PSEUDO_MAP_FD does today, which
is a special src_reg flag for ldimm64 instruction that indicates
that inside the first part of the double insns's imm field is a
file descriptor which the verifier then replaces as a full 64bit
address of the map into both imm parts. For the newly added
BPF_PSEUDO_MAP_VALUE src_reg flag, the idea is the following:
the first part of the double insns's imm field is again a file
descriptor corresponding to the map, and the second part of the
imm field is an offset into the value. The verifier will then
replace both imm parts with an address that points into the BPF
map value at the given value offset for maps that support this
operation. Currently supported is array map with single entry.
It is possible to support more than just single map element by
reusing both 16bit off fields of the insns as a map index, so
full array map lookup could be expressed that way. It hasn't
been implemented here due to lack of concrete use case, but
could easily be done so in future in a compatible way, since
both off fields right now have to be 0 and would correctly
denote a map index 0.

The BPF_PSEUDO_MAP_VALUE is a distinct flag as otherwise with
BPF_PSEUDO_MAP_FD we could not differ offset 0 between load of
map pointer versus load of map's value at offset 0, and changing
BPF_PSEUDO_MAP_FD's encoding into off by one to differ between
regular map pointer and map value pointer would add unnecessary
complexity and increases barrier for debugability thus less
suitable. Using the second part of the imm field as an offset
into the value does /not/ come with limitations since maximum
possible value size is in u32 universe anyway.

This optimization allows for efficiently retrieving an address
to a map value memory area without having to issue a helper call
which needs to prepare registers according to calling convention,
etc, without needing the extra NULL test, and without having to
add the offset in an additional instruction to the value base
pointer. The verifier then treats the destination register as
PTR_TO_MAP_VALUE with constant reg->off from the user passed
offset from the second imm field, and guarantees that this is
within bounds of the map value. Any subsequent operations are
normally treated as typical map value handling without anything
extra needed from verification side.

The two map operations for direct value access have been added to
array map for now. In future other types could be supported as
well depending on the use case. The main use case for this commit
is to allow for BPF loader support for global variables that
reside in .data/.rodata/.bss sections such that we can directly
load the address of them with minimal additional infrastructure
required. Loader support has been added in subsequent commits for
libbpf library.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

vsprintf() in __base_pr() uses nonliteral format string and it breaks
compilation for those who provide corresponding extra CFLAGS, e.g.:
https://github.com/libbpf/libbpf/issues/27

If libbpf is built with the flags from PR:

  libbpf.c:68:26: error: format string is not a string literal
  [-Werror,-Wformat-nonliteral]
          return vfprintf(stderr, format, args);
                                  ^~~~~~
  1 error generated.

Ignore this warning since the use case in libbpf.c is legit.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Andrey Ignatov says:

====================
v2->v3:
- sanity check max value for variable offset.

v1->v2:
- rely on meta = NULL to reject var_off stack access to uninit buffer.

This patch set is a follow-up for discussion [1].

It fixes variable offset stack access handling for raw and unprivileged
mode, rejecting both of them, and sanity checks max variable offset value.

Patch 1 handles raw (uninitialized) mode.
Patch 2 adds test for raw mode.
Patch 3 handles unprivileged mode.
Patch 4 adds test for unprivileged mode.
Patch 5 adds sanity check for max value of variable offset.
Patch 6 adds test for variable offset max value checking.
Patch 7 is a minor fix in verbose log.

Unprivileged mode is an interesting case since one (and only?) way to come
up with variable offset is to use pointer arithmetics. Though pointer
arithmetics is already prohibited for unprivileged mode. I'm not sure if
it's enough though and it seems like a good idea to still reject variable
offset for unpriv in check_stack_boundary(). Please see patches 3 and 4
for more details on this.

[1] https://marc.info/?l=linux-netdev&m=155419526427742&w=2
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

check_stack_access() that prints verbose log is used in
adjust_ptr_min_max_vals() that prints its own verbose log and now they
stick together, e.g.:

  variable stack access var_off=(0xfffffffffffffff0; 0x4) off=-16
  size=1R2 stack pointer arithmetic goes out of range, prohibited for
  !root

Add missing newline so that log is more readable:
  variable stack access var_off=(0xfffffffffffffff0; 0x4) off=-16 size=1
  R2 stack pointer arithmetic goes out of range, prohibited for !root

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Test the case when reg->smax_value is too small/big and can overflow,
and separately min and max values outside of stack bounds.

Example of output:
  # ./test_verifier
  #856/p indirect variable-offset stack access, unbounded OK
  #857/p indirect variable-offset stack access, max out of bound OK
  #858/p indirect variable-offset stack access, min out of bound OK
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

As discussed in [1] max value of variable offset has to be checked for
overflow on stack access otherwise verifier would accept code like this:

  0: (b7) r2 = 6
  1: (b7) r3 = 28
  2: (7a) *(u64 *)(r10 -16) = 0
  3: (7a) *(u64 *)(r10 -8) = 0
  4: (79) r4 = *(u64 *)(r1 +168)
  5: (c5) if r4 s< 0x0 goto pc+4
   R1=ctx(id=0,off=0,imm=0) R2=inv6 R3=inv28
   R4=inv(id=0,umax_value=9223372036854775807,var_off=(0x0;
   0x7fffffffffffffff)) R10=fp0,call_-1 fp-8=mmmmmmmm fp-16=mmmmmmmm
  6: (17) r4 -= 16
  7: (0f) r4 += r10
  8: (b7) r5 = 8
  9: (85) call bpf_getsockopt#57
  10: (b7) r0 = 0
  11: (95) exit

, where R4 obviosly has unbounded max value.

Fix it by checking that reg->smax_value is inside (-BPF_MAX_VAR_OFF;
BPF_MAX_VAR_OFF) range.

reg->smax_value is used instead of reg->umax_value because stack
pointers are calculated using negative offset from fp. This is opposite
to e.g. map access where offset must be non-negative and where
umax_value is used.

Also dedicated verbose logs are added for both min and max bound check
failures to have diagnostics consistent with variable offset handling in
check_map_access().

[1] https://marc.info/?l=linux-netdev&m=155433357510597&w=2

Fixes: 2011fccf ("bpf: Support variable offset stack access from helpers")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Test that verifier rejects indirect stack access with variable offset in
unprivileged mode and accepts same code in privileged mode.

Since pointer arithmetics is prohibited in unprivileged mode verifier
should reject the program even before it gets to helper call that uses
variable offset, at the time when that variable offset is trying to be
constructed.

Example of output:
  # ./test_verifier
  ...
  #859/u indirect variable-offset stack access, priv vs unpriv OK
  #859/p indirect variable-offset stack access, priv vs unpriv OK
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Proper support of indirect stack access with variable offset in
unprivileged mode (!root) requires corresponding support in Spectre
masking for stack ALU in retrieve_ptr_limit().

There are no use-case for variable offset in unprivileged mode though so
make verifier reject such accesses for simplicity.

Pointer arithmetics is one (and only?) way to cause variable offset and
it's already rejected in unpriv mode so that verifier won't even get to
helper function whose argument contains variable offset, e.g.:

  0: (7a) *(u64 *)(r10 -16) = 0
  1: (7a) *(u64 *)(r10 -8) = 0
  2: (61) r2 = *(u32 *)(r1 +0)
  3: (57) r2 &= 4
  4: (17) r2 -= 16
  5: (0f) r2 += r10
  variable stack access var_off=(0xfffffffffffffff0; 0x4) off=-16 size=1R2
  stack pointer arithmetic goes out of range, prohibited for !root

Still it looks like a good idea to reject variable offset indirect stack
access for unprivileged mode in check_stack_boundary() explicitly.

Fixes: 2011fccf ("bpf: Support variable offset stack access from helpers")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Test that verifier rejects indirect access to uninitialized stack with
variable offset.

Example of output:
  # ./test_verifier
  ...
  #859/p indirect variable-offset stack access, uninitialized OK
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

It's hard to guarantee that whole memory is marked as initialized on
helper return if uninitialized stack is accessed with variable offset
since specific bounds are unknown to verifier. This may cause
uninitialized stack leaking.

Reject such an access in check_stack_boundary to prevent possible
leaking.

There are no known use-cases for indirect uninitialized stack access
with variable offset so it shouldn't break anything.

Fixes: 2011fccf ("bpf: Support variable offset stack access from helpers")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

clang started to error on invalid asm clobber usage in x86 headers
and many bpf program samples failed to build with the message:

  CLANG-bpf  /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.o
In file included from /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.c:14:
In file included from ../include/linux/in.h:23:
In file included from ../include/uapi/linux/in.h:24:
In file included from ../include/linux/socket.h:8:
In file included from ../include/linux/uio.h:14:
In file included from ../include/crypto/hash.h:16:
In file included from ../include/linux/crypto.h:26:
In file included from ../include/linux/uaccess.h:5:
In file included from ../include/linux/sched.h:15:
In file included from ../include/linux/sem.h:5:
In file included from ../include/uapi/linux/sem.h:5:
In file included from ../include/linux/ipc.h:9:
In file included from ../include/linux/refcount.h:72:
../arch/x86/include/asm/refcount.h:72:36: error: asm-specifier for input or output variable conflicts with asm clobber list
                                         r->refs.counter, e, "er", i, "cx");
                                                                      ^
../arch/x86/include/asm/refcount.h:86:27: error: asm-specifier for input or output variable conflicts with asm clobber list
                                         r->refs.counter, e, "cx");
                                                             ^
2 errors generated.

Override volatile() to workaround the problem.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Since, ksym_search added with verification logic for symbols existence,
it could return NULL when the kernel symbols are not loaded.

This commit will add NULL check logic after ksym_search.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently, ksym_search located at trace_helpers won't check symbols are
existing or not.

In ksym_search, when symbol is not found, it will return &syms[0](_stext).
But when the kernel symbols are not loaded, it will return NULL, which is
not a desired action.

This commit will add verification logic whether symbols are loaded prior
to the symbol search.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Alexei Starovoitov says:

====================
v1->v2:
- fixed typo in patch 1
- added a patch to convert kcalloc to kvcalloc
- added a patch to verbose 16-bit jump offset check
- added a test with 1m insns

This patch set is the first step to be able to accept large programs.
The verifier still suffers from its brute force algorithm and
large programs can easily hit 1M insn_processed limit.
A lot more work is necessary to be able to verify large programs.

v1:
Realize two key ideas to speed up verification speed by ~20 times
1. every 'branching' instructions records all verifier states.
   not all of them are useful for search pruning.
   add a simple heuristic to keep states that were successful in search pruning
   and remove those that were not
2. mark_reg_read walks parentage chain of registers to mark parents as LIVE_READ.
   Once the register is marked there is no need to remark it again in the future.
   Hence stop walking the chain once first LIVE_READ is seen.

1st optimization gives 10x speed up on large programs
and 2nd optimization reduces the cost of mark_reg_read from ~40% of cpu to <1%.
Combined the deliver ~20x speedup on large programs.

Faster and bounded verification time allows to increase insn_processed
limit to 1 million from 130k.
Worst case it takes 1/10 of a second to process that many instructions
and peak memory consumption is peak_states * sizeof(struct bpf_verifier_state)
which is around ~5Mbyte.

Increase insn_per_program limit for root to insn_processed limit.

Add verification stats and stress tests for verifier scalability.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a test to generate 1m ld_imm64 insns to stress the verifier.

Bump the size of fill_ld_abs_vlan_push_pop test from 4k to 29k
and jump_around_ld_abs from 4k to 5.5k.
Larger sizes are not possible due to 16-bit offset encoding
in jump instructions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add 3 basic tests that stress verifier scalability.

test_verif_scale1.c calls non-inlined jhash() function 90 times on
different position in the packet.
This test simulates network packet parsing.
jhash function is ~140 instructions and main program is ~1200 insns.

test_verif_scale2.c force inlines jhash() function 90 times.
This program is ~15k instructions long.

test_verif_scale3.c calls non-inlined jhash() function 90 times on
But this time jhash has to process 32-bytes from the packet
instead of 14-bytes in tests 1 and 2.
jhash function is ~230 insns and main program is ~1200 insns.

$ test_progs -s
can be used to see verifier stats.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Allow bpf_prog_load_xattr() to specify log_level for program loading.

Teach libbpf to accept log_level with bit 2 set.

Increase default BPF_LOG_BUF_SIZE from 256k to 16M.
There is no downside to increase it to a maximum allowed by old kernels.
Existing 256k limit caused ENOSPC errors and users were not able to see
verifier error which is printed at the end of the verifier log.

If ENOSPC is hit, double the verifier log and try again to capture
the verifier error.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The existing 16Mbyte verifier log limit is not enough for log_level=2
even for small programs. Increase it to 1Gbyte.
Note it's not a kernel memory limit.
It's an amount of memory user space provides to store
the verifier log. The kernel populates it 1k at a time.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Large verifier speed improvements allow to increase
verifier complexity limit.
Now regardless of the program composition and its size it takes
little time for the verifier to hit insn_processed limit.
On typical x86 machine non-debug kernel processes 1M instructions
in 1/10 of a second.
(before these speed improvements specially crafted programs
could be hitting multi-second verification times)
Full kasan kernel with debug takes ~1 second for the same 1M insns.
Hence bump the BPF_COMPLEXITY_LIMIT_INSNS limit to 1M.
Also increase the number of instructions per program
from 4k to internal BPF_COMPLEXITY_LIMIT_INSNS limit.
4k limit was confusing to users, since small programs with hundreds
of insns could be hitting BPF_COMPLEXITY_LIMIT_INSNS limit.
Sometimes adding more insns and bpf_trace_printk debug statements
would make the verifier accept the program while removing
code would make the verifier reject it.
Some user space application started to add #define MAX_FOO to
their programs and do:
  MAX_FOO=100;
again:
  compile with MAX_FOO;
  try to load;
  if (fails_to_load) { reduce MAX_FOO; goto again; }
to be able to fit maximum amount of processing into single program.
Other users artificially split their single program into a set of programs
and use all 32 iterations of tail_calls to increase compute limits.
And the most advanced folks used unlimited tc-bpf filter list
to execute many bpf programs.
Essentially the users managed to workaround 4k insn limit.
This patch removes the limit for root programs from uapi.
BPF_COMPLEXITY_LIMIT_INSNS is the kernel internal limit
and success to load the program no longer depends on program size,
but on 'smartness' of the verifier only.
The verifier will continue to get smarter with every kernel release.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Larger programs may trigger 16-bit jump offset overflow check
during instruction patching. Make this error verbose otherwise
users cannot decipher error code without printks in the verifier.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Temporary arrays used during program verification need to be vmalloc-ed
to support large bpf programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

With large verifier speed improvement brought by the previous patch
mark_reg_read() becomes the hottest function during verification.
On a typical program it consumes 40% of cpu.
mark_reg_read() walks parentage chain of registers to mark parents as LIVE_READ.
Once the register is marked there is no need to remark it again in the future.
Hence stop walking the chain once first LIVE_READ is seen.
This optimization drops mark_reg_read() time from 40% of cpu to <1%
and overall 2x improvement of verification speed.
For some programs the longest_mark_read_walk counter improves from ~500 to ~5
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>