- 17 May, 2024 23 commits
-
-
Dmitry Baryshkov authored
Remove conditional code and always use mipi_dsi_dcs_*multi() wrappers to simplify driver's init/exit code. Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240512-dsi-panels-upd-api-v2-4-e31ca14d102e@linaro.orgSigned-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240512-dsi-panels-upd-api-v2-4-e31ca14d102e@linaro.org
-
Dmitry Baryshkov authored
Remove conditional code and always use mipi_dsi_dcs_*multi() wrappers to simplify driver's init/exit code. Reviewed-by:
-
Dmitry Baryshkov authored
Follow the pattern of mipi_dsi_dcs_*_multi() and wrap several existing MIPI DSI functions to use the context for processing. This simplifies and streamlines driver code to use simpler code pattern. Note, msleep function is also wrapped in this way as it is frequently called inbetween other mipi_dsi_dcs_*() functions. Signed-off-by:
-
Dmitry Baryshkov authored
Add missing error handling for the mipi_dsi_ functions that actually return error code instead of silently ignoring it. Fixes: 069a6c0e ("drm: panel: Add LG sw43408 panel driver") Reviewed-by:
-
Thomas Zimmermann authored
Mgag200's .get_modes() function is identical to the common helper. Use the latter. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-11-tzimmermann@suse.de
-
Thomas Zimmermann authored
The modeset lock protects the DDC code from concurrent modeset operations, which use the same registers. Move that code from the connector helpers into the DDC helpers .pre_xfer() and .post_xfer(). Both, .pre_xfer() and .post_xfer(), enclose the transfer of data blocks over the I2C channel in the internal I2C function bit_xfer(). Both calls are executed unconditionally if present. Invoking DDC transfers from any where within the driver now takes the lock. Signed-off-by:
-
Thomas Zimmermann authored
Align the names of the algo-bit helpers with mgag200's convention of using an mgag200 prefix plus the struct's name plus the callback's name for such function symbols. Signed-off-by:
-
Thomas Zimmermann authored
Rename the source file according to its content. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename struct mga_i2c_chan to struct mgag200_ddc, define it in the source file mgag200_i2c.c, and reorder its fields. Rename all related variables from i2c to ddc. Also rename the i2c adapter accordingly. Using the term 'ddc' documents the purpose of the code clearly. The old term 'i2c' could refer to any functionality on an i2c bus. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
The function mgag200_i2c_init() is an internal helper that sets up the i2c data structure. Inline its code into the only caller. Rearrange the individual steps to separate among i2c algorithm, adapter and fields in struct mga_i2c_chan. Signed-off-by:
-
Thomas Zimmermann authored
Allocate instances of struct mga_i2c_chan in mgag200_ddc_create() and return a pointer to the contained i2c adapter. The callers of the function are now independent from struct mga_i2c_chan. Signed-off-by:
-
Thomas Zimmermann authored
Avoid upcasting to struct mga_device in i2c code by storing the pointer directly. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Managed cleanup with devm_add_action_or_reset() will release the I2C adapter when the underlying Linux device goes away. But the connector still refers to it, so this cleanup leaves behind a stale pointer in struct drm_connector.ddc. Bind the lifetime of the I2C adapter to the connector's lifetime by using DRM's managed release. When the DRM device goes away (after the Linux device) DRM will first clean up the connector and then clean up the I2C adapter. Signed-off-by:
-
Thomas Zimmermann authored
Compute the i2c timeout in jiffies from a value in milliseconds. The original values of 2 jiffies equals 2 milliseconds if HZ has been configured to a value of 1000. This corresponds to 2.2 milliseconds used by most other DRM drivers. Update mgag200 accordingly. Signed-off-by:
-
Cong Yang authored
The IVO t109nw41 is a 11.0" WUXGA TFT LCD panel, use hx83102 controller which fits in nicely with the existing panel-himax-hx83102 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240516072039.1287065-7-yangcong5@huaqin.corp-partner.google.comSigned-off-by:
-
Cong Yang authored
The IVO t109nw41 is a 11.0" WUXGA TFT LCD panel with himax-hx83102 controller. Hence, we add a new compatible with panel specific config. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240516072039.1287065-6-yangcong5@huaqin.corp-partner.google.comSigned-off-by:
-
Cong Yang authored
The BOE nv110wum-l60 is a 11.0" WUXGA TFT LCD panel, use hx83102 controller which fits in nicely with the existing panel-himax-hx83102 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
-
Cong Yang authored
The BOE nv110wum-l60 is a 11.0" WUXGA TFT LCD panel with himax-hx83102 controller. Hence, we add a new compatible with panel specific config. Signed-off-by:
-
Cong Yang authored
The Starry HX83102 based mipi panel should never have been part of the boe tv101wum-n16 driver. Discussion with Doug and Linus in V1 [1], we need a separate driver to enable the hx83102 controller. In hx83102 driver, add DSI commands as macros. So it can add some panels with same control model in the future. In the old boe-tv101wum-nl6 driver inital cmds was invoked at the end of prepare() function , and call 0x11 and 0x29 at end of inital. For himax-hx83102 driver, we move 0x11 and 0x29 cmds invoked at prepare() function. Note:0x11 is mipi_dsi_dcs_exit_sleep_mode 0x29 is mipi_dsi_dcs_set_display_on [1]: https://lore.kernel.org/all/CACRpkdbzYZAS0=zBQJUC4CB2wj4s1h6n6aSAZQvdMV95r3zRUw@mail.gmail.comSigned-off-by: -
Cong Yang authored
In V1, discussed with Doug and Linus [1], we need break out as separate driver for the himax83102-j02 controller. Beacuse "starry,himax83102-j02" and in this series "BOE nv110wum-l60" "IVO t109nw41" panels use same controller, they have some common CMDS. So add new documentation for this panels. For himax83102-j02 controller, no need 3v3 supply, so remove it. [1]: https://lore.kernel.org/all/CACRpkdbzYZAS0=zBQJUC4CB2wj4s1h6n6aSAZQvdMV95r3zRUw@mail.gmail.comSigned-off-by:
-
Jacek Lawrynowicz authored
Use kfifo to pass IRQ sources to IRQ thread so it will be possible to use IRQ thread by multiple IRQ types. Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by:
Wachowski, Karol <karol.wachowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240515113006.457472-4-jacek.lawrynowicz@linux.intel.com
-
Wachowski, Karol authored
The NPU device consists of two parts: NPU buttress and NPU IP. Buttress is a platform specific part that integrates the NPU IP with the CPU. NPU IP is the platform agnostic part that does the inference. This separation enables support for multiple platforms using a single NPU IP, so for example NPU IP 37XX could be integrated into MTL and LNL platforms. Signed-off-by:
-
Wachowski, Karol authored
Move buttress registers to ivpu_hw_btrs_*_reg.h headers. This is an intermediate step before HW layer refactor. Signed-off-by:
-
- 15 May, 2024 17 commits
-
-
Aradhya Bhatia authored
Add support for Microtips Technology USA MF-103HIEB0GA0 10.25"[0], 1920x720, 8-bit TFT LCD with LVDS interface. Its a Dual-LVDS Panel and does not support touch. [0]: Panel Datasheet https://simplespec.microtipsusa.com/uploads/spec/datasheetFile/2660/13-103HIEB0GA0-S_V1.0_20211206.pdfSigned-off-by:
Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by:
-
Aradhya Bhatia authored
Add support for Microtips Technology USA 13-101HIECAF0-C 10.1", 1920x1200, 8-bit TFT LCD with LVDS interface, LED backlight and touch support (ILITEK 2511). [0]: Panel Datasheet https://simplespec.microtipsusa.com/uploads/spec/datasheetFile/2588/13-101HIEBCAF0-S_V1.1_20221104.pdfSigned-off-by:
-
Aradhya Bhatia authored
Add support for Lincoln Technology Solutions LCD185-101CT, 10.1", 1920x1200, 8-bit TFT LCD with LVDS interface, LED backlight and PCAP touch support (Goodix GT928). [0]: Panel Datasheet https://lincolntechsolutions.com/wp-content/uploads/2023/04/LCD185-101CTL1ARNTT_DS_R1.3.pdfSigned-off-by:
-
Aradhya Bhatia authored
Add the Microtips Technology USA's MF-101HIEBCAF0 10.1"[0] panel, MF-103HIEB0GA0 10.25"[1] panel, and Lincoln Technology Solutions' LCD185-101CT 10.1"[2] panel. Thes are all dual-lvds panels. Panel Links: [0]: https://simplespec.microtipsusa.com/uploads/spec/datasheetFile/2588/13-101HIEBCAF0-S_V1.1_20221104.pdf [1]: https://simplespec.microtipsusa.com/uploads/spec/datasheetFile/2660/13-103HIEB0GA0-S_V1.0_20211206.pdf [2]: https://lincolntechsolutions.com/wp-content/uploads/2023/04/LCD185-101CTL1ARNTT_DS_R1.3.pdfSigned-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240515095133.745492-4-a-bhatia1@ti.comSigned-off-by:
-
Aradhya Bhatia authored
Add document vendor prefix for Lincoln Technology Solutions (lincolntech). Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20240515095133.745492-3-a-bhatia1@ti.comSigned-off-by:
-
Aradhya Bhatia authored
Add document vendor prefix for Microtips Technology USA (microtips). Signed-off-by:
-
Douglas Anderson authored
Consensus on the mailing lists is that panels shouldn't use a table of init commands but should instead use init functions. We'll use the same concepts as the recently introduced mipi_dsi_generic_write_seq_multi() to make this clean/easy and also not bloat the driver too much. Measuring before/after this change: $ scripts/bloat-o-meter \ .../before/panel-innolux-p079zca.ko \ .../after/panel-innolux-p079zca.ko add/remove: 3/2 grow/shrink: 0/1 up/down: 2356/-1944 (412) Function old new delta innolux_p097pfg_init - 1772 +1772 innolux_p097pfg_init.d - 480 +480 innolux_panel_write_multi - 104 +104 innolux_panel_prepare 412 308 -104 .compoundliteral 480 - -480 innolux_p097pfg_init_cmds 1360 - -1360 Total: Before=5802, After=6214, chg +7.10% Note that, unlike some other drivers, we actually make this panel driver _bigger_ by using the new functions. This is because the innolux-p079zca panel driver didn't have as complex of a table and thus the old table was more efficient than the code. The bloat is still not giant (only 412 bytes). Also note that we can't direclty use mipi_dsi_generic_write_seq_multi() here because we need to deal with the crazy "nop" that this driver sends after all commands. This means that we have to write code that is "inspired" by the new macros. Since we're touching all the tables, let's also convert hex numbers to lower case as per kernel conventions. Reviewed-by:
-
Douglas Anderson authored
Consensus on the mailing lists is that panels shouldn't use a table of init commands but should instead use init functions. With the recently introduced mipi_dsi_dcs_write_seq_multi() this is not only clean/easy but also saves space. Measuring before/after this change: $ scripts/bloat-o-meter \ .../before/panel-ilitek-ili9882t.ko \ .../after/panel-ilitek-ili9882t.ko add/remove: 3/2 grow/shrink: 0/2 up/down: 6834/-8177 (-1343) Function old new delta starry_ili9882t_init - 6152 +6152 starry_ili9882t_init.d - 678 +678 ili9882t_disable.d - 4 +4 ili9882t_disable 260 228 -32 ili9882t_prepare 540 396 -144 .compoundliteral 681 - -681 starry_ili9882t_init_cmd 7320 - -7320 Total: Before=11928, After=10585, chg -11.26% Let's do the conversion. Since we're touching all the tables, let's also convert hex numbers to lower case as per kernel conventions. Reviewed-by:
-
Douglas Anderson authored
Consensus on the mailing lists is that panels shouldn't use a table of init commands but should instead use init functions. With the recently introduced mipi_dsi_dcs_write_seq_multi() this is not only clean/easy but also saves space. Measuring before/after this change: $ scripts/bloat-o-meter \ .../before/panel-boe-tv101wum-nl6.ko \ .../after/panel-boe-tv101wum-nl6.ko add/remove: 14/8 grow/shrink: 0/1 up/down: 27062/-31433 (-4371) Function old new delta inx_hj110iz_init - 7040 +7040 boe_tv110c9m_init - 6440 +6440 boe_init - 5916 +5916 starry_qfh032011_53g_init - 1944 +1944 starry_himax83102_j02_init - 1228 +1228 inx_hj110iz_init.d - 1040 +1040 boe_tv110c9m_init.d - 982 +982 auo_b101uan08_3_init - 944 +944 boe_init.d - 580 +580 starry_himax83102_j02_init.d - 512 +512 starry_qfh032011_53g_init.d - 180 +180 auo_kd101n80_45na_init - 172 +172 auo_b101uan08_3_init.d - 82 +82 auo_kd101n80_45na_init.d - 2 +2 auo_kd101n80_45na_init_cmd 144 - -144 boe_panel_prepare 592 440 -152 auo_b101uan08_3_init_cmd 1056 - -1056 starry_himax83102_j02_init_cmd 1392 - -1392 starry_qfh032011_53g_init_cmd 2256 - -2256 .compoundliteral 3393 - -3393 boe_init_cmd 7008 - -7008 boe_tv110c9m_init_cmd 7656 - -7656 inx_hj110iz_init_cmd 8376 - -8376 Total: Before=37297, After=32926, chg -11.72% Let's do the conversion. Since we're touching all the tables, let's also convert hex numbers to lower case as per kernel conventions. Reviewed-by:
-
Douglas Anderson authored
This is a mechanical conversion of the novatek-nt36672e driver to use the new mipi_dsi_dcs_write_seq_multi(). The new function is easier for clients to understand and using it also causes smaller code to be generated. Specifically: $ scripts/bloat-o-meter \ ...after/panel-novatek-nt36672e.ko \ ...ctx/panel-novatek-nt36672e.ko add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-988 (-988) Function old new delta nt36672e_1080x2408_60hz_init 6236 5248 -988 Total: Before=10651, After=9663, chg -9.28% Cc: Ritesh Kumar <quic_riteshk@quicinc.com> Reviewed-by:
-
Douglas Anderson authored
The current mipi_dsi_*_write_seq() macros are non-intutitive because they contain a hidden "return" statement that will return out of the _caller_ of the macro. Let's mark them as deprecated and instead introduce some new macros that are more intuitive. These new macros are less optimal when an error occurs but should behave more optimally when there is no error. Specifically these new macros cause smaller code to get generated and the code size savings (less to fetch from RAM, less cache space used, less RAM used) are important. Since the error case isn't something we need to optimize for and these new macros are easier to understand and more flexible, they should be used. After converting to use these new functions, one example shows some nice savings while also being easier to understand. $ scripts/bloat-o-meter \ ...after/panel-novatek-nt36672e.ko \ ...ctx/panel-novatek-nt36672e.ko add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-988 (-988) Function old new delta nt36672e_1080x2408_60hz_init 6236 5248 -988 Total: Before=10651, After=9663, chg -9.28% Reviewed-by:
-
Douglas Anderson authored
Through a cooperative effort between Hsin-Yi Wang and Dmitry Baryshkov, we have realized the dev_err() in the mipi_dsi_*_write_seq() macros was causing quite a bit of bloat to the kernel. Let's hoist this call into drm_mipi_dsi.c by adding a "chatty" version of the functions that includes the print. While doing this, add a bit more comments to these macros making it clear that they print errors and also that they return out of _the caller's_ function. Without any changes to clients this gives a nice savings. Specifically the macro was inlined and thus the error report call was inlined into every call to mipi_dsi_dcs_write_seq() and mipi_dsi_generic_write_seq(). By using a call to a "chatty" function, the usage is reduced to one call in the chatty function and a function call at the invoking site. Building with my build system shows one example: $ scripts/bloat-o-meter \ .../before/panel-novatek-nt36672e.ko \ .../after/panel-novatek-nt36672e.ko add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-4404 (-4404) Function old new delta nt36672e_1080x2408_60hz_init 10640 6236 -4404 Total: Before=15055, After=10651, chg -29.25% Note that given the change in location of the print it's harder to include the "cmd" in the printout for mipi_dsi_dcs_write_seq() since, theoretically, someone could call the new chatty function with a zero-size array and it would be illegal to dereference data[0]. There's a printk format to print the whole buffer and this is probably more useful for debugging anyway. Given that we're doing this for mipi_dsi_dcs_write_seq(), let's also print the buffer for mipi_dsi_generic_write_seq() in the error case. It should be noted that the current consensus of DRM folks is that the mipi_dsi_*_write_seq() should be deprecated due to the non-intuitive return behavior. A future patch will formally mark them as deprecated and provide an alternative. Reviewed-by:
-
Douglas Anderson authored
We really don't expect these errors to be printed over and over again. When a driver hits the error it should bail out. Just use a normal error print. This gives a nice space savings for users of these functions: $ scripts/bloat-o-meter \ .../before/panel-novatek-nt36672e.ko \ .../after/panel-novatek-nt36672e.ko add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-16760 (-16760) Function old new delta nt36672e_1080x2408_60hz_init 17080 10640 -6440 nt36672e_1080x2408_60hz_init._rs 10320 - -10320 Total: Before=31815, After=15055, chg -52.68% Reviewed-by:
-
Douglas Anderson authored
The mipi_dsi_generic_write_seq() macro makes a call to mipi_dsi_generic_write() which returns a type ssize_t. The macro then stores it in an int and checks to see if it's negative. This could theoretically be a problem if "ssize_t" is larger than "int". To see the issue, imagine that "ssize_t" is 32-bits and "int" is 16-bits, you could see a problem if there was some code out there that looked like: mipi_dsi_generic_write_seq(dsi, <32768 bytes as arguments>); ...since we'd get back that 32768 bytes were transferred and 32768 stored in a 16-bit int would look negative. Though there are no callsites where we'd actually hit this (even if "int" was only 16-bit), it's cleaner to make the types match so let's fix it. Fixes: a9015ce5 ("drm/mipi-dsi: Add a mipi_dsi_dcs_write_seq() macro") Reviewed-by:
-
Douglas Anderson authored
The mipi_dsi_dcs_write_seq() macro makes a call to mipi_dsi_dcs_write_buffer() which returns a type ssize_t. The macro then stores it in an int and checks to see if it's negative. This could theoretically be a problem if "ssize_t" is larger than "int". To see the issue, imagine that "ssize_t" is 32-bits and "int" is 16-bits, you could see a problem if there was some code out there that looked like: mipi_dsi_dcs_write_seq(dsi, cmd, <32767 bytes as arguments>); ...since we'd get back that 32768 bytes were transferred and 32768 stored in a 16-bit int would look negative. Though there are no callsites where we'd actually hit this (even if "int" was only 16-bit), it's cleaner to make the types match so let's fix it. Fixes: 2a9e9daf ("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro") Reviewed-by:
-
Thomas Zimmermann authored
Call fb_deferred_io_cleanup() upon destroying the framebuffer device. Releases the internal memory. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240507152329.3085-1-tzimmermann@suse.de
-
Thomas Zimmermann authored
Call fb_deferred_io_cleanup() upon destroying the framebuffer device. Releases the internal memory. Signed-off-by:
-
