Commits · 511a1b8a4c816a4e46a0d0aea9221ff3c708282e · Kirill Smelkov / linux

18 Jun, 2015 2 commits

[media] Revert "[media] vb2: Push mmap_sem down to memops" · 511a1b8a

Hans Verkuil authored Jun 15, 2015

This reverts commit 48b25a3a.

That commit caused two regressions. The first is a BUG:

Jun 14 18:42:15 test-media kernel: [ 115.972299] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100
Jun 14 18:42:15 test-media kernel: [ 115.972307] IP: [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972316] PGD 0
Jun 14 18:42:15 test-media kernel: [ 115.972318] Oops: 0000 [#1] PREEMPT SMP
Jun 14 18:42:15 test-media kernel: [ 115.972321] Modules linked in: vivid v4l2_dv_timings videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media vmw_balloon vmw_vmci acpi_cpufreq processor button
Jun 14 18:42:15 test-media kernel: [ 115.972333] CPU: 0 PID: 1542 Comm: v4l2-ctl Not tainted 4.1.0-rc3-test-media #1190
Jun 14 18:42:15 test-media kernel: [ 115.972336] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
Jun 14 18:42:15 test-media kernel: [ 115.972337] task: ffff880220ce4200 ti: ffff88021d16c000 task.ti: ffff88021d16c000
Jun 14 18:42:15 test-media kernel: [ 115.972339] RIP: 0010:[<ffffffff810d5cd0>] [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972342] RSP: 0018:ffff88021d16f9b8 EFLAGS: 00010002
Jun 14 18:42:15 test-media kernel: [ 115.972343] RAX: 0000000000000046 RBX: 0000000000000292 RCX: 0000000000000001
Jun 14 18:42:15 test-media kernel: [ 115.972345] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000100
Jun 14 18:42:15 test-media kernel: [ 115.972346] RBP: ffff88021d16fa88 R08: 0000000000000001 R09: 0000000000000000
Jun 14 18:42:15 test-media kernel: [ 115.972347] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001
Jun 14 18:42:15 test-media kernel: [ 115.972348] R13: ffff880220ce4200 R14: 0000000000000100 R15: 0000000000000000
Jun 14 18:42:15 test-media kernel: [ 115.972350] FS: 00007f2441e7f740(0000) GS:ffff880236e00000(0000) knlGS:0000000000000000
Jun 14 18:42:15 test-media kernel: [ 115.972351] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Jun 14 18:42:15 test-media kernel: [ 115.972353] CR2: 0000000000000100 CR3: 0000000001e0b000 CR4: 00000000001406f0
Jun 14 18:42:15 test-media kernel: [ 115.972424] Stack:
Jun 14 18:42:15 test-media kernel: [ 115.972427] ffff88021d16fa98 ffffffff810d6543 0000000000000006 0000000000000246
Jun 14 18:42:15 test-media kernel: [ 115.972431] ffff88021d16fa08 ffffffff810d532d ffff880220ce4a78 ffff880200000000
Jun 14 18:42:15 test-media kernel: [ 115.972433] ffff880200000001 0000000000000000 0000000000000001 000000000093a4a0
Jun 14 18:42:15 test-media kernel: [ 115.972436] Call Trace:
Jun 14 18:42:15 test-media kernel: [ 115.972440] [<ffffffff810d6543>] ? __lock_acquire+0xb63/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972443] [<ffffffff810d532d>] ? mark_held_locks+0x6d/0xa0
Jun 14 18:42:15 test-media kernel: [ 115.972445] [<ffffffff810d37a8>] ? __lock_is_held+0x58/0x80
Jun 14 18:42:15 test-media kernel: [ 115.972447] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:42:15 test-media kernel: [ 115.972452] [<ffffffffa039f1f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:42:15 test-media kernel: [ 115.972458] [<ffffffff819b1a92>] down_read+0x42/0x60
Jun 14 18:42:15 test-media kernel: [ 115.972460] [<ffffffffa039f1f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:42:15 test-media kernel: [ 115.972463] [<ffffffff819af1b1>] ? mutex_lock_nested+0x2b1/0x560
Jun 14 18:42:15 test-media kernel: [ 115.972467] [<ffffffffa038fdc5>] ? vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972469] [<ffffffffa039f1f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:42:15 test-media kernel: [ 115.972472] [<ffffffffa038b626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972475] [<ffffffffa038fdd3>] vb2_queue_release+0x33/0x40 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972478] [<ffffffffa038fe75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972481] [<ffffffffa038feb9>] vb2_fop_release+0x29/0x50 [videobuf2_core]
Jun 14 18:42:15 test-media kernel: [ 115.972485] [<ffffffffa03ad372>] vivid_fop_release+0x92/0x230 [vivid]
Jun 14 18:42:15 test-media kernel: [ 115.972491] [<ffffffffa0358460>] v4l2_release+0x30/0x80 [videodev]
Jun 14 18:42:15 test-media kernel: [ 115.972496] [<ffffffff811a51d5>] __fput+0xe5/0x200
Jun 14 18:42:15 test-media kernel: [ 115.972498] [<ffffffff811a5339>] ____fput+0x9/0x10
Jun 14 18:42:15 test-media kernel: [ 115.972501] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0
Jun 14 18:42:15 test-media kernel: [ 115.972504] [<ffffffff8108c670>] do_exit+0x3a0/0xaf0
Jun 14 18:42:15 test-media kernel: [ 115.972507] [<ffffffff819b3a9b>] ? _raw_spin_unlock_irq+0x2b/0x60
Jun 14 18:42:15 test-media kernel: [ 115.972509] [<ffffffff8108e0ff>] do_group_exit+0x4f/0xe0
Jun 14 18:42:15 test-media kernel: [ 115.972511] [<ffffffff8109a170>] get_signal+0x200/0x8c0
Jun 14 18:42:15 test-media kernel: [ 115.972514] [<ffffffff819b14b5>] ? __mutex_unlock_slowpath+0xf5/0x240
Jun 14 18:42:15 test-media kernel: [ 115.972518] [<ffffffff81002593>] do_signal+0x23/0x820
Jun 14 18:42:15 test-media kernel: [ 115.972521] [<ffffffff819b1609>] ? mutex_unlock+0x9/0x10
Jun 14 18:42:15 test-media kernel: [ 115.972524] [<ffffffffa0358648>] ? v4l2_ioctl+0x78/0xf0 [videodev]
Jun 14 18:42:15 test-media kernel: [ 115.972526] [<ffffffff819b4653>] ? int_very_careful+0x5/0x46
Jun 14 18:42:15 test-media kernel: [ 115.972529] [<ffffffff810d54bd>] ? trace_hardirqs_on_caller+0x15d/0x200
Jun 14 18:42:15 test-media kernel: [ 115.972531] [<ffffffff81002de0>] do_notify_resume+0x50/0x60
Jun 14 18:42:15 test-media kernel: [ 115.972533] [<ffffffff819b46a6>] int_signal+0x12/0x17
Jun 14 18:42:15 test-media kernel: [ 115.972534] Code: ca 81 31 c0 e8 7a e2 8c 00 e8 aa 1d 8d 00 0f 1f 44 00 00 31 db 48 81 c4 a8 00 00 00 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 90 <49> 81 3e 40 4e 02 82 b8 00 00 00 00 44 0f 44 e0 41 83 ff 01 0f
Jun 14 18:42:15 test-media kernel: [ 115.972567] RIP [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070
Jun 14 18:42:15 test-media kernel: [ 115.972569] RSP <ffff88021d16f9b8>
Jun 14 18:42:15 test-media kernel: [ 115.972570] CR2: 0000000000000100
Jun 14 18:42:15 test-media kernel: [ 115.972573] ---[ end trace 25595c2b8560cb57 ]---
Jun 14 18:42:15 test-media kernel: [ 115.972575] Fixing recursive fault but reboot is needed!

This can be reproduced by loading the vivid driver and running:

v4l2-ctl --stream-user

and pressing Ctrl-C. You may have to try a few times, but in my experience this BUG
is triggered quite quickly.

The second is a possible deadlock:

Jun 14 18:44:07 test-media kernel: [ 49.376650] ======================================================
Jun 14 18:44:07 test-media kernel: [ 49.376651] [ INFO: possible circular locking dependency detected ]
Jun 14 18:44:07 test-media kernel: [ 49.376653] 4.1.0-rc3-test-media #1190 Not tainted
Jun 14 18:44:07 test-media kernel: [ 49.376654] -------------------------------------------------------
Jun 14 18:44:07 test-media kernel: [ 49.376655] v4l2-compliance/1468 is trying to acquire lock:
Jun 14 18:44:07 test-media kernel: [ 49.376657] (&mm->mmap_sem){++++++}, at: [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376665]
Jun 14 18:44:07 test-media kernel: [ 49.376665] but task is already holding lock:
Jun 14 18:44:07 test-media kernel: [ 49.376666] (&q->mmap_lock){+.+...}, at: [<ffffffffa0398dc5>] vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376670]
Jun 14 18:44:07 test-media kernel: [ 49.376670] which lock already depends on the new lock.
Jun 14 18:44:07 test-media kernel: [ 49.376670]
Jun 14 18:44:07 test-media kernel: [ 49.376671]
Jun 14 18:44:07 test-media kernel: [ 49.376671] the existing dependency chain (in reverse order) is:
Jun 14 18:44:07 test-media kernel: [ 49.376672]
Jun 14 18:44:07 test-media kernel: [ 49.376672] -> #1 (&q->mmap_lock){+.+...}:
Jun 14 18:44:07 test-media kernel: [ 49.376675] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:44:07 test-media kernel: [ 49.376682] [<ffffffff819aef5e>] mutex_lock_nested+0x5e/0x560
Jun 14 18:44:07 test-media kernel: [ 49.376689] [<ffffffffa03934a2>] vb2_mmap+0x232/0x350 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376691] [<ffffffffa0395a60>] vb2_fop_mmap+0x20/0x30 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376694] [<ffffffffa0361102>] v4l2_mmap+0x52/0x90 [videodev]
Jun 14 18:44:07 test-media kernel: [ 49.376698] [<ffffffff81177e33>] mmap_region+0x3b3/0x5e0
Jun 14 18:44:07 test-media kernel: [ 49.376701] [<ffffffff81178377>] do_mmap_pgoff+0x317/0x400
Jun 14 18:44:07 test-media kernel: [ 49.376703] [<ffffffff81165320>] vm_mmap_pgoff+0x90/0xc0
Jun 14 18:44:07 test-media kernel: [ 49.376708] [<ffffffff81176867>] SyS_mmap_pgoff+0x1d7/0x280
Jun 14 18:44:07 test-media kernel: [ 49.376709] [<ffffffff81007f8d>] SyS_mmap+0x1d/0x20
Jun 14 18:44:07 test-media kernel: [ 49.376714] [<ffffffff819b44ae>] system_call_fastpath+0x12/0x76
Jun 14 18:44:07 test-media kernel: [ 49.376716]
Jun 14 18:44:07 test-media kernel: [ 49.376716] -> #0 (&mm->mmap_sem){++++++}:
Jun 14 18:44:07 test-media kernel: [ 49.376718] [<ffffffff810d79b3>] __lock_acquire+0x1fd3/0x2070
Jun 14 18:44:07 test-media kernel: [ 49.376720] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:44:07 test-media kernel: [ 49.376721] [<ffffffff819b1a92>] down_read+0x42/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376723] [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376725] [<ffffffffa0394626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376727] [<ffffffffa0398dd3>] vb2_queue_release+0x33/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376729] [<ffffffffa0398e75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376731] [<ffffffffa0398eb9>] vb2_fop_release+0x29/0x50 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376733] [<ffffffffa03b6372>] vivid_fop_release+0x92/0x230 [vivid]
Jun 14 18:44:07 test-media kernel: [ 49.376737] [<ffffffffa0361460>] v4l2_release+0x30/0x80 [videodev]
Jun 14 18:44:07 test-media kernel: [ 49.376739] [<ffffffff811a51d5>] __fput+0xe5/0x200
Jun 14 18:44:07 test-media kernel: [ 49.376744] [<ffffffff811a5339>] ____fput+0x9/0x10
Jun 14 18:44:07 test-media kernel: [ 49.376746] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0
Jun 14 18:44:07 test-media kernel: [ 49.376749] [<ffffffff81002dd1>] do_notify_resume+0x41/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376752] [<ffffffff819b46a6>] int_signal+0x12/0x17
Jun 14 18:44:07 test-media kernel: [ 49.376754]
Jun 14 18:44:07 test-media kernel: [ 49.376754] other info that might help us debug this:
Jun 14 18:44:07 test-media kernel: [ 49.376754]
Jun 14 18:44:07 test-media kernel: [ 49.376755] Possible unsafe locking scenario:
Jun 14 18:44:07 test-media kernel: [ 49.376755]
Jun 14 18:44:07 test-media kernel: [ 49.376756] CPU0 CPU1
Jun 14 18:44:07 test-media kernel: [ 49.376757] ---- ----
Jun 14 18:44:07 test-media kernel: [ 49.376758] lock(&q->mmap_lock);
Jun 14 18:44:07 test-media kernel: [ 49.376759] lock(&mm->mmap_sem);
Jun 14 18:44:07 test-media kernel: [ 49.376760] lock(&q->mmap_lock);
Jun 14 18:44:07 test-media kernel: [ 49.376761] lock(&mm->mmap_sem);
Jun 14 18:44:07 test-media kernel: [ 49.376763]
Jun 14 18:44:07 test-media kernel: [ 49.376763] *** DEADLOCK ***
Jun 14 18:44:07 test-media kernel: [ 49.376763]
Jun 14 18:44:07 test-media kernel: [ 49.376764] 2 locks held by v4l2-compliance/1468:
Jun 14 18:44:07 test-media kernel: [ 49.376765] #0: (&dev->mutex#3){+.+.+.}, at: [<ffffffffa0398e0a>] _vb2_fop_release+0x2a/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376770] #1: (&q->mmap_lock){+.+...}, at: [<ffffffffa0398dc5>] vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376773]
Jun 14 18:44:07 test-media kernel: [ 49.376773] stack backtrace:
Jun 14 18:44:07 test-media kernel: [ 49.376776] CPU: 2 PID: 1468 Comm: v4l2-compliance Not tainted 4.1.0-rc3-test-media #1190
Jun 14 18:44:07 test-media kernel: [ 49.376777] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
Jun 14 18:44:07 test-media kernel: [ 49.376779] ffffffff8279e0b0 ffff88021d6f7ba8 ffffffff819a7aac 0000000000000011
Jun 14 18:44:07 test-media kernel: [ 49.376781] ffffffff8279e0b0 ffff88021d6f7bf8 ffffffff819a3964 ffff88021d6f7bd8
Jun 14 18:44:07 test-media kernel: [ 49.376783] ffff8800ac8aa100 0000000000000002 ffff8800ac8aa9a0 0000000000000002
Jun 14 18:44:07 test-media kernel: [ 49.376785] Call Trace:
Jun 14 18:44:07 test-media kernel: [ 49.376788] [<ffffffff819a7aac>] dump_stack+0x4f/0x7b
Jun 14 18:44:07 test-media kernel: [ 49.376792] [<ffffffff819a3964>] print_circular_bug+0x20f/0x251
Jun 14 18:44:07 test-media kernel: [ 49.376793] [<ffffffff810d79b3>] __lock_acquire+0x1fd3/0x2070
Jun 14 18:44:07 test-media kernel: [ 49.376795] [<ffffffff810d6543>] ? __lock_acquire+0xb63/0x2070
Jun 14 18:44:07 test-media kernel: [ 49.376797] [<ffffffff810d37a8>] ? __lock_is_held+0x58/0x80
Jun 14 18:44:07 test-media kernel: [ 49.376798] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0
Jun 14 18:44:07 test-media kernel: [ 49.376800] [<ffffffffa03a81f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376802] [<ffffffff819b1a92>] down_read+0x42/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376803] [<ffffffffa03a81f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376805] [<ffffffff819af1b1>] ? mutex_lock_nested+0x2b1/0x560
Jun 14 18:44:07 test-media kernel: [ 49.376807] [<ffffffffa0398dc5>] ? vb2_queue_release+0x25/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376808] [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc]
Jun 14 18:44:07 test-media kernel: [ 49.376810] [<ffffffffa0398e0a>] ? _vb2_fop_release+0x2a/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376812] [<ffffffffa0394626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376814] [<ffffffffa0398dd3>] vb2_queue_release+0x33/0x40 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376816] [<ffffffffa0398e75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376818] [<ffffffffa0398eb9>] vb2_fop_release+0x29/0x50 [videobuf2_core]
Jun 14 18:44:07 test-media kernel: [ 49.376820] [<ffffffffa03b6372>] vivid_fop_release+0x92/0x230 [vivid]
Jun 14 18:44:07 test-media kernel: [ 49.376822] [<ffffffffa0361460>] v4l2_release+0x30/0x80 [videodev]
Jun 14 18:44:07 test-media kernel: [ 49.376824] [<ffffffff811a51d5>] __fput+0xe5/0x200
Jun 14 18:44:07 test-media kernel: [ 49.376825] [<ffffffff819b4653>] ? int_very_careful+0x5/0x46
Jun 14 18:44:07 test-media kernel: [ 49.376827] [<ffffffff811a5339>] ____fput+0x9/0x10
Jun 14 18:44:07 test-media kernel: [ 49.376828] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0
Jun 14 18:44:07 test-media kernel: [ 49.376830] [<ffffffff81002dd1>] do_notify_resume+0x41/0x60
Jun 14 18:44:07 test-media kernel: [ 49.376832] [<ffffffff819b46a6>] int_signal+0x12/0x17

This can be triggered by loading the vivid module with the module option 'no_error_inj=1'
and running 'v4l2-compliance -s5'. Again, it may take a few attempts to trigger this
but for me it happens quite quickly.

Without this patch I cannot reproduce these two issues. So reverting is the best
solution for now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

511a1b8a

[media] mantis: cleanup a warning · 6fe2d69c

Mauro Carvalho Chehab authored Jun 18, 2015

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/pci/mantis/mantis_i2c.c: In function 'mantis_i2c_init':
drivers/media/pci/mantis/mantis_i2c.c:222:15: warning: variable 'intmask' set but not used [-Wunused-but-set-variable]
u32 intstat, intmask;

6fe2d69c

11 Jun, 2015 1 commit

[media] bdisp-debug: don't try to divide by s64 · 82d229cd

Mauro Carvalho Chehab authored Jun 10, 2015

There are several warnings there, on some architectures, related
to dividing a s32 by a s64 value:

drivers/media/platform/sti/bdisp/bdisp-debug.c:594: warning: comparison of distinct pointer types lacks a cast
drivers/media/platform/sti/bdisp/bdisp-debug.c:594: warning: right shift count >= width of type
drivers/media/platform/sti/bdisp/bdisp-debug.c:594: warning: passing argument 1 of '__div64_32' from incompatible pointer type
drivers/media/platform/sti/bdisp/bdisp-debug.c:595: warning: comparison of distinct pointer types lacks a cast
drivers/media/platform/sti/bdisp/bdisp-debug.c:595: warning: right shift count >= width of type
drivers/media/platform/sti/bdisp/bdisp-debug.c:595: warning: passing argument 1 of '__div64_32' from incompatible pointer type CC [M] drivers/media/tuners/mt2060.o
drivers/media/platform/sti/bdisp/bdisp-debug.c:596: warning: comparison of distinct pointer types lacks a cast
drivers/media/platform/sti/bdisp/bdisp-debug.c:596: warning: right shift count >= width of type
drivers/media/platform/sti/bdisp/bdisp-debug.c:596: warning: passing argument 1 of '__div64_32' from incompatible pointer type
drivers/media/platform/sti/bdisp/bdisp-debug.c:597: warning: comparison of distinct pointer types lacks a cast
drivers/media/platform/sti/bdisp/bdisp-debug.c:597: warning: right shift count >= width of type
drivers/media/platform/sti/bdisp/bdisp-debug.c:597: warning: passing argument 1 of '__div64_32' from incompatible pointer type

That doesn't make much sense. What the driver is actually trying
to do is to divide one second by a value. So, check the range
before dividing. That warrants the right result and will remove
the warnings on non-64 bits archs.

Also fixes this warning:
drivers/media/platform/sti/bdisp/bdisp-debug.c:588: warning: comparison of distinct pointer types lacks a cast

by using div64_s64() instead of calling do_div() directly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

82d229cd

10 Jun, 2015 32 commits

[media] cx88: don't declare restart_video_queue if not used · bc5e66bd

Mauro Carvalho Chehab authored Jun 10, 2015

While compiled on alpha, got this error:
drivers/media/pci/cx88/cx88-video.c:415:12: warning: 'restart_video_queue' defined but not used [-Wunused-function]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

bc5e66bd

[media] au0828: move dev->boards atribuition to happen earlier · e42c8c6e

Rafael Lourenço de Lima Chehab authored Jun 08, 2015

The attribution of dev->boards occured too late, which
would couse an OOPS in media controller registration.
Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

e42c8c6e

[media] lmedm04: implement dvb v5 statistics · 48c91aad

Malcolm Priestley authored Jun 08, 2015

Indroduce function lme2510_update_stats to update
statistics directly from usb interrupt.

Provide signal and snr wrap rounds for dvb v3 functions.

Block and post bit are not available.

When i2c_talk_onoff is on no statistics are available,
with possible future hand over to the relevant frontend/tuner.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

48c91aad

[media] bdisp: remove unused var · baa1fb50

Mauro Carvalho Chehab authored Jun 10, 2015

Fix the following warning:

drivers/media/platform/sti/bdisp/bdisp-v4l2.c: In function 'bdisp_register_device':
drivers/media/platform/sti/bdisp/bdisp-v4l2.c:1024:26: warning: variable 'pdev' set but not used [-Wunused-but-set-variable]
struct platform_device *pdev;
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

baa1fb50

[media] bdisp: remove needless check · 1a8b18af

Fabien Dessenne authored Jun 10, 2015

As reported by smatch:
drivers/media/platform/sti/bdisp/bdisp-v4l2.c:947 bdisp_s_selection() warn: unsigned 'out.width' is never less than zero.
drivers/media/platform/sti/bdisp/bdisp-v4l2.c:947 bdisp_s_selection() warn: unsigned 'out.height' is never less than zero.
Indeed, width and height are unsigned.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

1a8b18af

ts2020: fix compilation on i386 · 87b09bd0

Mauro Carvalho Chehab authored Jun 10, 2015

drivers/built-in.o: In function `ts2020_read_signal_strength':
ts2020.c:(.text+0x298ff94): undefined reference to `__divdi3'
ts2020.c:(.text+0x298ffd4): undefined reference to `__divdi3'
ts2020.c:(.text+0x298fffd): undefined reference to `__divdi3'
Makefile:921: recipe for target 'vmlinux' failed
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

87b09bd0

[media] mantis: cleanup CodingStyle issues due to last commit · 9d605e63

Mauro Carvalho Chehab authored Jun 10, 2015

Commit a96762da('[media] mantis: add remote control support')
introduced some new CodingStyle issues. Fix them.

No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

9d605e63

[media] mantis: add remote control support · a96762da

Jan Klötzke authored Jun 06, 2015

The embedded UART is apparently used to receive decoded IR (RC5?) codes.
Forward these scan codes to the RC framework and (where known) add
corresponding mapping tables to translate them into regular keys.

This patch has been tested on a TechniSat CableStar HD2. The mappings of other
rc-maps were taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/) and the s2-liplianin repository. The
major difference to Christoph's patch is a reworked interrupt handling of the
UART because the RX interrupt is apparently level triggered and requires
masking until the FIFO is read by the UART worker.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

a96762da

[media] rc/keymaps: add keytable for Twinhan DTV CAB CI · 1c35cf9c

Jan Klötzke authored Jun 06, 2015

This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

1c35cf9c

[media] rc/keymaps: add keytable for Terratec Cinergy S2 HD · 578e95dd

Jan Klötzke authored Jun 06, 2015

This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

578e95dd

[media] rc/keymaps: add keytable for Terratec Cinergy C PCI · 4862690d

Jan Klötzke authored Jun 06, 2015

This RC map was taken from Christoph Pinkl's patch
(http://patchwork.linuxtv.org/patch/7217/). It is used solely by the respective
mantis based card because the encoding is not known.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

4862690d

[media] rc/keymaps: add RC keytable for TechniSat TS35 · 9b6a065e

Jan Klötzke authored Jun 06, 2015

The TS35 remote is distributed with TechniSat CableStar HD2 cards (mantis
chipset). The exact protocol type is unknown, making this rc map probably only
usable by mantis cards.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

9b6a065e

[media] dvb-core: prevent some corruption the legacy ioctl · 8d7e5063

Dan Carpenter authored Jun 06, 2015

Quite a few of the ->diseqc_send_master_cmd() implementations don't
check cmd->msg_len so it can lead to memory corruption.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

8d7e5063

[media] saa7164: Improvements for I2C handling" · 5dce1ee6

Olli Salonen authored Jun 06, 2015

This reverts commit ad90b6b0.

This patch breaks I2C communication towards Si2168. After reverting and
applying the other patch in this series the I2C communication is
correct.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

5dce1ee6

[media] saa7164: change Si2168 reglen to 0 bit · d9768728

Olli Salonen authored Jun 06, 2015

The i2c_reg_len for Si2168 should be 0 for correct I2C communication.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

d9768728

[media] s5k5baf: Convert use of __constant_cpu_to_be16 to cpu_to_be16 · 555416f9

Vaishali Thakkar authored Jun 05, 2015

In little endian cases, macro cpu_to_be16 unfolds to __swab16 which
provides special case for constants. In big endian cases,
__constant_cpu_to_be16 and cpu_to_be16 expand directly to the
same expression. So, replace __constant_cpu_to_be16 with
cpu_to_be16 with the goal of getting rid of the definition of
__constant_cpu_to_be16 completely.

The semantic patch that performs this transformation is as follows:

@@expression x;@@

- __constant_cpu_to_be16(x)
+ cpu_to_be16(x)
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

555416f9

[media] lmedm04: Enable dont_poll for TS2020 tuner · 9e8715c9

Malcolm Priestley authored Jun 05, 2015

Following a change made to TS2020 tuner in patches
ts2020: Provide DVBv5 API signal strength
ts2020: Allow stats polling to be suppressed

Polling on the driver must be suppressed because
the demuxer is stopped by I2C messages.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

9e8715c9

[media] ts2020: Allow stats polling to be suppressed · c7275ae1

David Howells authored Jun 03, 2015

Statistics polling can not be done by lmedm04 driver's implementation of
M88RS2000/TS2020 because I2C messages stop the device's demuxer, so allow
polling for statistics to be suppressed in the ts2020 driver by setting
dont_poll in the ts2020_config struct.
Reported-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

c7275ae1

[media] ts2020: Copy loop_through from the config to the internal data · 0f20baad

David Howells authored Jun 03, 2015

Copy the loop_through setting from the ts2020_config struct to the internal
ts2020_priv struct so that it can actually be used.

Whilst we're at it, group the bitfields together in the same order in both
structs so that the compiler has a good chance to copy them in one go.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

0f20baad

[media] ts2020: Provide DVBv5 API signal strength · 3366cd5d

David Howells authored May 26, 2015

Provide a DVBv5 API signal strength.  This is in units of 0.001 dBm rather
than a percentage.

>From Antti Palosaari's testing with a signal generator, it appears that the
gain calculated according to Montage's specification if negated is a
reasonable representation of the signal strength of the generator.

To this end:

 (1) Polled statistic gathering needed to be implemented in the TS2020 driver.
     This is done in the ts2020_stat_work() function.

 (2) The calculated gain is placed as the signal strength in the
     dtv_property_cache associated with the front end with the scale set to
     FE_SCALE_DECIBEL.

 (3) The DVBv3 format signal strength then needed to be calculated from the
     signal strength stored in the dtv_property_cache rather than accessing
     the value when ts2020_read_signal_strength() is called.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

3366cd5d

[media] TS2020: Calculate tuner gain correctly · 0f91c9d6

David Howells authored May 26, 2015

The TS2020 and TS2022 tuners take an input from the demodulator indicating the
AGC setting on that component that is then used to influence the tuner's own
gain.  This should be taken into account when calculating the gain and signal
strength.

Further, the existing TS2020 driver miscalculates the signal strength as the
result of its calculations can exceed the storage capacity of the 16-bit word
used to return it to userspace.

To this end:

 (1) Add a callback function (->get_agc_pwm()) in the ts2020_config struct that
     the tuner can call to get the AGC PWM value from the demodulator.

 (2) Modify the TS2020 driver to calculate the gain according to Montage's
     specification with the adjustment that we produce a negative value and
     scale it to 0.001dB units (which is what the DVBv5 API will require):

     (a) Callback to the demodulator to retrieve the AGC PWM value and then
     	 turn that into Vagc for incorporation in the calculations.  If the
     	 callback is unset, assume a Vagc of 0.

     (b) Calculate the tuner gain from a combination of Vagc and the tuner's RF
     	 gain and baseband gain settings.

 (3) Turn this into a percentage signal strength as per Montage's
     specification for return to userspace with the DVBv3 API.

 (4) Provide a function in the M88DS3103 demodulator driver that can be used to
     get the AGC PWM value on behalf of the tuner.

 (5) The ts2020_config.get_agc_pwm function should be set by the code that
     stitches together the drivers for each card.

     For the DVBSky cards that use the M88DS3103 with the TS2020 or the TS2022,
     set the get_agc_pwm function to point to m88ds3103_get_agc_pwm.

I have tested this with a DVBSky S952 card which has an M88DS3103 and a TS2022.

Thanks to Montage for providing access to information about the workings of
these parts.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

0f91c9d6

[media] em28xx: PCTV 461e use I2C client for demod and SEC · 76b91be3

Antti Palosaari authored Apr 16, 2015

Use I2C client binding for demod and SEC.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

76b91be3

[media] m88ds3103: use regmap for I2C register access · 478932b1

Antti Palosaari authored Apr 16, 2015

Use regmap for I2C register access.
Remove own I2C repeated mutex as it should not be needed. I2C adapter
lock is already taken when I2C mux adapter is called, no need for
double locking.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

478932b1

[media] m88ds3103: rename variables and correct logging · 7978b8a1

Antti Palosaari authored Apr 16, 2015

Rename driver state from priv to dev.
Use I2C client for correct logging.
Use adapter and address from I2C client structure where needed.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

7978b8a1

[media] ts2020: Add a comment about lifetime of on-stack pdata in ts2020_attach() · 80868c8e

David Howells authored Apr 02, 2015

ts2020_attach() allocates a variable pdata on the stack and then passes a
pointer to it to i2c_new_device() which stashes the pointer in persistent
structures.

Add a comment to the effect that this isn't actually an error because the
contents of the variable are only used in ts2020_probe() and this is only
called ts2020_attach()'s stack frame exists.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

80868c8e

[media] ts2020: convert to regmap I2C API · f158cbce

Antti Palosaari authored Mar 27, 2015

Use regmap to cover I2C register access.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

f158cbce

[media] ts2020: register I2C driver from legacy media attach · e6ad9ce3

Antti Palosaari authored Mar 26, 2015

Register driver using I2C bindings internally when legacy media
attach is used. That is done by registering driver using I2C binding
from legacy attach. That way we can get valid I2C client, which is
needed for proper dev_() logging and regmap for example even legacy
binding is used.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

e6ad9ce3

[media] ts2020: improve filter limit calc · 2ca58f45

Antti Palosaari authored Mar 26, 2015

* We don't need calculate channel bandwidth from symbol rate as it
is calculated by DVB core.

* Use clamp() to force upper/lower limit of filter 3dB frequency.
Upper limit should never exceeded 40MHz (80MHz BW) in any case,
though...
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

2ca58f45

[media] ts2020: re-implement PLL calculations · af9d5255

Antti Palosaari authored Mar 26, 2015

Used frequency synthesizer is simple Integer-N PLL, with configurable
reference divider, output divider and of course N itself. Old
calculations were working fine, but not so easy to understand.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

af9d5255

[media] cobalt: fix 64-bit division · 95a86e43

Hans Verkuil authored Jun 10, 2015

There are still some 64-bit division problems in the cobalt code.
Replace it by div_u64.

[mchehab@osg.samsung.com: folded with an additional diff sent by
 Hans via a priv e-mail]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

95a86e43

[media] rc: gpio-ir-recv: don't sleep in irq handler · 64657066

Heiko Stübner authored Jun 02, 2015

Don't allow sleep when getting the gpio value in the irq-handler.
On my rk3288 board this results in might_sleep warnings when receiving
data like:

BUG: sleeping function called from invalid context at drivers/gpio/gpiolib.c:1531
in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/0
CPU: 0 PID: 0 Comm: swapper/0 Tainted: P                4.1.0-rc5+ #2011
Hardware name: Rockchip (Device Tree)
[<c00189a0>] (unwind_backtrace) from [<c0013b04>] (show_stack+0x20/0x24)
[<c0013b04>] (show_stack) from [<c0757970>] (dump_stack+0x8c/0xbc)
[<c0757970>] (dump_stack) from [<c0053188>] (___might_sleep+0x238/0x284)
[<c0053188>] (___might_sleep) from [<c0053264>] (__might_sleep+0x90/0xa4)
[<c0053264>] (__might_sleep) from [<c02ff4ac>] (gpiod_get_raw_value_cansleep+0x28/0x44)
[<c02ff4ac>] (gpiod_get_raw_value_cansleep) from [<bf0363c4>] (gpio_ir_recv_irq+0x24/0x6c [gpio_ir_recv])
[<bf0363c4>] (gpio_ir_recv_irq [gpio_ir_recv]) from [<c008a78c>] (handle_irq_event_percpu+0x164/0x550)
[<c008a78c>] (handle_irq_event_percpu) from [<c008abc4>] (handle_irq_event+0x4c/0x6c)
[<c008abc4>] (handle_irq_event) from [<c008df88>] (handle_edge_irq+0x128/0x150)
[<c008df88>] (handle_edge_irq) from [<c0089edc>] (generic_handle_irq+0x30/0x40)
[<c0089edc>] (generic_handle_irq) from [<c02fc4cc>] (rockchip_irq_demux+0x158/0x210)
[<c02fc4cc>] (rockchip_irq_demux) from [<c0089edc>] (generic_handle_irq+0x30/0x40)
[<c0089edc>] (generic_handle_irq) from [<c008a058>] (__handle_domain_irq+0x98/0xc0)
[<c008a058>] (__handle_domain_irq) from [<c00094a4>] (gic_handle_irq+0x4c/0x70)
[<c00094a4>] (gic_handle_irq) from [<c0014684>] (__irq_svc+0x44/0x5c)
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

64657066

[media] dvb-frontend: Replace timeval with ktime_t · 9056a23b

Tina Ruchandani authored May 31, 2015

struct timeval uses a 32-bit seconds representation which will
overflow in the year 2038 and beyond. This patch replaces
the usage of struct timeval with ktime_t which is a 64-bit
timestamp and is year 2038 safe.
This patch is part of a larger attempt to remove all instances
of 32-bit timekeeping variables (timeval, timespec, time_t)
which are not year 2038 safe, from the kernel.

[mchehab@osg.samsung.com: add a missing parenthesis, breaking compilation]
Suggested-by: Arnd Bergmann <arndb@arndb.de>
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

9056a23b

09 Jun, 2015 5 commits

[media] b2c2: Add option to skip the first 6 pid filters · d3525b63

Jemma Denson authored May 30, 2015

The flexcop bridge chip has two banks of hardware pid filters -
an initial 6, and on some chip revisions an additional bank of 32.

A bug is present on the initial 6 - when changing transponders
one of two PAT packets from the old transponder would be included
in the initial packets from the new transponder. This usually
transpired with userspace programs complaining about services
missing, because they are seeing a PAT that they would not be
expecting. Running in full TS mode does not exhibit this problem,
neither does using just the additional 32.

This patch adds in an option to not use the inital 6 and solely use
just the additional 32, and enables this option for the SkystarS2
card. Other cards can be added as required if they also have
this bug.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

d3525b63

[media] ddbridge: Do not free_irq() if request_irq() failed · 25e057fd

Takeshi Yoshimura authored May 27, 2015

My static checker detected that free_irq() is called even after
request_irq() failed in ddb_probe(). In this case, the kernel may try to
free dev->pdev->irq although the IRQ is not assigned. This event rarely
occurs, but always introduces a warning if it happens.

"goto fail1" always results in disabling enabled MSI and releasing a
requested IRQ. It seems like the former handling is necessary. So I added
a conditional branch before the free_irq() (stat == 0 means request_irq()
succeeds).
Signed-off-by: Takeshi Yoshimura <yos@sslab.ics.keio.ac.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

25e057fd

[media] staging: media: omap4iss: Reformat overly long lines · ee8defec

Piotr S. Staszewski authored May 26, 2015

This reformats lines that were previously above 80 characters long,
improving readability and making checkpatch.pl happier.
Signed-off-by: Piotr S. Staszewski <p.staszewski@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

ee8defec

[media] Staging: media: lirc: Replace timeval with ktime_t · 34668350

Ksenija Stanojevic authored May 22, 2015

'struct timeval last_tv' is used to get the time of last signal change
and 'struct timeval last_intr_tv' is used to get the time of last UART
interrupt.
32-bit systems using 'struct timeval' will break in the year 2038, so we
have to replace that code with more appropriate types.
Here struct timeval is replaced with ktime_t.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

34668350

[media] Documentation: update cardlists · bba795fc

Mauro Carvalho Chehab authored Jun 09, 2015

The card lists at Documentation/video4linux are missing some
boards. Add them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

bba795fc