Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

ttm_agp_tt_create is itself defined under CONFIG_AGP, so there's no
point calling it otherwise.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

nouveau_fb_destroy already calls nouveau_mm_fini on vram mm.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

With the introduction of fan management modes, fan may not be drivable.
We should allow reclocking nonetheless.

This return was stupid to begin with since it may have left the card
in an intermediate state (clocks corresponding to a perflvl and voltage
corresponding to another one). The reclocking code will need to be
rewritten in a near-future in order to provide a better error handling.
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Reported-by: Vekin on IRC
Reported-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This is needed for automatic fan management where some delays
can be over 0xffffffff ns.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Reported-by: Jukka Hopeavuori <jukka.hopea@gmail.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Fixes crash during reclocking.
Call Trace:
 pll_calc == NULL
 calc_pll
 calc_mclk
 nv50_pm_clocks_pre
 nouveau_pm_perflvl_set
 nouveau_pm_trigger
 nouveau_pm_profile_set
 nouveau_pm_set_perflvl
 dev_attr_store
 sysfs_write_file
 vfs_write
 sys_write
 system_call_fastpath
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Details of the problem, and solution, are in comments in the commit
proper.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Hopefully fixed the tlb flush timeout issue.  Was able to observe this
condition occur occasionally, and it appears the binary driver doesn't
wait on the old condition either..

Should give 39-bit DMA addressing on the relevant chipsets.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Something seems to be missing in regards to flushing specific ranges of
the TLB.  For the moment, flushing the entire thing seems to make it
work alright.

Should give 39-bit DMA addressing on the relevant chipsets.

v2: allocate contig 16KiB for dummy pages, reported by mwk on irc
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We don't need to pull the page address out of the page tables on nv4x
chips that have a real GART.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

For now, only 2 control modes are available:
- NONE: The fan is never touched (default)
- MANUAL: The fan is set to the user-defined fan speed (pwm1)

This patch introduces a distinction between ptherm internal fan management
and external fan management. The latter is bound to respect the fan mode
while the first can still select the speed it wants unless the NONE mode
is selected. This is important for automatic fan management.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This was reported by tizbac on IRC.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2: Martin Peres <martin.peres@labri.fr>
- fixed unintentional use of floating point
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The previous driver waited for 250ms to accumulate data. This version times a
complete fan rotation and extrapolates to RPM.

The fan rotational speed should now be read in less than 250ms (worst case)
and usually in less 50ms.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

It looks scary because of the size, but I tried to keep the differences minimal.
Further patches will fix the actual "driver" code and add new features.

v2: change filenames, split to submodules

v3: add a missing include

v4: Ben Skeggs <bskeggs@redhat.com>
- fixed set_defaults() to allow min_duty < 30 (thermal table will
  override this if it's actually necessary)
- fixed set_defaults() to not provide pwm_freq so nv4x (which only has
  pwm_div) can actually work.  the boards using pwm_freq will have a
  thermal table entry to provide us the value.
- removed unused files
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2: perf_table now is more in line with the other functions
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This commit also adds a static list of all known devices and their possible
i2c addresses.

v2: use the common table parsing technique as suggested by darktama
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

As an accident, it should also fix temperature reading on nv4x.

v2: introduce nvbios_therm_entry as advised by darktama
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Martin Peres <martin.peres@labri.fr>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

If nouveau_pm_perflvl_get() fails, pm->profiles list will be left
uninitialized, which causes oops during nouveau_pm_fini().

Move INIT_LIST_HEAD before call to nouveau_pm_perflvl_get().
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This will make it more obvious which application caused particular messages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

May kill the DRM version completely at some point, undecided..
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Can be somewhat more informative that way...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Seems to be required to "re-arm" the engines after a vm fault.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Not really sure how to confirm this 100%, but, the numbers match on all the
traces I have for NVCx (2 LTS), NVD9 (1LTS) and NVEx (4LTS).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Graphics acceleration is still disabled by default due to lingering issues
that need to be solved.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Triggers PIBUS interrupts due to register not existing anymore, and as
a result HUB_SET_CHAN times out.

After this commit, our fuc loads and can accelerate at least fbcon, X,
glxgears and OA on NVE4.  NVE7 not tested as of yet.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Currently identical except the available chipset register lists.  This will
*not* currently work and is disabled by default because of this.

May get merged again later, remains to be seen what further changes will be
required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>