MT8365 is similar to the other SoCs supported by the driver. It has only
one bank and 3 actual sensors that can be multiplexed. There is another
one sensor that does not have usable data.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-3-55a1ae14af74@baylibre.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Add logic in order to be able to turn on the control buffer on MT8365.
This change now allows to have control buffer support for MTK_THERMAL_V1,
and it allows to define the register offset, and mask used to enable it.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-2-55a1ae14af74@baylibre.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Add the binding documentation for the thermal support on MT8365 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-1-55a1ae14af74@baylibre.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Merge thermal control updates for 6.4-rc1:

 - Add a thermal zone 'devdata' accessor and modify several drivers to
   use it (Daniel Lezcano).

 - Prevent drivers from using the 'device' internal thermal zone
   structure field directly (Daniel Lezcano).

 - Clean up the hwmon thermal driver (Daniel Lezcano).

 - Add thermal zone id accessor and thermal zone type accessor
   and prevent drivers from using thermal zone fields directly (Daniel
   Lezcano).

 - Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano).

* thermal-core:
  thermal/drivers/acerhdf: Remove pointless governor test
  thermal/drivers/acerhdf: Make interval setting only at module load time
  thermal/drivers/tegra: Remove unneeded lock when setting a trip point
  thermal/hwmon: Use the thermal_core.h header
  thermal/drivers/da9062: Don't access the thermal zone device fields
  thermal: Use thermal_zone_device_type() accessor
  thermal: Add a thermal zone id accessor
  thermal/drivers/spear: Don't use tz->device but pdev->dev
  thermal/core: Add thermal_zone_device structure 'type' accessor
  thermal: Don't use 'device' internal thermal zone structure field
  thermal/hwmon: Use the right device for devm_thermal_add_hwmon_sysfs()
  thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
  thermal: Remove debug or error messages in get_temp() ops
  thermal/core: Show a debug message when get_temp() fails
  thermal/core: Use the thermal zone 'devdata' accessor in remaining drivers
  thermal/core: Use the thermal zone 'devdata' accessor in hwmon located drivers
  thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
  thermal/core: Add a thermal zone 'devdata' accessor

The thermal zone parameter specifies the bang-bang governor.

The Kconfig selects the bang-bang governor. So it is pointless to test
if the governor was set for the thermal zone assuming it may not have
been compiled-in.

Remove the test and prevent another access into the thermal internals.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter Kaestle <peter@piie.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal zone device structure is in the process of being private
to the thermal framework core code. This driver is directly accessing
and changing the monitoring polling rate.

After discussing with the maintainers of this driver, having the
polling interval at module loading time is enough for their purpose.

Change the code to take into account the interval when the module is
loaded but restrict the permissions so the value can not be changed
afterwards.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The function tegra_tsensor_enable_hw_channel() takes the thermal zone
lock to prevent "a potential" race with a call to set_trips()
callback.

The driver must not play with the thermal framework core code
internals.

The tegra_tsensor_enable_hw_channel() is called by:

 - the suspend / resume callbacks
 - the probe function after the thermal zones are registered

The thermal zone lock taken in this function is supposed to protect
from a call to the set_trips() callback which writes in the same
register.

The potential race is when suspend / resume are called at the same
time as set_trips. This one is called only in
thermal_zone_device_update().

 - At suspend time, the 'in_suspend' is set, thus the
   thermal_zone_device_update() bails out immediately and set_trips is
   not called during this moment.

 - At resume time, the thermal zone is updated at PM_POST_SUSPEND,
   thus the driver has already set the TH2 temperature.

 - At probe time, we register the thermal zone and then we set the
   TH2. The only scenario I can see so far is the interrupt fires, the
   thermal_zone_update() is called exactly at the moment
   tegra_tsensor_enable_hw_channel() a few lines after registering it.

Enable the channels before setting up the interrupt. We close the
potential race window without using the thermal zone's lock.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal_hwmon is playing with the thermal core code
internals. Changing the code would be too invasive for now.

We can consider the thermal_hwmon.c is part of the thermal core code
as it provides a glue to tie the hwmon and the thermal zones.

Let's include the thermal_core.h header.

No functional change intended.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The driver is reading the passive polling rate in the thermal zone
structure. We want to prevent the drivers to rummage around in the
thermal zone structure.

On the other side, the delay is what the driver passed to the
thermal_zone_device_register() function, so it has already the
information.

Reuse the information we have instead of reading the information we
set.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace the accesses to 'tz->type' by its accessor version in order to
self-encapsulate the thermal_zone_device structure.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In order to get the thermal zone id but without directly accessing the
thermal zone device structure, add an accessor.

Use the accessor in the hwmon_scmi and acpi_thermal.

No functional change intented.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Use the spear associated device instead of the thermal zone device
which belongs to the thermal framework internals.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal zone device structure is exposed via the exported
thermal.h header. This structure should stay private the thermal core
code. In order to encapsulate the structure, let's add an accessor to
get the 'type' of the thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Some drivers are directly using the thermal zone's 'device' structure
field.

Use the driver device pointer instead of the thermal zone device when
it is available.

Remove the traces when they are duplicate with the traces in the core
code.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek LVTS
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The devres variant of thermal_add_hwmon_sysfs() only takes the thermal
zone structure pointer as parameter.

Actually, it uses the tz->device to add it in the devres list.

It is preferable to use the device registering the thermal zone
instead of the thermal zone device itself. That prevents the driver
accessing the thermal zone structure internals and it is from my POV
more correct regarding how devm_ is used.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #amlogic_thermal
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal->tzp->no_hwmon parameter is only used when calling
thermal_zone_device_register().

Setting it to 'false' before calling thermal_add_hwmon_sysfs() has no
effect.

Remove the call and again prevent the drivers to access the thermal
internals.

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Some get_temp() ops implementation are showing an error or a debug
message if the reading of the sensor fails.

The debug message is already displayed from the call site of this
ops. So we can remove it.

On the other side, the error should not be displayed because in
production that can raise tons of messages.

Finally, some drivers are showing a debug message with the
temperature, this is also accessible through the trace from the core
code in the temperature_update() function.

Another benefit is the dev_* messages are accessing the thermal zone
device field from the structure, so we encapsulate even more the code
by preventing these accesses.

Remove those messages.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> #Armada
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #brcmstb_thermal.c
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The different thermal drivers are showing an error in case the
get_temp() fails. Actually no traces should be displayed in the
backend ops but in the call site of this ops.

Furthermore, the message is often a dev_dbg message where the
tz->device is used, thus using the internal of the structure from the
driver.

Show a debug message if the thermal_zone_get_temp() fails to read the
sensor temperature, so code showing the message is factored out and
the tz->device accesss is in the scope of the thermal core framework.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.

In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.

Use the devdata accessor introduced in the previous patch.

No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw
Acked-by: Gregory Greenman <gregory.greenman@intel.com> #iwlwifi
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> #power_supply
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> #ahci
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.

In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.

Use the devdata accessor introduced in the previous patch.

No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net> #hwmon
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.

In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.

Use the devdata accessor introduced in the previous patch.

No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts
Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>  #spread
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom
Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.

In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.

Provide an accessor to the 'devdata' structure and make use of it in
the different drivers.

No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When user space updates the trip point there is a deadlock, which results
in caller gets blocked forever.

Commit 05eeee2b ("thermal/core: Protect sysfs accesses to thermal
operations with thermal zone mutex"), added a mutex for tz->lock in the
function trip_point_temp_store(). Hence, trip set callback() can't
call any thermal zone API as they are protected with the same mutex lock.

The callback here calling thermal_zone_device_enable(), which will result
in deadlock.

Move the thermal_zone_device_enable() to proc_thermal_pci_probe() to
avoid this deadlock.

Fixes: 05eeee2b ("thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: 6.2+ <stable@vger.kernel.org> # 6.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull more thermal control updates from Rafael Wysocki:
 "These fix two issues in the Intel thermal control drivers.

  Specifics:

   - Fix an error pointer dereference in the quark_dts Intel thermal
     driver (Dan Carpenter)

   - Fix the intel_bxt_pmic_thermal driver Kconfig entry to select
     REGMAP which is not user-visible instead of depending on it (Randy
     Dunlap)"

* tag 'thermal-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: BXT_PMIC: select REGMAP instead of depending on it
  thermal: intel: quark_dts: fix error pointer dereference

Pull more ACPI updates from Rafael Wysocki:
 "These update ACPI quirks for some x86 platforms and add an IRQ
  override quirk for one more system.

  Specifics:

   - Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA
     (Vojtech Hejsek)

   - Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
     any more after a firmware update (Mario Limonciello)

   - Add all Cezanne systems to the list for forcing StorageD3Enable,
     because they all need the same quirk (Mario Limonciello)"

* tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
  ACPI: x86: Drop quirk for HP Elitebook
  ACPI: resource: Skip IRQ override on Asus Expertbook B2402FBA

Pull more power management updates from Rafael Wysocki:
 "These update power capping (new hardware support and cleanup) and
  cpufreq (bug fixes, cleanups and intel_pstate adjustment for a new
  platform).

  Specifics:

   - Fix error handling in the apple-soc cpufreq driver (Dan Carpenter)

   - Change the log level of a message in the amd-pstate cpufreq driver
     so it is more visible to users (Kai-Heng Feng)

   - Adjust the balance_performance EPP value for Sapphire Rapids in the
     intel_pstate cpufreq driver (Srinivas Pandruvada)

   - Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick
     Alcock)

   - Make a read-only kobj_type structure in the schedutil cpufreq
     governor constant (Thomas Weißschuh)

   - Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
     power capping driver (Sumeet Pawnikar)"

* tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: apple-soc: Fix an IS_ERR() vs NULL check
  powercap: remove MODULE_LICENSE in non-modules
  cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules
  powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC
  cpufreq: amd-pstate: remove MODULE_LICENSE in non-modules
  cpufreq: schedutil: make kobj_type structure constant
  cpufreq: amd-pstate: Let user know amd-pstate is disabled
  cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids

Pull more io_uring updates from Jens Axboe:
 "Here's a set of fixes/changes that didn't make the first cut, either
  because they got queued before I sent the early merge request, or
  fixes that came in afterwards. In detail:

   - Don't set MSG_NOSIGNAL on recv/recvmsg opcodes, as AF_PACKET will
     error out (David)

   - Fix for spurious poll wakeups (me)

   - Fix for a file leak for buffered reads in certain conditions
     (Joseph)

   - Don't allow registered buffers of mixed types (Pavel)

   - Improve handling of huge pages for registered buffers (Pavel)

   - Provided buffer ring size calculation fix (Wojciech)

   - Minor cleanups (me)"

* tag 'io_uring-6.3-2023-03-03' of git://git.kernel.dk/linux:
  io_uring/poll: don't pass in wake func to io_init_poll_iocb()
  io_uring: fix fget leak when fs don't support nowait buffered read
  io_uring/poll: allow some retries for poll triggering spuriously
  io_uring: remove MSG_NOSIGNAL from recvmsg
  io_uring/rsrc: always initialize 'folio' to NULL
  io_uring/rsrc: optimise registered huge pages
  io_uring/rsrc: optimise single entry advance
  io_uring/rsrc: disallow multi-source reg buffers
  io_uring: remove unused wq_list_merge
  io_uring: fix size calculation when registering buf ring
  io_uring/rsrc: fix a comment in io_import_fixed()
  io_uring: rename 'in_idle' to 'in_cancel'
  io_uring: consolidate the put_ref-and-return section of adding work

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - Don't access released socket during error recovery (Akinobu
        Mita)
      - Bring back auto-removal of deleted namespaces during sequential
        scan (Christoph Hellwig)
      - Fix an error code in nvme_auth_process_dhchap_challenge (Dan
        Carpenter)
      - Show well known discovery name (Daniel Wagner)
      - Add a missing endianess conversion in effects masking (Keith
        Busch)

 - Fix for a regression introduced in blk-rq-qos during init in this
   merge window (Breno)

 - Reorder a few fields in struct blk_mq_tag_set, eliminating a few
   holes and shrinking it (Christophe)

 - Remove redundant bdev_get_queue() NULL checks (Juhyung)

 - Add sed-opal single user mode support flag (Luca)

 - Remove SQE128 check in ublk as it isn't needed, saving some memory
   (Ming)

 - Op specific segment checking for cloned requests (Uday)

 - Exclusive open partition scan fixes (Yu)

 - Loop offset/size checking before assigning them in the device (Zhong)

 - Bio polling fixes (me)

* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
  blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
  nvme-fabrics: show well known discovery name
  nvme-tcp: don't access released socket during error recovery
  nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
  nvme: bring back auto-removal of deleted namespaces during sequential scan
  blk-iocost: Pass gendisk to ioc_refresh_params
  nvme: fix sparse warning on effects masking
  block: be a bit more careful in checking for NULL bdev while polling
  block: clear bio->bi_bdev when putting a bio back in the cache
  loop: loop_set_status_from_info() check before assignment
  ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
  block: remove more NULL checks after bdev_get_queue()
  blk-mq: Reorder fields in 'struct blk_mq_tag_set'
  block: fix scan partition for exclusively open device again
  block: Revert "block: Do not reread partition table on exclusively open device"
  sed-opal: add support flag for SUM in status ioctl

Pull ATA fix from Damien Le Moal:

 - Revert commit 104ff59a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
   controller") as it is causing serious regressions (failure to boot)
   on some laptops

* tag 'ata-6.3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"

Merge additional ACPI quirks for x86 systems:

 - Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
   any more after a firmware update (Mario Limonciello).

 - Add all Cezanne systems to the list for forcing StorageD3Enable,
   because they all need the same quirk (Mario Limonciello).

* acpi-pm:
  ACPI: x86: Drop quirk for HP Elitebook

* acpi-x86:
  ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable

Pull more s390 updates from Heiko Carstens:

 - Add empty command line parameter handling stubs to kernel for all
   command line parameters which are handled in the decompressor. This
   avoids invalid "Unknown kernel command line parameters" messages from
   the kernel, and also avoids that these will be incorrectly passed to
   user space. This caused already confusion, therefore add the empty
   stubs

 - Add missing phys_to_virt() handling to machine check handler

 - Introduce and use a union to be used for zcrypt inline assemblies.
   This makes sure that only a register wide member of the union is
   passed as input and output parameter to inline assemblies, while
   usual C code uses other members of the union to access bit fields of
   it

 - Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to
   atomically read a 128-bit value from memory. This replaces the
   (mis-)use of the 128-bit cmpxchg operation to do the same in cpum_sf
   code. Currently gcc does not generate the used lpq instruction if
   __READ_ONCE() is used for aligned 128-bit accesses, therefore use
   this s390 specific helper

 - Simplify machine check handler code if a task needs to be killed
   because of e.g. register corruption due to a machine malfunction

 - Perform CPU reset to clear pending interrupts and TLB entries on an
   already stopped target CPU before delegating work to it

 - Generate arch/s390/boot/vmlinux.map link map for the decompressor,
   when CONFIG_VMLINUX_MAP is enabled for debugging purposes

 - Fix segment type handling for dcssblk devices. It incorrectly always
   returned type "READ/WRITE" even for read-only segements, which can
   result in a kernel panic if somebody tries to write to a read-only
   device

 - Sort config S390 select list again

 - Fix two kprobe reenter bugs revealed by a recently added kprobe kunit
   test

* tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kprobes: fix current_kprobe never cleared after kprobes reenter
  s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
  s390/Kconfig: sort config S390 select list again
  s390/extmem: return correct segment type in __segment_load()
  s390/decompressor: add link map saving
  s390/smp: perform cpu reset before delegating work to target cpu
  s390/mcck: cleanup user process termination path
  s390/cpum_sf: use READ_ONCE_ALIGNED_128() instead of 128-bit cmpxchg
  s390/rwonce: add READ_ONCE_ALIGNED_128() macro
  s390/ap,zcrypt,vfio: introduce and use ap_queue_status_reg union
  s390/nmi: fix virtual-physical address confusion
  s390/setup: do not complain about parameters handled in decompressor

Pull more RISC-V updates from Palmer Dabbelt:

 - Some cleanups and fixes for the Zbb-optimized string routines

 - Support for custom (vendor or implementation defined) perf events

 - COMMAND_LINE_SIZE has been increased to 1024

* tag 'riscv-for-linus-6.3-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Bump COMMAND_LINE_SIZE value to 1024
  drivers/perf: RISC-V: Allow programming custom firmware events
  riscv, lib: Fix Zbb strncmp
  RISC-V: improve string-function assembly

Merge additional power capping changes for 6.3-rc1:

 - Remove MODULE_LICENSE from non-modular power capping code (Nick
   Alcock).

 - Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
   power capping driver (Sumeet Pawnikar).

* powercap:
  powercap: remove MODULE_LICENSE in non-modules
  powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC

Pull RTC updates from Alexandre Belloni:
 "A few drivers got some nice cleanups and a new driver are making the
  bulk of the changes.

  Subsystem:
   - allow rtc_read_alarm without read_alarm callback

  New driver:
   - NXP BBNSM module RTC

  Drivers:
   - use IRQ flags from fwnode when available
   - abx80x: nvmem support
   - brcmstb-waketimer: add non-wake alarm support
   - ingenic: provide CLK32K clock
   - isl12022: cleanups
   - moxart: switch to using gpiod API
   - pcf85363: allow setting quartz load
   - pm8xxx: cleanups and support for setting time
   - rv3028, rv3032: add ACPI support"

* tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (64 commits)
  rtc: pm8xxx: add support for nvmem offset
  dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset
  rtc: abx80x: Add nvmem support
  rtc: rx6110: Remove unused of_gpio,h
  rtc: efi: Avoid spamming the log on RTC read failure
  rtc: isl12022: sort header inclusion alphabetically
  rtc: isl12022: Join string literals back
  rtc: isl12022: Drop unneeded OF guards and of_match_ptr()
  rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L
  rtc: isl12022: Get rid of unneeded private struct isl12022
  rtc: pcf85363: add support for the quartz-load-femtofarads property
  dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding
  rtc: allow rtc_read_alarm without read_alarm callback
  rtc: rv3032: add ACPI support
  rtc: rv3028: add ACPI support
  rtc: bbnsm: Add the bbnsm rtc support
  rtc: jz4740: Register clock provider for the CLK32K pin
  rtc: jz4740: Use dev_err_probe()
  rtc: jz4740: Use readl_poll_timeout
  dt-bindings: rtc: Add #clock-cells property
  ...

Commit 104ff59a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
controller") enabled low power mode for the Tiger Lake AHIC adapter in
the author system but created regressions for others. Revert this patch
for now until a better solution is found to make this adapter
eco-friendly.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

The block layer might merge together discard requests up until the
max_discard_segments limit is hit, but blk_insert_cloned_request checks
the segment count against max_segments regardless of the req op. This
can result in errors like the following when discards are issued through
a DM device and max_discard_segments exceeds max_segments for the queue
of the chosen underlying device.

blk_insert_cloned_request: over max segments limit. (256 > 129)

Fix this by looking at the req_op and enforcing the appropriate segment
limit - max_discard_segments for REQ_OP_DISCARDs and max_segments for
everything else.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230301000655.48112-1-ushankar@purestorage.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull drm fixes from Dave Airlie:
 "fbdev:
   - fix uninit var in error path

  shmem:
   - revert unGPLing an export

  i915:
   - Don't use stolen memory or BAR mappings for ring buffers with LLC
   - Add inverted backlight quirk for HP 14-r206nv
   - Fix GSI offset for MCR lookups
   - GVT fixes (memleak, debugfs attributes, kconfig, typos)

  amdgpu:
   - SMU 13 fixes
   - Enable TMZ for GC 10.3.6
   - Misc display fixes
   - Buddy allocator fixes
   - GC 11 fixes
   - S0ix fix
   - INFO IOCTL queries for GC 11
   - VCN harvest fixes for SR-IOV
   - UMC 8.10 RAS fixes
   - Don't restrict bpc to 8
   - NBIO 7.5 fix
   - Allow freesync on PCon for more devices

  amdkfd:
   - SDMA fix
   - Illegal memory access fix"

* tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits)
  drm/amdgpu/vcn: fix compilation issue with legacy gcc
  drm/amd/display: Extend Freesync over PCon support for more devices
  Revert "drm/amd/display: Do not set DRR on pipe commit"
  drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
  drm/amd/display: Ext displays with dock can't recognized after resume
  drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
  drm/amdgpu: remove unused variable ring
  drm/amd/display: fix dm irq error message in gpu recover
  drm/amd: Fix initialization for nbio 7.5.1
  drm/amd/display: Don't restrict bpc to 8 bpc
  drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable
  drm/radeon: Fix eDP for single-display iMac11,2
  drm/shmem-helper: Revert accidental non-GPL export
  drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()
  drm/amd/pm: downgrade log level upon SMU IF version mismatch
  drm/amdgpu: Add ecc info query interface for umc v8_10
  drm/amdgpu: Add convert_error_address function for umc v8_10
  drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err
  drm/amdgpu: change default behavior of bad_page_threshold parameter
  drm/amdgpu: exclude duplicate pages from UMC RAS UE count
  ...

Pull arm64 fixes from Catalin Marinas:

 - In copy_highpage(), only reset the tag of the destination pointer if
   KASAN_HW_TAGS is enabled so that user-space MTE does not interfere
   with KASAN_SW_TAGS (which relies on top-byte-ignore).

 - Remove warning if SME is detected without SVE, the kernel can cope
   with such configuration (though none in the field currently).

 - In cfi_handler(), pass the ESR_EL1 value to die() for consistency
   with other die() callers.

 - Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte
   manipulation from the generic vmemmap_remap_pte() does not follow the
   required ARM break-before-make sequence (clear the pte, flush the
   TLBs, set the new pte). It may be re-enabled once this sequence is
   sorted.

 - Fix possible memory leak in the arm64 ACPI code if the SMCCC version
   and conduit checks fail.

 - Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores
  -falign-functions=N with -Os.

 - Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no
   randomisation would actually take place.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN
  arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE
  arm64: acpi: Fix possible memory leak of ffh_ctxt
  arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
  arm64: pass ESR_ELx to die() of cfi_handler
  arm64/fpsimd: Remove warning for SME without SVE
  arm64: Reset KASAN tag in copy_highpage with HW tags only

Merge tag 'amd-drm-fixes-6.3-2023-03-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.3-2023-03-02:

amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices

amdkfd:
- SDMA fix
- Illegal memory access fix

radeon:
- Display fix for iMac11,2

UAPI:
- Add some additional INFO IOCTL queries for GC 11 fixes
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302051843.7793-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-02-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 fixes for v6.3-rc1:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87cz5v2z0j.fsf@intel.com