- 28 Oct, 2010 40 commits
-
-
Lukasz Majewski authored
Signed-off-by:
Lukasz Majewski <l.majewski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Lukasz Majewski authored
BUCK1/2 internal voltages and indexes defined in the struct max8998_data max_get_voltage_register now uses index values to chose proper register More generic BUCK1/2 registers names provided Signed-off-by:
-
Lukasz Majewski authored
Signed-off-by:
-
Lukasz Majewski authored
Signed-off-by:
-
Grazvydas Ignotas authored
The chip TRM documentation contradicts itself about this bit, page 174 of swcu050e says bit should be 0 for clear-on-read behavior, while page 487 says it should be 1. Testing shows it should be 1, so set the .set_cor flag accordingly. This is needed for upcoming BCI charging driver to function. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Brian Harring authored
When the cell data_size is 0, the resulting platform_data pointer will be set to ZERO_SIZE_PTR. That could be misleading for device drivers running a NULL check on thei platform_data pointer before dereferencing it. Signed-off-by:
Brian Harring <ferringb@gmail.com> Signed-off-by:
-
Grazvydas Ignotas authored
Now that we have twl4030 charger driver, add back it's platform_data (which was removed by f7ea2dc5 as unused). Signed-off-by:
-
Uwe Kleine-König authored
The mfd driver for MC13783 recently got support for MC13892 and was renamed accordingly from mc13783-core to mc13xxx-core. Do the same for rtc-mc13783. The only relevant change is to use platform id's to tell the platform bus that this driver is responsible for mc13892-rtc devices, too. Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
kishore kadiyala authored
Adding card detect callback function and card detect configuration function for MMC1 Controller on OMAP4. Card detect configuration function does initial configuration of the MMC Control & PullUp-PullDown registers of Phoenix. For MMC1 Controller, card detect interrupt source is twl6030 which is non-gpio. The card detect call back function provides card present/absent status by reading MMC Control register present on twl6030. Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect, the suspend/resume initialization which was done in omap_hsmmc_gpio_init previously is moved to the probe thus making it generic for both OMAP3 & OMAP4. Cc: Tony Lindgren <tony@atomide.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by:
Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by:
-
Uwe Kleine-König authored
mc13892 is the companion PMIC for Freescale's i.MX51. It's similar enough to mc13782 to support it in a single driver. This patch introduces enough compatibility cruft to keep all users of the superseded mc13783 driver unchanged. Signed-off-by:
-
Uwe Kleine-König authored
The last user is gone since v2.6.34-rc1~40 Signed-off-by:
-
Uwe Kleine-König authored
The regulator driver was converted to get the needed data directly from platform_data by a10099bc (regulator/mc13783: various cleanups) so regulators and num_regulators can go away. Then apart from the flag indicating that the adc does a conversion, flags is only a copy of the flags member of platform_data. This flag isn't needed to be returned by mc13783_get_flags, so mc13783_get_flags now gets the flags from platform_data, too and the driver private member is renamed for clearity. Signed-off-by:
-
Daniel Drake authored
This is needed for supporting the upcoming VX855 camera and OLPC DCON drivers, as well as the advanced viafb features on non-OLPC hardware based on this chip. Based on earlier work by Harald Welte. Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Daniel Drake authored
This device has GPIO, SPI and I2C capabilities. The hardware can be found in the OLPC XO-1.5 laptop. Based on earlier work by Harald Welte. Signed-off-by:
-
Daniel Drake authored
The upcoming VIA VX855 MFD driver needs to communicate resources to subdevices where the resources may be claimed by ACPI. Add a flag to mfd_cell to request that resources are not policed. Signed-off-by:
-
Haojian Zhuang authored
Remove original 3-second ONKEY event. Detect ONKEY changing event directly. So both UP and DOWN event of ONKEY in max8925 are monitered. Signed-off-by:
Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Haojian Zhuang authored
88pm860x supports auto-blink LED in hardware. It messed with timer trigger. Now disable the auto-blink function. Signed-off-by:
-
Mark Brown authored
The WM8325 is a PMIC for low power, high performance applications. From a software point of view the device is identical to the WM8320, all the differences are at the hardware level. Signed-off-by:
-
Mark Brown authored
Otherwise sparse warns about a public symbol with no declaration and the compiler can't spot if the callers and users have different signatures for the function. Signed-off-by:
-
G, Manjunath Kondaiah authored
Fixes below sparse warning. drivers/mfd/twl-core.c:258:20: warning: symbol 'twl_map' was not declared. Should it be static? Signed-off-by:
G, Manjunath Kondaiah <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by:
-
Richard Röjfors authored
This patch defines platform data for the ks8842 int the timberdale MFD. The platform data contains DMA channels to be used by the driver. Signed-off-by:
Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by:
-
Sundar Iyer authored
Add PM helpers to STMPE and add support to enable wakeup from low power states Acked-by:
Rabin VINCENT <rabin.vincent@stericsson.com> Acked-by:
Linus WALLEIJ <linus.walleij@stericsson.com> Signed-off-by:
Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by:
-
Vasiliy Kulikov authored
Free allocated memory. Call stmpe_disable() if it was enabled. Signed-off-by:
Vasiliy Kulikov <segooon@gmail.com> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
-
Samuel Ortiz authored
msp430 being a bool, it will only work with I2C=y Signed-off-by: -
Arun Murthy authored
This patch add a dependancy for ab8500-core driver so as to depend on u8500 platform. This patch also fixes the build issues(powerpc_allyesconfig) for the patch 03f582a93ecca6e9584b622570022abf08ed03ec (misc: Add ab8500 pwm driver) Signed-off-by:
Arun Murthy <arun.murthy@stericsson.com> Acked-by:
-
Gary King authored
Add support for enabling and disabling tps6586x subdevice interrupts Signed-off-by:
Gary King <gking@nvidia.com> Acked-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
-
Mattias Wallin authored
This patch adds the choice of accessing the AB8500 registers via prcmu I2C. Access either via SPI or I2C is supported. Signed-off-by:
Mattias Wallin <mattias.wallin@stericsson.com> Acked-by:
-
Mattias Wallin authored
This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by:
-
Haojian Zhuang authored
Chipid of 88pm8607 is 0x40 or 0x50. Signed-off-by:
-
Arun Murthy authored
This patch adds a Pulse Width Modulation driver for Analog Baseband Chip AB8500. Signed-off-by:
-
Mattias Wallin authored
This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by:
-
Virupax Sadashivpetimath authored
This patch removes the requirement that gpio base be supplied in platform data. Signed-off-by:
Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Acked-by:
-
Yusuke Goda authored
Adjust the tmio_mmc block size check to accept 2-byte requests in 4-bit mode if the hardware supports it. Tested with the SDHI hardware block included in sh7724. Signed-off-by:
Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by:
Matt Fleming <matt@console-pimps.org> Acked-by:
Magnus Damm <damm@opensource.se> Tested-by:
Arnd Hannemann <arnd@arndnet.de> Signed-off-by:
-
Arnd Hannemann authored
On AP4EVB the card detect pin of the top SD/MMC slot is not directly connected to the tmio/mmcif controller but to a GPIO pin, so polling needs to be done for SDHI1 and MMCIF in order to support hotplug for that slot. SHDI1 and MMCIF share that slot, and the used controller is selected by a DIP switch. This patch adds a helper function to check if a card is present in that particular slot, registers this function with SDHI1 and MMCIF and enables polling for SDHI1. Signed-off-by:
-
Arnd Hannemann authored
In some platforms (e.g. AP4EVB) the card detect pin of a slot is not directly connected to the sh_mmcif controller, so that polling needs to be used. To overcome the overhead induced by querying the controller on each poll cycle, card detection can be handled in the platform code more efficiently. This patch exposes a get_cd hook for that purpose. Signed-off-by:
-
Arnd Hannemann authored
On some platforms (e.g. AP4EVB) the card detect pin of a slot is not directly connected to the sdhi hardware, so that polling needs to be used with tmio_mmc and card detection is handled in the platform code. This patch allows to set tmio_mmc capabilities (to pass the MMC_CAP_NEEDS_POLL flag) and exposes a get_cd hook for that purpose. Signed-off-by:
-
Arnd Hannemann authored
Some controllers, supported by the tmio_mmc driver do not have the card detect pin of a slot connected, so that polling needs to be used and card detection is handled by other means. This patch exposes a get_cd hook for that purpose. Signed-off-by:
-
Joonyoung Shim authored
This adds support for the RTC provided by the Maxim 8998 chip. This driver was tested on a GONI board by using the rtc-test application from the Documentation/rtc.txt. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Joonyoung Shim authored
Use genirq and provide seperated file for interrupts support. Signed-off-by:
-
Joonyoung Shim authored
The MAX8998 chip have regulator and rtc features. The i2c slave address of regulator and rtc is different, so needs each i2c client on i2c operation functions. Also, this patch exports i2c operation functions instead of callback to make easy to read. Signed-off-by:
-
