- 23 Jul, 2019 5 commits
-
-
Ding Xiang authored
put_device will call ac97_codec_release to free ac97_codec_device and other resources, so remove the kfree and other redundant code. Fixes: 74426fbf ("ALSA: ac97: add an ac97 bus") Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Charles Keepax authored
Draining makes little sense in the situation of hardware overrun, as the hardware will have consumed all its available samples. Additionally, draining whilst the stream is paused would presumably get stuck as no data is being consumed on the DSP side. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Charles Keepax authored
Partial drain and next track are intended for gapless playback and don't really have an obvious interpretation for a capture stream, so makes sense to not allow those operations on capture streams. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Charles Keepax authored
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which allow a transition to SNDRV_PCM_STATE_SETUP. The stream should only be able to move to the setup state once it has received a SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing those ioctls whilst in the open state. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Charles Keepax authored
A previous fix to the stop handling on compressed capture streams causes some knock on issues. The previous fix updated snd_compr_drain_notify to set the state back to PREPARED for capture streams. This causes some issues however as the handling for snd_compr_poll differs between the two states and some user-space applications were relying on the poll failing after the stream had been stopped. To correct this regression whilst still fixing the original problem the patch was addressing, update the capture handling to skip the PREPARED state rather than skipping the SETUP state as it has done until now. Fixes: 4f2ab5e1 ("ALSA: compress: Fix stop handling on compressed capture streams") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 Jul, 2019 1 commit
-
-
Christophe JAILLET authored
s/Vairax/Variax/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 Jul, 2019 1 commit
-
-
Takashi Iwai authored
The recent rewrite of PCM link lock management introduced the refcount in snd_pcm_group object, managed by the kernel refcount_t API. This caused unexpected kernel warnings when the kernel is built with CONFIG_REFCOUNT_FULL=y. As the warning line indicates, the problem is obviously that we start with refcount=0 and do refcount_inc() for adding each PCM link, while refcount_t API doesn't like refcount_inc() performed on zero. For adapting the proper refcount_t usage, this patch changes the logic slightly: - The initial refcount is 1, assuming the single list entry - The refcount is incremented / decremented at each PCM link addition and deletion - ... which allows us concentrating only on the refcount as a release condition Fixes: f57f3df0 ("ALSA: pcm: More fine-grained PCM link locking") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204221Reported-and-tested-by: Duncan Overbruck <kernel@duncano.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 18 Jul, 2019 2 commits
-
-
Kai-Heng Feng authored
Commit 7b9584fa ("staging: line6: Move altsetting to properties") set a wrong altsetting for LINE6_PODHD500_1 during refactoring. Set the correct altsetting number to fix the issue. BugLink: https://bugs.launchpad.net/bugs/1790595 Fixes: 7b9584fa ("staging: line6: Move altsetting to properties") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The codecs without jack detection also don't have to be resumed forcibly because, obviously, they have no jack. Skip the forced resume in such a case as optimization as well. Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 16 Jul, 2019 5 commits
-
-
Takashi Iwai authored
We apply the codec resume forcibly at system resume callback for updating and syncing the jack detection state that may have changed during sleeping. This is, however, superfluous for the codec like Intel HDMI/DP, where the jack detection is managed via the audio component notification; i.e. the jack state change shall be reported sooner or later from the graphics side at mode change. This patch changes the codec resume callback to avoid the forcible resume conditionally with a new flag, codec->relaxed_resume, for reducing the resume time. The flag is set in the codec probe. Although this doesn't fix the entire bug mentioned in the bugzilla entry below, it's still a good optimization and some improvements are seen. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The recent fix for Icelake HDMI codec introduced the mapping from pin NID to the i915 gfx port number. However, it forgot the reverse mapping from the port number to the pin NID that is used in the ELD notifier callback. As a result, it's processed to a wrong widget and gives a warning like snd_hda_codec_hdmi hdaudioC0D2: HDMI: pin nid 5 not registered This patch corrects it with a proper reverse mapping function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204133 Fixes: b0d8bc50 ("ALSA: hda: hdmi - add Icelake support") Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
INTEL_GET_VENDOR_VERB is defined twice identically. Let's remove a superfluous line. Fixes: b0d8bc50 ("ALSA: hda: hdmi - add Icelake support") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The fix for the racy writes and ioctls to sequencer widened the application of client->ioctl_mutex to the whole write loop. Although it does unlock/relock for the lengthy operation like the event dup, the loop keeps the ioctl_mutex for the whole time in other situations. This may take quite long time if the user-space would give a huge buffer, and this is a likely cause of some weird behavior spotted by syzcaller fuzzer. This patch puts a simple workaround, just adding a mutex break in the loop when a large number of events have been processed. This shouldn't hit any performance drop because the threshold is set high enough for usual operations. Fixes: 7bd80091 ("ALSA: seq: More protection for concurrent write and ioctl races") Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Hui Wang authored
Without this patch, the headset-mic and headphone-mic don't work. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 Jul, 2019 4 commits
-
-
Hariprasad Kelam authored
This patch fixes below issue reported by coccicheck sound/pci/rme9652/rme9652.c:2161:5-11: Unneeded variable: "result". Return "0" on line 2167 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Hariprasad Kelam authored
fix below issue reported by coccicheck sound/pci/emu10k1/emu10k1x.c:1077:5-11: Unneeded variable: "change". Return "0" on line 1092 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Hariprasad Kelam authored
Fix below issues reported by coccicheck sound/pci/au88x0/au88x0_a3d.c:821:8-15: Unneeded variable: "changed". Return "1" on line 834 sound/pci/au88x0/au88x0_a3d.c:768:5-12: Unneeded variable: "changed". Return "1" on line 777 sound/pci/au88x0/au88x0_a3d.c:804:5-12: Unneeded variable: "changed". Return "1" on line 813 sound/pci/au88x0/au88x0_a3d.c:786:8-15: Unneeded variable: "changed". Return "1" on line 796 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
It assigned to wrong model. So, The headphone Mic can't work. Fixes: 3f640970 ("ALSA: hda - Fix headset mic detection problem for several Dell laptops") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 Jul, 2019 2 commits
-
-
Hariprasad Kelam authored
This patch fixes below issue reported by coccicheck sound/ppc/snd_ps3.c:631:5-8: Unneeded variable: "ret". Return "0" on line 668 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Hariprasad Kelam authored
This patch fixes below issue reported by coccicheck sound/pci/lx6464es/lx6464es.c:256:5-8: Unneeded variable: "err". Return "0" on line 258 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 08 Jul, 2019 8 commits
-
-
Takashi Sakamoto authored
It's better to use int type for loop index. For consistency, the name of local variable for the number of data block should be plural. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
As a result of former commits, post operation to data block count for cases without CIP_DBC_IS_END_EVENT can be done just with data_block_counter member of amdtp_stream structure. This commit adds code refactoring to obsolete local variable for data block counter. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
When a parser for CIP header returns -EAGAIN, no extra care is needed to probe tracepoints event. This commit adds code refactoring for the error path. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
ALSA: firewire-lib: fix different data block counter between probed event and transferred isochronous packet For IT context, tracepoints event is probed after calculating next data block counter. This brings difference of data block counter between the probed event and actual isochronous packet. This commit fixes it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
ALSA: firewire-lib: fix initial value of data block count for IR context without CIP_DBC_IS_END_EVENT For IR context, ALSA IEC 61883-1/6 engine uses initial value of data block counter as UINT_MAX, to detect first isochronous packet in the middle of packet streaming. At present, when CIP_DBC_IS_END_EVENT is not used (i.e. for drivers except for ALSA fireworks driver), the initial value is used as is for tracepoints event. However, the engine can detect the value of dbc field in the payload of first isochronous packet and the value should be assigned to the event. This commit fixes the bug. Fixes: 76864868 ("ALSA: firewire-lib: cache next data_block_counter after probing tracepoints event for IR context") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
ALSA: firewire-lib/fireface: fix initial value of data block counter for IR context with CIP_NO_HEADER For IR context, ALSA IEC 61883-1/6 engine uses initial value of data block counter as UINT_MAX, to detect first isochronous packet in the middle of packet streaming. At present, when CIP_NO_HEADER is used (i.e. for ALSA fireface driver), the initial value is used for tracepoints event. 0x00 should be for the event when the initial value is UINT_MAX because isochronous packets with CIP_NO_HEADER option has no field for data block count. This commit fixes the bug. Fixes: 76864868 ("ALSA: firewire-lib: cache next data_block_counter after probing tracepoints event for IR context") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
Although CIP header is handled as context header, the length of isochronous packet includes two quadlets for its payload. In tracepoints event the value of payload_quadlets should includes the two quadlets. But at present it doesn't. This commit fixes the bug. Fixes: b18f0cfa ("ALSA: firewire-lib: use 8 byte packet header for IT context to separate CIP header from CIP payload") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.3 This is a very big update, mainly thanks to Morimoto-san's refactoring work and some fairly large new drivers. - Lots more work on moving towards a component based framework from Morimoto-san. - Support for force disconnecting muxes from Jerome Brunet. - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 07 Jul, 2019 8 commits
-
-
Takashi Iwai authored
Merge a cleanup for HD-audio widget refresh code Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Nicola Lunghi authored
Line6 Helix and HX stomp devices don't support retrieving the number of clock sample rate. Add a quirk to set it to 48Khz by default. [ fixed wrong variable initialization changes by tiwai ] Signed-off-by: Nicola Lunghi <nick83ola@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
firewire-motu: fix wrong reference count for stream functionality at error path of rawmidi interface In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA firewire-motu driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: 8edc56ec ("ALSA: firewire-motu: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
ALSA: firewire-digi00x: fix wrong reference count for stream functionality at error path of rawmidi interface In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA firewire-digi00x driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: ae8ffbb2 ("ALSA: firewire-digi00x: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA dice driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: 3cd2c2d7 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA oxfw driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: 4f380d00 ("ALSA: oxfw: configure packet format in pcm.hw_params callback") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
ALSA: fireworks: fix wrong reference count for stream functionality at error path of rawmidi interface In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA fireworks driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: 3d725066 ("ALSA: fireworks: configure sampling transfer frequency in pcm.hw_params callback") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA bebob driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: ac2888b9 ("ALSA: bebob: configure sampling transfer frequency in pcm.hw_params callback") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 06 Jul, 2019 4 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Kai Vehmanen authored
Implement runtime idle for CNL/APL devices using similar runtime PM idle logic as the Intel AZX HDA driver. If any HDA codecs are powered when runtime suspend request comes, return -EBUSY. By doing this, strict ordering is enforced between HDA codec and the HDA controller. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190702132428.13129-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-