- 02 Aug, 2010 40 commits
-
-
Jing Zhang authored
commit e39e07fd upstream (as of v2.6.34-git13) This function cleans up after ext4_mb_load_buddy(), so the renaming makes the code clearer. Signed-off-by:
Jing Zhang <zj.barak@gmail.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Jing Zhang authored
commit 62e823a2 upstream (as of v2.6.34-git13) Signed-off-by:
-
Jing Zhang authored
commit b720303d upstream (as of v2.6.34-git13) When EIO occurs after bio is submitted, there is no memory free operation for bio, which results in memory leakage. And there is also no check against bio_alloc() for bio. Acked-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by:
-
Dmitry Monakhov authored
commit 0671e704 upstream (as of v2.6.34-git13) Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Theodore Ts'o authored
commit b90f6870 upstream (as of v2.6.34-rc6) Otherwise, we can end up having data corruption because the blocks could get reused and then discarded! https://bugzilla.kernel.org/show_bug.cgi?id=15579Signed-off-by:
-
Curt Wohlgemuth authored
commit fd2dd9fb upstream (as of v2.6.34-rc6) Calls to ext4_get_inode_loc() returns with a reference to a buffer head in iloc->bh. The callers of this function in ext4_write_inode() when in no journal mode and in ext4_xattr_fiemap() don't release the buffer head after using it. Addresses-Google-Bug: #2548165 Signed-off-by:
Curt Wohlgemuth <curtw@google.com> Signed-off-by:
-
Curt Wohlgemuth authored
commit 8b472d73 upstream (as of v2.6.34-rc6) In the no-journal case, ext4_write_inode() will fetch the bh and call sync_dirty_buffer() on it. However, if the bh has already been written and the bh reclaimed for some other purpose, AND if the inode is the only one in the inode table block in use, then ext4_get_inode_loc() will not read the inode table block from disk, but as an optimization, fill the block with zero's assuming that its caller will copy in the on-disk version of the inode. This is not done by ext4_write_inode(), so the contents of the inode can simply get lost. The fix is to use __ext4_get_inode_loc() with in_mem set to 0, instead of ext4_get_inode_loc(). Long term the API needs to be fixed so it's obvious why latter is not safe. Addresses-Google-Bug: #2526446 Signed-off-by:
-
Eric Sandeen authored
commit c4caae25 upstream (as of v2.6.34-rc3) When used_dirs was introduced for the flex_groups struct, it looks like the accounting was not put into place properly, in some places manipulating free_inodes rather than used_dirs. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Jan Kara authored
commit d330a5be upstream (as of v2.6.34-rc3) http://bugzilla.kernel.org/show_bug.cgi?id=15420Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Akira Fujita authored
commit c437b273 upstream (as of v2.6.33-git11) a) Fix sparse warning in ext4_ioctl() b) Remove unneeded variable in mext_leaf_block() c) Fix spelling typo in mext_check_arguments() Signed-off-by:
Akira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by:
-
Akira Fujita authored
commit 7247c0ca upstream (as of v2.6.33-git11) If EXT4_IOC_MOVE_EXT ioctl is called with NULL donor_fd, fget() in ext4_ioctl() gets inappropriate file structure for donor; so we need to do this check earlier, before calling double_down_write_data_sem(). Signed-off-by:
-
Akira Fujita authored
commit 5fd5249a upstream (as of v2.6.33-git11) If the leaf node has 2 extent space or fewer and EXT4_IOC_MOVE_EXT ioctl is called with the file offset where after the 2nd extent covers, mext_insert_across_blocks() always tries to insert extent into the first extent. As a result, the file gets corrupted because of wrong extent order. The patch fixes this problem. Signed-off-by:
-
Toshiyuki Okajima authored
commit b8b8afe2 upstream (as of v2.6.33-git11) The callers of ext4_check_dir_entry() usually pass in the "file offset" (ext4_readdir, htree_dirblock_to_tree, search_dirblock, ext4_dx_find_entry, empty_dir), but a few callers (add_dirent_to_buf, ext4_delete_entry) only pass in the buffer offset. To accomodate those last two (which would be hard to fix otherwise), this patch changes ext4_check_dir_entry() to print the physical block number and the relative offset as well as the passed-in offset. Signed-off-by:
Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by:
-
Dmitry Monakhov authored
commit 6e3617e5 upstream (as of v2.6.33-git11) In case of truncate errors we explicitly remove inode from in-core orphan list via orphan_del(NULL, inode) without modifying the on-disk list. But later on, the same inode may be inserted in the orphan list again which will result the on-disk linked list getting corrupted. If inode i_dtime contains valid value, then skip on-disk list modification. Signed-off-by:
-
Dmitry Monakhov authored
commit da1dafca upstream (as of v2.6.33-git11) Otherwise non-empty orphan list will be triggered on umount. Signed-off-by:
-
Dmitry Monakhov authored
commit f39490bc upstream (as of v2.6.33-git11) Set i_nlink to zero for temporary inode from very beginning. otherwise we may fail to start new journal handle and this inode will be unreferenced but with i_nlink == 1 Since we hold inode reference it can not be pruned. Also add missed journal_start retval check. Signed-off-by:
-
Tao Ma authored
commit cc483f10 upstream (as of v2.6.33-git11) The ext4 multiblock allocator decides whether to use group or file preallocation based on the file size. When the file size reaches s_mb_stream_request (default is 16 blocks), it changes to use a file-specific preallocation. This is cool, but it has a tiny problem. See a simple script: mkfs.ext4 -b 1024 /dev/sda8 1000000 mount -t ext4 -o nodelalloc /dev/sda8 /mnt/ext4 for((i=0;i<5;i++)) do cat /mnt/4096>>/mnt/ext4/a #4096 is a file with 4096 characters. cat /mnt/4096>>/mnt/ext4/b done debuge4fs -R 'stat a' /dev/sda8|grep BLOCKS -A 1 And you get BLOCKS: (0-14):8705-8719, (15):2356, (16-19):8465-8468 So there are 3 extents, a bit strange for the lonely 15th logical block. As we write to the 16 blocks, we choose file preallocation in ext4_mb_group_or_file, but in ext4_mb_normalize_request, we meet with the 16*1024 range, so no preallocation will be carried. file b then reserves the space after '2356', so when when write 16, we start from another part. This patch just change the check in ext4_mb_group_or_file, so that for the lonely 15 we will still use group preallocation. After the patch, we will get: debuge4fs -R 'stat a' /dev/sda8|grep BLOCKS -A 1 BLOCKS: (0-15):8705-8720, (16-19):8465-8468 Looks more sane. Thanks. Signed-off-by:
Tao Ma <tao.ma@oracle.com> Signed-off-by:
-
Jiaying Zhang authored
commit c8d46e41 upstream (as of v2.6.33-git11) fallocate() may potentially instantiate blocks past EOF, depending on the flags used when it is called. e2fsck currently has a test for blocks past i_size, and it sometimes trips up - noticeably on xfstests 013 which runs fsstress. This patch from Jiayang does fix it up - it (along with e2fsprogs updates and other patches recently from Aneesh) has survived many fsstress runs in a row. Signed-off-by:
Jiaying Zhang <jiayingz@google.com> Signed-off-by:
-
Curt Wohlgemuth authored
commit 73b50c1c upstream (as of v2.6.33-git11) Calls to ext4_handle_dirty_metadata should only pass in an inode pointer for inode-specific metadata, and not for shared metadata blocks such as inode table blocks, block group descriptors, the superblock, etc. The BUG_ON can get tripped when updating a special device (such as a block device) that is opened (so that i_mapping is set in fs/block_dev.c) and the file system is mounted in no journal mode. Addresses-Google-Bug: #2404870 Signed-off-by:
-
Theodore Ts'o authored
commit 19f5fb7a upstream (as of v2.6.33-git11) At several places we modify EXT4_I(inode)->i_state without holding i_mutex (ext4_release_file, ext4_bmap, ext4_journalled_writepage, ext4_do_update_inode, ...). These modifications are racy and we can lose updates to i_state. So convert handling of i_state to use bitops which are atomic. Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 1296cc85 upstream (as of v2.6.33-rc6) We should update reserve space if it is delalloc buffer and that is indicated by EXT4_GET_BLOCKS_DELALLOC_RESERVE flag. So use EXT4_GET_BLOCKS_DELALLOC_RESERVE in place of EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE [ Stable note: This fixes a corruption cuased by the following reproduction case: rm -f $TEST_FN touch $TEST_FN fallocate -n -o 656712 -l 858907 $TEST_FN dd if=/dev/zero of=$TEST_FN conv=notrunc bs=1 seek=1011020 count=36983 sync dd if=/dev/zero of=$TEST_FN conv=notrunc bs=1 seek=332121 count=24005 dd if=/dev/zero of=$TEST_FN conv=notrunc bs=1 seek=1040179 count=93319 If the filesystem is then unmounted and e2fsck run forced, the i_blocks field for the file $TEST_FN will be found to be incorrect. ] Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 5f634d06 upstream (as of v2.6.33-rc6) When we fallocate a region of the file which we had recently written, and which is still in the page cache marked as delayed allocated blocks we need to make sure we don't do the quota update on writepage path. This is because the needed quota updated would have already be done by fallocate. Signed-off-by:
-
Aneesh Kumar K.V authored
commit 1db91382 upstream (as of v2.6.33-rc6) We need to release the journal before we do a write_inode. Otherwise we could deadlock. Signed-off-by:
-
Theodore Ts'o authored
commit 9d0be502 upstream (as of v2.6.33-rc3) In the past, ext4_calc_metadata_amount(), and its sub-functions ext4_ext_calc_metadata_amount() and ext4_indirect_calc_metadata_amount() badly over-estimated the number of metadata blocks that might be required for delayed allocation blocks. This didn't matter as much when functions which managed the reserved metadata blocks were more aggressive about dropping reserved metadata blocks as delayed allocation blocks were written, but unfortunately they were too aggressive. This was fixed in commit 0637c6f4, but as a result the over-estimation by ext4_calc_metadata_amount() would lead to reserving 2-3 times the number of pending delayed allocation blocks as potentially required metadata blocks. So if there are 1 megabytes of blocks which have been not yet been allocation, up to 3 megabytes of space would get reserved out of the user's quota and from the file system free space pool until all of the inode's data blocks have been allocated. This commit addresses this problem by much more accurately estimating the number of metadata blocks that will be required. It will still somewhat over-estimate the number of blocks needed, since it must make a worst case estimate not knowing which physical blocks will be needed, but it is much more accurate than before. Signed-off-by:
-
Theodore Ts'o authored
commit ee5f4d9c upstream (as of v2.6.33-rc3) Commit 0637c6f4 had a typo which caused the reserved metadata blocks to not be released correctly. Fix this. Signed-off-by:
-
Theodore Ts'o authored
commit 0637c6f4 upstream (as of v2.6.33-rc3) As reported in Kernel Bugzilla #14936, commit d21cd8f1 triggered a BUG in the function ext4_da_update_reserve_space() found in fs/ext4/inode.c. The root cause of this BUG() was caused by the fact that ext4_calc_metadata_amount() can severely over-estimate how many metadata blocks will be needed, especially when using direct block-mapped files. In addition, it can also badly *under* estimate how much space is needed, since ext4_calc_metadata_amount() assumes that the blocks are contiguous, and this is not always true. If the application is writing blocks to a sparse file, the number of metadata blocks necessary can be severly underestimated by the functions ext4_da_reserve_space(), ext4_da_update_reserve_space() and ext4_da_release_space(). This was the cause of the dq_claim_space reports found on kerneloops.org. Unfortunately, doing this right means that we need to massively over-estimate the amount of free space needed. So in some cases we may need to force the inode to be written to disk asynchronously in to avoid spurious quota failures. http://bugzilla.kernel.org/show_bug.cgi?id=14936Signed-off-by:
-
Aneesh Kumar K.V authored
commit 515f41c3 upstream (as of v2.6.33-rc3) This fixes a bug (found by Curt Wohlgemuth) in which new blocks returned from an extent created with ext4_ext_zeroout() can have dirty metadata still associated with them. Signed-off-by:
-
Richard Kennedy authored
commit 2faf2e19 upstream (as of v2.6.33-rc3) When ext4_da_writepages increases the nr_to_write in writeback_control then it must always re-base the return value. Originally there was a (misguided) attempt prevent wbc.nr_to_write from going negative. In fact, it's necessary to allow nr_to_write to be negative so that wb_writeback() can correctly calculate how many pages were actually written. Signed-off-by:
Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by:
-
Julia Lawall authored
commit d3533d72 upstream (as of v2.6.33-rc3) b_entry_name and buffer are initially NULL, are initialized within a loop to the result of calling kmalloc, and are freed at the bottom of this loop. The loop contains gotos to cleanup, which also frees b_entry_name and buffer. Some of these gotos are before the reinitializations of b_entry_name and buffer. To maintain the invariant that b_entry_name and buffer are NULL at the top of the loop, and thus acceptable arguments to kfree, these variables are now set to NULL after the kfrees. This seems to be the simplest solution. A more complicated solution would be to introduce more labels in the error handling code at the end of the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier E; expression E1; iterator I; statement S; @@ *kfree(E); ... when != E = E1 when != I(E,...) S when != &E *kfree(E); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Theodore Ts'o authored
commit cc3e1bea upstream (as of v2.6.33-rc3) This is a bit complicated because we are trying to optimize when we send barriers to the fs data disk. We could just throw in an extra barrier to the data disk whenever we send a barrier to the journal disk, but that's not always strictly necessary. We only need to send a barrier during a commit when there are data blocks which are must be written out due to an inode written in ordered mode, or if fsync() depends on the commit to force data blocks to disk. Finally, before we drop transactions from the beginning of the journal during a checkpoint operation, we need to guarantee that any blocks that were flushed out to the data disk are firmly on the rust platter before we drop the transaction from the journal. Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4. Signed-off-by:
-
Surbhi Palande authored
commit 034fb4c9 upstream (as of v2.6.33-rc3) This patch fixes the Kernel BZ #14286. When the address of an extent corresponding to a valid block is corrupted, a -EIO should be reported instead of a BUG(). This situation should not normally not occur except in the case of a corrupted filesystem. If however it does, then the system should not panic directly but depending on the mount time options appropriate action should be taken. If the mount options so permit, the I/O should be gracefully aborted by returning a -EIO. http://bugzilla.kernel.org/show_bug.cgi?id=14286Signed-off-by:
Surbhi Palande <surbhi.palande@canonical.com> Signed-off-by:
-
Dmitry Monakhov authored
commit d21cd8f1 upstream (as of v2.6.33-rc2) We have to delay vfs_dq_claim_space() until allocation context destruction. Currently we have following call-trace: ext4_mb_new_blocks() /* task is already holding ac->alloc_semp */ ->ext4_mb_mark_diskspace_used ->vfs_dq_claim_space() /* acquire dqptr_sem here. Possible deadlock */ ->ext4_mb_release_context() /* drop ac->alloc_semp here */ Let's move quota claiming to ext4_da_update_reserve_space() ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc7 #18 ------------------------------------------------------- write-truncate-/3465 is trying to acquire lock: (&s->s_dquot.dqptr_sem){++++..}, at: [<c025e73b>] dquot_claim_space+0x3b/0x1b0 but task is already holding lock: (&meta_group_info[i]->alloc_sem){++++..}, at: [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&meta_group_info[i]->alloc_sem){++++..}: [<c017d04b>] __lock_acquire+0xd7b/0x1260 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c0527191>] down_read+0x51/0x90 [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370 [<c02d0c1c>] ext4_mb_free_blocks+0x46c/0x870 [<c029c9d3>] ext4_free_blocks+0x73/0x130 [<c02c8cfc>] ext4_ext_truncate+0x76c/0x8d0 [<c02a8087>] ext4_truncate+0x187/0x5e0 [<c01e0f7b>] vmtruncate+0x6b/0x70 [<c022ec02>] inode_setattr+0x62/0x190 [<c02a2d7a>] ext4_setattr+0x25a/0x370 [<c022ee81>] notify_change+0x151/0x340 [<c021349d>] do_truncate+0x6d/0xa0 [<c0221034>] may_open+0x1d4/0x200 [<c022412b>] do_filp_open+0x1eb/0x910 [<c021244d>] do_sys_open+0x6d/0x140 [<c021258e>] sys_open+0x2e/0x40 [<c0103100>] sysenter_do_call+0x12/0x32 -> #2 (&ei->i_data_sem){++++..}: [<c017d04b>] __lock_acquire+0xd7b/0x1260 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c0527191>] down_read+0x51/0x90 [<c02a5787>] ext4_get_blocks+0x47/0x450 [<c02a74c1>] ext4_getblk+0x61/0x1d0 [<c02a7a7f>] ext4_bread+0x1f/0xa0 [<c02bcddc>] ext4_quota_write+0x12c/0x310 [<c0262d23>] qtree_write_dquot+0x93/0x120 [<c0261708>] v2_write_dquot+0x28/0x30 [<c025d3fb>] dquot_commit+0xab/0xf0 [<c02be977>] ext4_write_dquot+0x77/0x90 [<c02be9bf>] ext4_mark_dquot_dirty+0x2f/0x50 [<c025e321>] dquot_alloc_inode+0x101/0x180 [<c029fec2>] ext4_new_inode+0x602/0xf00 [<c02ad789>] ext4_create+0x89/0x150 [<c0221ff2>] vfs_create+0xa2/0xc0 [<c02246e7>] do_filp_open+0x7a7/0x910 [<c021244d>] do_sys_open+0x6d/0x140 [<c021258e>] sys_open+0x2e/0x40 [<c0103100>] sysenter_do_call+0x12/0x32 -> #1 (&sb->s_type->i_mutex_key#7/4){+.+...}: [<c017d04b>] __lock_acquire+0xd7b/0x1260 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c0526505>] mutex_lock_nested+0x65/0x2d0 [<c0260c9d>] vfs_load_quota_inode+0x4bd/0x5a0 [<c02610af>] vfs_quota_on_path+0x5f/0x70 [<c02bc812>] ext4_quota_on+0x112/0x190 [<c026345a>] sys_quotactl+0x44a/0x8a0 [<c0103100>] sysenter_do_call+0x12/0x32 -> #0 (&s->s_dquot.dqptr_sem){++++..}: [<c017d361>] __lock_acquire+0x1091/0x1260 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c0527191>] down_read+0x51/0x90 [<c025e73b>] dquot_claim_space+0x3b/0x1b0 [<c02cb95f>] ext4_mb_mark_diskspace_used+0x36f/0x380 [<c02d210a>] ext4_mb_new_blocks+0x34a/0x530 [<c02c83fb>] ext4_ext_get_blocks+0x122b/0x13c0 [<c02a5966>] ext4_get_blocks+0x226/0x450 [<c02a5ff3>] mpage_da_map_blocks+0xc3/0xaa0 [<c02a6ed6>] ext4_da_writepages+0x506/0x790 [<c01de272>] do_writepages+0x22/0x50 [<c01d766d>] __filemap_fdatawrite_range+0x6d/0x80 [<c01d7b9b>] filemap_flush+0x2b/0x30 [<c02a40ac>] ext4_alloc_da_blocks+0x5c/0x60 [<c029e595>] ext4_release_file+0x75/0xb0 [<c0216b59>] __fput+0xf9/0x210 [<c0216c97>] fput+0x27/0x30 [<c02122dc>] filp_close+0x4c/0x80 [<c014510e>] put_files_struct+0x6e/0xd0 [<c01451b7>] exit_files+0x47/0x60 [<c0146a24>] do_exit+0x144/0x710 [<c0147028>] do_group_exit+0x38/0xa0 [<c0159abc>] get_signal_to_deliver+0x2ac/0x410 [<c0102849>] do_notify_resume+0xb9/0x890 [<c01032d2>] work_notifysig+0x13/0x21 other info that might help us debug this: 3 locks held by write-truncate-/3465: #0: (jbd2_handle){+.+...}, at: [<c02e1f8f>] start_this_handle+0x38f/0x5c0 #1: (&ei->i_data_sem){++++..}, at: [<c02a57f6>] ext4_get_blocks+0xb6/0x450 #2: (&meta_group_info[i]->alloc_sem){++++..}, at: [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370 stack backtrace: Pid: 3465, comm: write-truncate- Not tainted 2.6.32-rc7 #18 Call Trace: [<c0524cb3>] ? printk+0x1d/0x22 [<c017ac9a>] print_circular_bug+0xca/0xd0 [<c017d361>] __lock_acquire+0x1091/0x1260 [<c016bca2>] ? sched_clock_local+0xd2/0x170 [<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0 [<c017d5ea>] lock_acquire+0xba/0xd0 [<c025e73b>] ? dquot_claim_space+0x3b/0x1b0 [<c0527191>] down_read+0x51/0x90 [<c025e73b>] ? dquot_claim_space+0x3b/0x1b0 [<c025e73b>] dquot_claim_space+0x3b/0x1b0 [<c02cb95f>] ext4_mb_mark_diskspace_used+0x36f/0x380 [<c02d210a>] ext4_mb_new_blocks+0x34a/0x530 [<c02c601d>] ? ext4_ext_find_extent+0x25d/0x280 [<c02c83fb>] ext4_ext_get_blocks+0x122b/0x13c0 [<c016bca2>] ? sched_clock_local+0xd2/0x170 [<c016be60>] ? sched_clock_cpu+0x120/0x160 [<c016beef>] ? cpu_clock+0x4f/0x60 [<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0 [<c052712c>] ? down_write+0x8c/0xa0 [<c02a5966>] ext4_get_blocks+0x226/0x450 [<c016be60>] ? sched_clock_cpu+0x120/0x160 [<c016beef>] ? cpu_clock+0x4f/0x60 [<c017908b>] ? trace_hardirqs_off+0xb/0x10 [<c02a5ff3>] mpage_da_map_blocks+0xc3/0xaa0 [<c01d69cc>] ? find_get_pages_tag+0x16c/0x180 [<c01d6860>] ? find_get_pages_tag+0x0/0x180 [<c02a73bd>] ? __mpage_da_writepage+0x16d/0x1a0 [<c01dfc4e>] ? pagevec_lookup_tag+0x2e/0x40 [<c01ddf1b>] ? write_cache_pages+0xdb/0x3d0 [<c02a7250>] ? __mpage_da_writepage+0x0/0x1a0 [<c02a6ed6>] ext4_da_writepages+0x506/0x790 [<c016beef>] ? cpu_clock+0x4f/0x60 [<c016bca2>] ? sched_clock_local+0xd2/0x170 [<c016be60>] ? sched_clock_cpu+0x120/0x160 [<c016be60>] ? sched_clock_cpu+0x120/0x160 [<c02a69d0>] ? ext4_da_writepages+0x0/0x790 [<c01de272>] do_writepages+0x22/0x50 [<c01d766d>] __filemap_fdatawrite_range+0x6d/0x80 [<c01d7b9b>] filemap_flush+0x2b/0x30 [<c02a40ac>] ext4_alloc_da_blocks+0x5c/0x60 [<c029e595>] ext4_release_file+0x75/0xb0 [<c0216b59>] __fput+0xf9/0x210 [<c0216c97>] fput+0x27/0x30 [<c02122dc>] filp_close+0x4c/0x80 [<c014510e>] put_files_struct+0x6e/0xd0 [<c01451b7>] exit_files+0x47/0x60 [<c0146a24>] do_exit+0x144/0x710 [<c017b163>] ? lock_release_holdtime+0x33/0x210 [<c0528137>] ? _spin_unlock_irq+0x27/0x30 [<c0147028>] do_group_exit+0x38/0xa0 [<c017babb>] ? trace_hardirqs_on+0xb/0x10 [<c0159abc>] get_signal_to_deliver+0x2ac/0x410 [<c0102849>] do_notify_resume+0xb9/0x890 [<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0 [<c017b163>] ? lock_release_holdtime+0x33/0x210 [<c0165b50>] ? autoremove_wake_function+0x0/0x50 [<c017ba54>] ? trace_hardirqs_on_caller+0x134/0x190 [<c017babb>] ? trace_hardirqs_on+0xb/0x10 [<c0300ba4>] ? security_file_permission+0x14/0x20 [<c0215761>] ? vfs_write+0x131/0x190 [<c0214f50>] ? do_sync_write+0x0/0x120 [<c0103115>] ? sysenter_do_call+0x27/0x32 [<c01032d2>] work_notifysig+0x13/0x21 CC: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Ben Hutchings authored
commit bf988435 upstream. struct ethtool_rxnfc was originally defined in 2.6.27 for the ETHTOOL_{G,S}RXFH command with only the cmd, flow_type and data fields. It was then extended in 2.6.30 to support various additional commands. These commands should have been defined to use a new structure, but it is too late to change that now. Since user-space may still be using the old structure definition for the ETHTOOL_{G,S}RXFH commands, and since they do not need the additional fields, only copy the originally defined fields to and from user-space. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Corey Minyard authored
commit fcc6cb78 upstream. RT Systems has put out bunch of ham radio cables based on the FT232RL chip. Each cable type has a unique PID, this adds one for the Yaesu VX-7 radios. Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Oliver Neukum authored
commit 63ab71de upstream. This device needs to be reset when resuming Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
commit 20a12f00 upstream. Super speed is also fast enough to let sisusbvga operate. Therefor expand the checks. Signed-off-by:
-
Paul Mortier authored
commit 47f19c0e upstream. When an attempt is made to read the interface strings of the Artisman Watchdog USB dongle (idVendor:idProduct 04b4:0526) an error is written to the dmesg log (uhci_result_common: failed with status 440000) and the dongle resets itself, resulting in a disconnect/reconnect loop. Adding the dongle to the list of devices in quirks.c, with the same quirk Alan Stern's previous patch for the Saitek Cyborg Gold 3D joystick, stops the device from resetting and allows it to be used with no problems. Signed-off-by:
Paul Mortier <mortier@btinternet.com> Signed-off-by:
-
Dennis Jansen authored
commit 7595931c upstream. usbserial: Add AMOI Skypephone S2 support. This patch adds support for the AMOI Skypephone S2 to the usbserial module. Tested-by:
Dennis Jansen <Dennis.Jansen@web.de> Signed-off-by:
-
Colin Leitner authored
commit 77dbd74e upstream. ftdi_sio: support for Signalyzer tools based on FTDI chips This patch adds support for the Xverve Signalyzers. Signed-off-by:
Colin Leitner <colin.leitner@googlemail.com> Signed-off-by:
-
august huber authored
commit 9d72c81d upstream. Add VID/PID for Sierra Wireless 250U USB dongle to sierra.c Allows use of 3G radio only Signed-off-by:
August Huber <gus@pbx.org> Cc: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by:
-
