Although 4 unique register values exist for gamma modes, two are
actually the same (the two RAMs) It’s not possible for caller to
understand this HW specific behavior, so some parsing is necessary
in driver
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]Update Code to get DTN golden log check to pass for tests run after
DAL217 tests.
[How]Change how dcn10_log_hw_state function prints HW state info
(CM_GAMUT_REMAP_Cx_Cx registers) when GAMUT REMAP is in bypass mode.
Signed-off-by: Gary Kattan <gary.kattan@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
For supporting DP YCbCr 4:2:0 output.

[How]
Update mod_build_vsc_infopacket to support Pixel
Encoding/Colorimetry Format indication for VSC SDP rev5.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We currently lock modeset by setting a boolean in dm. We want to lock
Based on what DC tells us.

[How]
Build stream_updates and plane_update based on what changed. Then we
call check_update_surfaces_for_stream() to get the update type
We lock only if update_type is not fast
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise we won't be able to use the AGP aperture.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Start to use the old AGP aperture for system memory access.

v2: Move that to amdgpu_ttm_alloc_gart
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Helper to figure out the location of the AGP BAR.

v2: fix a couple of bugs
v3: correctly add one to vram_end
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Correct sign extend the GMC addresses to 48bit.

v2: sign extending turned out easier than thought.
v3: clean up the defines and move them into amdgpu_gmc.h as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since we have a lot of FAQ on the VM state machine try to improve the
documentation by adding functions for each state move.

v2: fix typo in amdgpu_vm_bo_invalidated, use amdgpu_vm_bo_relocated in
    one more place as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Avoid unlocking a lock we never locked.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allows us to avoid taking the spinlock in more places.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_vm_bo_* functions should come much later.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For under voltage, negative value will be applied to voltage
offset. Update the data type to cover this case.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Added vega20 overdrive support based on existing OD sysfs
APIs. However, the OD logics are simplified on vega20. So,
the behavior will be a little different and works only on
some limited levels.

V2: fix typo
    fix commit description
    revise error logs
    add support for clock OD

V3: separate clock from voltage OD settings
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Vega20 does not appear to be affected by the same issue
as vega10.  Enable the full stolen memory handling on
vega20.  Reserve the appropriate size at init time to avoid
display artifacts and then free it at the end of init once
the new FB is up and running.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

vega12 does not appear to be affected by the same issue
as vega10.  Enable the full stolen memory handling on
vega12.  Reserve the appropriate size at init time to avoid
display artifacts and then free it at the end of init once
the new FB is up and running.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Raven does not appear to be affected by the same issue
as vega10.  Enable the full stolen memory handling on
Raven.  Reserve the appropriate size at init time to avoid
display artifacts and then free it at the end of init once
the new FB is up and running.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=106639Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No functional change, just rework it in order to adjust the
behavior on a per asic level.  The problem is that on vega10,
something corrupts the lower 8 MB of vram on the second
resume from S3.  This does not seem to affect Raven, other
gmc9 based asics need testing.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add BOs to the idle state again and correctly clear the flag when
new BOs are added.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

First step to fix the LRU corruption, we accidentially tried to move things
on the LRU after dropping the lock.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Staring at the function for six hours, just to essentially move one line
of code. The problem was that the first list_cut_position call could result
in list2 pointing to la-la-land.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This at least allows to fail any subsequent IOCTLs with -ENODEV
after the device is gone.
Still this operation is not supported yet in graphic mode
and will lead at least to page faults and other issues.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit a7f91061.

Felix pointed out that we need to have the BOs mapped even before
amdgpu_vm_update_directories is called.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Always try to put the GART away from where VRAM is.

v2: correctly handle the 4GB limitation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This caused a confusing error message, but there is functionally
no problem since the default method is DIRECT.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Move some KFD-related (but used in amdgpu_drv.c) definitions from
kfd_priv.h to kgd_kfd_interface.h so we don't need to include kfd_priv.h
in amdgpu_drv.c. This fixes a build failure when AMDGPU is enabled but
MMU_NOTIFIER is not.
This patch also disables KFD-related module options when HSA_AMD is not
enabled.

v2: rebase (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

kvmalloc_array uses __GFP_ZERO flag ensures that the returned address
is zeroed already, memset it to zero again afterwards is unnecessary,
and in this case buggy because we only clear the first entry.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The first parameter of list_cut_position() must point to an initialized
list.

Noticed thanks to KASAN pointing out something's fishy here.

Fixes: "drm/ttm: add bulk move function on LRU"
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Instead of the larger one use the smaller hole in the MC address
space for the GART mappings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 31625ccae4464b61ec8cdb9740df848bbc857a5b.

It triggered various badness on my development machine when running the
piglit gpu profile with radeonsi on Bonaire, looks like memory
corruption due to insufficiently protected list manipulations.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Most of the time we only need to know if the BO has a valid GMC addr.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Further separate GART and GTT domain.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Improve the VCE limitation handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Move that into amdgpu_gmc.c since we are really deadling with GMC
address space here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For compute vm acquired from amdgpu, vm.pasid is managed
by kfd. Decouple pasid from such vm on process destroy
to avoid duplicate pasid release.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To make a amdgpu vm to a compute vm, the old pasid will be freed and
replaced with a pasid managed by kfd. Kfd can't reuse original pasid
allocated by amdgpu because kfd uses different pasid policy with amdgpu.
For example, all graphic devices share one same pasid in a process.

v2: rebase (Alex)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Doing it earlier hits a WARN_ON_ONCE in amdgpu_bo_gpu_offset.

Fixes: "drm/amdgpu: remove gart.table_addr"
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the VMC page fault when the running sequence is as below:
1.amdgpu_gem_create_ioctl
2.ttm_bo_swapout->amdgpu_vm_bo_invalidate, as not called
amdgpu_vm_bo_base_init, so won't called
list_add_tail(&base->bo_list, &bo->va). Even the bo was evicted,
it won't set the bo_base->moved.
3.drm_gem_open_ioctl->amdgpu_vm_bo_base_init, here only called
list_move_tail(&base->vm_status, &vm->evicted), but not set the
bo_base->moved.
4.amdgpu_vm_bo_map->amdgpu_vm_bo_insert_map, as the bo_base->moved is
not set true, the function amdgpu_vm_bo_insert_map will call
list_move(&bo_va->base.vm_status, &vm->moved)
5.amdgpu_cs_ioctl won't validate the swapout bo, as it is only in the
moved list, not in the evict list. So VMC page fault occurs.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>