The previous patch used bulk interconnect operations to initialize
IPA interconnects one at a time.  This rearranges things to use the
bulk interfaces as intended--on all interconnects together.  As a
result ipa_interconnect_init_one() and ipa_interconnect_exit_one()
are no longer needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use of_icc_bulk_get() and icc_bulk_put(), icc_bulk_set_bw(), and
icc_bulk_enable() and icc_bulk_disable() to initialize individual
IPA interconnects.  Those functions already log messages in the
event of error so we don't need to.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The power interconnect array is now an array of icc_bulk_data
structures, which is what the interconnect bulk enable and disable
functions require.

Get rid of ipa_interconnect_enable() and ipa_interconnect_disable(),
and just call icc_bulk_enable() and icc_bulk_disable() instead.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The interconnect framework now provides the ability to enable and
disable interconnects without having to change their recorded
"enabled" bandwidth value.  Use this mechanism, rather than setting
the bandwidth values to zero and non-zero respectively to disable
and enable the IPA interconnects.

Disable each interconnect before setting its "enabled" average and
peak bandwidth values.  Thereafter, enable and disable interconnects
when required rather than setting their bandwidths.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The ipa_interconnect structure contains an icc_path pointer, plus an
average and peak bandwidth value.  Other than the interconnect name,
this matches the icc_bulk_data structure exactly.

Use the icc_bulk_data structure in place of the ipa_interconnect
structure, and add an initialization of its name field.  Then get
rid of the now unnecessary ipa_interconnect structure definition.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The serial port driver attempts to test for correct THRE behavior
on startup.  However, it does this by disabling interrupts, and
then intentionally trying to trigger an interrupt in order to see
if the IIR bit is set in the UART.

However, in this FPGA design, the UART interrupt is generated
through the MSI vector, so when interrupts are re-enabled after
the test, the DMAR-IR reports an unhandled IRTE entry, since
no irq handler is installed at this point - it is installed
after the test.

This only happens on the /second/ open of the UART, since on the
first open, the x86_vector has installed and activated by the
driver probe, and is correctly handled.  When the serial port is
closed for the first time, this vector is deactivated and removed,
leading to this error.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220309223427.34745-1-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Previous commits introduced AF_XDP zero-copy support, in which
we need register different mem model for xdp_rxq when AF_XDP
zero-copy is enabled or not. And this should be done after xdp_rxq
info is registered, which is not needed for ctrl port, otherwise
there complaints warnings: "Missing register, driver bug".

Fix this by not registering mem model for ctrl port, just like we
don't register xdp_rxq info for ctrl port.

Fixes: 6402528b ("nfp: xsk: add AF_XDP zero-copy Rx and Tx support")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220309135533.10162-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-03-09

This series contains updates to ice driver only.

Martyna implements switchdev filtering on inner EtherType field for
tunnels.

Marcin adds reporting of slowpath statistics for port representors.

Jonathan Toppins changes a non-fatal link error message from warning to
debug.

Maciej removes unnecessary checks in ice_clean_tx_irq().

Amritha adds support for ADQ to match outer destination MAC for tunnels.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: Add support for outer dest MAC for ADQ tunnels
  ice: avoid XDP checks in ice_clean_tx_irq()
  ice: change "can't set link" message to dbg level
  ice: Add slow path offload stats on port representor in switchdev
  ice: Add support for inner etype in switchdev
====================

Link: https://lore.kernel.org/r/20220309190315.1380414-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
net: control the length of the altname list

Count the memory used for altnames and don't let user
overflow the property nlattr. This was reported by George:
https://lore.kernel.org/all/3e564baf-a1dd-122e-2882-ff143f7eb578@gmail.com/
====================

Link: https://lore.kernel.org/r/20220309182914.423834-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Property list (altname is a link "property") is wrapped
in a nlattr. nlattrs length is 16bit so practically
speaking the list of properties can't be longer than
that, otherwise user space would have to interpret
broken netlink messages.

Prevent the problem from occurring by checking the length
of the property list before adding new entries.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

George reports that altnames can eat up kernel memory.
We should charge that memory appropriately.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Few years ago OVS user space made a strange choice in the commit [1]
to define types only valid for the user space inside the copy of a
kernel uAPI header.  '#ifndef __KERNEL__' and another attribute was
added later.

This leads to the inevitable clash between user space and kernel types
when the kernel uAPI is extended.  The issue was unveiled with the
addition of a new type for IPv6 extension header in kernel uAPI.

When kernel provides the OVS_KEY_ATTR_IPV6_EXTHDRS attribute to the
older user space application, application tries to parse it as
OVS_KEY_ATTR_PACKET_TYPE and discards the whole netlink message as
malformed.  Since OVS_KEY_ATTR_IPV6_EXTHDRS is supplied along with
every IPv6 packet that goes to the user space, IPv6 support is fully
broken.

Fixing that by bringing these user space attributes to the kernel
uAPI to avoid the clash.  Strictly speaking this is not the problem
of the kernel uAPI, but changing it is the only way to avoid breakage
of the older user space applications at this point.

These 2 types are explicitly rejected now since they should not be
passed to the kernel.  Additionally, OVS_KEY_ATTR_TUNNEL_INFO moved
out from the '#ifdef __KERNEL__' as there is no good reason to hide
it from the userspace.  And it's also explicitly rejected now, because
it's for in-kernel use only.

Comments with warnings were added to avoid the problem coming back.

(1 << type) converted to (1ULL << type) to avoid integer overflow on
OVS_KEY_ATTR_IPV6_EXTHDRS, since it equals 32 now.

 [1] beb75a40fdc2 ("userspace: Switching of L3 packets in L2 pipeline")

Fixes: 28a3f060 ("net: openvswitch: IPv6: Add IPv6 extension header support")
Link: https://lore.kernel.org/netdev/3adf00c7-fe65-3ef4-b6d7-6d8a0cad8a5f@nvidia.com
Link: https://github.com/openvswitch/ovs/commit/beb75a40fdc295bfd6521b0068b4cd12f6de507cReported-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20220309222033.3018976-1-i.maximets@ovn.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This enables non-standard MTUs on a per-port basis, with the overall
frame size set based on the CPU port.

When the MTU is not changed, this should have no effect.

Long packets crash the switch with MTUs of greater than 2526, so the
maximum is limited for now. Medium packets are sometimes dropped (e.g.
TCP over 2477, UDP over 2516-2519, ICMP over 2526), Hence an MTU value
of 2400 seems safe.
Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://lore.kernel.org/r/20220308230457.1599237-1-olek2@wp.plSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-next-for-5.18-20220310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-03-10

The first 3 patches are by Oliver Hartkopp, target the CAN ISOTP
protocol and update the CAN frame sending behavior, and increases the
max PDU size to 64 kByte.

The next 2 patches are also by Oliver Hartkopp and update the virtual
VXCAN driver so that CAN frames send into the peer name space show up
as RX'ed CAN frames.

Vincent Mailhol contributes a patch for the etas_es58x driver to fix a
false positive dereference uninitialized variable warning.

2 patches by Ulrich Hecht add r8a779a0 SoC support to the rcar_canfd
driver.

The remaining 21 patches target the gs_usb driver and are by Peter
Fink, Ben Evans, Eric Evenchick and me. This series cleans up the
gs-usb driver, documents some bits of the USB ABI used by the widely
used open source firmware candleLight, adds support for up to 3 CAN
interfaces per USB device, adds CAN-FD support, adds quirks for some
hardware and software workarounds and finally adds support for 2 new
devices.

* tag 'linux-can-next-for-5.18-20220310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (29 commits)
  can: gs_usb: add VID/PID for ABE CAN Debugger devices
  can: gs_usb: add VID/PID for CES CANext FD devices
  can: gs_usb: add extended bt_const feature
  can: gs_usb: activate quirks for CANtact Pro unconditionally
  can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ value
  can: gs_usb: add usb quirk for NXP LPC546xx controllers
  can: gs_usb: add CAN-FD support
  can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_frame
  can: gs_usb: support up to 3 channels per device
  can: gs_usb: gs_usb_probe(): introduce udev and make use of it
  can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE feature
  can: gs_usb: document the USER_ID feature
  can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentation
  can: gs_usb: add HW timestamp mode bit
  can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all bt_const->feature
  can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb()
  can: gs_usb: rewrap error messages
  can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT()
  can: gs_usb: sort include files alphabetically
  can: gs_usb: fix checkpatch warning
  ...
====================

Link: https://lore.kernel.org/r/20220310142903.341658-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

net/dsa/dsa2.c
  commit afb3cc1a ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails")
  commit e83d5653 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master")
https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/

drivers/net/ethernet/intel/ice/ice.h
  commit 97b01291 ("ice: Fix error with handling of bonding MTU")
  commit 43113ff7 ("ice: add TTY for GNSS module for E810T device")
https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/

drivers/staging/gdm724x/gdm_lte.c
  commit fc7f750d ("staging: gdm724x: fix use after free in gdm_lte_rx()")
  commit 4bcc4249 ("staging: Use netif_rx().")
https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, and ipsec.

  Current release - regressions:

   - Bluetooth: fix unbalanced unlock in set_device_flags()

   - Bluetooth: fix not processing all entries on cmd_sync_work, make
     connect with qualcomm and intel adapters reliable

   - Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"

   - xdp: xdp_mem_allocator can be NULL in trace_mem_connect()

   - eth: ice: fix race condition and deadlock during interface enslave

  Current release - new code bugs:

   - tipc: fix incorrect order of state message data sanity check

  Previous releases - regressions:

   - esp: fix possible buffer overflow in ESP transformation

   - dsa: unlock the rtnl_mutex when dsa_master_setup() fails

   - phy: meson-gxl: fix interrupt handling in forced mode

   - smsc95xx: ignore -ENODEV errors when device is unplugged

  Previous releases - always broken:

   - xfrm: fix tunnel mode fragmentation behavior

   - esp: fix inter address family tunneling on GSO

   - tipc: fix null-deref due to race when enabling bearer

   - sctp: fix kernel-infoleak for SCTP sockets

   - eth: macb: fix lost RX packet wakeup race in NAPI receive

   - eth: intel stop disabling VFs due to PF error responses

   - eth: bcmgenet: don't claim WOL when its not available"

* tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
  ice: Fix race condition during interface enslave
  net: phy: meson-gxl: improve link-up behavior
  net: bcmgenet: Don't claim WOL when its not available
  net: arc_emac: Fix use after free in arc_mdio_probe()
  sctp: fix kernel-infoleak for SCTP sockets
  net: phy: correct spelling error of media in documentation
  net: phy: DP83822: clear MISR2 register to disable interrupts
  gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
  selftests: pmtu.sh: Kill nettest processes launched in subshell.
  selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
  NFC: port100: fix use-after-free in port100_send_complete
  net/mlx5e: SHAMPO, reduce TIR indication
  net/mlx5e: Lag, Only handle events from highest priority multipath entry
  net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
  net/mlx5: Fix a race on command flush flow
  net/mlx5: Fix size field in bufferx_reg struct
  ax25: Fix NULL pointer dereference in ax25_kill_by_device
  net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
  net: ethernet: lpc_eth: Handle error for clk_enable
  ...

Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.

The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.

Skip that connect trace point if xdp_alloc is NULL.

[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
  point ]

Fixes: 4a48ef70 ("xdp: Allow registering memory model without rxq reference")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 5dbbbd01 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.

Reproducer:
```
#!/bin/sh

ip link add lag0 type bond mode 1 miimon 100
ip link set lag0

for n in {1..10}; do
        echo Cycle: $n
        ip link set ens7f0 master lag0
        sleep 1
        ip link set ens7f0 nomaster
done
```

This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871]  __schedule+0x2d1/0x830
[20976.219364]  schedule+0x35/0xa0
[20976.222510]  schedule_preempt_disabled+0xa/0x10
[20976.227043]  __mutex_lock.isra.7+0x310/0x420
[20976.235071]  enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215]  ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192]  ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079]  ib_register_device+0x40d/0x580 [ib_core]
[20976.266139]  irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409]  irdma_probe+0x2c1/0x360 [irdma]
[20976.285691]  auxiliary_bus_probe+0x45/0x70
[20976.289790]  really_probe+0x1f2/0x480
[20976.298509]  driver_probe_device+0x49/0xc0
[20976.302609]  bus_for_each_drv+0x79/0xc0
[20976.306448]  __device_attach+0xdc/0x160
[20976.310286]  bus_probe_device+0x9d/0xb0
[20976.314128]  device_add+0x43c/0x890
[20976.321287]  __auxiliary_device_add+0x43/0x60
[20976.325644]  ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109]  ice_service_task+0xd0c/0xed0 [ice]
[20976.342591]  process_one_work+0x1a7/0x360
[20976.350536]  worker_thread+0x30/0x390
[20976.358128]  kthread+0x10a/0x120
[20976.365547]  ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip              state:D stack:    0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921]  __schedule+0x2d1/0x830
[20976.452414]  schedule+0x35/0xa0
[20976.455559]  schedule_preempt_disabled+0xa/0x10
[20976.460090]  __mutex_lock.isra.7+0x310/0x420
[20976.464364]  device_del+0x36/0x3c0
[20976.467772]  ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313]  ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288]  notifier_call_chain+0x47/0x70
[20976.481386]  __netdev_upper_dev_link+0x18b/0x280
[20976.489845]  bond_enslave+0xe05/0x1790 [bonding]
[20976.494475]  do_setlink+0x336/0xf50
[20976.502517]  __rtnl_newlink+0x529/0x8b0
[20976.543441]  rtnl_newlink+0x43/0x60
[20976.546934]  rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238]  netlink_rcv_skb+0x4c/0x120
[20976.563079]  netlink_unicast+0x196/0x230
[20976.567005]  netlink_sendmsg+0x204/0x3d0
[20976.570930]  sock_sendmsg+0x4c/0x50
[20976.574423]  ____sys_sendmsg+0x1eb/0x250
[20976.586807]  ___sys_sendmsg+0x7c/0xc0
[20976.606353]  __sys_sendmsg+0x57/0xa0
[20976.609930]  do_syscall_64+0x5b/0x1a0
[20976.613598]  entry_SYSCALL_64_after_hwframe+0x65/0xca

1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
   is called from ice_service_task() context, aux device is created
   and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
   RTNL lock and that notifier calls ice_unplug_aux_dev(). That
   function tries to take aux device->lock but this is already taken
   by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
   taken in step 2
4. Dead-lock

The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
  call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
  then ice_unplug_aux_dev() is called. If it is set (in other words
  plugging of aux device was requested and ice_plug_aux_dev() is
  potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
  the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
  whether it was already cleared by ice_clear_rdma_cap(). If so then
  aux device is unplugged.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sometimes the link comes up but no data flows. This patch fixes
this behavior. It's not clear what's the root cause of the issue.

According to the tests one other link-up issue remains.
In very rare cases the link isn't even reported as up.

Fixes: 84c8f773 ("net: phy: meson-gxl: remove the use of .ack_callback()")
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:

"Supports Wake-on: gsf"

which is false.

Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:

"Supports Wake-on: d"

This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.

Fixes: c51de7f3 ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free
the "bus". But bus->name is still used in the next line, which will lead
to a use after free.

We can fix it by putting the name in a local variable and make the
bus->name point to the rodata section "name",then use the name in the
error message without referring to bus to avoid the uaf.

Fixes: 95b5fc03 ("net: arc_emac: Make use of the helper function dev_err_probe()")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported a kernel infoleak [1] of 4 bytes.

After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()

Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.

[1]

BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 copyout lib/iov_iter.c:154 [inline]
 _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 copy_to_iter include/linux/uio.h:162 [inline]
 simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
 netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 __sys_recvfrom+0x795/0xa10 net/socket.c:2097
 __do_sys_recvfrom net/socket.c:2115 [inline]
 __se_sys_recvfrom net/socket.c:2111 [inline]
 __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3247 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1158 [inline]
 netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
 netlink_dump_start include/linux/netlink.h:254 [inline]
 inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
 sock_diag_rcv_msg+0x24a/0x620
 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 sock_write_iter+0x594/0x690 net/socket.c:1061
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_write+0x52c/0x1500 fs/read_write.c:851
 vfs_writev fs/read_write.c:924 [inline]
 do_writev+0x645/0xe00 fs/read_write.c:967
 __do_sys_writev fs/read_write.c:1040 [inline]
 __se_sys_writev fs/read_write.c:1037 [inline]
 __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at ffff888114f9b000
Data copied to user address 00007f7fe09ff2e0

CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 8f840e47 ("sctp: add the sctp_diag.c file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The header file incorrectly referenced "median-independant interface"
instead of media. Correct this typo.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Fixes: 4069a572 ("net: phy: Document core PHY structures")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220309062544.3073-1-colin.foster@in-advantage.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5-updates-2022-03-09

1) Remove kernel log prints on FW events regarding FW pages management
   and replace that with debugfs entries to track FW pages management commands
   failures and general stats, we do that for all FW commands in general since
   it's the same effort to do so under the already existing debugfs entry for
   FW commands.

2) Add support for ConnectX-7 Software managed steering, in other words STEv2
   which shares a lot in common with STE V1, the difference is in specific
   offsets in the devices, the logic is almost the same, thus we implement
   STEv1 and STEv2 in the same file.

* tag 'mlx5-updates-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: DR, Add support for ConnectX-7 steering
  net/mlx5: DR, Refactor ste_ctx handling for STE v0/1
  net/mlx5: DR, Rename action modify fields to reflect naming in HW spec
  net/mlx5: DR, Fix handling of different actions on the same STE in STEv1
  net/mlx5: DR, Remove unneeded comments
  net/mlx5: DR, Add support for matching on Internet Header Length (IHL)
  net/mlx5: DR, Align mlx5dv_dr API vport action with FW behavior
  net/mlx5: Add debugfs counters for page commands failures
  net/mlx5: Add pages debugfs
  net/mlx5: Move debugfs entries to separate struct
  net/mlx5: Change release_all_pages cap bit location
  net/mlx5: Remove redundant error on reclaim pages
  net/mlx5: Remove redundant error on give pages
  net/mlx5: Remove redundant notify fail on give pages
  net/mlx5: Add command failures data to debugfs
  net/mlx5e: TC, Fix use after free in mlx5e_clone_flow_attr_for_post_act()
====================

Link: https://lore.kernel.org/r/20220309213755.610202-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 fixes 2022-03-09

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: SHAMPO, reduce TIR indication
  net/mlx5e: Lag, Only handle events from highest priority multipath entry
  net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
  net/mlx5: Fix a race on command flush flow
  net/mlx5: Fix size field in bufferx_reg struct
====================

Link: https://lore.kernel.org/r/20220309201517.589132-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull block fix from Jens Axboe:
 "Just a single fix for a regression that occured in this merge window"

* tag 'block-5.17-2022-03-10' of git://git.kernel.dk/linux-block:
  block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection

Pull staging driver fixes from Greg KH:
 "Here are three small fixes for staging drivers for 5.17-rc8 or -final,
  which ever comes next.

  They resolve some reported problems:

   - rtl8723bs wifi driver deadlock fix for reported problem that is a
     revert of a previous patch. Also a documentation fix is added so
     that the same problem hopefully can not come back again.

   - gdm724x driver use-after-free fix for a reported problem.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8723bs: Improve the comment explaining the locking rules
  staging: rtl8723bs: Fix access-point mode deadlock
  staging: gdm724x: fix use after free in gdm_lte_rx()

Mat Martineau says:

====================
mptcp: selftests: Refactor join tests

The mptcp_join.sh selftest is the largest and most complex self test for
MPTCP, and it is frequently used by MPTCP developers to reproduce bugs
and verify fixes. As it grew in size and execution time, it became more
cumbersome to use.

These changes do some much-needed cleanup, and add developer-friendly
features to make it easier to see failures and run a subset of the tests
when verifying fixes.
====================

Link: https://lore.kernel.org/r/20220309191636.258232-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes a few issues reported by ShellCheck:

- SC2068: Double quote array expansions to avoid re-splitting elements.
- SC2206: Quote to prevent word splitting/globbing, or split robustly
          with mapfile or read -a.
- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
- SC2155: Declare and assign separately to avoid masking return values.
- SC2162: read without -r will mangle backslashes.
- SC2219: Instead of 'let expr', prefer (( expr )) .
- SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly
          with $?.
- SC2236: Use -n instead of ! -z.
- SC2004: $/${} is unnecessary on arithmetic variables.
- SC2012: Use find instead of ls to better handle non-alphanumeric
          filenames.
- SC2002: Useless cat. Consider 'cmd < file | ..' or 'cmd file | ..'
          instead.

SC2086 (Double quotes to prevent globbing and word splitting) is ignored
because it is controlled for the moment and there are too many to
change.

While at it, also fixed the alignment in one comment.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As explained on ShellCheck's wiki [1], it is recommended to avoid
backquotes `...` in favour of parenthesis $(...):

> Backtick command substitution `...` is legacy syntax with several
> issues.
>
> - It has a series of undefined behaviors related to quoting in POSIX.
> - It imposes a custom escaping mode with surprising results.
> - It's exceptionally hard to nest.
>
> $(...) command substitution has none of these problems, and is
> therefore strongly encouraged.

[1] https://www.shellcheck.net/wiki/SC2006Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Some vars are redefined in different places. Best to avoid this
classical Bash pitfall where variables are accidentally overridden by
other functions because the proper scope has not been defined.

Most issues are with loops: typically 'i' is used in for-loops but if it
is not global, calling a function from a for-loop also doing a for-loop
with the same non local 'i' variable causes troubles because the first
'i' will be assigned to another value. To prevent such issues, the
iterator variable is now declared as local just before the loop. If it
is always done like this, issues are avoided.

To distinct between local and non local variables, all non local ones
are defined at the beginning of the script. The others are now defined
with the "local" keyword.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is more readable and reduces duplicated commands.

This might also be useful to add v6 support and switch to nftables.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With ~100 tests, it helps to have this summary at the end not to scroll
to find which one has failed.

It is especially interseting when looking at the output produced by the
CI where the kernel logs from the serial are mixed together.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Running a specific test by giving the ID is often what we want: the CI
reports an issue with the Nth test, it is reproducible with:

  ./mptcp_join.sh N

But this might not work when there is a need to find which commit has
introduced a regression making a test unstable: failing from time to
time. Indeed, a specific test is not attached to one ID: the ID is in
fact a counter. It means the same test can have a different ID if other
tests have been added/removed before this unstable one.

Remembering the current test can also help listing failed tests at the
end.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Often, it is needed to run one specific test.

There are options to run subgroups of tests but when only one fails, no
need to run all the subgroup. So far, the solution was to edit the
script to comment the tests that are not needed but that's not ideal.

Now, it is possible to run one specific test by giving the ID of the
tests that are going to be validated, e.g.

  ./mptcp_join.sh 36 37

This is cleaner and saves time.

Technically, the reset* functions now return 0 if the test can be
executed. This naturally creates sections per test in the code which is
also helpful to understand what a test is exactly doing.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Best to always reset this env var before each test to avoid surprising
behaviour depending on the order tests are running.

Also clearly set it for the last failing links test is also needed when
only this test is executed.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When adding a new tests group, it has to be defined in multiple places:

- in the all_tests() function
- in the 'usage()' function
- in the getopts: short option + what to do when the option is used

Because it is easy to forget one of them, it is useful to have to define
them only once.

Note: only using an associative array would simplify the code but the
entries are stored in a hashtable and iterating over the different items
doesn't give the same order as the one used in the declaration of this
array. Because we want to run these tests in the same order as before, a
"simple" array is used first.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch dropped the msg argument of chk_csum_nr, to unify chk_csum_nr
with other chk_*_nr functions.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MISR1 was cleared twice but the original author intention was probably
to clear MISR1 & MISR2 to completely disable interrupts. Fix it to
clear MISR2.

Fixes: 87461f7a ("net: phy: DP83822 initial driver submission")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: 7349a74e ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>