- 06 Jan, 2017 40 commits
-
-
Christian Lamparter authored
commit f06f35c6 upstream. This patch fixes a off-by-one in the "watchdog: qcom: add option for standalone watchdog not in timer block" patch that causes the following panic on boot: > Unhandled fault: external abort on non-linefetch (0x1008) at 0xc8874002 > pgd = c0204000 > [c8874002] *pgd=87806811, *pte=0b017653, *ppte=0b017453 > Internal error: : 1008 [#1] SMP ARM > CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.6 #0 > Hardware name: Generic DT based system > PC is at 0xc02222f4 > LR is at 0x1 > pc : [<c02222f4>] lr : [<00000001>] psr: 00000113 > sp : c782fc98 ip : 00000003 fp : 00000000 > r10: 00000004 r9 : c782e000 r8 : c04ab98c > r7 : 00000001 r6 : c8874002 r5 : c782fe00 r4 : 00000002 > r3 : 00000000 r2 : c782fe00 r1 : 00100000 r0 : c8874002 > Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none > Control: 10c5387d Table: 8020406a DAC: 00000051 > Process swapper/0 (pid: 1, stack limit = 0xc782e210) > Stack: (0xc782fc98 to 0xc7830000) > [...] The WDT_STS (status) needs to be translated via wdt_addr as well. fixes: f0d9d0f4 ("watchdog: qcom: add option for standalone watchdog not in timer block") Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
commit 9eff1140 upstream. Systemd on reboot enables shutdown watchdog that leaves the watchdog device open to ensure that even if power down process get stuck the platform reboots nonetheless. The iamt_wdt is an alarm-only watchdog and can't reboot system, but the FW will generate an alarm event reboot was completed in time, as the watchdog is not automatically disabled during power cycle. So we should request stop watchdog on reboot to eliminate wrong alarm from the FW. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
-
Konstantin Khlebnikov authored
commit 4d1f0fb0 upstream. NMI handler doesn't call set_irq_regs(), it's set only by normal IRQ. Thus get_irq_regs() returns NULL or stale registers snapshot with IP/SP pointing to the code interrupted by IRQ which was interrupted by NMI. NULL isn't a problem: in this case watchdog calls dump_stack() and prints full stack trace including NMI. But if we're stuck in IRQ handler then NMI watchlog will print stack trace without IRQ part at all. This patch uses registers snapshot passed into NMI handler as arguments: these registers point exactly to the instruction interrupted by NMI. Fixes: 55537871 ("kernel/watchdog.c: perform all-CPU backtrace in case of hard lockup") Link: http://lkml.kernel.org/r/146771764784.86724.6006627197118544150.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Pavel Shilovsky authored
commit e3d240e9 upstream. If maxBuf is not 0 but less than a size of SMB2 lock structure we can end up with a memory corruption. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 4772c795 upstream. Acked-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 53e0e11e upstream. We can not unlock/lock cifs_tcp_ses_lock while walking through ses and tcon lists because it can corrupt list iterator pointers and a tcon structure can be released if we don't hold an extra reference. Fix it by moving a reconnect process to a separate delayed work and acquiring a reference to every tcon that needs to be reconnected. Also do not send an echo request on newly established connections. Signed-off-by:
-
Takashi Iwai authored
commit 2fc995a8 upstream. When ASoC Intel SST Medfield driver is probed but without codec / card assigned, it causes an Oops and freezes the kernel at suspend/resume, PM: Suspending system (freeze) Suspending console(s) (use no_console_suspend to debug) BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffffc09d9409>] sst_soc_prepare+0x19/0xa0 [snd_soc_sst_mfld_platform] Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 1552 Comm: systemd-sleep Tainted: G W 4.9.0-rc6-1.g5f5c2ad-default #1 Call Trace: [<ffffffffb45318f9>] dpm_prepare+0x209/0x460 [<ffffffffb4531b61>] dpm_suspend_start+0x11/0x60 [<ffffffffb40d3cc2>] suspend_devices_and_enter+0xb2/0x710 [<ffffffffb40d462e>] pm_suspend+0x30e/0x390 [<ffffffffb40d2eba>] state_store+0x8a/0x90 [<ffffffffb43c670f>] kobj_attr_store+0xf/0x20 [<ffffffffb42b0d97>] sysfs_kf_write+0x37/0x40 [<ffffffffb42b02bc>] kernfs_fop_write+0x11c/0x1b0 [<ffffffffb422be68>] __vfs_write+0x28/0x140 [<ffffffffb43728a8>] ? apparmor_file_permission+0x18/0x20 [<ffffffffb433b2ab>] ? security_file_permission+0x3b/0xc0 [<ffffffffb422d095>] vfs_write+0xb5/0x1a0 [<ffffffffb422e3d6>] SyS_write+0x46/0xa0 [<ffffffffb4719fbb>] entry_SYSCALL_64_fastpath+0x1e/0xad Add proper NULL checks in the PM code of mdfld driver. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Benjamin Marzinski authored
commit 314c25c5 upstream. In dm_sm_metadata_create() we temporarily change the dm_space_map operations from 'ops' (whose .destroy function deallocates the sm_metadata) to 'bootstrap_ops' (whose .destroy function doesn't). If dm_sm_metadata_create() fails in sm_ll_new_metadata() or sm_ll_extend(), it exits back to dm_tm_create_internal(), which calls dm_sm_destroy() with the intention of freeing the sm_metadata, but it doesn't (because the dm_space_map operations is still set to 'bootstrap_ops'). Fix this by setting the dm_space_map operations back to 'ops' if dm_sm_metadata_create() fails when it is set to 'bootstrap_ops'. Signed-off-by:
Benjamin Marzinski <bmarzins@redhat.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Heinz Mauelshagen authored
commit 11e29684 upstream. Commit ecbfb9f1 ("dm raid: add raid level takeover support") moved the configure_discard_support() call from raid_ctr() to raid_preresume(). Enabling/disabling discard _must_ happen during table load (through the .ctr hook). Fix this regression by moving the configure_discard_support() call back to raid_ctr(). Fixes: ecbfb9f1 ("dm raid: add raid level takeover support") Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit d15bb3a6 upstream. It is required to hold the queue lock when calling blk_run_queue_async() to avoid that a race between blk_run_queue_async() and blk_cleanup_queue() is triggered. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Ondrej Kozina authored
commit 265e9098 upstream. In crypt_set_key(), if a failure occurs while replacing the old key (e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag set. Otherwise, the crypto layer would have an invalid key that still has DM_CRYPT_KEY_VALID flag set. Signed-off-by:
Ondrej Kozina <okozina@redhat.com> Reviewed-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Wei Yongjun authored
commit bff7e067 upstream. Fix to return error code -EINVAL instead of 0, as is done elsewhere in this function. Fixes: e80d1c80 ("dm: do not override error code returned from dm_get_device()") Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
-
Bart Van Assche authored
commit 301fc3f5 upstream. When dm_table_set_type() is used by a target to establish a DM table's type (e.g. DM_TYPE_MQ_REQUEST_BASED in the case of DM multipath) the DM core must go on to verify that the devices in the table are compatible with the established type. Fixes: e83068a5 ("dm mpath: add optional "queue_mode" feature") Signed-off-by:
-
Mike Snitzer authored
commit 6936c12c upstream. An earlier DM multipath table could have been build ontop of underlying devices that were all using blk-mq. In that case, if that active multipath table is replaced with an empty DM multipath table (that reflects all paths have failed) then it is important that the 'all_blk_mq' state of the active table is transfered to the new empty DM table. Otherwise dm-rq.c:dm_old_prep_tio() will incorrectly clone a request that isn't needed by the DM multipath target when it is to issue IO to an underlying blk-mq device. Fixes: e83068a5 ("dm mpath: add optional "queue_mode" feature") Reported-by:
-
Bart Van Assche authored
commit bc27c01b upstream. The meaning of the BLK_MQ_S_STOPPED flag is "do not call .queue_rq()". Hence modify blk_mq_make_request() such that requests are queued instead of issued if a queue has been stopped. Reported-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Stephen Boyd authored
commit 91291d9a upstream. Joonyoung Shim reported an interesting problem on his ARM octa-core Odoroid-XU3 platform. During system suspend, dev_pm_opp_put_regulator() was failing for a struct device for which dev_pm_opp_set_regulator() is called earlier. This happened because an earlier call to dev_pm_opp_of_cpumask_remove_table() function (from cpufreq-dt.c file) removed all the entries from opp_table->dev_list apart from the last CPU device in the cpumask of CPUs sharing the OPP. But both dev_pm_opp_set_regulator() and dev_pm_opp_put_regulator() routines get CPU device for the first CPU in the cpumask. And so the OPP core failed to find the OPP table for the struct device. This patch attempts to fix this problem by returning a pointer to the opp_table from dev_pm_opp_set_regulator() and using that as the parameter to dev_pm_opp_put_regulator(). This ensures that the dev_pm_opp_put_regulator() doesn't fail to find the opp table. Note that similar design problem also exists with other dev_pm_opp_put_*() APIs, but those aren't used currently by anyone and so we don't need to update them for now. Reported-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> [ Viresh: Wrote commit log and tested on exynos 5250 ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Felipe Balbi authored
commit eaa496ff upstream. ep->mult is supposed to be set to Isochronous and Interrupt Endapoint's multiplier value. This value is computed from different places depending on the link speed. If we're dealing with HighSpeed, then it's part of bits [12:11] of wMaxPacketSize. This case wasn't taken into consideration before. While at that, also make sure the ep->mult defaults to one so drivers can use it unconditionally and assume they'll never multiply ep->maxpacket to zero. Cc: <stable@vger.kernel.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Mel Gorman authored
commit a6de734b upstream. Vlastimil Babka pointed out that commit 479f854a ("mm, page_alloc: defer debugging checks of pages allocated from the PCP") will allow the per-cpu list counter to be out of sync with the per-cpu list contents if a struct page is corrupted. The consequence is an infinite loop if the per-cpu lists get fully drained by free_pcppages_bulk because all the lists are empty but the count is positive. The infinite loop occurs here do { batch_free++; if (++migratetype == MIGRATE_PCPTYPES) migratetype = 0; list = &pcp->lists[migratetype]; } while (list_empty(list)); What the user sees is a bad page warning followed by a soft lockup with interrupts disabled in free_pcppages_bulk(). This patch keeps the accounting in sync. Fixes: 479f854a ("mm, page_alloc: defer debugging checks of pages allocated from the PCP") Link: http://lkml.kernel.org/r/20161202112951.23346-2-mgorman@techsingularity.netSigned-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Shaohua Li authored
commit 5f33a080 upstream. Our system uses significantly more slab memory with memcg enabled with the latest kernel. With 3.10 kernel, slab uses 2G memory, while with 4.6 kernel, 6G memory is used. The shrinker has problem. Let's see we have two memcg for one shrinker. In do_shrink_slab: 1. Check cg1. nr_deferred = 0, assume total_scan = 700. batch size is 1024, then no memory is freed. nr_deferred = 700 2. Check cg2. nr_deferred = 700. Assume freeable = 20, then total_scan = 10 or 40. Let's assume it's 10. No memory is freed. nr_deferred = 10. The deferred share of cg1 is lost in this case. kswapd will free no memory even run above steps again and again. The fix makes sure one memcg's deferred share isn't lost. Link: http://lkml.kernel.org/r/2414be961b5d25892060315fbb56bb19d81d0c07.1476227351.git.shli@fb.comSigned-off-by:
Shaohua Li <shli@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
-
Solganik Alexander authored
commit e4fcf07c upstream. When removing a namespace we delete it from the subsystem namespaces list with list_del_init which allows us to know if it is enabled or not. The problem is that list_del_init initialize the list next and does not respect the RCU list-traversal we do on the IO path for locating a namespace. Instead we need to use list_del_rcu which is allowed to run concurrently with the _rcu list-traversal primitives (keeps list next intact) and guarantees concurrent nvmet_find_naespace forward progress. By changing that, we cannot rely on ns->dev_link for knowing if the namspace is enabled, so add enabled indicator entry to nvmet_ns for that. Signed-off-by:
Solganik Alexander <sashas@lightbitslabs.com> Signed-off-by:
-
Omar Sandoval authored
commit b4a567e8 upstream. ->queue_rq() should return one of the BLK_MQ_RQ_QUEUE_* constants, not an errno. Fixes: f4aa4c7b ("block: loop: convert to per-device workqueue") Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Jaegeuk Kim authored
commit e87f7329 upstream. In the last ilen case, i was already increased, resulting in accessing out- of-boundary entry of do_replace and blkaddr. Fix to check ilen first to exit the loop. Fixes: 2aa8fbb9693020 ("f2fs: refactor __exchange_data_block for speed up") Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Nicolai Stange authored
commit 05e6ea26 upstream. The struct file_operations instance serving the f2fs/status debugfs file lacks an initialization of its ->owner. This means that although that file might have been opened, the f2fs module can still get removed. Any further operation on that opened file, releasing included, will cause accesses to unmapped memory. Indeed, Mike Marshall reported the following: BUG: unable to handle kernel paging request at ffffffffa0307430 IP: [<ffffffff8132a224>] full_proxy_release+0x24/0x90 <...> Call Trace: [] __fput+0xdf/0x1d0 [] ____fput+0xe/0x10 [] task_work_run+0x8e/0xc0 [] do_exit+0x2ae/0xae0 [] ? __audit_syscall_entry+0xae/0x100 [] ? syscall_trace_enter+0x1ca/0x310 [] do_group_exit+0x44/0xc0 [] SyS_exit_group+0x14/0x20 [] do_syscall_64+0x61/0x150 [] entry_SYSCALL64_slow_path+0x25/0x25 <...> ---[ end trace f22ae883fa3ea6b8 ]--- Fixing recursive fault but reboot is needed! Fix this by initializing the f2fs/status file_operations' ->owner with THIS_MODULE. This will allow debugfs to grab a reference to the f2fs module upon any open on that file, thus preventing it from getting removed. Fixes: 902829aa ("f2fs: move proc files to debugfs") Reported-by:
Mike Marshall <hubcap@omnibond.com> Reported-by:
Martin Brandenburg <martin@omnibond.com> Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
-
Jaegeuk Kim authored
commit 204706c7 upstream. This reverts commit 1beba1b3. The perpcu_counter doesn't provide atomicity in single core and consume more DRAM. That incurs fs_mark test failure due to ENOMEM. Signed-off-by:
-
Sergey Karamov authored
commit 73b92a2a upstream. Currently data journalling is incompatible with encryption: enabling both at the same time has never been supported by design, and would result in unpredictable behavior. However, users are not precluded from turning on both features simultaneously. This change programmatically replaces data journaling for encrypted regular files with ordered data journaling mode. Background: Journaling encrypted data has not been supported because it operates on buffer heads of the page in the page cache. Namely, when the commit happens, which could be up to five seconds after caching, the commit thread uses the buffer heads attached to the page to copy the contents of the page to the journal. With encryption, it would have been required to keep the bounce buffer with ciphertext for up to the aforementioned five seconds, since the page cache can only hold plaintext and could not be used for journaling. Alternatively, it would be required to setup the journal to initiate a callback at the commit time to perform deferred encryption - in this case, not only would the data have to be written twice, but it would also have to be encrypted twice. This level of complexity was not justified for a mode that in practice is very rarely used because of the overhead from the data journalling. Solution: If data=journaled has been set as a mount option for a filesystem, or if journaling is enabled on a regular file, do not perform journaling if the file is also encrypted, instead fall back to the data=ordered mode for the file. Rationale: The intent is to allow seamless and proper filesystem operation when journaling and encryption have both been enabled, and have these two conflicting features gracefully resolved by the filesystem. Fixes: 44614711Signed-off-by:
Sergey Karamov <skaramov@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Dan Carpenter authored
commit 578620f4 upstream. We should set the error code if kzalloc() fails. Fixes: 67cf5b09 ("ext4: add the basic function for inline data support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Darrick J. Wong authored
commit 7e6e1ef4 upstream. Don't load an inode with a negative size; this causes integer overflow problems in the VFS. [ Added EXT4_ERROR_INODE() to mark file system as corrupted. -TYT] Fixes: a48380f7 (ext4: rename i_dir_acl to i_size_high) Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Theodore Ts'o authored
commit c48ae41b upstream. The commit "ext4: sanity check the block and cluster size at mount time" should prevent any problems, but in case the superblock is modified while the file system is mounted, add an extra safety check to make sure we won't overrun the allocated buffer. Signed-off-by:
-
Theodore Ts'o authored
commit 5aee0f8a upstream. Fix a large number of problems with how we handle mount options in the superblock. For one, if the string in the superblock is long enough that it is not null terminated, we could run off the end of the string and try to interpret superblocks fields as characters. It's unlikely this will cause a security problem, but it could result in an invalid parse. Also, parse_options is destructive to the string, so in some cases if there is a comma-separated string, it would be modified in the superblock. (Fortunately it only happens on file systems with a 1k block size.) Signed-off-by:
-
Theodore Ts'o authored
commit cd6bb35b upstream. Centralize the checks for inodes_per_block and be more strict to make sure the inodes_per_block_group can't end up being zero. Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Chandan Rajendra authored
commit 30a9d7af upstream. The number of 'counters' elements needed in 'struct sg' is super_block->s_blocksize_bits + 2. Presently we have 16 'counters' elements in the array. This is insufficient for block sizes >= 32k. In such cases the memcpy operation performed in ext4_mb_seq_groups_show() would cause stack memory corruption. Fixes: c9de560dSigned-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Chandan Rajendra authored
commit 69e43e8c upstream. 'border' variable is set to a value of 2 times the block size of the underlying filesystem. With 64k block size, the resulting value won't fit into a 16-bit variable. Hence this commit changes the data type of 'border' to 'unsigned int'. Fixes: c9de560dSigned-off-by:
-
Alex Porosanu authored
commit d128af17 upstream. The AEAD givenc descriptor relies on moving the IV through the output FIFO and then back to the CTX2 for authentication. The SEQ FIFO STORE could be scheduled before the data can be read from OFIFO, especially since the SEQ FIFO LOAD needs to wait for the SEQ FIFO LOAD SKIP to finish first. The SKIP takes more time when the input is SG than when it's a contiguous buffer. If the SEQ FIFO LOAD is not scheduled before the STORE, the DECO will hang waiting for data to be available in the OFIFO so it can be transferred to C2. In order to overcome this, first force transfer of IV to C2 by starting the "cryptlen" transfer first and then starting to store data from OFIFO to the output buffer. Fixes: 1acebad3 ("crypto: caam - faster aead implementation") Signed-off-by:
Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric W. Biederman authored
commit 64b875f7 upstream. When the flag PT_PTRACE_CAP was added the PTRACE_TRACEME path was overlooked. This can result in incorrect behavior when an application like strace traces an exec of a setuid executable. Further PT_PTRACE_CAP does not have enough information for making good security decisions as it does not report which user namespace the capability is in. This has already allowed one mistake through insufficient granulariy. I found this issue when I was testing another corner case of exec and discovered that I could not get strace to set PT_PTRACE_CAP even when running strace as root with a full set of caps. This change fixes the above issue with strace allowing stracing as root a setuid executable without disabling setuid. More fundamentaly this change allows what is allowable at all times, by using the correct information in it's decision. Fixes: 4214e42f96d4 ("v2.4.9.11 -> v2.4.9.12") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Linus Torvalds authored
commit d05c5f7b upstream. We truncated the possible read iterator to s_maxbytes in commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"), but our end condition handling was wrong: it's not an error to try to read at the end of the file. Reading past the end should return EOF (0), not EINVAL. See for example https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1649342 http://lists.gnu.org/archive/html/bug-coreutils/2016-12/msg00008.html where a md5sum of a maximally sized file fails because the final read is exactly at s_maxbytes. Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Reported-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Wei Fang <fangwei1@huawei.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Eric W. Biederman authored
commit bfedb589 upstream. During exec dumpable is cleared if the file that is being executed is not readable by the user executing the file. A bug in ptrace_may_access allows reading the file if the executable happens to enter into a subordinate user namespace (aka clone(CLONE_NEWUSER), unshare(CLONE_NEWUSER), or setns(fd, CLONE_NEWUSER). This problem is fixed with only necessary userspace breakage by adding a user namespace owner to mm_struct, captured at the time of exec, so it is clear in which user namespace CAP_SYS_PTRACE must be present in to be able to safely give read permission to the executable. The function ptrace_may_access is modified to verify that the ptracer has CAP_SYS_ADMIN in task->mm->user_ns instead of task->cred->user_ns. This ensures that if the task changes it's cred into a subordinate user namespace it does not become ptraceable. The function ptrace_attach is modified to only set PT_PTRACE_CAP when CAP_SYS_PTRACE is held over task->mm->user_ns. The intent of PT_PTRACE_CAP is to be a flag to note that whatever permission changes the task might go through the tracer has sufficient permissions for it not to be an issue. task->cred->user_ns is always the same as or descendent of mm->user_ns. Which guarantees that having CAP_SYS_PTRACE over mm->user_ns is the worst case for the tasks credentials. To prevent regressions mm->dumpable and mm->user_ns are not considered when a task has no mm. As simply failing ptrace_may_attach causes regressions in privileged applications attempting to read things such as /proc/<pid>/stat Acked-by:
Kees Cook <keescook@chromium.org> Tested-by:
Cyrill Gorcunov <gorcunov@openvz.org> Fixes: 8409cca7 ("userns: allow ptrace from non-init user namespaces") Signed-off-by:
-
NeilBrown authored
commit bcc7f5b4 upstream. bdev->bd_contains is not stable before calling __blkdev_get(). When __blkdev_get() is called on a parition with ->bd_openers == 0 it sets bdev->bd_contains = bdev; which is not correct for a partition. After a call to __blkdev_get() succeeds, ->bd_openers will be > 0 and then ->bd_contains is stable. When FMODE_EXCL is used, blkdev_get() calls bd_start_claiming() -> bd_prepare_to_claim() -> bd_may_claim() This call happens before __blkdev_get() is called, so ->bd_contains is not stable. So bd_may_claim() cannot safely use ->bd_contains. It currently tries to use it, and this can lead to a BUG_ON(). This happens when a whole device is already open with a bd_holder (in use by dm in my particular example) and two threads race to open a partition of that device for the first time, one opening with O_EXCL and one without. The thread that doesn't use O_EXCL gets through blkdev_get() to __blkdev_get(), gains the ->bd_mutex, and sets bdev->bd_contains = bdev; Immediately thereafter the other thread, using FMODE_EXCL, calls bd_start_claiming() from blkdev_get(). This should fail because the whole device has a holder, but because bdev->bd_contains == bdev bd_may_claim() incorrectly reports success. This thread continues and blocks on bd_mutex. The first thread then sets bdev->bd_contains correctly and drops the mutex. The thread using FMODE_EXCL then continues and when it calls bd_may_claim() again in: BUG_ON(!bd_may_claim(bdev, whole, holder)); The BUG_ON fires. Fix this by removing the dependency on ->bd_contains in bd_may_claim(). As bd_may_claim() has direct access to the whole device, it can simply test if the target bdev is the whole device. Fixes: 6b4517a7 ("block: implement bd_claiming and claiming block") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Aleksa Sarai authored
commit 613cc2b6 upstream. If you have a process that has set itself to be non-dumpable, and it then undergoes exec(2), any CLOEXEC file descriptors it has open are "exposed" during a race window between the dumpable flags of the process being reset for exec(2) and CLOEXEC being applied to the file descriptors. This can be exploited by a process by attempting to access /proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE. The race in question is after set_dumpable has been (for get_link, though the trace is basically the same for readlink): [vfs] -> proc_pid_link_inode_operations.get_link -> proc_pid_get_link -> proc_fd_access_allowed -> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS); Which will return 0, during the race window and CLOEXEC file descriptors will still be open during this window because do_close_on_exec has not been called yet. As a result, the ordering of these calls should be reversed to avoid this race window. This is of particular concern to container runtimes, where joining a PID namespace with file descriptors referring to the host filesystem can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect against access of CLOEXEC file descriptors -- file descriptors which may reference filesystem objects the container shouldn't have access to). Cc: dev@opencontainers.org Reported-by:
Michael Crosby <crosbymichael@gmail.com> Signed-off-by:
Aleksa Sarai <asarai@suse.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Eric W. Biederman authored
commit f84df2a6 upstream. When the user namespace support was merged the need to prevent ptrace from revealing the contents of an unreadable executable was overlooked. Correct this oversight by ensuring that the executed file or files are in mm->user_ns, by adjusting mm->user_ns. Use the new function privileged_wrt_inode_uidgid to see if the executable is a member of the user namespace, and as such if having CAP_SYS_PTRACE in the user namespace should allow tracing the executable. If not update mm->user_ns to the parent user namespace until an appropriate parent is found. Reported-by:
Jann Horn <jann@thejh.net> Fixes: 9e4a36ec ("userns: Fail exec for suid and sgid binaries with ids outside our user namespace.") Signed-off-by:
-
Wang Xiaoguang authored
commit 69ae5e44 upstream. Indeed this just make the behavior similar to xfs when process has fatal signals pending, and it'll make fstests/generic/298 happy. Signed-off-by:
Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
