Skip to content

L
linux
Switch branch/tag
  1. 22 Jan, 2022 2 commits
  3. 21 Jan, 2022 21 commits
  5. 20 Jan, 2022 17 commits
    • Joe Damato's avatar
      i40e: fix unsigned stat widths · 3b8428b8
      Joe Damato authored 
      Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match
the width of the stats counters in struct i40e_rx_queue_stats.

Update debugfs code to use the correct format specifier for u64.

Fixes: 41c445ff ("i40e: main driver core")
Signed-off-by: default avatarJoe Damato <jdamato@fastly.com>
Reported-by: default avatarkernel test robot <lkp@intel.com>
Tested-by: default avatarGurucharan G <gurucharanx.g@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      3b8428b8
    • Karen Sornek's avatar
      i40e: Fix for failed to init adminq while VF reset · 0f344c81
      Karen Sornek authored 
      Fix for failed to init adminq: -53 while VF is resetting via MAC
address changing procedure.
Added sync module to avoid reading deadbeef value in reinit adminq
during software reset.
Without this patch it is possible to trigger VF reset procedure
during reinit adminq. This resulted in an incorrect reading of
value from the AQP registers and generated the -53 error.

Fixes: 5c3c48ac ("i40e: implement virtual device interface")
Signed-off-by: default avatarGrzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: default avatarKaren Sornek <karen.sornek@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      0f344c81
    • Sylwester Dziedziuch's avatar
      i40e: Fix queues reservation for XDP · 92947844
      Sylwester Dziedziuch authored 
      When XDP was configured on a system with large number of CPUs
and X722 NIC there was a call trace with NULL pointer dereference.

i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12
i40e 0000:87:00.0: setup of MAIN VSI failed

BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e]
Call Trace:
? i40e_reconfig_rss_queues+0x130/0x130 [i40e]
dev_xdp_install+0x61/0xe0
dev_xdp_attach+0x18a/0x4c0
dev_change_xdp_fd+0x1e6/0x220
do_setlink+0x616/0x1030
? ahci_port_stop+0x80/0x80
? ata_qc_issue+0x107/0x1e0
? lock_timer_base+0x61/0x80
? __mod_timer+0x202/0x380
rtnl_setlink+0xe5/0x170
? bpf_lsm_binder_transaction+0x10/0x10
? security_capable+0x36/0x50
rtnetlink_rcv_msg+0x121/0x350
? rtnl_calcit.isra.0+0x100/0x100
netlink_rcv_skb+0x50/0xf0
netlink_unicast+0x1d3/0x2a0
netlink_sendmsg+0x22a/0x440
sock_sendmsg+0x5e/0x60
__sys_sendto+0xf0/0x160
? __sys_getsockname+0x7e/0xc0
? _copy_from_user+0x3c/0x80
? __sys_setsockopt+0xc8/0x1a0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f83fa7a39e0

This was caused by PF queue pile fragmentation due to
flow director VSI queue being placed right after main VSI.
Because of this main VSI was not able to resize its
queue allocation for XDP resulting in no queues allocated
for main VSI when XDP was turned on.

Fix this by always allocating last queue in PF queue pile
for a flow director VSI.

Fixes: 41c445ff ("i40e: main driver core")
Fixes: 74608d17 ("i40e: add support for XDP_TX action")
Signed-off-by: default avatarSylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: default avatarMateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: default avatarMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: default avatarKiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      92947844
    • Jedrzej Jagielski's avatar
      i40e: Fix issue when maximum queues is exceeded · d701658a
      Jedrzej Jagielski authored 
      Before this patch VF interface vanished when
maximum queue number was exceeded. Driver tried
to add next queues even if there was not enough
space. PF sent incorrect number of queues to
the VF when there were not enough of them.

Add an additional condition introduced to check
available space in 'qp_pile' before proceeding.
This condition makes it impossible to add queues
if they number is greater than the number resulting
from available space.
Also add the search for free space in PF queue
pair piles.

Without this patch VF interfaces are not seen
when available space for queues has been
exceeded and following logs appears permanently
in dmesg:
"Unable to get VF config (-32)".
"VF 62 failed opcode 3, retval: -5"
"Unable to get VF config due to PF error condition, not retrying"

Fixes: 7daa6bf3 ("i40e: driver core headers")
Fixes: 41c445ff ("i40e: main driver core")
Signed-off-by: default avatarJaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: default avatarSlawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: default avatarJedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      d701658a
    • Jedrzej Jagielski's avatar
      i40e: Increase delay to 1 s after global EMP reset · 9b13bd53
      Jedrzej Jagielski authored 
      Recently simplified i40e_rebuild causes that FW sometimes
is not ready after NVM update, the ping does not return.

Increase the delay in case of EMP reset.
Old delay of 300 ms was introduced for specific cards for 710 series.
Now it works for all the cards and delay was increased.

Fixes: 1fa51a65 ("i40e: Add delay after EMP reset for firmware to recover")
Signed-off-by: default avatarArkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: default avatarJedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: default avatarGurucharan G <gurucharanx.g@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      9b13bd53
    • David S. Miller's avatar
      Merge branch 'stmmac-fixes' · 57afdc0a
      David S. Miller authored 
      Yuji Ishikawa says:

====================
net: stmmac: dwmac-visconti: Fix bit definitions and clock configuration for RMII mode

This series is a fix for RMII/MII operation mode of the dwmac-visconti driver.
It is composed of two parts:

* 1/2: fix constant definitions for cleared bits in ETHER_CLK_SEL register
* 2/2: fix configuration of ETHER_CLK_SEL register for running in RMII operation mode.

  net: stmmac: dwmac-visconti: Fix bit definitions for ETHER_CLK_SEL
    v1 -> v2:
      - added Fixes tag to commit message

  net: stmmac: dwmac-visconti: Fix clock configuration for RMII mode
    v1 -> v2:
      - added Fixes tag to commit message
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      57afdc0a
    • Yuji Ishikawa's avatar
      net: stmmac: dwmac-visconti: Fix clock configuration for RMII mode · 0959bc4b
      Yuji Ishikawa authored 
      Bit pattern of the ETHER_CLOCK_SEL register for RMII/MII mode should be fixed.
Also, some control bits should be modified with a specific sequence.

Fixes: b38dd98f ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: default avatarYuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: default avatarNobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0959bc4b
    • Yuji Ishikawa's avatar
      net: stmmac: dwmac-visconti: Fix bit definitions for ETHER_CLK_SEL · 1ba1a4a9
      Yuji Ishikawa authored 
      just 0 should be used to represent cleared bits

* ETHER_CLK_SEL_DIV_SEL_20
* ETHER_CLK_SEL_TX_CLK_EXT_SEL_IN
* ETHER_CLK_SEL_RX_CLK_EXT_SEL_IN
* ETHER_CLK_SEL_TX_CLK_O_TX_I
* ETHER_CLK_SEL_RMII_CLK_SEL_IN

Fixes: b38dd98f ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: default avatarYuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: default avatarNobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1ba1a4a9
    • Ido Schimmel's avatar
      ipv6_tunnel: Rate limit warning messages · 6cee105e
      Ido Schimmel authored 
      The warning messages can be invoked from the data path for every packet
transmitted through an ip6gre netdev, leading to high CPU utilization.

Fix that by rate limiting the messages.

Fixes: 09c6bbf0 ("[IPV6]: Do mandatory IPv6 tunnel endpoint checks in realtime")
Reported-by: default avatarMaksym Yaremchuk <maksymy@nvidia.com>
Tested-by: default avatarMaksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Reviewed-by: default avatarAmit Cohen <amcohen@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6cee105e
    • Moshe Tal's avatar
      ethtool: Fix link extended state for big endian · e2f08207
      Moshe Tal authored 
      The link extended sub-states are assigned as enum that is an integer
size but read from a union as u8, this is working for small values on
little endian systems but for big endian this always give 0. Fix the
variable in the union to match the enum size.

Fixes: ecc31c60 ("ethtool: Add link extended state")
Signed-off-by: default avatarMoshe Tal <moshet@nvidia.com>
Reviewed-by: default avatarIdo Schimmel <idosch@nvidia.com>
Tested-by: default avatarIdo Schimmel <idosch@nvidia.com>
Reviewed-by: default avatarGal Pressman <gal@nvidia.com>
Reviewed-by: default avatarAmit Cohen <amcohen@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e2f08207
    • Robert Hancock's avatar
      net: phy: broadcom: hook up soft_reset for BCM54616S · d15c7e87
      Robert Hancock authored 
      A problem was encountered with the Bel-Fuse 1GBT-SFP05 SFP module (which
is a 1 Gbps copper module operating in SGMII mode with an internal
BCM54616S PHY device) using the Xilinx AXI Ethernet MAC core, where the
module would work properly on the initial insertion or boot of the
device, but after the device was rebooted, the link would either only
come up at 100 Mbps speeds or go up and down erratically.

I found no meaningful changes in the PHY configuration registers between
the working and non-working boots, but the status registers seemed to
have a lot of error indications set on the SERDES side of the device on
the non-working boot. I suspect the problem is that whatever happens on
the SGMII link when the device is rebooted and the FPGA logic gets
reloaded ends up putting the module's onboard PHY into a bad state.

Since commit 6e2d85ec ("net: phy: Stop with excessive soft reset")
the genphy_soft_reset call is not made automatically by the PHY core
unless the callback is explicitly specified in the driver structure. For
most of these Broadcom devices, there is probably a hardware reset that
gets asserted to reset the PHY during boot, however for SFP modules
(where the BCM54616S is commonly found) no such reset line exists, so if
the board keeps the SFP cage powered up across a reboot, it will end up
with no reset occurring during reboots.

Hook up the genphy_soft_reset callback for BCM54616S to ensure that a
PHY reset is performed before the device is initialized. This appears to
fix the issue with erratic operation after a reboot with this SFP
module.

Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset")
Signed-off-by: default avatarRobert Hancock <robert.hancock@calian.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d15c7e87
    • Victor Nogueira's avatar
      net: sched: Clarify error message when qdisc kind is unknown · 973bf8fd
      Victor Nogueira authored 
      When adding a tc rule with a qdisc kind that is not supported or not
compiled into the kernel, the kernel emits the following error: "Error:
Specified qdisc not found.". Found via tdc testing when ETS qdisc was not
compiled in and it was not obvious right away what the message meant
without looking at the kernel code.

Change the error message to be more explicit and say the qdisc kind is
unknown.
Signed-off-by: default avatarVictor Nogueira <victor@mojatatu.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      973bf8fd
    • Congyu Liu's avatar
      net: fix information leakage in /proc/net/ptype · 47934e06
      Congyu Liu authored 
      In one net namespace, after creating a packet socket without binding
it to a device, users in other net namespaces can observe the new
`packet_type` added by this packet socket by reading `/proc/net/ptype`
file. This is minor information leakage as packet socket is
namespace aware.

Add a net pointer in `packet_type` to keep the net namespace of
of corresponding packet socket. In `ptype_seq_show`, this net pointer
must be checked when it is not NULL.

Fixes: 2feb27db ("[NETNS]: Minor information leak via /proc/net/ptype file.")
Signed-off-by: default avatarCongyu Liu <liu3101@purdue.edu>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      47934e06
    • Linus Torvalds's avatar
      Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · fa2e1ba3
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, bpf.

  Quite a handful of old regression fixes but most of those are
  pre-5.16.

  Current release - regressions:

   - fix memory leaks in the skb free deferral scheme if upper layer
     protocols are used, i.e. in-kernel TCP readers like TLS

  Current release - new code bugs:

   - nf_tables: fix NULL check typo in _clone() functions

   - change the default to y for Vertexcom vendor Kconfig

   - a couple of fixes to incorrect uses of ref tracking

   - two fixes for constifying netdev->dev_addr

  Previous releases - regressions:

   - bpf:
      - various verifier fixes mainly around register offset handling
        when passed to helper functions
      - fix mount source displayed for bpffs (none -> bpffs)

   - bonding:
      - fix extraction of ports for connection hash calculation
      - fix bond_xmit_broadcast return value when some devices are down

   - phy: marvell: add Marvell specific PHY loopback

   - sch_api: don't skip qdisc attach on ingress, prevent ref leak

   - htb: restore minimal packet size handling in rate control

   - sfp: fix high power modules without diagnostic monitoring

   - mscc: ocelot:
      - don't let phylink re-enable TX PAUSE on the NPI port
      - don't dereference NULL pointers with shared tc filters

   - smsc95xx: correct reset handling for LAN9514

   - cpsw: avoid alignment faults by taking NET_IP_ALIGN into account

   - phy: micrel: use kszphy_suspend/_resume for irq aware devices,
     avoid races with the interrupt

  Previous releases - always broken:

   - xdp: check prog type before updating BPF link

   - smc: resolve various races around abnormal connection termination

   - sit: allow encapsulated IPv6 traffic to be delivered locally

   - axienet: fix init/reset handling, add missing barriers, read the
     right status words, stop queues correctly

   - add missing dev_put() in sock_timestamping_bind_phc()

  Misc:

   - ipv4: prevent accidentally passing RTO_ONLINK to
     ip_route_output_key_hash() by sanitizing flags

   - ipv4: avoid quadratic behavior in netns dismantle

   - stmmac: dwmac-oxnas: add support for OX810SE

   - fsl: xgmac_mdio: add workaround for erratum A-009885"

* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
  ipv4: avoid quadratic behavior in netns dismantle
  net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
  powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
  dt-bindings: net: Document fsl,erratum-a009885
  net/fsl: xgmac_mdio: Add workaround for erratum A-009885
  net: mscc: ocelot: fix using match before it is set
  net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
  net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
  nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
  net: axienet: increase default TX ring size to 128
  net: axienet: fix for TX busy handling
  net: axienet: fix number of TX ring slots for available check
  net: axienet: Fix TX ring slot available check
  net: axienet: limit minimum TX ring size
  net: axienet: add missing memory barriers
  net: axienet: reset core on initialization prior to MDIO access
  net: axienet: Wait for PhyRstCmplt after core reset
  net: axienet: increase reset timeout
  bpf, selftests: Add ringbuf memory type confusion test
  ...
      fa2e1ba3
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · f4484d13
      Linus Torvalds authored 
      Merge more updates from Andrew Morton:
 "55 patches.

  Subsystems affected by this patch series: percpu, procfs, sysctl,
  misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
  hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
  lib: remove redundant assignment to variable ret
  ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
  kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
  lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
  btrfs: use generic Kconfig option for 256kB page size limit
  arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
  configs: introduce debug.config for CI-like setup
  delayacct: track delays from memory compact
  Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
  delayacct: cleanup flags in struct task_delay_info and functions use it
  delayacct: fix incomplete disable operation when switch enable to disable
  delayacct: support swapin delay accounting for swapping without blkio
  panic: remove oops_id
  panic: use error_report_end tracepoint on warnings
  fs/adfs: remove unneeded variable make code cleaner
  FAT: use io_schedule_timeout() instead of congestion_wait()
  hfsplus: use struct_group_attr() for memcpy() region
  nilfs2: remove redundant pointer sbufs
  fs/binfmt_elf: use PT_LOAD p_align values for static PIE
  const_structs.checkpatch: add frequently used ops structs
  ...
      f4484d13
    • Colin Ian King's avatar
      lib: remove redundant assignment to variable ret · b1e78ef3
      Colin Ian King authored 
      The variable ret is being assigned a value that is never read.  If the
for-loop is entered then ret is immediately re-assigned a new value.  If
the for-loop is not executed ret is never read.  The assignment is
redundant and can be removed.

Link: https://lkml.kernel.org/r/20211230134557.83633-1-colin.i.king@gmail.comSigned-off-by: default avatarColin Ian King <colin.i.king@gmail.com>
Reviewed-by: default avatarJarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b1e78ef3
    • Kees Cook's avatar
      ubsan: remove CONFIG_UBSAN_OBJECT_SIZE · 69d0db01
      Kees Cook authored 
      The object-size sanitizer is redundant to -Warray-bounds, and
inappropriately performs its checks at run-time when all information
needed for the evaluation is available at compile-time, making it quite
difficult to use:

  https://bugzilla.kernel.org/show_bug.cgi?id=214861

With -Warray-bounds almost enabled globally, it doesn't make sense to
keep this around.

Link: https://lkml.kernel.org/r/20211203235346.110809-1-keescook@chromium.orgSigned-off-by: default avatarKees Cook <keescook@chromium.org>
Reviewed-by: default avatarMarco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      69d0db01
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7