- 12 Apr, 2021 9 commits
-
-
Felix Fietkau authored
Ensures that header translation is disabled for interfaces that do not support it. Fixes: d4b98c63 ("mt76: mt7615: add support for rx decapsulation offload") Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Resolve the following checkpatch.pl script warning: WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Add mmio.c in order to use mt76_bus_ops throughout the driver. It will be also shared with the future APSoC revision. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Frame reception timestamp (low 32-bits) that indicates the value of the local TSF timer value at the time the first bit of the MAC header in the received frame (PPDU unit) arriving at the MAC. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
This mode is not supported by the hardware Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
With buf uninitialized in mt76_dma_tx_queue_skb_raw, its field skip_unmap could potentially inherit a non-zero value from stack garbage. If this happens, it will cause DMA mappings for MCU command frames to not be unmapped after completion Fixes: 27d5c528 ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Sean Wang authored
Reduce the data latency during hw_scan by the split scan which would switch back to operational channel right after scanning each channel done. Suggested-by: Asda Wen <Asda.Wen@mediatek.com> Suggested-by: Soul Huang <Soul.Huang@mediatek.com> Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Sean Wang authored
Fix the second insert module causing the device hangs after remove module. Fixes: 1c099ab4 ("mt76: mt7921: add MCU support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Sean Wang authored
Fix kernel crash when the firmware is missing or fails to download. [ 9.444758] kernel BUG at drivers/pci/msi.c:375! [ 9.449363] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 9.501033] pstate: a0400009 (NzCv daif +PAN -UAO) [ 9.505814] pc : free_msi_irqs+0x180/0x184 [ 9.509897] lr : free_msi_irqs+0x40/0x184 [ 9.513893] sp : ffffffc015193870 [ 9.517194] x29: ffffffc015193870 x28: 00000000f0e94fa2 [ 9.522492] x27: 0000000000000acd x26: 000000000000009a [ 9.527790] x25: ffffffc0152cee58 x24: ffffffdbb383e0d8 [ 9.533087] x23: ffffffdbb38628d0 x22: 0000000000040200 [ 9.538384] x21: ffffff8cf7de7318 x20: ffffff8cd65a2480 [ 9.543681] x19: ffffff8cf7de7000 x18: 0000000000000000 [ 9.548979] x17: ffffff8cf9ca03b4 x16: ffffffdc13ad9a34 [ 9.554277] x15: 0000000000000000 x14: 0000000000080800 [ 9.559575] x13: ffffff8cd65a2980 x12: 0000000000000000 [ 9.564873] x11: ffffff8cfa45d820 x10: ffffff8cfa45d6d0 [ 9.570171] x9 : 0000000000000040 x8 : ffffff8ccef1b780 [ 9.575469] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000 [ 9.580766] x5 : ffffffdc13824900 x4 : ffffff8ccefe0000 [ 9.586063] x3 : 0000000000000000 x2 : 0000000000000000 [ 9.591362] x1 : 0000000000000125 x0 : ffffff8ccefe0000 [ 9.596660] Call trace: [ 9.599095] free_msi_irqs+0x180/0x184 [ 9.602831] pci_disable_msi+0x100/0x130 [ 9.606740] pci_free_irq_vectors+0x24/0x30 [ 9.610915] mt7921_pci_probe+0xbc/0x250 [mt7921e] [ 9.615693] pci_device_probe+0xd4/0x14c [ 9.619604] really_probe+0x134/0x2ec [ 9.623252] driver_probe_device+0x64/0xfc [ 9.627335] device_driver_attach+0x4c/0x6c [ 9.631506] __driver_attach+0xac/0xc0 [ 9.635243] bus_for_each_dev+0x8c/0xd4 [ 9.639066] driver_attach+0x2c/0x38 [ 9.642628] bus_add_driver+0xfc/0x1d0 [ 9.646365] driver_register+0x64/0xf8 [ 9.650101] __pci_register_driver+0x6c/0x7c [ 9.654360] init_module+0x28/0xfdc [mt7921e] [ 9.658704] do_one_initcall+0x13c/0x2d0 [ 9.662615] do_init_module+0x58/0x1e8 [ 9.666351] load_module+0xd80/0xeb4 [ 9.669912] __arm64_sys_finit_module+0xa8/0xe0 [ 9.674430] el0_svc_common+0xa4/0x16c [ 9.678168] el0_svc_compat_handler+0x2c/0x40 [ 9.682511] el0_svc_compat+0x8/0x10 [ 9.686076] Code: a94257f6 f9400bf7 a8c47bfd d65f03c0 (d4210000) [ 9.692155] ---[ end trace 7621f966afbf0a29 ]--- [ 9.697385] Kernel panic - not syncing: Fatal exception [ 9.702599] SMP: stopping secondary CPUs [ 9.706549] Kernel Offset: 0x1c03600000 from 0xffffffc010000000 [ 9.712456] PHYS_OFFSET: 0xfffffff440000000 [ 9.716625] CPU features: 0x080026,2a80aa18 [ 9.720795] Memory Limit: none Fixes: 5c14a5f9 ("mt76: mt7921: introduce mt7921e support") Reported-by: Claire Chang <tientzu@google.com> Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
- 11 Apr, 2021 31 commits
-
-
Sean Wang authored
dwell time for the scan is not configurable according to the current firmware submitted into linux-firmware.git, so leave the dwell time 0 to indicate the dwell time always determined by the firmware. Fixes: 399090ef ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module") Suggested-by: Soul Huang <Soul.Huang@mediatek.com> Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Sean Wang authored
Fix the Wake-on-WoWLAN failure should rely on ARP Information is being updated in time to the firmware. Fixes: ffa1bf97 ("mt76: mt7921: introduce PM support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce MT_WFDMA_DUMMY_CR definition and remove magic numbers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Reset wifi subsystem when MCU is already running. Fixes firmware download failure after soft reboot on systems where the PCIe reset could not be performed properly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
ieee80211_beacon_get_template() returns NULL when beacon state is disabled. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
ieee80211_beacon_get_template() returns NULL when beacon state is disabled, so beacon_offload cannot be disabled for some devices. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Rework mt7921_mcu_debug_msg_event routing removing unnecessary assignments and relying on wiphy_info Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Make sure the mcu is not in sleep mode before sending mcu messages in mt7921_remove_interface routine. Fixes: 1d8efc74 ("mt76: mt7921: introduce Runtime PM support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Similar to the mt7915 driver, deleting a key with the previous key index deletes the current key. Rework the code to better keep track of multiple keys and check for the key index before deleting the current key Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Shayne Chen authored
Fix incorrect txpower init value for TSSI off chips which causes too small txpower. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Guobin Huang authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Convert mt76 dts bindings from .txt to .yaml Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Convert generic ieee80211 dts bindings from .txt to .yaml Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Avoid including garbage from previous rx data Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Avoid including garbage from previous rx data Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
After chip reset, the DMA scheduler needs to be initialized as well. Since the code is PCI/SoC specific, move it to pci_mac.c, so that it can depend on a function in dma.c Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Cleanup mcu queues in mt7915_mac_reset_work(). Fixes: e637763b ("mt76: move mcu queues to mt76_dev q_mcu array") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
The same as mt7615. Keep BSS_INFO_BASIC enabled throughout interfaces life cycle. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
BSS_INFO_BASIC is never called alone with inactive state, which always follows beacon offload disable, so keep it enabled throughout interfaces life cycle. Inactive state also removes sta record of all connected stations, thurs causes connection lost which defeats the purpose of CSA. Lastly, this is especially an unexpected behavior that keeping mt7622 failing beacon buffer recyled when scanning channels. bss_conf change is updated with active state only, so just overwrite it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
hif interrupt needs to be triggered after MT_MCU_INT_EVENT. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
With this patch, mt7615_mac_reset_work() can recover system back. Fixes: e637763b ("mt76: move mcu queues to mt76_dev q_mcu array") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
DFS knobs should not be visible to non-DFS devices. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Properly configure rcpi based on association process rssi. rcpi is used by rate controller embedded into the fw to initialize amsdu size. Tested-by: Jayden.Kuo <jayden.kuo@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce mt76_sta_cmd_info data structure to contain parameters passed to mt76_sta_cmd_info routine. This is preliminary patch to properly configure rcpi for mt7921 devices. Tested-by: Jayden.Kuo <jayden.kuo@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Get rid of mt7921_mac_wtbl_lmac_addr routine since mt7921 wtbl size is 19 entries Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
When disassociating and clearing the BSSID of a repeater entry used by a client mode interface, the corresponding MAC address entry can get lost too, causing the client interface to not be able to associate anymore. Fix this by also refreshing the MAC address when setting the BSSID Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Deleting a key with the previous key index deletes the current key Rework the code to better keep track of multiple keys and check for the key index before deleting the current key Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Remove mcu definitions already available in mt76_connac_mcu.h Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Colin Ian King authored
Currently in the switch statement case where type is NL80211_IFTYPE_STATION there is a check to see if type is not NL80211_IFTYPE_STATION. This check is always false and is redundant dead code that can be removed. Addresses-Coverity: ("Logically dead code") Fixes: e0f9fdda ("mt76: mt7921: add ieee80211_ops") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Remove leftovers from dbdc configuration since mt7921 does not support it. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce wifi chip reset support for mt7921 device to recover mcu hangs. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-