- 30 Apr, 2016 19 commits
-
-
Oliver Neukum authored
commit 0d5ce778 upstream. A typo of j for i led to a logic bug. To rule out future confusion, the variable names are made meaningful. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Michael Hennerich authored
commit f3df53e4 upstream. Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd3949 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Mateusz Guzik authored
commit 2e83b79b upstream. This plugs 2 trivial leaks in xfs_attr_shortform_list and xfs_attr3_leaf_list_int. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
J. Bruce Fields authored
commit 4aed9c46 upstream. A number of spots in the xdr decoding follow a pattern like n = be32_to_cpup(p++); READ_BUF(n + 4); where n is a u32. The only bounds checking is done in READ_BUF itself, but since it's checking (n + 4), it won't catch cases where n is very large, (u32)(-4) or higher. I'm not sure exactly what the consequences are, but we've seen crashes soon after. Instead, just break these up into two READ_BUF()s. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Michael S. Tsirkin authored
commit 10e7ac22 upstream. Calling return copy_to_user(...) in an ioctl will not do the right thing if there's a pagefault: copy_to_user returns the number of bytes not copied in this case. Fix up watchdog/rc32434_wdt to do return copy_to_user(...)) ? -EFAULT : 0; instead. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Hans de Goede authored
commit 5c915c68 upstream. On my bttv card "Hauppauge WinTV [card=10]" capturing in YV12 fmt at max size results in a solid green rectangle being captured (all colors 0 in YUV). This turns out to be caused by max-width (924) not being a multiple of 16. We've likely never hit this problem before since normally xawtv / tvtime, etc. will prefer packed pixel formats. But when using a video card which is using xf86-video-modesetting + glamor, only planar XVideo fmts are available, and xawtv will chose a matching capture format to avoid needing to do conversion, triggering the solid green window problem. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
Dmitry Tunin authored
commit 81d90442 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3014 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1546694Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Bjorn Helgaas authored
commit b84106b4 upstream. The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by:
Andi Kleen <ak@linux.intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Sudip Mukherjee authored
commit ea32f065 upstream. On error we jumped to the error label and returned the error code but we missed releasing sinfo. Fixes: 5fe74014172d ("mac80211: avoid excessive stack usage in sta_info") Reviewed-by:
Julian Calaby <julian.calaby@gmail.com> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: there's no out_err label but there is another error case that would leak sinfo] Signed-off-by:
-
Arnd Bergmann authored
commit 0ef049dc upstream. When CONFIG_OPTIMIZE_INLINING is set, the sta_info_insert_finish function consumes more stack than normally, exceeding the 1024 byte limit on ARM: net/mac80211/sta_info.c: In function 'sta_info_insert_finish': net/mac80211/sta_info.c:561:1: error: the frame size of 1080 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] It turns out that there are two functions that put a 'struct station_info' on the stack: __sta_info_destroy_part2 and sta_info_insert_finish, and this structure alone requires up to 792 bytes. Hoping that both are called rarely enough, this replaces the on-stack structure with a dynamic allocation, which unfortunately requires some suboptimal error handling for out-of-memory. The __sta_info_destroy_part2 function is actually affected by the stack usage twice because it calls cfg80211_del_sta_sinfo(), which has another instance of struct station_info on its stack. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 98b62183 ("mac80211/cfg80211: add station events") Fixes: 6f7a8d26 ("mac80211: send statistics with delete station event") Signed-off-by:
-
Raghava Aditya Renukunta authored
commit f88fa79a upstream. aac_fib_map_free() calls pci_free_consistent() without checking that dev->hw_fib_va is not NULL and dev->max_fib_size is not zero.If they are indeed NULL/0, this will result in a hang as pci_free_consistent() will attempt to invalidate cache for the entire 64-bit address space (which would take a very long time). Fixed by adding a check to make sure that dev->hw_fib_va and dev->max_fib_size are not NULL and 0 respectively. Fixes: 9ad5204d - "[SCSI]aacraid: incorrect dma mapping mask during blinked recover or user initiated reset" Signed-off-by:
Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dmitry Tunin authored
commit 28c971d8 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e095 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb This device requires ar3k/AthrBT_0x31010100.dfu and ar3k/ramps_0x31010100_40.dfu firmware files that are not in linux-firmware yet. BugLink: https://bugs.launchpad.net/bugs/1542944Signed-off-by:
-
Dmitry Tunin authored
commit 609574eb upstream. T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3395 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1542564Reported-and-tested-by:
Christopher Simerly <kilikopela29@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 3e71da19 upstream. bytesperline should be the bytesperline for the first plane for planar formats, not that of all planes combined. This fixes a crash in xawtv caused by the wrong bpl. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1305389Reported-and-tested-by:
Stas Sergeev <stsp@list.ru> Signed-off-by:
-
Oliver Neukum authored
commit 264904cc upstream. Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.htmlSigned-off-by:
-
Peter Hurley authored
commit 401879c5 upstream. The N_IRDA line discipline may access the previous line discipline's closed and already-fre private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] ================================================================== BUG: KASAN: use-after-free in irtty_open+0x422/0x550 at addr ffff8800331dd068 Read of size 4 by task a.out/13960 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- ... Call Trace: [<ffffffff815fa2ae>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:279 [<ffffffff836938a2>] irtty_open+0x422/0x550 drivers/net/irda/irtty-sir.c:436 [<ffffffff829f1b80>] tty_ldisc_open.isra.2+0x60/0xa0 drivers/tty/tty_ldisc.c:447 [<ffffffff829f21c0>] tty_set_ldisc+0x1a0/0x940 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff829da49e>] tty_ioctl+0xace/0x1fd0 drivers/tty/tty_io.c:2883 [< inline >] vfs_ioctl fs/ioctl.c:43 [<ffffffff816708ac>] do_vfs_ioctl+0x57c/0xe60 fs/ioctl.c:607 [< inline >] SYSC_ioctl fs/ioctl.c:622 [<ffffffff81671204>] SyS_ioctl+0x74/0x80 fs/ioctl.c:613 [<ffffffff852a7876>] entry_SYSCALL_64_fastpath+0x16/0x7a Reported-and-tested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Sebastian Frias authored
commit 0b41ce99 upstream. Some UART HW has a single register combining UART_DLL/UART_DLM (this was probably forgotten in the change that introduced the callbacks, commit b32b19b8) Fixes: b32b19b8 ("[SERIAL] 8250: set divisor register correctly ...") Signed-off-by:
Sebastian Frias <sf84@laposte.net> Reviewed-by:
-
Hans de Goede authored
commit 7445e45d upstream. SPC 880NC PC camera discussions: http://www.pclinuxos.com/forum/index.php/topic,135688.0.htmlReported-by:
Kikim <klucznik0@op.pl> Signed-off-by:
-
Dan Carpenter authored
commit 6f3508f6 upstream. dct_sel_base_off is declared as a u64 but we're only using the lower 32 bits because of a shift wrapping bug. This can possibly truncate the upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS row. Fixes: c8e518d5 ('amd64_edac: Sanitize f10_get_base_addr_offset') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwandaSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
- 01 Apr, 2016 21 commits
-
-
Ben Hutchings authored
-
Ioan-Adrian Ratiu authored
commit e470127e upstream. The critical section protected by usbhid->lock in hid_ctrl() is too big and because of this it causes a recursive deadlock. "Too big" means the case statement and the call to hid_input_report() do not need to be protected by the spinlock (no URB operations are done inside them). The deadlock happens because in certain rare cases drivers try to grab the lock while handling the ctrl irq which grabs the lock before them as described above. For example newer wacom tablets like 056a:033c try to reschedule proximity reads from wacom_intuos_schedule_prox_event() calling hid_hw_request() -> usbhid_request() -> usbhid_submit_report() which tries to grab the usbhid lock already held by hid_ctrl(). There are two ways to get out of this deadlock: 1. Make the drivers work "around" the ctrl critical region, in the wacom case for ex. by delaying the scheduling of the proximity read request itself to a workqueue. 2. Shrink the critical region so the usbhid lock protects only the instructions which modify usbhid state, calling hid_input_report() with the spinlock unlocked, allowing the device driver to grab the lock first, finish and then grab the lock afterwards in hid_ctrl(). This patch implements the 2nd solution. Signed-off-by:
Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> [bwh: Backported to 3.2: adjust context] Cc: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
-
Vasily Kulikov authored
commit 8a5e5e02 upstream. Poison pointer values should be small enough to find a room in non-mmap'able/hardly-mmap'able space. E.g. on x86 "poison pointer space" is located starting from 0x0. Given unprivileged users cannot mmap anything below mmap_min_addr, it should be safe to use poison pointers lower than mmap_min_addr. The current poison pointer values of LIST_POISON{1,2} might be too big for mmap_min_addr values equal or less than 1 MB (common case, e.g. Ubuntu uses only 0x10000). There is little point to use such a big value given the "poison pointer space" below 1 MB is not yet exhausted. Changing it to a smaller value solves the problem for small mmap_min_addr setups. The values are suggested by Solar Designer: http://www.openwall.com/lists/oss-security/2015/05/02/6Signed-off-by:
Vasily Kulikov <segoon@openwall.com> Cc: Solar Designer <solar@openwall.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vladis Dronov authored
commit 8e20cf2b upstream. The aiptek driver crashes in aiptek_probe() when a specially crafted USB device without endpoints is detected. This fix adds a check that the device has proper configuration expected by the driver. Also an error return value is changed to more matching one in one of the error paths. Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Martin Schwidefsky authored
commit 3446c13b upstream. The fork of a process with four page table levels is broken since git commit 6252d702 "[S390] dynamic page tables." All new mm contexts are created with three page table levels and an asce limit of 4TB. If the parent has four levels dup_mmap will add vmas to the new context which are outside of the asce limit. The subsequent call to copy_page_range will walk the three level page table structure of the new process with non-zero pgd and pud indexes. This leads to memory clobbers as the pgd_index *and* the pud_index is added to the mm->pgd pointer without a pgd_deref in between. The init_new_context() function is selecting the number of page table levels for a new context. The function is used by mm_init() which in turn is called by dup_mm() and mm_alloc(). These two are used by fork() and exec(). The init_new_context() function can distinguish the two cases by looking at mm->context.asce_limit, for fork() the mm struct has been copied and the number of page table levels may not change. For exec() the mm_alloc() function set the new mm structure to zero, in this case a three-level page table is created as the temporary stack space is located at STACK_TOP_MAX = 4TB. This fixes CVE-2016-2143. Reported-by:
Marcin Kościelnicki <koriakin@0x04.net> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> [bwh: Backported to 3.2: - 31-bit s390 is still supported so keep the #ifdef CONFIG_64BIT conditions - Split page table locks are not implemented for PMDs so don't call pgtable_pmd_page_{ctor,dtor}() - PMDs are not accounted so don't call mm_inc_nr_pmds() - Adjust context] Signed-off-by:
-
Linus Torvalds authored
commit 256faedc upstream. This reverts commit dbb17a21. It turns out that commit can cause problems for systems with multiple GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid graphics. This got noticed originally in 4.4.4, where this patch had already gotten back-ported, but 4.5-rc7 was verified to have the same problem. Alexander Deucher says: "It looks like you have a muxed system so I suspect what's happening is that one of the display is being reported as connected for both the IGP and the dGPU and then the desktop environment gets confused or there some sort problem in the detect functions since the mux is not switched to the dGPU. I don't see an easy fix unless Dave has any ideas. I'd say just revert for now" Reported-by:
Jörg-Volker Peetz <jvpeetz@web.de> Acked-by:
Alexander Deucher <Alexander.Deucher@amd.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Richard Weinberger authored
commit e4f6daac upstream. ubi_start_leb_change() allocates too few bytes. ubi_more_leb_change_data() will write up to req->upd_bytes + ubi->min_io_size bytes. Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Maciej W. Rozycki authored
commit e723e3f7 upstream. Avoid sending a partially initialised `siginfo_t' structure along SIGFPE signals issued from `do_ov' and `do_trap_or_bp', leading to information leaking from the kernel stack. Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Benjamin Poirier authored
commit 1837b2e2 upstream. The current reserved_tailroom calculation fails to take hlen and tlen into account. skb: [__hlen__|__data____________|__tlen___|__extra__] ^ ^ head skb_end_offset In this representation, hlen + data + tlen is the size passed to alloc_skb. "extra" is the extra space made available in __alloc_skb because of rounding up by kmalloc. We can reorder the representation like so: [__hlen__|__data____________|__extra__|__tlen___] ^ ^ head skb_end_offset The maximum space available for ip headers and payload without fragmentation is min(mtu, data + extra). Therefore, reserved_tailroom = data + extra + tlen - min(mtu, data + extra) = skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen) = skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen) Compare the second line to the current expression: reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset) and we can see that hlen and tlen are not taken into account. The min() in the third line can be expanded into: if mtu < skb_tailroom - tlen: reserved_tailroom = skb_tailroom - mtu else: reserved_tailroom = tlen Depending on hlen, tlen, mtu and the number of multicast address records, the current code may output skbs that have less tailroom than dev->needed_tailroom or it may output more skbs than needed because not all space available is used. Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Or Gerlitz authored
commit 11d8d645 upstream. According to IBTA spec v1.3 section 12.7.19, QPs should use GRH when the path returned by the SA has hop-limit > 0. Currently, we do that only for the > 1 case, fix that. Fixes: 6d969a47 ('IB/sa: Add ib_init_ah_from_path()') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Todd E Brandt authored
commit 92f9e179 upstream. Pause/unpause graph tracing around do_suspend_lowlevel as it has inconsistent call/return info after it jumps to the wakeup vector. The graph trace buffer will otherwise become misaligned and may eventually crash and hang on suspend. To reproduce the issue and test the fix: Run a function_graph trace over suspend/resume and set the graph function to suspend_devices_and_enter. This consistently hangs the system without this fix. Signed-off-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Takashi Iwai authored
commit 197b958c upstream. The OSS sequencer client tries to drain the pending events at releasing. Unfortunately, as spotted by syzkaller fuzzer, this may lead to an unkillable process state when the event has been queued at the far future. Since the process being released can't be signaled any longer, it remains and waits for the echo-back event in that far future. Back to history, the draining feature was implemented at the time we misinterpreted POSIX definition for blocking file operation. Actually, such a behavior is superfluous at release, and we should just release the device as is instead of keeping it up forever. This patch just removes the draining call that may block the release for too long time unexpectedly. BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.comReported-by:
Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.2: snd_seq_oss_drain_write() has an extra log statement to be deleted] Signed-off-by:
-
Yegor Yefremov authored
commit c0992d0f upstream. Add support for Quectel UC20 and blacklist the QMI interface. Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> [johan: amend commit message ] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 8019c0b3 upstream. The DRC Mode like "AIF1DRC1 Mode" and EQ Mode like "AIF1.1 EQ Mode" in wm8994 codec driver are enum ctls, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit d0784829 upstream. "MBC Mode", "VSS Mode", "VSS HPF Mode" and "Enhanced EQ Mode" ctls in wm8958 codec driver are enum, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
-
Vittorio Alfieri authored
commit 3c4c615d upstream. The Parrot NMEA GPS Flight Recorder is a USB composite device consisting of hub, flash storage, and cp210x usb to serial chip. It is an accessory to the mass-produced Parrot AR Drone 2. The device emits standard NMEA messages which make the it compatible with NMEA compatible software. It was tested using gpsd version 3.11-3 as an NMEA interpreter and using the official Parrot Flight Recorder. Signed-off-by:
Vittorio Alfieri <vittorio88@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit eab3c4db upstream. snd-hdsp driver accesses enum item values (int) instead of boolean values (long) wrongly for some ctl elements. This patch fixes them. Signed-off-by:
-
Takashi Iwai authored
commit 537e4813 upstream. snd-hdspm driver accesses enum item values (int) instead of boolean values (long) wrongly for some ctl elements. This patch fixes them. Signed-off-by:
-
Takashi Iwai authored
commit 3a72494a upstream. The timer user status compat ioctl returned the bogus struct used for 64bit architectures instead of the 32bit one. This patch addresses it to return the proper struct. Signed-off-by:
-
Mikulas Patocka authored
commit b6853f78 upstream. The delete opration can allocate additional space on the HPFS filesystem due to btree split. The HPFS driver checks in advance if there is available space, so that it won't corrupt the btree if we run out of space during splitting. If there is not enough available space, the HPFS driver attempted to truncate the file, but this results in a deadlock since the commit 7dd29d8d ("HPFS: Introduce a global mutex and lock it on every callback from VFS"). This patch removes the code that tries to truncate the file and -ENOSPC is returned instead. If the user hits -ENOSPC on delete, he should try to delete other files (that are stored in a leaf btree node), so that the delete operation will make some space for deleting the file stored in non-leaf btree node. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by:
-
Andrea Arcangeli authored
commit ad33bb04 upstream. pmd_trans_unstable()/pmd_none_or_trans_huge_or_clear_bad() were introduced to locklessy (but atomically) detect when a pmd is a regular (stable) pmd or when the pmd is unstable and can infinitely transition from pmd_none() and pmd_trans_huge() from under us, while only holding the mmap_sem for reading (for writing not). While holding the mmap_sem only for reading, MADV_DONTNEED can run from under us and so before we can assume the pmd to be a regular stable pmd we need to compare it against pmd_none() and pmd_trans_huge() in an atomic way, with pmd_trans_unstable(). The old pmd_trans_huge() left a tiny window for a race. Useful applications are unlikely to notice the difference as doing MADV_DONTNEED concurrently with a page fault would lead to undefined behavior. [akpm@linux-foundation.org: tidy up comment grammar/layout] Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
