- 28 Oct, 2010 2 commits
-
-
Eric Dumazet authored
commit ea781f19 (use SLAB_DESTROY_BY_RCU and get rid of call_rcu()) did a mistake in __vmalloc() call in nf_ct_alloc_hashtable(). I forgot to add __GFP_HIGHMEM, so pages were taken from LOWMEM only. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@kernel.org Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
Jesse Gross authored
Commit eab6d18d "vlan: Don't check for vlan group before vlan_tx_tag_present" removed the need for the adapter variable in igb_xmit_frame_ring_adv(). This removes the variable as well to avoid the compiler warning. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 27 Oct, 2010 25 commits
-
-
Breno Leitao authored
(Applied over Eric's "ehea: fix use after free" patch) Currently ehea stats are broken. The bytes counters are got from the hardware, while the packets counters are got from the device driver. Also, the device driver counters are resetted during the the down process, and the hardware aren't, causing some weird numbers. This patch just consolidates the packets and bytes on the device driver. Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Reviewed-by:
-
Jarek Poplawski authored
Fix lockdep warning: [ 52.991402] ====================================================== [ 52.991511] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 52.991569] 2.6.36-04573-g4b60626-dirty #65 [ 52.991622] ------------------------------------------------------ [ 52.991696] ip/4842 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: [ 52.991758] (&bond->lock){++++..}, at: [<efe4d300>] bond_set_multicast_list+0x60/0x2c0 [bonding] [ 52.991966] [ 52.991967] and this task is already holding: [ 52.992008] (&bonding_netdev_addr_lock_key){+.....}, at: [<c04e5530>] dev_mc_sync+0x50/0xa0 [ 52.992008] which would create a new lock dependency: [ 52.992008] (&bonding_netdev_addr_lock_key){+.....} -> (&bond->lock){++++..} [ 52.992008] [ 52.992008] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 52.992008] (&(&mc->mca_lock)->rlock){+.-...} [ 52.992008] ... which became SOFTIRQ-irq-safe at: [ 52.992008] [<c0272beb>] __lock_acquire+0x96b/0x1960 [ 52.992008] [<c027415e>] lock_acquire+0x7e/0xf0 [ 52.992008] [<c05f356d>] _raw_spin_lock_bh+0x3d/0x50 [ 52.992008] [<c0584e40>] mld_ifc_timer_expire+0xf0/0x280 [ 52.992008] [<c024cee6>] run_timer_softirq+0x146/0x310 [ 52.992008] [<c024591d>] __do_softirq+0xad/0x1c0 [ 52.992008] [ 52.992008] to a SOFTIRQ-irq-unsafe lock: [ 52.992008] (&bond->lock){++++..} [ 52.992008] ... which became SOFTIRQ-irq-unsafe at: [ 52.992008] ... [<c0272c3b>] __lock_acquire+0x9bb/0x1960 [ 52.992008] [<c027415e>] lock_acquire+0x7e/0xf0 [ 52.992008] [<c05f36b8>] _raw_write_lock+0x38/0x50 [ 52.992008] [<efe4cbe4>] bond_vlan_rx_register+0x24/0x70 [bonding] [ 52.992008] [<c0598010>] register_vlan_dev+0xc0/0x280 [ 52.992008] [<c0599f3a>] vlan_newlink+0xaa/0xd0 [ 52.992008] [<c04ed4b4>] rtnl_newlink+0x404/0x490 [ 52.992008] [<c04ece35>] rtnetlink_rcv_msg+0x1e5/0x220 [ 52.992008] [<c050424e>] netlink_rcv_skb+0x8e/0xb0 [ 52.992008] [<c04ecbac>] rtnetlink_rcv+0x1c/0x30 [ 52.992008] [<c0503bfb>] netlink_unicast+0x24b/0x290 [ 52.992008] [<c0503e37>] netlink_sendmsg+0x1f7/0x310 [ 52.992008] [<c04cd41c>] sock_sendmsg+0xac/0xe0 [ 52.992008] [<c04ceb80>] sys_sendmsg+0x130/0x230 [ 52.992008] [<c04cf04e>] sys_socketcall+0xde/0x280 [ 52.992008] [<c0202d10>] sysenter_do_call+0x12/0x36 [ 52.992008] [ 52.992008] other info that might help us debug this: ... [ Full info at netdev: Wed, 27 Oct 2010 12:24:30 +0200 Subject: [BUG net-2.6 vlan/bonding] lockdep splats ] Use BH variant of write_lock(&bond->lock) (as elsewhere in bond_main) to prevent this dependency. Fixes commit f35188fa [v2.6.36] Reported-by:Jarek Poplawski <jarkao2@gmail.com> Acked-by:
-
Pavel Emelyanov authored
After making rcu protection for tunnels (ipip, gre, sit and ip6) a bug was introduced into the SIOCCHGTUNNEL code. The tunnel is first unlinked, then addresses change, then it is linked back probably into another bucket. But while changing the parms, the hash table is unlocked to readers and they can lookup the improper tunnel. Respective commits are b7285b79 (ipip: get rid of ipip_lock), 1507850b (gre: get rid of ipgre_lock), 3a43be3c (sit: get rid of ipip6_lock) and 94767632 (ip6tnl: get rid of ip6_tnl_lock). The quick fix is to wait for quiescent state to pass after unlinking, but if it is inappropriate I can invent something better, just let me know. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Acked-by:
-
Amarnath Revanna authored
Signed-off-by:
Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by:
-
Amarnath Revanna authored
Signed-off-by:
-
sjur.brandeland@stericsson.com authored
Signed-off-by:
-
Amarnath Revanna authored
Signed-off-by:
-
Julia Lawall authored
Delete successive assignments to the same location. In the first case, the hscx array has two elements, so change the assignment to initialize the second one. In the second case, the two assignments are simply identical. Furthermore, neither is necessary, because the effect of the assignment is only visible in the next line, in the assignment in the if test. The patch inlines the right hand side value in the latter assignment and pulls that assignment out of the if test. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression i; @@ *i = ...; i = ...; // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Delete successive assignments to the same location. The current definition does not initialize the respRing structure, which has the same type as the cmdRing structure, so initialize that one instead. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression i; @@ *i = ...; i = ...; // </smpl> Signed-off-by:
David Dillow <dave@thedillows.org> Signed-off-by:
-
Julia Lawall authored
The other code around these duplicated assignments initializes the 0 1 2 and 3 elements of an array, so change the initialization of the rx_session_id array to do the same. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression i; @@ *i = ...; i = ...; // </smpl> Signed-off-by:
-
Sony Chacko authored
4095 vlan id is reserved and should not be use. Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
-
Sony Chacko authored
If eswitch is enabled, rcv ring size can be reduce, as physical port is partition-ed. Signed-off-by:
-
amit salecha authored
In failover bonding case, same mac address can be programmed on other slave function. Fw will delete old entry (original func) associated with that mac address. Need to reporgram mac address, if failover again happen to original function. Signed-off-by:
-
Eric Dumazet authored
ehea_start_xmit() dereferences skb after its freeing in ehea_xmit3() to get vlan tags. Move the offending block before the potential ehea_xmit3() call. Signed-off-by:
-
Eric Dumazet authored
Adds __rcu annotations to inetpeer (struct inet_peer)->avl_left (struct inet_peer)->avl_right This is a tedious cleanup, but removes one smp_wmb() from link_to_pool() since we now use more self documenting rcu_assign_pointer(). Note the use of RCU_INIT_POINTER() instead of rcu_assign_pointer() in all cases we dont need a memory barrier. Signed-off-by:
-
Eric Dumazet authored
Adds __rcu annotation to (struct fib_rule)->ctarget Signed-off-by:
-
Eric Dumazet authored
Add __rcu annotations to : (struct ip_tunnel)->prl (struct ip_tunnel_prl_entry)->next (struct xfrm_tunnel)->next struct xfrm_tunnel *tunnel4_handlers struct xfrm_tunnel *tunnel64_handlers And use appropriate rcu primitives to reduce sparse warnings if CONFIG_SPARSE_RCU_POINTER=y Signed-off-by: -
Eric Dumazet authored
Add __rcu annotations to : struct net_protocol *inet_protos struct net_protocol *inet6_protos And use appropriate casts to reduce sparse warnings if CONFIG_SPARSE_RCU_POINTER=y Signed-off-by: -
Eric Dumazet authored
Add __rcu annotations to : (struct dst_entry)->rt_next (struct rt_hash_bucket)->chain And use appropriate rcu primitives to reduce sparse warnings if CONFIG_SPARSE_RCU_POINTER=y Signed-off-by: -
Ron Mercer authored
Signed-off-by:
Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by:
Ron Mercer <ron.mercer@qlogic.com> Signed-off-by:
-
Somnath Kotur authored
When async mcc compls are rcvd on an i/f that is down (and so interrupts are disabled) they just lie unprocessed in the compl queue.The compl queue can eventually get filled up and cause the BE to lock up.The fix is to use be_worker to reap mcc compls when the i/f is down.be_worker is now launched in be_probe() and canceled in be_remove(). Signed-off-by:
Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by:
-
Ursula Braun authored
After running this bonding setup script modprobe bonding miimon=100 mode=0 max_bonds=1 ifconfig bond0 10.1.1.1/16 ifenslave bond0 eth1 ifenslave bond0 eth3 on s390 with qeth-driven slaves, modprobe -r fails with this message unregister_netdevice: waiting for bond0 to become free. Usage count = 1 due to twice detection of duplicate address. Problem is caused by a missing decrease of ifp->refcnt in addrconf_dad_failure. An extra call of in6_ifa_put(ifp) solves it. Problem has been introduced with commit f2344a13. Signed-off-by:Ursula Braun <ursula.braun@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ben Hutchings authored
NETIF_F_HW_CSUM indicates the ability to update an TCP/IP-style 16-bit checksum with the checksum of an arbitrary part of the packet data, whereas the FCoE CRC is something entirely different. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org [2.6.32+] Signed-off-by:
-
Ben Hutchings authored
dev_can_checksum() incorrectly returns true in these cases: 1. The skb has both out-of-band and in-band VLAN tags and the device supports checksum offload for the encapsulated protocol but only with one layer of encapsulation. 2. The skb has a VLAN tag and the device supports generic checksumming but not in conjunction with VLAN encapsulation. Rearrange the VLAN tag checks to avoid these. Signed-off-by:
-
Jarek Poplawski authored
gianfar: Fix crashes on RX path (Was Re: [Bugme-new] [Bug 19692] New: linux-2.6.36-rc5 crash with gianfar ethernet at full line rate traffic) The rx_recycle queue is global per device but can be accesed by many napi handlers at the same time, so it needs full skb_queue primitives (with locking). Otherwise, various crashes caused by broken skbs are possible. This patch resolves, at least partly, bugzilla bug 19692. (Because of some doubts that there could be still something around which is hard to reproduce my proposal is to leave this bug opened for a month.) Fixes commit: 0fd56bb5 ("gianfar: Add support for skb recycling") Reported-by:
emin ak <eminak71@gmail.com> Tested-by:
-
- 26 Oct, 2010 11 commits
-
-
Glenn Wurster authored
There is a bug in the interaction between ipv6_create_tempaddr and addrconf_verify. Because ipv6_create_tempaddr uses the cstamp and tstamp from the public address in creating a private address, if we have not received a router advertisement in a while, tstamp + temp_valid_lft might be < now. If this happens, the new address is created inside ipv6_create_tempaddr, then the loop within addrconf_verify starts again and the address is immediately deleted. We are left with no temporary addresses on the interface, and no more will be created until the public IP address is updated. To avoid this, set the expiry time to be the minimum of the time left on the public address or the config option PLUS the current age of the public interface. Signed-off-by:
Glenn Wurster <gwurster@scs.carleton.ca> Signed-off-by:
-
Glenn Wurster authored
If privacy extentions are enabled, but no current temporary address exists, then create one when we get a router advertisement. Signed-off-by:
-
Eric Dumazet authored
While fixing CONFIG_SPARSE_RCU_POINTER errors, I had to fix accesses to fz->fz_hash for real. - &fz->fz_hash[fn_hash(f->fn_key, fz)] + rcu_dereference(fz->fz_hash) + fn_hash(f->fn_key, fz) Signed-off-by:
-
Eric Dumazet authored
Some panic reports in fib_rules_lookup() show a rule could have a NULL pointer as a next pointer in the rules_list. This can actually happen because of a bug in fib_nl_newrule() : It checks if current rule is the destination of unresolved gotos. (Other rules have gotos to this about to be inserted rule) Problem is it does the resolution of the gotos before the rule is inserted in the rules_list (and has a valid next pointer) Fix this by moving the rules_list insertion before the changes on gotos. A lockless reader can not any more follow a ctarget pointer, unless destination is ready (has a valid next pointer) Reported-by:
Oleg A. Arkhangelsky <sysoleg@yandex.ru> Reported-by:
Joe Buehler <aspam@cox.net> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Rafael J. Wysocki authored
The tg3 driver calls device_set_wakeup_enable() under spin_lock_bh, which causes a problem to happen after the recent core power management changes, because this function can sleep now. Fix this by moving the device_set_wakeup_enable() call out of the spin_lock_bh-protected area. Reported-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
-
Marc Kleine-Budde authored
This patch sets the missing CAN_RTR_FLAG if a standard RTR frame is received. (For extended frames the CAN_RTR_FLAG was already set correctly.) Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marc Kleine-Budde authored
The priv is part of the memory allocated by alloc_candev(). This patch moved the free it after last usage of priv. Signed-off-by:
-
Nicolas Kaiser authored
If we continue on error, we'd likely free the IRQ that we didn't get, right? Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
David S. Miller authored
Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
- 25 Oct, 2010 2 commits
-
-
Randy Dunlap authored
Fix pch_can build when CONFIG_PCI is not enabled. It uses pci interfaces and data structures, so it should depend on PCI. drivers/net/can/pch_can.c:1044: error: implicit declaration of function 'pci_enable_msi' drivers/net/can/pch_can.c:1079: error: implicit declaration of function 'pci_disable_msi' Signed-off-by:
-
Eric Dumazet authored
Add __rcu annotations to : (struct ip_ra_chain)->next struct ip_ra_chain *ip_ra_chain; And use appropriate rcu primitives. Signed-off-by:
-
