Use an IRQF_TRIGGER_ flag in request_irq instead.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Some ASIC3 devices in the wild are connected with the address bus shifted
by one line, so that its 16-bit registers appear 32-bit aligned in host
memory space.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

The Toshiba parts all have a 24 MHz HCLK, but HTC ASIC3 has a 24.576 MHz HCLK
and AMD Imageon w228x's HCLK is 80 MHz. With this patch, the MFD driver
provides the HCLK frequency to tmio_mmc via mfd_cell->driver_data.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

This patch changes the reported error code for the responses
to a command from EINVAL to EFAULT/ENOSYS, as EINVAL is reserved
for non-recoverable host errors, and the responses from
the SD/MMC card may be because of recoverable transmission
errors in the command or in the response. Response codes
in SPI mode are NOT protected by a checksum, so don't trust them.
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Acked-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Added a platform driver which uses the SDHCI core.
Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

The MMC core has now been fixed to not send silly frequencies to the
drivers which means we can remove this workaround.
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Signed-off-by: Pierre Ossman <pierre@ossman.eu>

The code is divided in two parts. There is a virtual 'bus' driver
that handles PCI device and registers three new devices one per card
reader type. The other driver handles SD/MMC part of the reader.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Changes pxamci.c to use the regulator subsystem. Uses the regulator case
CONFIG_REGULATOR is defined and a matching is regulator is provided, or
falls back to pdata->setpower otherwise. A warning is displayed case
both a valid regulator and pdata is set, and the regulator is used.
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Some controllers allow a much lower frequency than 400kHz.
Keep the minimum frequency within sensible limits.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Because of granularity issues, sometimes we told the hardware to change
to the voltage we were already at. Rework the logic so this doesn't
happen.
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

A pointer to mmc_omap_probe which lives in .init.text is passed to the
core via platform_driver_register and so the kernel might oops if probe
is called after the init code is discarded.

As requested by David Brownell platform_driver_probe is used instead of
moving the probe function to .devinit.text.  This saves some memory, but
might have the downside that a device being registered after the call to
mmc_omap_init but before the init sections are discarded will not be
bound anymore to the driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Speedup for slow cards by transfering more data at once.
This patch also reduces the amount of wear-out of the flash
blocks because fewer partial blocks are written.
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

With this patch, mmc_rescan can detect the removal of an mmc card and
the insertion of (possibly another) card in the same run. This means
that a card change can be detected without having to call
mmc_detect_change multiple times.

This change generalises the core such that it can be easily used by
hosts which provide a mechanism to detect only the presence of a card
reader cover, which has to be taken off in order to insert a card. Other
hosts ("card detect" or "MMC_CAP_NEEDS_POLL") each receive an event when
a card is removed and when a card is inserted, so it is sufficient for
them if mmc_rescan handles only one event at a time. "Cover detect"
hosts, however, only receive events about the cover status. This means
that between 2 subsequent events, both a card removal and a card
insertion can occur. In this case, the pre-patch version of mmc_rescan
would only detect the removal of the previous card but not the insertion
of the new card.
Signed-off-by: Jorg Schummer <ext-jorg.2.schummer@nokia.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/configfs:
  configfs: Rework configfs_depend_item() locking and make lockdep happy
  configfs: Silence lockdep on mkdir() and rmdir()

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (30 commits)
  [S390] wire up sys_perf_counter_open
  [S390] wire up sys_rt_tgsigqueueinfo
  [S390] ftrace: add system call tracer support
  [S390] ftrace: add function graph tracer support
  [S390] ftrace: add function trace mcount test support
  [S390] ftrace: add dynamic ftrace support
  [S390] kprobes: use probe_kernel_write
  [S390] maccess: arch specific probe_kernel_write() implementation
  [S390] maccess: add weak attribute to probe_kernel_write
  [S390] profile_tick called twice
  [S390] dasd: forward internal errors to dasd_sleep_on caller
  [S390] dasd: sync after async probe
  [S390] dasd: check_characteristics cleanup
  [S390] dasd: no High Performance FICON in 31-bit mode
  [S390] dcssblk: revert devt conversion
  [S390] qdio: fix access beyond ARRAY_SIZE of irq_ptr->{in,out}put_qs
  [S390] vmalloc: add vmalloc kernel parameter support
  [S390] uaccess: use might_fault() instead of might_sleep()
  [S390] 3270: lock dependency fixes
  [S390] 3270: do not register with tty_register_device
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  add generic lib/checksum.c
  asm-generic: add a generic uaccess.h
  asm-generic: add generic NOMMU versions of some headers
  asm-generic: add generic atomic.h and io.h
  asm-generic: add legacy I/O header files
  asm-generic: add generic versions of common headers
  asm-generic: make bitops.h usable
  asm-generic: make pci.h usable directly
  asm-generic: make get_rtc_time overridable
  asm-generic: rename page.h and uaccess.h
  asm-generic: rename atomic.h to atomic-long.h
  asm-generic: add a generic unistd.h
  asm-generic: add generic ABI headers
  asm-generic: add generic sysv ipc headers
  asm-generic: introduce asm/bitsperlong.h
  asm-generic: rename termios.h, signal.h and mman.h

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (50 commits)
  drm: include kernel list header file in hashtab header
  drm: Export hash table functionality.
  drm: Split out the mm declarations in a separate header. Add atomic operations.
  drm/radeon: add support for RV790.
  drm/radeon: add rv740 drm support.
  drm_calloc_large: check right size, check integer overflow, use GFP_ZERO
  drm: Eliminate magic I2C frobbing when reading EDID
  drm/i915: duplicate desired mode for use by fbcon.
  drm/via: vfree() no need checking before calling it
  drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver
  drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode
  drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo
  drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds
  drm: add separate drm debugging levels
  radeon: remove _DRM_DRIVER from the preadded sarea map
  drm: don't associate _DRM_DRIVER maps with a master
  drm: simplify kcalloc() call to kzalloc().
  intelfb: fix spelling of "CLOCK"
  drm: fix LOCK_TEST_WITH_RETURN macro
  drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Add empty suspend/resume device irq functions
  PM/Hibernate: Move NVS routines into a seperate file (v2).
  PM/Hibernate: Rename disk.c to hibernate.c
  PM: Separate suspend to RAM functionality from core
  Driver Core: Rework platform suspend/resume, print warning
  PM: Remove device_type suspend()/resume()
  PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)
  PM/Suspend: Do not shrink memory before suspend
  PM: Remove bus_type suspend_late()/resume_early() V2
  PM core: rename suspend and resume functions
  PM: Rename device_power_down/up()
  PM: Remove unused asm/suspend.h
  x86: unify power/cpu_(32|64).c
  x86: unify power/cpu_(32|64) copyright notes
  x86: unify power/cpu_(32|64) regarding restoring processor state
  x86: unify power/cpu_(32|64) regarding saving processor state
  x86: unify power/cpu_(32|64) global variables
  x86: unify power/cpu_(32|64) headers
  PM: Warn if interrupts are enabled during suspend-resume of sysdevs
  PM/ACPI/x86: Fix sparse warning in arch/x86/kernel/acpi/sleep.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use more NOFS allocation
  dlm: connect to nodes earlier
  dlm: fix use count with multiple joins
  dlm: Make name input parameter of {,dlm_}new_lockspace() const

Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter: Start documenting HAVE_PERF_COUNTERS requirements
  perf_counter: Add forward/backward attribute ABI compatibility
  perf record: Explicity program a default counter
  perf_counter: Remove PERF_TYPE_RAW special casing
  perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too
  powerpc, perf_counter: Fix performance counter event types
  perf_counter/x86: Add a quirk for Atom processors
  perf_counter tools: Remove one L1-data alias

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits)
  microblaze: Don't use access_ok for unaligned
  microblaze: remove unused flat_stack_align() definition
  microblaze: Fix problem with early_printk in startup
  microblaze_mmu_v2: Makefiles
  microblaze_mmu_v2: Kconfig update
  microblaze_mmu_v2: stat.h MMU update
  microblaze_mmu_v2: Elf update
  microblaze_mmu_v2: Update dma.h for MMU
  microblaze_mmu_v2: Update cacheflush.h
  microblaze_mmu_v2: Update signal returning address
  microblaze_mmu_v2: Traps MMU update
  microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU
  microblaze_mmu_v2: Update linker script for MMU
  microblaze_mmu_v2: Add MMU related exceptions handling
  microblaze_mmu_v2: uaccess MMU update
  microblaze_mmu_v2: Update exception handling - MMU exception
  microblaze_mmu_v2: entry.S, entry.h
  microblaze_mmu_v2: Add CURRENT_TASK for entry.S
  microblaze_mmu_v2: MMU asm offset update
  microblaze_mmu_v2: Update tlb.h and tlbflush.h
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (62 commits)
  Blackfin: fix sparseirq/kstat_irqs fallout
  Blackfin: fix unused warnings after nommu update
  Blackfin: export the last exception cause via debugfs
  Blackfin: fix length checking in kgdb_ebin2mem
  Blackfin: kgdb: fix up error return values
  Blackfin: push access_ok() L1 attribute down
  Blackfin: punt duplicated search_exception_table() prototype
  Blackfin: add missing access_ok() checks to user functions
  Blackfin: convert early_printk EVT init to a loop
  Blackfin: document the lsl variants of the L1 allocator
  Blackfin: rename Blackfin relocs according to the toolchain
  Blackfin: check SIC defines rather than variant names
  Blackfin: add SSYNC to set_dma_sg() for descriptor fetching
  Blackfin: convert SMP to only use generic time framework
  Blackfin: bf548-ezkit/bf537-stamp: add resources for ADXL345/346
  Blackfin: override default uClinux MTD addr/size
  Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT
  Blackfin: fix handling of initial L1 reservation
  Blackfin: merge sram init functions
  Blackfin: drop unused reserve_pda() function
  ...

* 'for-linus' of git://linux-arm.org/linux-2.6:
  kmemleak: Add more info to the MAINTAINERS entry
  kmemleak: Remove the kmemleak.h include in drivers/char/vt.c

git commit 0a0c5168 "PM: Introduce functions for suspending and resuming
device interrupts" introduced some helper functions. However these
functions are only available for architectures which support
GENERIC_HARDIRQS.

Other architectures will see this build error:

drivers/built-in.o: In function `sysdev_suspend':
(.text+0x15138): undefined reference to `check_wakeup_irqs'
drivers/built-in.o: In function `device_power_up':
(.text+0x1cb66): undefined reference to `resume_device_irqs'
drivers/built-in.o: In function `device_power_down':
(.text+0x1cb92): undefined reference to `suspend_device_irqs'

To fix this add some empty inline functions for !GENERIC_HARDIRQS.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The *_nvs_* routines in swsusp.c make use of the io*map()
functions, which are only provided for HAS_IOMEM, thus
breaking compilation if HAS_IOMEM is not set. Fix this
by moving the *_nvs_* routines into hibernate_nvs.c, which
is only compiled if HAS_IOMEM is set.

[rjw: Change the name of the new file to hibernate_nvs.c, add the
 license line to the header comment.]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Change the name of kernel/power/disk.c to kernel/power/hibernate.c
in analogy with the file names introduced by the changes that
separated the suspend to RAM and standby funtionality from the
common PM functions.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>

Move the suspend to RAM and standby code from kernel/power/main.c
to two separate files, kernel/power/suspend.c containing the basic
functions and kernel/power/suspend_test.c containing the automatic
suspend test facility based on the RTC clock alarm.

There are no changes in functionality related to these modifications.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>

This patch reworks the platform driver code for legacy
suspend and resume to avoid installing callbacks in
struct device_driver. A warning is also added telling
users to update the platform driver to use dev_pm_ops.

The functions platform_legacy_suspend()/resume() directly
call suspend and resume callbacks in struct platform_driver
instead of wrapping things in platform_drv_suspend()/resume().
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

This patch removes the legacy callbacks ->suspend() and
->resume() from struct device_type. These callbacks seem
unused, and new code should instead make use of struct
dev_pm_ops.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

A future patch is going to modify the memory shrinking code so that
it will make memory allocations to free memory instead of using an
artificial memory shrinking mechanism for that.  For this purpose it
is convenient to move swsusp_shrink_memory() from
kernel/power/swsusp.c to kernel/power/snapshot.c, because the new
memory-shrinking code is going to use things that are local to
kernel/power/snapshot.c .

[rev. 2: Make some functions static and remove their headers from
 kernel/power/power.h]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>

Remove the shrinking of memory from the suspend-to-RAM code, where
it is not really necessary.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>

Remove the ->suspend_late() and ->resume_early() callbacks
from struct bus_type V2. These callbacks are legacy stuff
at this point and since there seem to be no in-tree users
we may as well remove them. New users should use dev_pm_ops.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

This patch (as1241) renames a bunch of functions in the PM core.
Rather than go through a boring list of name changes, suffice it to
say that in the end we have a bunch of pairs of functions:

	device_resume_noirq	dpm_resume_noirq
	device_resume		dpm_resume
	device_complete		dpm_complete
	device_suspend_noirq	dpm_suspend_noirq
	device_suspend		dpm_suspend
	device_prepare		dpm_prepare

in which device_X does the X operation on a single device and dpm_X
invokes device_X for all devices in the dpm_list.

In addition, the old dpm_power_up and device_resume_noirq have been
combined into a single function (dpm_resume_noirq).

Lastly, dpm_suspend_start and dpm_resume_end are the renamed versions
of the former top-level device_suspend and device_resume routines.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Rename the functions performing "_noirq" dev_pm_ops
operations from device_power_down() and device_power_up()
to device_suspend_noirq() and device_resume_noirq().

The new function names are chosen to show that the functions
are responsible for calling the _noirq() versions to finalize
the suspend/resume operation. The current function names do
not perform power down/up anymore so the names may be misleading.

Global function renames:
- device_power_down() -> device_suspend_noirq()
- device_power_up() -> device_resume_noirq()

Static function renames:
- suspend_device_noirq() -> __device_suspend_noirq()
- resume_device_noirq() -> __device_resume_noirq()
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Len Brown <lenb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

This patch removes unused asm/suspend.h files for
the following architectures:

 alpha, arm, ia64, m68k, mips, s390, um
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

This is the last unification step. Here we do remove one of the files
and rename the left one as cpu.c, as both are now the same.
Also update power/Makefile, telling it to build cpu.o, instead of
cpu_(32|64).o
Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: Lauro Salmito <laurosalmito@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>