- 04 Jan, 2024 39 commits
-
-
Stephen Rothwell authored
After merging the net-next tree, today's linux-next build (x86_64 allmodconfig) failed like this: drivers/net/phy/aquantia/aquantia_firmware.c: In function 'aqr_fw_load_memory': drivers/net/phy/aquantia/aquantia_firmware.c:135:23: error: implicit declaration of function 'crc_ccitt_false'; did you mean 'crc_ccitt_byte'? [-Werror=implicit-function-declaration] 135 | crc = crc_ccitt_false(crc, crc_data, sizeof(crc_data)); | ^~~~~~~~~~~~~~~ | crc_ccitt_byte Caused by commit e93984eb ("net: phy: aquantia: add firmware load support") interacting with commit ("lib: crc_ccitt_false() is identical to crc_itu_t()") from the mm tree. Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20231221130946.7ed9a805@canb.auug.org.auSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
This reverts commit c902ba32. This reverts commit 50648968. This reverts commit 77cef1e0. This reverts commit 8f8d322b. This reverts commit 6ca7b548. This reverts commit db468f92. This reverts commit 5f8c64c2. This reverts commit ebdc193b. The driver needs more work. Signed-off-by:
-
Russell King (Oracle) authored
Move phylink_pcs_neg_mode() from the header file into the .c file since nothing should be using it. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
Luiz Angelo Daros de Luca reports that the MDIO bus code maintains a reference to the DT node, but does not hold a refcount on the node. The simple solution to this is to add the necessary refcounting into the MDIO bus code for all users, ensuring that on registration, the refcount is incremented, and only dropped when the MDIO bus is released. Do this for fwnodes, so we not only fix this for DT, but also other types of firmware nodes as well. Reported-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by:
-
Michael Chan authored
Fix the following compile error: .../bnxt.c: In function 'bnxt_cfg_ntp_filters': .../bnxt.c:14077:37: error: implicit declaration of function 'rps_may_expire_flow' [-Werror=implicit-function-declaration] 14077 | if (rps_may_expire_flow(bp->dev, fltr->base.rxq, | ^~~~~~~~~~~~~~~~~~~ bnxt_cfg_ntp_filters() is only used when CONFIG_RFS_ACCEL is enabled. User configured ntuple filters are directly added and will not go through this function. Wrap the body of bnxt_cfg_ntp_filters() with CONFIG_RFS_ACCEL. Fixes: 59cde76f ("bnxt_en: Refactor filter insertion logic in bnxt_rx_flow_steer().") Reported-by:Arnd Bergmann <arnd@kernel.org> Link: https://lore.kernel.org/netdev/20240103102332.3642417-1-arnd@kernel.org/Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
David S. Miller authored
Jiawen Wu says: ==================== Implement more ethtool_ops for Wangxun Provide ethtool functions to operate pause param, ring param, coalesce channel number and msglevel, for driver txgbe/ngbe. v6 -> v7: - Rebase on net-next. v5 -> v6: - Minor fixes address on Jakub Kicinski's comments. v4 -> v5: - Fix build error reported by kernel test robot. v3 -> v4: - Repartition the patches of phylink. - Handle failure to allocate memory while changing ring parameters. - Minor fixes about formatting. v2 -> v3: - Address comments: https://lore.kernel.org/all/ZW2loxTO6oKNYLew@shell.armlinux.org.uk/ v1 -> v2: - Add phylink support for ngbe. - Fix issue on interrupts when queue number is changed. - Add more marco defines. - Fix return codes. ==================== Signed-off-by:
-
Jiawen Wu authored
Add support to get and set msglevel for driver txgbe and ngbe. Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by:
-
Jiawen Wu authored
Add support to get RX/TX queue number with ethtool -l, and set RX/TX queue number with ethtool -L. Since interrupts need to be rescheduled, adjust the allocation of msix enties. Signed-off-by:
-
Jiawen Wu authored
Support to show RX/TX coalesce with ethtool -c and set RX/TX coalesce with ethtool -C. Signed-off-by:
-
Jiawen Wu authored
Support to query RX/TX depth with ethtool -g, and change RX/TX depth with ethtool -G. Signed-off-by:
-
Jiawen Wu authored
Add support to set pause params with ethtool -A and get pause params with ethtool -a, for ethernet driver txgbe and ngbe. Signed-off-by:
-
Jiawen Wu authored
Implement phylink in ngbe driver, to handle phy uniformly for Wangxun ethernet devices. Signed-off-by:
-
Jiawen Wu authored
Convert txgbe to use phylink and phylink_config added in libwx. Signed-off-by:
-
Jiawen Wu authored
For the following implementation, add struct phylink and phylink_config to wx structure. Add the helper function for converting phylink to wx, implement ethtool ksetting and nway reset in libwx. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller authored
t-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-02 (ice) This series contains updates to ice driver only. Karol adds support for capable devices to receive timestamp via interrupt rather than polling to allow for less delay. Andrii adds support switchdev hardware packet mirroring. Jake reworks VF rebuild to avoid destroying objects that do not need to be. Jan S removes reporting of rx_len_errors as they are incorrectly reported by hardware. Jan G adds const modifier to some uses that are applicable. Kunwu Chan adds some checks for failed memory allocations. ==================== Signed-off-by: -
Eric Dumazet authored
Busy polling while holding the socket lock makes litle sense, because incoming packets wont reach our receive queue. Fixes: 8465a5fc ("sctp: add support for busy polling to sctp protocol") Reported-by:
Jacob Moroni <jmoroni@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Mina Almasry authored
Minor fix for kcm: code wanting to access the fields inside an skb frag should use the skb_frag_*() helpers, instead of accessing the fields directly. Signed-off-by:
Mina Almasry <almasrymina@google.com> Link: https://lore.kernel.org/r/20240102205959.794513-1-almasrymina@google.comSigned-off-by:
-
Mina Almasry authored
Minor fix for virtio: code wanting to access the fields inside an skb frag should use the skb_frag_*() helpers, instead of accessing the fields directly. This allows for extensions where the underlying memory is not a page. Acked-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Pedro Tammela authored
Implement conditional netlink notifications for Qdiscs and classes, which were missing in the initial patches that targeted tc filters and actions. Notifications will only be built after passing a check for 'rtnl_notify_needed()'. For both Qdiscs and classes 'get' operations now call a dedicated notification function as it was not possible to distinguish between 'create' and 'get' before. This distinction is necessary because 'get' always send a notification. Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20231229132642.1489088-2-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
Bound actions always return '0' and as of today we rely on '0' being returned in order to properly skip bound actions in tcf_idr_insert_many. In order to further improve maintainability, introduce the ACT_P_BOUND return code. Actions are updated to return 'ACT_P_BOUND' instead of plain '0'. tcf_idr_insert_many is then updated to check for 'ACT_P_BOUND'. Signed-off-by:
-
Eric Dumazet authored
xdp_prog is used in receive path, both from XDP enabled drivers and from netif_elide_gro(). This patch also removes two 4-bytes holes. Fixes: 43a71cd6 ("net-device: reorganize net_device fast path variables") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-02 (ixgbe, i40e) This series contains updates to ixgbe and i40e drivers. Ovidiu Panait adds reporting of VF link state to ixgbe. Jedrzej removes uses of IXGBE_ERR* codes to instead use standard error codes. Andrii modifies behavior of VF disable to properly shut down queues on i40e. Simon Horman removes, undesired, use of comma operator for i40e. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: Avoid unnecessary use of comma operator i40e: Fix VF disable behavior to block all traffic ixgbe: Refactor returning internal error codes ixgbe: Refactor overtemp event handling ixgbe: report link state for VF devices ==================== Link: https://lore.kernel.org/r/20240102222429.699129-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
David Arinzon says: ==================== ENA driver XDP changes This patchset contains multiple XDP-related changes in the ENA driver, including moving the XDP code to dedicated files. ==================== Link: https://lore.kernel.org/r/20240101190855.18739-1-darinzon@amazon.comSigned-off-by:
-
David Arinzon authored
Queue stats using ifconfig and ip are retrieved via ena_get_stats64(). This function currently does not take the xdp sent or dropped packets stats into account. This commit adds the following xdp stats to ena_get_stats64(): tx bytes sent tx packets sent rx dropped packets Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20240101190855.18739-12-darinzon@amazon.comSigned-off-by:
-
David Arinzon authored
Also shorten comment related to it. Signed-off-by:
-
David Arinzon authored
The RX queue info contains information about the RX queue which might be relevant to the kernel. To avoid configuring this queue for different scenarios, this patch moves the RX queue configuration to ena_up()/ena_down() function and makes it configured every interface state toggle. Signed-off-by:
Shay Agroskin <shayagr@amazon.com> Signed-off-by:
-
David Arinzon authored
Used for better readability and debugging of XDP flow. Signed-off-by:
-
David Arinzon authored
This patch focuses on changes to the XDP part of the napi polling routine. 1. Update the `napi_comp` stat only when napi is actually complete. 2. Simplify the code by using a function pointer to the right napi routine (XDP vs non-XDP path) 3. Remove unnecessary local variables. 4. Adjust a debug print to show the processed XDP frame index rather than the pointer. Signed-off-by:
-
David Arinzon authored
This check is already done in ena_clean_rx_irq() which indirectly calls it. This function is called in napi context and the driver doesn't allow to change the XDP program without performing destruction and reinitialization of napi context (part of ena_down/ena_up sequence). Signed-off-by:
-
David Arinzon authored
When an XDP program is loaded the existing channels in the driver split into two halves: - The first half of the channels contain RX and TX rings, these queues are used for receiving traffic and sending packets originating from kernel. - The second half of the channels contain only a TX ring. These queues are used for sending packets that were redirected using XDP_TX or XDP_REDIRECT. Referring to the queues in the second half of the channels as "xdp_ring" can be confusing and may give the impression that ENA has the capability to generate an additional special queue. This patch ensures that the xdp_ring field is exclusively used to describe the XDP TX queue that a specific RX queue needs to utilize when forwarding packets with XDP TX and XDP REDIRECT, preserving the integrity of the xdp_ring field in ena_ring. Signed-off-by:
-
David Arinzon authored
To avoid de-referencing skb or xdp_frame when we poll for TX completion (where they might not be in the cache), save the total TX packet size in the ena_tx_buffer object representing the packet. Also the 'print_once' field's type was changed from u32 to u8 to allow adding the 'total_tx_size' without changing the total size of the struct. Signed-off-by:
-
David Arinzon authored
The skb and xdpf pointers cannot be set together in the driver (each TX descriptor can send either an SKB or an XDP frame), and so it makes more sense to put them both in a union. This decreases the overall size of the ena_tx_buffer struct which improves cache locality. Signed-off-by:
-
David Arinzon authored
This change will enable the ability to use ena_xmit_common() in functions that don't have a net_device pointer. While it can be retrieved by dereferencing ena_adapter (adapter->netdev), there's no reason to do it in fast path code where this pointer is only needed for debug prints. Signed-off-by:
-
David Arinzon authored
XDP system has a very large footprint in the driver's overall code. makes the whole driver's code much harder to read. Moving XDP code to dedicated files. This patch doesn't make any changes to the code itself and only cut-pastes the code into ena_xdp.c and ena_xdp.h files so the change is purely cosmetic. Signed-off-by:
-
Suman Ghosh authored
As of today, the last MCAM entry was not getting allocated because of a <= check with the max_bmap count. This patch modifies that and if the requested entry is greater than the available entries then set it to the max value. Signed-off-by:
Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20240101145042.419697-1-sumang@marvell.comSigned-off-by:
-
Yujie Liu authored
The patch set [1] added a general lib.sh in net selftests, and converted several test scripts to source the lib.sh. unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2]) have a /bin/sh shebang which may point to various shells in different distributions, but "source" is only available in some of them. For example, "source" is a built-it function in bash, but it cannot be used in dash. Refer to other scripts that were converted together, simply change the shebang to bash to fix the following issues when the default /bin/sh points to other shells. not ok 51 selftests: net: unicast_extensions.sh # exit=1 v1 -> v2: - Fix pmtu.sh which has the same issue as unicast_extensions.sh, suggested by Hangbin - Change the style of the "source" line to be consistent with other tests, suggested by Hangbin Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1] Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2] Reported-by:kernel test robot <oliver.sang@intel.com> Fixes: 378f082e ("selftests/net: convert pmtu.sh to run it in unique namespace") Fixes: 0f4765d0 ("selftests/net: convert unicast_extensions.sh to run it in unique namespace") Signed-off-by:
Yujie Liu <yujie.liu@intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.comSigned-off-by:
-
Zhengchao Shao authored
When fib_default_rule_add is invoked, the value of the input parameter 'flags' is always 0. Rules uses kzalloc to allocate memory, so 'flags' has been initialized to 0. Therefore, remove the input parameter 'flags' in fib_default_rule_add. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240102071519.3781384-1-shaozhengchao@huawei.comSigned-off-by:
-
Marcin Wojtas authored
Update the port's device structure also with its fwnode pointer with a recommended device_set_node() helper routine. Signed-off-by:
Marcin Wojtas <marcin.s.wojtas@gmail.com> Reviewed-by:
-
Ilpo Järvinen authored
Instead of open coding, use IS_ALIGNED() and ALIGN_DOWN() when dealing with alignment. Replace also literals with SZ_4K. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Acked-by:
Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20231229145232.6163-1-ilpo.jarvinen@linux.intel.comSigned-off-by:
-
- 03 Jan, 2024 1 commit
-
-
Lin Ma authored
In function `tc_dump_tfilter`, the attributes array is parsed via tcf_tfilter_dump_policy which only describes TCA_DUMP_FLAGS. However, the NLA TCA_CHAIN is also accessed with `nla_get_u32`. The access to TCA_CHAIN is introduced in commit 5bc17018 ("net: sched: introduce multichain support for filters") and no nla_policy is provided for parsing at that point. Later on, tcf_tfilter_dump_policy is introduced in commit f8ab1807 ("net: sched: introduce terse dump flag") while still ignoring the fact that TCA_CHAIN needs a check. This patch does that by complementing the policy to allow the access discussed here can be safe as other cases just choose rtm_tca_policy as the parsing policy. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Acked-by:
-
