Per IBA SPEC, FLUSH will ack in rdma read response with 0 length.

Use IB_WC_FLUSH (aka IB_UVERBS_WC_FLUSH) code to tell userspace a FLUSH
completion.

Link: https://lore.kernel.org/r/20221206130201.30986-9-lizhijian@fujitsu.comReviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Only the requested placement types that also registered in the destination
memory region are acceptable.
Otherwise, responder will also reply NAK "Remote Access Error" if it
found a placement type violation.

We will persist data via arch_wb_cache_pmem(), which could be
architecture specific.

This commit also adds 2 helpers to update qp.resp from the incoming packet.

Link: https://lore.kernel.org/r/20221206130201.30986-8-lizhijian@fujitsu.comReviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Implement FLUSH request operation in the requester.

Link: https://lore.kernel.org/r/20221206130201.30986-7-lizhijian@fujitsu.comReviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Extend rxe opcode tables, headers, helper and constants to support
flush operations.

Refer to the IBA A19.4.1 for more FETH definition details

Link: https://lore.kernel.org/r/20221206130201.30986-6-lizhijian@fujitsu.comReviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Memory region could  support at most 2 flush access flags:
IB_ACCESS_FLUSH_PERSISTENT and IB_ACCESS_FLUSH_GLOBAL

But we only allow user to register persistent flush flags to the pmem MR
where it has the ability of persisting data across power cycles.

So registering a persistent access flag to a non-pmem MR will be rejected.

Link: https://lore.kernel.org/r/20221206130201.30986-5-lizhijian@fujitsu.com
CC: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

This commit extends the rxe user ABI to support the flush
operation defined in IBA A19.4.1. These changes are
backward compatible with the existing rxe user ABI.

The user API request a flush by filling this structure.

Link: https://lore.kernel.org/r/20221206130201.30986-4-lizhijian@fujitsu.comReviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

This commit extends the RDMA kernel verbs ABI to support the flush
operation defined in IBA A19.4.1. These changes are
backward compatible with the existing RDMA kernel verbs ABI.

It makes device/HCA support new FLUSH attributes/capabilities, and it
also makes memory region support new FLUSH access flags.

Users can use ibv_reg_mr(3) to register flush access flags. Only the
access flags also supported by device's capabilities can be registered
successfully.

Once registered successfully, it means the MR is flushable. Similarly,
A flushable MR should also have one or both of GLOBAL_VISIBILITY and
PERSISTENT attributes/capabilities like device/HCA.

Link: https://lore.kernel.org/r/20221206130201.30986-3-lizhijian@fujitsu.comReviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

This commit extends the RDMA user ABI to support the flush
operation defined in IBA A19.4.1. These changes are
backward compatible with the existing RDMA user ABI.

Link: https://lore.kernel.org/r/20221206130201.30986-2-lizhijian@fujitsu.comReviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The code in rxe_resp.c at check_length() is incorrect as it compares
pkt->opcode an 8 bit value against various mask bits which are all higher
than 256 so nothing is ever reported.

This patch rewrites this to compare against pkt->mask which is
correct. However this now exposes another error. For UD send packets the
value of the pmtu cannot be determined from qp->mtu.  All that is required
here is to later check if the payload fits into the posted receive buffer
in that case.

Fixes: 837a5584 ("RDMA/rxe: Implement packet length validation on responder")
Link: https://lore.kernel.org/r/20221208210945.28607-1-rpearsonhpe@gmail.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The commit 686d3484 ("RDMA/rxe: Remove unnecessary mr testing") causes
a kernel crash. If responder get a zero-byte RDMA Read request,
qp->resp.mr is not set in check_rkey() (see IBA C9-88). The mr is NULL in
this case, and a NULL pointer dereference occurs as shown below.

 BUG: kernel NULL pointer dereference, address: 0000000000000010
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD 0 P4D 0
 Oops: 0002 [#1] PREEMPT SMP PTI
 CPU: 2 PID: 3622 Comm: python3 Kdump: loaded Not tainted 6.1.0-rc3+ #34
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
 RIP: 0010:__rxe_put+0xc/0x60 [rdma_rxe]
 Code: cc cc cc 31 f6 e8 64 36 1b d3 41 b8 01 00 00 00 44 89 c0 c3 cc cc cc cc 41 89 c0 eb c1 90 0f 1f 44 00 00 41 54 b8 ff ff ff ff <f0> 0f c1 47 10 83 f8 01 74 11 45 31 e4 85 c0 7e 20 44 89 e0 41 5c
 RSP: 0018:ffffb27bc012ce78 EFLAGS: 00010246
 RAX: 00000000ffffffff RBX: ffff9790857b0580 RCX: 0000000000000000
 RDX: ffff979080fe145a RSI: 000055560e3e0000 RDI: 0000000000000000
 RBP: ffff97909c7dd800 R08: 0000000000000001 R09: e7ce43d97f7bed0f
 R10: ffff97908b29c300 R11: 0000000000000000 R12: 0000000000000000
 R13: 0000000000000000 R14: ffff97908b29c300 R15: 0000000000000000
 FS:  00007f276f7bd740(0000) GS:ffff9792b5c80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000010 CR3: 0000000114230002 CR4: 0000000000060ee0
 Call Trace:
  <IRQ>
  read_reply+0xda/0x310 [rdma_rxe]
  rxe_responder+0x82d/0xe50 [rdma_rxe]
  do_task+0x84/0x170 [rdma_rxe]
  tasklet_action_common.constprop.0+0xa7/0x120
  __do_softirq+0xcb/0x2ac
  do_softirq+0x63/0x90
  </IRQ>

Support a NULL mr during read_reply()

Fixes: 686d3484 ("RDMA/rxe: Remove unnecessary mr testing")
Fixes: b5f9a01f ("RDMA/rxe: Fix mr leak in RESPST_ERR_RNR")
Link: https://lore.kernel.org/r/20221209045926.531689-1-matsuda-daisuke@fujitsu.com
Link: https://lore.kernel.org/r/20221202145713.13152-1-lizhijian@fujitsu.comSigned-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB_FLOW_SPEC_IB is not used in mlx5 and can be deleted.
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20221208101954.687960-1-yanjun.zhu@intel.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

XRC caps has been set by default. But in fact, XRC is not supported in
HIP08.

Fixes: 32548870 ("RDMA/hns: Add support for XRC on HIP09")
Link: https://lore.kernel.org/r/20221126102911.2921820-7-xuhaoyue1@hisilicon.comSigned-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The error code is fixed to EIO when CMD fails to excute. This patch
converts the error status reported by firmware to linux errno.

Fixes: a04ff739 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/20221126102911.2921820-6-xuhaoyue1@hisilicon.comSigned-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Add verification to make sure the roce page size cap is supported by the
system page size.

Fixes: ba6bb7e9 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/20221126102911.2921820-5-xuhaoyue1@hisilicon.comSigned-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Now, The address of the first two pages in the MR will be searched, which
use to speed up the lookup of the pbl table for hardware.  An exception
will occur when there is only one page in this MR.  This patch fix the
number of page to search.

Fixes: 9b2cf76c ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/20221126102911.2921820-4-xuhaoyue1@hisilicon.comSigned-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The queried AH attr is invalid. This patch fix it.

This problem is found by rdma-core test test_mr_rereg_pd

ERROR: test_mr_rereg_pd (tests.test_mr.MRTest)
Test that cover rereg MR's PD with this flow:
----------------------------------------------------------------------
Traceback (most recent call last):
  File "./tests/test_mr.py", line 157, in test_mr_rereg_pd
    self.restate_qps()
  File "./tests/test_mr.py", line 113, in restate_qps
    self.server.qp.to_rts(self.server_qp_attr)
  File "qp.pyx", line 1137, in pyverbs.qp.QP.to_rts
  File "qp.pyx", line 1123, in pyverbs.qp.QP.to_rtr
pyverbs.pyverbs_error.PyverbsRDMAError: Failed to modify QP state to RTR.
Errno: 22, Invalid argument

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/20221126102911.2921820-3-xuhaoyue1@hisilicon.comSigned-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

After the hns roce driver is loaded, if you modify the mac address of the
network port, the following error will appear:

   __ib_cache_gid_add: unable to add gid fe80:0000:0000:0000:4600:4dff:fe22:abb5 error=-28
    hns3 0000:7d:00.0 hns_0: attr path_mtu(1) invalid while modify qp

The reason for the error is that the gid being occupied will cause the
failure to modify the gid. The gid is occupied by the loopback QP used by
free mr. When the mac address is modified, the gid will change. If there
is a busy QP at this time, the gid will not be released and the
modification will fail. The QP of free mr is created using the ib
interface. The ib interface will add a reference count to the gid,
resulting in this error scenario.

Considering that free mr is solving a bug in HIP08, not an actual
business, it is not necessary to use ib interfaces.

Fixes: 70f92521 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Link: https://lore.kernel.org/r/20221126102911.2921820-2-xuhaoyue1@hisilicon.comSigned-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The ack timeout retransmission time is affected by the following two
factors: one is packet life time, another is the HCA processing time.

Now the default packet lifetime(CMA_IBOE_PACKET_LIFETIME) is 18.

That means the minimum ack timeout is 2
seconds (2^(18+1)*4us=2.097seconds).  The packet lifetime means the
maximum transmission time of packets on the network, 2 seconds is too
long.

Assume the network is a clos topology with three layers, every packet will
pass through five hops of switches. Assume the buffer of every switch is
128MB and the port transmission rate is 25 Gbit/s, the maximum
transmission time of the packet is 200ms(128MB*5/25Gbit/s).  Add double
redundancy, it is less than 500ms.

So change the CMA_IBOE_PACKET_LIFETIME to 16, the maximum transmission
time of the packet will be about 500+ms, it is long enough.

Link: https://lore.kernel.org/r/20221125010026.755-1-lengchao@huawei.comSigned-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212071632188074249@zte.com.cnSigned-off-by: Leon Romanovsky <leon@kernel.org>

This reverts commit f35b5d7d.

It has been reported to cause huge performance regressions on some loads
(will-it-scale.per_process_ops, but also building the kernel with
clang).

The commit did speed up gcc builds by a small amount, so it's not an
unambiguous regression, but until the big regressions are understood,
let's revert it.
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210181535.7144dd15-yujie.liu@intel.comReported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/Y1DNQaoPWxE%2BrGce@dev-arch.thelio-3990X/
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently tpm transactions are executed unconditionally in
tpm_pm_suspend() function, which may lead to races with other tpm
accessors in the system.

Specifically, the hw_random tpm driver makes use of tpm_get_random(),
and this function is called in a loop from a kthread, which means it's
not frozen alongside userspace, and so can race with the work done
during system suspend:

  tpm tpm0: tpm_transmit: tpm_recv: error -52
  tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics
  CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
  Call Trace:
   tpm_tis_status.cold+0x19/0x20
   tpm_transmit+0x13b/0x390
   tpm_transmit_cmd+0x20/0x80
   tpm1_pm_suspend+0xa6/0x110
   tpm_pm_suspend+0x53/0x80
   __pnp_bus_suspend+0x35/0xe0
   __device_suspend+0x10f/0x350

Fix this by calling tpm_try_get_ops(), which itself is a wrapper around
tpm_chip_start(), but takes the appropriate mutex.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/
Cc: stable@vger.kernel.org
Fixes: e891db1a ("tpm: turn on TPM on suspend for TPM 1.x")
[Jason: reworked commit message, added metadata]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fix from Borislav Petkov:

 - Fix a use-after-free case where the perf pending task callback would
   see an already freed event

* tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_pending_task() UaF

Pull timer fix from Borislav Petkov:

 - Revert a fix to RISC-V timers supposed to address an uncertainty
   whether clock events are received during S3 or not which locks up
   other RISC-V platforms. The issue will be fixed differently later.

* tag 'timers_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"

Pull powerpc fixes from Michael Ellerman:

 - Fix oops in 32-bit BPF tail call tests

 - Add missing declaration for machine_check_early_boot()

Thanks to Christophe Leroy and Naveen N. Rao.

* tag 'powerpc-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Add missing declaration for machine_check_early_boot()
  powerpc/bpf/32: Fix Oops on tail call tests

Pull input fix from Dmitry Torokhov:

 - a fix for Raydium touchscreen driver to stop leaking memory when
   sending commands to the chip

* tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()

Goto label 'free' where it will kfree the 'in' is not needed though
it's safe to kfree NULL. Return err code directly to simplify the code.

1973 free:
1974         kfree(in);
1975         return err;
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20221203033714.25870-1-lizhijian@fujitsu.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto. Also investigate each case separately as Andy suggessted.

Fixes: e711f968 ("IB/srp: replace custom implementation of hex2bin()")
Fixes: 2a174df0 ("IB/srp: Use kstrtoull() instead of simple_strtoull()")
Fixes: 19f31343 ("IB/srp: Add RDMA/CM support")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-2-git-send-email-wangyufen@huawei.comReviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto.

Fixes: 97167e81 ("staging/rdma/hfi1: Tune for unknown channel if configuration file is absent")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-1-git-send-email-wangyufen@huawei.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Disable all of drivers/infiniband/hw/ and rdmavt for UML builds until
someone needs it and provides patches to support it.

This prevents build errors in hw/qib/qib_wc_x86_64.c.

Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: linux-rdma@vger.kernel.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Link: https://lore.kernel.org/r/20221202211940.29111-1-rdunlap@infradead.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Pull i2c fixes from Wolfram Sang:
 "A power state fix in the core for ACPI devices, a regression fix
  regarding bus recovery for the cadence driver, a DMA handling fix for
  the imx driver, and two error path fixes (npcm7xx and qcom-geni)"

* tag 'i2c-for-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set
  i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer
  i2c: cadence: Fix regression with bus recovery
  i2c: Restore initial power state if probe fails
  i2c: npcm7xx: Fix error handling in npcm_i2c_init()

Pull dax fixes from Dan Williams:
 "A few bug fixes around the handling of "Soft Reserved" memory and
  memory tiering information.

  Linux is starting to enounter more real world systems that deploy an
  ACPI HMAT to describe different performance classes of memory, as well
  the "special purpose" (Linux "Soft Reserved") designation from EFI.

  These fixes result from that testing.

  It has all appeared in -next for a while with no known issues.

   - Fix duplicate overlapping device-dax instances for HMAT described
     "Soft Reserved" Memory

   - Fix missing node targets in the sysfs representation of memory
     tiers

   - Remove a confusing variable initialization"

* tag 'dax-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: Fix duplicate 'hmem' device registration
  ACPI: HMAT: Fix initiator registration for single-initiator systems
  ACPI: HMAT: remove unnecessary variable initialization

Pull block fixes from Jens Axboe:
 "Just a small NVMe merge for this week, fixing protection of the name
  space list, and a missing clear of a reserved field when unused"

* tag 'block-6.1-2022-12-02' of git://git.kernel.dk/linux:
  nvme: fix SRCU protection of nvme_ns_head list
  nvme-pci: clear the prp2 field when not used

Pull pin control fixes from Linus Walleij:
 "Three driver fixes. The Intel fix looks like the most important.

   - Fix a potential divide by zero in pinctrl-singe (OMAP and
     HiSilicon)

   - Disable IRQs on startup in the Mediatek driver. This is a classic,
     we should be looking out for this more.

   - Save and restore pins in 'direct IRQ' mode in the Intel driver,
     this works around firmware bugs"

* tag 'pinctrl-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: intel: Save and restore pins in "direct IRQ" mode
  pinctrl: meditatek: Startup with the IRQs disabled
  pinctrl: single: Fix potential division by zero

Pull RISC-V fixes from Palmer Dabbelt:

 - build fix for the NR_CPUS Kconfig SBI version dependency

 - fixes to early memory initialization, to fix page permissions in EFI
   and post-initmem-free

 - build fix for the VDSO, to avoid trying to profile the VDSO functions

 - fixes for kexec crash handling, to fix multi-core and interrupt
   related initialization inside the crash kernel

 - fix for a race condition when handling multiple concurrect kernel
   stack overflows

* tag 'riscv-for-linus-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: kexec: Fixup crash_smp_send_stop without multi cores
  riscv: kexec: Fixup irq controller broken in kexec crash path
  riscv: mm: Proper page permissions after initmem free
  riscv: vdso: fix section overlapping under some conditions
  riscv: fix race when vmap stack overflow
  riscv: Sync efi page table's kernel mappings before switching
  riscv: Fix NR_CPUS range conditions

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix ambiguous TRIM and DISCARD args
   - Fix removal of debugfs file for mmc_test

  MMC host:
   - mtk-sd: Add missing clk_disable_unprepare() in an error path
   - sdhci: Fix I/O voltage switch delay for UHS-I SD cards
   - sdhci-esdhc-imx: Fix CQHCI exit halt state check
   - sdhci-sprd: Fix voltage switch"

* tag 'mmc-v6.1-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix no reset data and command after voltage switch
  mmc: sdhci: Fix voltage switch delay
  mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()
  mmc: mmc_test: Fix removal of debugfs file
  mmc: sdhci-esdhc-imx: correct CQHCI exit halt state check
  mmc: core: Fix ambiguous TRIM and DISCARD arg

Pull iommu fixes from Joerg Roedel:
 "Intel VT-d fixes:

   - IO/TLB flush fix

   - Various pci_dev refcount fixes"

* tag 'iommu-fixes-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init()
  iommu/vt-d: Fix PCI device refcount leak in has_external_pci()
  iommu/vt-d: Fix PCI device refcount leak in prq_event_thread()
  iommu/vt-d: Add a fix for devices need extra dtlb flush

The "force" argument to write_spec_ctrl_current() is currently ambiguous
as it does not guarantee the MSR write. This is due to the optimization
that writes to the MSR happen only when the new value differs from the
cached value.

This is fine in most cases, but breaks for S3 resume when the cached MSR
value gets out of sync with the hardware MSR value due to S3 resetting
it.

When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write
is skipped. Which results in SPEC_CTRL mitigations not getting restored.

Move the MSR write from write_spec_ctrl_current() to a new function that
unconditionally writes to the MSR. Update the callers accordingly and
rename functions.

  [ bp: Rework a bit. ]

Fixes: caa0ff24 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is a kmemleak when test the raydium_i2c_ts with bpf mock device:

  unreferenced object 0xffff88812d3675a0 (size 8):
    comm "python3", pid 349, jiffies 4294741067 (age 95.695s)
    hex dump (first 8 bytes):
      11 0e 10 c0 01 00 04 00                          ........
    backtrace:
      [<0000000068427125>] __kmalloc+0x46/0x1b0
      [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts]
      [<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts]
      [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts]
      [<00000000a310de16>] i2c_device_probe+0x651/0x680
      [<00000000f5a96bf3>] really_probe+0x17c/0x3f0
      [<00000000096ba499>] __driver_probe_device+0xe3/0x170
      [<00000000c5acb4d9>] driver_probe_device+0x49/0x120
      [<00000000264fe082>] __device_attach_driver+0xf7/0x150
      [<00000000f919423c>] bus_for_each_drv+0x114/0x180
      [<00000000e067feca>] __device_attach+0x1e5/0x2d0
      [<0000000054301fc2>] bus_probe_device+0x126/0x140
      [<00000000aad93b22>] device_add+0x810/0x1130
      [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0
      [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110
      [<00000000ffec4177>] of_i2c_notify+0x100/0x160
  unreferenced object 0xffff88812d3675c8 (size 8):
    comm "python3", pid 349, jiffies 4294741070 (age 95.692s)
    hex dump (first 8 bytes):
      22 00 36 2d 81 88 ff ff                          ".6-....
    backtrace:
      [<0000000068427125>] __kmalloc+0x46/0x1b0
      [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts]
      [<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts]
      [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts]
      [<00000000a310de16>] i2c_device_probe+0x651/0x680
      [<00000000f5a96bf3>] really_probe+0x17c/0x3f0
      [<00000000096ba499>] __driver_probe_device+0xe3/0x170
      [<00000000c5acb4d9>] driver_probe_device+0x49/0x120
      [<00000000264fe082>] __device_attach_driver+0xf7/0x150
      [<00000000f919423c>] bus_for_each_drv+0x114/0x180
      [<00000000e067feca>] __device_attach+0x1e5/0x2d0
      [<0000000054301fc2>] bus_probe_device+0x126/0x140
      [<00000000aad93b22>] device_add+0x810/0x1130
      [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0
      [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110
      [<00000000ffec4177>] of_i2c_notify+0x100/0x160

After BANK_SWITCH command from i2c BUS, no matter success or error
happened, the tx_buf should be freed.

Fixes: 3b384bd6 ("Input: raydium_ts_i2c - do not split tx transactions")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Link: https://lore.kernel.org/r/20221202103412.2120169-1-zhangxiaoxu5@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>