- 21 Aug, 2023 40 commits
-
-
Liam R. Howlett authored
Replacing nodes may cause a live lock-up if CPU resources are saturated by write operations on the tree by continuously retrying on dead nodes. To avoid the continuous retry scenario, ensure the new node is inserted into the tree prior to marking the old data as dead. This will define a window where old and new data is swapped. When reusing lower level nodes, ensure the parent pointer is updated after the parent is marked dead. This ensures that the child is still reachable from the top of the tree, but walking up to a dead node will result in a single retry that will start a fresh walk from the top down through the new node. Link: https://lkml.kernel.org/r/20230804165951.2661157-3-Liam.Howlett@oracle.comSigned-off-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Liam R. Howlett authored
Patch series "maple_tree: Change replacement strategy". The maple tree marks nodes dead as soon as they are going to be replaced. This could be problematic when used in the RCU context since the writer may be starved of CPU time by the readers. This patch set addresses the issue by switching the data replacement strategy to one that will only mark data as dead once the new data is available. This series changes the ordering of the node replacement so that the new data is live before the old data is marked 'dead'. When readers hit 'dead' nodes, they will restart from the top of the tree and end up in the new data. In more complex scenarios, the replacement strategy means a subtree is built and graphed into the tree leaving some nodes to point to the old parent. The view of tasks into the old data will either remain with the old data, or see the new data once the old data is marked 'dead'. Iterators will see the 'dead' node and restart on their own and switch to the new data. There is no risk of the reader seeing old data in these cases. The 'dead' subtree of data is then fully marked dead, but reused nodes will still point to the dead nodes until the parent pointer is updated. Walking up to a 'dead' node will cause a re-walk from the top of the tree and enter the new data area where old data is not reachable. Once the parent pointers are fully up to date in the active data, the 'dead' subtree is iterated to collect entirely 'dead' subtrees, and dead nodes (nodes that partially contained reused data). This patch (of 6): When dumping the tree, honour formatting request to output hex for the maple node type arange64. Link: https://lkml.kernel.org/r/20230804165951.2661157-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20230804165951.2661157-2-Liam.Howlett@oracle.comSigned-off-by:
-
Greg Kroah-Hartman authored
There are no modules using mm_kobj, so do not export it. Link: https://lkml.kernel.org/r/2023080436-algebra-cabana-417d@gregkhSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by:
Miaohe Lin <linmiaohe@huawei.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Kefeng Wang authored
It is better to use huge page size instead of PAGE_SIZE for stride when flush hugepage, which reduces the loop in __flush_tlb_range(). Let's support arch's flush_hugetlb_tlb_range(), which is used in hugetlb_unshare_all_pmds(), move_hugetlb_page_tables() and hugetlb_change_protection() for now. Note,: for hugepages based on contiguous bit, it has to be invalidated individually since the contiguous PTE bit is just a hint, the hardware may or may not take it into account. Link: https://lkml.kernel.org/r/20230802012731.62512-1-wangkefeng.wang@huawei.comSigned-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Will Deacon <will@kernel.org> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by:
-
Kefeng Wang authored
Archs may need to do special things when flushing hugepage tlb, so use the more applicable flush_hugetlb_tlb_range() instead of flush_tlb_range(). Link: https://lkml.kernel.org/r/20230801023145.17026-2-wangkefeng.wang@huawei.com Fixes: 550a7d60 ("mm, hugepages: add mremap() support for hugepage backed vma") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
-
Kemeng Shi authored
There is no behavior change to remove "else continue" code at end of scan loop. Just remove it to make code cleaner. Link: https://lkml.kernel.org/r/20230803094901.2915942-5-shikemeng@huaweicloud.comSigned-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kemeng Shi <shikemeng@huawei.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Kemeng Shi authored
The cursor is only used for page forward currently. We can simply move page forward directly to remove unnecessary cursor. Link: https://lkml.kernel.org/r/20230803094901.2915942-4-shikemeng@huaweicloud.comSigned-off-by:
-
Kemeng Shi authored
Merge the end_pfn boundary check for single page block forward and multiple page blocks forward to avoid do twice boundary check for multiple page blocks forward. Link: https://lkml.kernel.org/r/20230803094901.2915942-3-shikemeng@huaweicloud.comSigned-off-by:
-
Kemeng Shi authored
Patch series "Fixes and cleanups to compaction", v2. This series contains random fixes and cleanups to free page isolation in compaction. This is based on another compact series[1]. More details can be found in respective patches. This patch (of 4): We will set skip to page block of block_start_pfn, it's more reasonable to set compact_cached_free_pfn to page block before the block_start_pfn. Link: https://lkml.kernel.org/r/20230803094901.2915942-1-shikemeng@huaweicloud.com Link: https://lkml.kernel.org/r/20230803094901.2915942-2-shikemeng@huaweicloud.comSigned-off-by:
-
Miaohe Lin authored
The correct function name is obj_cgroup_may_zswap(). Correct the comment. Link: https://lkml.kernel.org/r/20230803120021.762279-1-linmiaohe@huawei.comSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
-
Miaohe Lin authored
Since commit 5d0a661d ("mm/page_alloc: use only one PCP list for THP-sized allocations"), local variable base is just as same as order. So remove it. No functional change intended. Link: https://lkml.kernel.org/r/20230803114934.693989-1-linmiaohe@huawei.comSigned-off-by:
-
Ruan Jinjie authored
This code is already duplicated six times, use helper function put_z3fold_locked() to release z3fold page instead of open code it to help improve code readability a bit. And add put_z3fold_locked_list() helper function to be consistent with it. No functional change involved. Link: https://lkml.kernel.org/r/20230803113824.886413-1-ruanjinjie@huawei.comSigned-off-by:
Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by:
-
SeongJae Park authored
Update DAMON usage document for newly added DAMON monitoring target type DAMOS filter. Link: https://lkml.kernel.org/r/20230802214312.110532-14-sj@kernel.orgSigned-off-by:
SeongJae Park <sj@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
SeongJae Park authored
Update DAMON ABI document for the newly added DAMON monitoring target type DAMOS filter. Link: https://lkml.kernel.org/r/20230802214312.110532-13-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Update DAMON design document for the newly added DAMON monitoring target type DAMOS filter. Link: https://lkml.kernel.org/r/20230802214312.110532-12-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Test existence of files and validity of input keyword for DAMON monitoring target based DAMOS filter on DAMON sysfs interface. Link: https://lkml.kernel.org/r/20230802214312.110532-11-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Extend DAMON sysfs interface to support the DAMON monitoring target based DAMOS filter. Users can use it via writing 'target' to the filter's 'type' file and specifying the index of the target from the corresponding DAMON context's monitoring targets list to 'target_idx' sysfs file. Link: https://lkml.kernel.org/r/20230802214312.110532-10-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
One DAMON context can have multiple monitoring targets, and DAMOS schemes are applied to all targets. In some cases, users need to apply different scheme to different targets. Retrieving monitoring results via DAMON sysfs interface' 'tried_regions' directory could be one good example. Also, there could be cases that cgroup DAMOS filter is not enough. All such use cases can be worked around by having multiple DAMON contexts having only single target, but it is inefficient in terms of resource usage, thogh the overhead is not estimated to be huge. Implement DAMON monitoring target based DAMOS filter for the case. Like address range target DAMOS filter, handle these filters in the DAMON core layer, since it is more efficient than doing in operations set layer. This also means that regions that filtered out by monitoring target type DAMOS filters are counted as not tried by the scheme. Hence, target granularity monitoring results retrieval via DAMON sysfs interface becomes available. Link: https://lkml.kernel.org/r/20230802214312.110532-9-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Update DAMON usage document for the newly added address range type DAMOS filter. Link: https://lkml.kernel.org/r/20230802214312.110532-8-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Update DAMON ABI document for address ranges type DAMOS filter files. Link: https://lkml.kernel.org/r/20230802214312.110532-7-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Update DAMON design document's DAMOS filters section for address range DAMOS filters. Because address range filters are handled by the core layer and it makes difference in schemes tried regions and schemes statistics, clearly describe it. Link: https://lkml.kernel.org/r/20230802214312.110532-6-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Add a selftest for checking existence of addr_{start,end} files under DAMOS filter directory, and 'addr' damos filter type input of DAMON sysfs interface. Link: https://lkml.kernel.org/r/20230802214312.110532-5-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
Implement a kunit test for the core of address range DAMOS filter handling, namely __damos_filter_out(). The test especially focus on regions that overlap with given filter's target address range. Link: https://lkml.kernel.org/r/20230802214312.110532-4-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Extend DAMON sysfs interface to support address range based DAMOS filters, by adding a special keyword for the filter/<N>/type file, namely 'addr', and two files under filter/<N>/ for specifying the start and the end addresses of the range, namely 'addr_start' and 'addr_end'. Link: https://lkml.kernel.org/r/20230802214312.110532-3-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Patch series "Extend DAMOS filters for address ranges and DAMON monitoring targets" There are use cases that need to apply DAMOS schemes to specific address ranges or DAMON monitoring targets. NUMA nodes in the physical address space, special memory objects in the virtual address space, and monitoring target specific efficient monitoring results snapshot retrieval could be examples of such use cases. This patchset extends DAMOS filters feature for such cases, by implementing two more filter types, namely address ranges and DAMON monitoring types. Patches sequence ---------------- The first seven patches are for the address ranges based DAMOS filter. The first patch implements the filter feature and expose it via DAMON kernel API. The second patch further expose the feature to users via DAMON sysfs interface. The third and fourth patches implement unit tests and selftests for the feature. Three patches (fifth to seventh) updating the documents follow. The following six patches are for the DAMON monitoring target based DAMOS filter. The eighth patch implements the feature in the core layer and expose it via DAMON's kernel API. The ninth patch further expose it to users via DAMON sysfs interface. Tenth patch add a selftest, and two patches (eleventh and twelfth) update documents. [1] https://lore.kernel.org/damon/20230728203444.70703-1-sj@kernel.org/ This patch (of 13): Users can know special characteristic of specific address ranges. NUMA nodes or special objects or buffers in virtual address space could be such examples. For such cases, DAMOS schemes could required to be applied to only specific address ranges. Implement yet another type of DAMOS filter for the purpose. Note that the existing filter types, namely anon pages and memcg DAMOS filters needed page level type check. Because such check can be done efficiently in the opertions set layer, those filters are handled in operations set layer. Specifically, only paddr operations set implementation supports these filters. Also, because statistics counting is done in the DAMON core layer, the regions that filtered out by these filters are counted as tried but failed to the statistics. Unlike those, address range based filters can efficiently handled in the core layer. Hence, do the handling in the layer, and count the regions that filtered out by those as the scheme has not tried for the region. This difference should clearly documented. Link: https://lkml.kernel.org/r/20230802214312.110532-1-sj@kernel.org Link: https://lkml.kernel.org/r/20230802214312.110532-2-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Update the DAMON usage document for newly added schemes/.../tried_regions/total_bytes file and the update_schemes_tried_bytes command. Link: https://lkml.kernel.org/r/20230802213222.109841-6-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Update the DAMON ABI document for newly added schemes/.../tried_regions/total_bytes file and the update_schemes_tried_bytes command. Link: https://lkml.kernel.org/r/20230802213222.109841-5-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Update sysfs.sh DAMON selftest for checking existence of 'total_bytes' file under the 'tried_regions' directory of DAMON sysfs interface. Link: https://lkml.kernel.org/r/20230802213222.109841-4-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Using tried_regions/total_bytes file, users can efficiently retrieve the total size of memory regions having specific access pattern. However, DAMON sysfs interface in kernel still populates all the infomration on the tried_regions subdirectories. That means the kernel part overhead for the construction of tried regions directories still exists. To remove the overhead, implement yet another command input for 'state' DAMON sysfs file. Writing the input to the file makes DAMON sysfs interface to update only the total_bytes file. Link: https://lkml.kernel.org/r/20230802213222.109841-3-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Patch series "mm/damon/sysfs-schemes: implement DAMOS tried total bytes file". The tried_regions directory of DAMON sysfs interface is useful for retrieving monitoring results snapshot or DAMOS debugging. However, for common use case that need to monitor only the total size of the scheme tried regions (e.g., monitoring working set size), the kernel overhead for directory construction and user overhead for reading the content could be high if the number of monitoring region is not small. This patchset implements DAMON sysfs files for efficient support of the use case. The first patch implements the sysfs file to reduce the user space overhead, and the second patch implements a command for reducing the kernel space overhead. The third patch adds a selftest for the new file, and following two patches update documents. [1] https://lore.kernel.org/damon/20230728201817.70602-1-sj@kernel.org/ This patch (of 5): The tried_regions directory can be used for retrieving the monitoring results snapshot for regions of specific access pattern, by setting the scheme's action as 'stat' and the access pattern as required. While the interface provides every detail of the monitoring results, some use cases including working set size monitoring requires only the total size of the regions. For such cases, users should read all the information and calculate the total size of the regions. However, it could incur high overhead if the number of regions is high. Add a file for retrieving only the information, namely 'total_bytes' file. It allows users to get the total size by reading only the file. Link: https://lkml.kernel.org/r/20230802213222.109841-1-sj@kernel.org Link: https://lkml.kernel.org/r/20230802213222.109841-2-sj@kernel.orgSigned-off-by:
-
Kalesh Singh authored
walk->can_swap might be invalid since it's not guaranteed to be initialized for the particular lruvec. Instead deduce it from the folio type (anon/file). Link: https://lkml.kernel.org/r/20230802025606.346758-3-kaleshsingh@google.com Fixes: 018ee47f ("mm: multi-gen LRU: exploit locality in rmap") Signed-off-by:
Kalesh Singh <kaleshsingh@google.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [mediatek] Tested-by:
Charan Teja Kalla <quic_charante@quicinc.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Aneesh Kumar K V <aneesh.kumar@linux.ibm.com> Cc: Barry Song <baohua@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Steven Barrett <steven@liquorix.net> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by:
-
Kalesh Singh authored
inc_max_seq() will try to inc_min_seq() if nr_gens == MAX_NR_GENS. This is because the generations are reused (the last oldest now empty generation will become the next youngest generation). inc_min_seq() is retried until successful, dropping the lru_lock and yielding the CPU on each failure, and retaking the lock before trying again: while (!inc_min_seq(lruvec, type, can_swap)) { spin_unlock_irq(&lruvec->lru_lock); cond_resched(); spin_lock_irq(&lruvec->lru_lock); } However, the initial condition that required incrementing the min_seq (nr_gens == MAX_NR_GENS) is not retested. This can change by another call to inc_max_seq() from run_aging() with force_scan=true from the debugfs interface. Since the eviction stalls when the nr_gens == MIN_NR_GENS, avoid unnecessarily incrementing the min_seq by rechecking the number of generations before each attempt. This issue was uncovered in previous discussion on the list by Yu Zhao and Aneesh Kumar [1]. [1] https://lore.kernel.org/linux-mm/CAOUHufbO7CaVm=xjEb1avDhHVvnC8pJmGyKcFf2iY_dpf+zR3w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20230802025606.346758-2-kaleshsingh@google.com Fixes: d6c3af7d ("mm: multi-gen LRU: debugfs interface") Signed-off-by: -
Kalesh Singh authored
MGLRU has a LRU list for each zone for each type (anon/file) in each generation: long nr_pages[MAX_NR_GENS][ANON_AND_FILE][MAX_NR_ZONES]; The min_seq (oldest generation) can progress independently for each type but the max_seq (youngest generation) is shared for both anon and file. This is to maintain a common frame of reference. In order for eviction to advance the min_seq of a type, all the per-zone lists in the oldest generation of that type must be empty. The eviction logic only considers pages from eligible zones for eviction or promotion. scan_folios() { ... for (zone = sc->reclaim_idx; zone >= 0; zone--) { ... sort_folio(); // Promote ... isolate_folio(); // Evict } ... } Consider the system has the movable zone configured and default 4 generations. The current state of the system is as shown below (only illustrating one type for simplicity): Type: ANON Zone DMA32 Normal Movable Device Gen 0 0 0 4GB 0 Gen 1 0 1GB 1MB 0 Gen 2 1MB 4GB 1MB 0 Gen 3 1MB 1MB 1MB 0 Now consider there is a GFP_KERNEL allocation request (eligible zone index <= Normal), evict_folios() will return without doing any work since there are no pages to scan in the eligible zones of the oldest generation. Reclaim won't make progress until triggered from a ZONE_MOVABLE allocation request; which may not happen soon if there is a lot of free memory in the movable zone. This can lead to OOM kills, although there is 1GB pages in the Normal zone of Gen 1 that we have not yet tried to reclaim. This issue is not seen in the conventional active/inactive LRU since there are no per-zone lists. If there are no (not enough) folios to scan in the eligible zones, move folios from ineligible zone (zone_index > reclaim_index) to the next generation. This allows for the progression of min_seq and reclaiming from the next generation (Gen 1). Qualcomm, Mediatek and raspberrypi [1] discovered this issue independently. [1] https://github.com/raspberrypi/linux/issues/5395 Link: https://lkml.kernel.org/r/20230802025606.346758-1-kaleshsingh@google.com Fixes: ac35a490 ("mm: multi-gen LRU: minimal implementation") Signed-off-by:Lecopzer Chen <lecopzer.chen@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [mediatek] Tested-by:
-
Efly Young authored
Before commit f53af428 ("mm: vmscan: fix extreme overreclaim and swap floods"), proactive reclaim will extreme overreclaim sometimes. But proactive reclaim still inaccurate and some extent overreclaim. Problematic case is easy to construct. Allocate lots of anonymous memory (e.g., 20G) in a memcg, then swapping by writing memory.recalim and there is a certain probability of overreclaim. For example, request 1G by writing memory.reclaim will eventually reclaim 1.7G or other values more than 1G. The reason is that reclaimer may have already reclaimed part of requested memory in one loop, but before adjust sc->nr_to_reclaim in outer loop, call shrink_lruvec() again will still follow the current sc->nr_to_reclaim to work. It will eventually lead to overreclaim. In theory, the amount of reclaimed would be in [request, 2 * request). Reclaimer usually tends to reclaim more than request. But either direct or kswapd reclaim have much smaller nr_to_reclaim targets, so it is less noticeable and not have much impact. Proactive reclaim can usually come in with a larger value, so the error is difficult to ignore. Considering proactive reclaim is usually low frequency, handle the batching into smaller chunks is a better approach. Link: https://lkml.kernel.org/r/20230721014116.3388-1-yangyifei03@kuaishou.comSigned-off-by:
Efly Young <yangyifei03@kuaishou.com> Suggested-by:
-
SeongJae Park authored
damos_new_filter() was having a bug that not initializing ->list field of the returning damos_filter struct, which results in access to uninitialized memory. Add a unit test for the function. Link: https://lkml.kernel.org/r/20230729203733.38949-3-sj@kernel.orgSigned-off-by:
-
Miaohe Lin authored
Since commit bef8620c ("mm: memcg: deprecate the non-hierarchical mode"), use_hierarchy is already deprecated. And it's further removed via commit 9d9d341d ("cgroup: remove obsoleted broken_hierarchy and warned_broken_hierarchy"). Update corresponding comment. Link: https://lkml.kernel.org/r/20230801124359.2266860-1-linmiaohe@huawei.comSigned-off-by:
-
Yicong Yang authored
Add comments for arch_flush_tlb_batched_pending() and arch_tlbbatch_flush() to illustrate why only a DSB is needed. Link: https://lkml.kernel.org/r/20230801124203.62164-1-yangyicong@huawei.com Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Yicong Yang <yangyicong@hisilicon.com> Reviewed-by:
Alistair Popple <apopple@nvidia.com> Reviewed-by:
-
Miaohe Lin authored
When free_pages is 0, alike_pages is not used. So alike_pages calculation can be avoided by checking free_pages early to save cpu cycles. Also fix typo 'comparable'. It should be 'compatible' here. Link: https://lkml.kernel.org/r/20230801123723.2225543-1-linmiaohe@huawei.comSigned-off-by:
-
Kefeng Wang authored
Use the helpers to simplify code, also kill unneeded goto cpy_name. Link: https://lkml.kernel.org/r/20230728050043.59880-5-wangkefeng.wang@huawei.comSigned-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Göttsche <cgzones@googlemail.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Eric Paris <eparis@parisplace.org> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by:
-
Kefeng Wang authored
Use the helpers to simplify code. Link: https://lkml.kernel.org/r/20230728050043.59880-4-wangkefeng.wang@huawei.comSigned-off-by:
Paul Moore <paul@paul-moore.com> Reviewed-by:
-
