- 07 Oct, 2016 31 commits
-
-
Erez Shitrit authored
commit 68c6bcdd upstream. The function send_leave sets the member: group->query_id (group->query_id = ret) after calling the sa_query, but leave_handler can be executed before the setting and it might delete the group object, and will get a memory corruption. Additionally, this patch gets rid of group->query_id variable which is not used. Fixes: faec2f7b ('IB/sa: Track multicast join/leave requests') Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Erez Shitrit authored
commit 546481c2 upstream. When a new CM connection is being requested, ipoib driver copies data from the path pointer in the CM/tx object, the path object might be invalid at the point and memory corruption will happened later when now the CM driver will try using that data. The next scenario demonstrates it: neigh_add_path --> ipoib_cm_create_tx --> queue_work (pointer to path is in the cm/tx struct) #while the work is still in the queue, #the port goes down and causes the ipoib_flush_paths: ipoib_flush_paths --> path_free --> kfree(path) #at this point the work scheduled starts. ipoib_cm_tx_start --> copy from the (invalid)path pointer: (memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);) -> memory corruption. To fix that the driver now starts the CM/tx connection only if that specific path exists in the general paths database. This check is protected with the relevant locks, and uses the gid from the neigh member in the CM/tx object which is valid according to the ref count that was taken by the CM/tx. Fixes: 839fcaba ('IPoIB: Connected mode experimental support') Signed-off-by:
-
Radim Krčmář authored
commit dccbfcf5 upstream. If vmcs12 does not intercept APIC_BASE writes, then KVM will handle the write with vmcs02 as the current VMCS. This will incorrectly apply modifications intended for vmcs01 to vmcs02 and L2 can use it to gain access to L0's x2APIC registers by disabling virtualized x2APIC while using msr bitmap that assumes enabled. Postpone execution of vmx_set_virtual_x2apic_mode until vmcs01 is the current VMCS. An alternative solution would temporarily make vmcs01 the current VMCS, but it requires more care. Fixes: 8d14695f ("x86, apicv: add virtual x2apic support") Reported-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Peter Ujfalusi authored
commit a8719670 upstream. Fixes: ddd17531 ("ASoC: omap-mcpdm: Clean up with devm_* function") Managed irq request will not doing any good in ASoC probe level as it is not going to free up the irq when the driver is unbound from the sound card. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by:
Russell King <linux@armlinux.org.uk> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Michael Ellerman authored
commit 66443efa upstream. When booting from an OpenFirmware which supports it, we use the "ibm,client-architecture-support" firmware call to communicate our capabilities to firmware. The format of the structure we pass to firmware is specified in PAPR (Power Architecture Platform Requirements), or the public version LoPAPR (Linux on Power Architecture Platform Reference). Referring to table 244 in LoPAPR v1.1, option vector 5 contains a 4 byte field at bytes 17-20 for the "Platform Facilities Enable". This is followed by a 1 byte field at byte 21 for "Sub-Processor Represenation Level". Comparing to the code, there we have the Platform Facilities options (OV5_PFO_*) at byte 17, but we fail to pad that field out to its full width of 4 bytes. This means the OV5_SUB_PROCESSORS option is incorrectly placed at byte 18. Fix it by adding zero bytes for bytes 18, 19, 20, and comment the bytes to hopefully make it clearer in future. As far as I'm aware nothing actually consumes this value at this time, so the effect of this bug is nil in practice. It does mean we've been incorrectly setting bit 15 of the "Platform Facilities Enable" option for the past ~3 1/2 years, so we should avoid allocating that bit to anything else in future. Fixes: df77c799 ("powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Florian Fainelli authored
commit f823a2aa upstream. wlc_phy_txpower_get_current() does a logical OR of power->flags, which presumes that power.flags was initiliazed earlier by the caller, unfortunately, this is not the case, so make sure we zero out the struct tx_power before calling into wlc_phy_txpower_get_current(). Reported-by: coverity (CID 146011) Fixes: 5b435de0 ("net: wireless: add brcm80211 drivers") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Florian Fainelli authored
commit 5c5fa1f4 upstream. In case dma_mapping_error() returns an error in dma_rxfill, we would be leaking a packet that we allocated with brcmu_pkt_buf_get_skb(). Reported-by: coverity (CID 1081819) Fixes: 67d0cf50 ("brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error()") Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Chuck Lever authored
commit a4e187d8 upstream. Before commit 778be232 ("NFS do not find client in NFSv4 pg_authenticate"), the Linux callback server replied with RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB request. Let's restore that behavior so the server has a chance to do something useful about it, and provide a warning that helps admins correct the problem. Fixes: 778be232 ("NFS do not find client in NFSv4 ...") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Chuck Lever authored
commit 0533b130 upstream. If an RPC program does not set vs_dispatch and pc_func() returns rpc_drop_reply, the server sends a reply anyway containing a single word containing the value RPC_DROP_REPLY (in network byte-order, of course). This is a nonsense RPC message. Fixes: 9e701c61 ("svcrpc: simpler request dropping") Signed-off-by:
-
Dan Carpenter authored
commit 55f1cf83 upstream. The pio_dev[] array has MAX_NR_PIO_DEVICES elements so the > should be >=. Fixes: 5f97f7f9 ('[PATCH] avr32 architecture') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
commit d7e92e15 upstream. When CONFIG_INPUT is disabled, multiple gspca backend drivers print compile-time warnings about unused variables: media/usb/gspca/cpia1.c: In function 'sd_stopN': media/usb/gspca/cpia1.c:1627:13: error: unused variable 'sd' [-Werror=unused-variable] media/usb/gspca/konica.c: In function 'sd_stopN': media/usb/gspca/konica.c:246:13: error: unused variable 'sd' [-Werror=unused-variable] This annotates the variables as __maybe_unused, to let the compiler know that they are declared intentionally. Fixes: ee186fd9 ("[media] gscpa_t613: Add support for the camera button") Fixes: c2f644ae ("[media] gspca_cpia1: Add support for button") Fixes: b517af72 ("V4L/DVB: gspca_konica: New gspca subdriver for konica chipset using cams") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Dan Carpenter authored
commit e44c153b upstream. The code is checking for negative returns but it should be checking for zero. Fixes: aab3125c ('[media] em28xx: add support for registering multiple i2c buses') Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
James Hogan authored
commit cdf8b463 upstream. AT_VECTOR_SIZE_ARCH should be defined with the maximum number of NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined for tile at all even though ARCH_DLINFO will contain one NEW_AUX_ENT for the VDSO address. This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for AT_BASE_PLATFORM which tile doesn't use, but lets define it now and add the comment above ARCH_DLINFO as found in several other architectures to remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to date. Fixes: 4a556f4f ("tile: implement gettimeofday() via vDSO") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Nishanth Menon authored
commit 61dc0a44 upstream. pm_runtime_get_sync does return a error value that must be checked for error conditions, else, due to various reasons, the device maynot be enabled and the system will crash due to lack of clock to the hardware module. Before: 12.562784] [00000000] *pgd=fe193835 12.562792] Internal error: : 1406 [#1] SMP ARM [...] 12.562864] CPU: 1 PID: 241 Comm: modprobe Not tainted 4.7.0-rc4-next-20160624 #2 12.562867] Hardware name: Generic DRA74X (Flattened Device Tree) 12.562872] task: ed51f140 ti: ed44c000 task.ti: ed44c000 12.562886] PC is at omap4_rng_init+0x20/0x84 [omap_rng] 12.562899] LR is at set_current_rng+0xc0/0x154 [rng_core] [...] After the proper checks: [ 94.366705] omap_rng 48090000.rng: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 94.375767] omap_rng 48090000.rng: Failed to runtime_get device -19 [ 94.382351] omap_rng 48090000.rng: initialization failed. Fixes: 665d92fa ("hwrng: OMAP: convert to use runtime PM") Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Russell King authored
commit 06dfe5cc upstream. SA1111 PCMCIA was broken when PCMCIA switched to using dev_pm_ops for the PCMCIA socket class. PCMCIA used to handle suspend/resume via the socket hosting device, which happened at normal device suspend/resume time. However, the referenced commit changed this: much of the resume now happens much earlier, in the noirq resume handler of dev_pm_ops. However, on SA1111, the PCMCIA device is not accessible as the SA1111 has not been resumed at _noirq time. It's slightly worse than that, because the SA1111 has already been put to sleep at _noirq time, so suspend doesn't work properly. Fix this by converting the core SA1111 code to use dev_pm_ops as well, and performing its own suspend/resume at noirq time. This fixes these errors in the kernel log: pcmcia_socket pcmcia_socket0: time out after reset pcmcia_socket pcmcia_socket1: time out after reset and the resulting lack of PCMCIA cards after a S2RAM cycle. Fixes: d7646f76 ("pcmcia: use dev_pm_ops for class pcmcia_socket_class") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
commit da60626e upstream. Clear the current reset status prior to rebooting the platform. This adds the bit missing from 04fef228 ("[ARM] pxa: introduce reset_status and clear_reset_status for driver's usage"). Fixes: 04fef228 ("[ARM] pxa: introduce reset_status and clear_reset_status for driver's usage") Signed-off-by:
-
Nicolas Iooss authored
commit ae6c33ba upstream. Commit bbeddf52 ("printk: move braille console support into separate braille.[ch] files") moved the parsing of braille-related options into _braille_console_setup(), changing the type of variable str from char* to char**. In this commit, memcmp(str, "brl,", 4) was correctly updated to memcmp(*str, "brl,", 4) but not memcmp(str, "brl=", 4). Update the code to make "brl=" option work again and replace memcmp() with strncmp() to make the compiler able to detect such an issue. Fixes: bbeddf52 ("printk: move braille console support into separate braille.[ch] files") Link: http://lkml.kernel.org/r/20160823165700.28952-1-nicolas.iooss_linux@m4x.orgSigned-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Paul Burton authored
commit 305723ab upstream. Malta boards used with CPU emulators feature a switch to disable use of an IOCU. Software has to check this switch & ignore any present IOCU if the switch is closed. The read used to do this was unsafe for 64 bit kernels, as it simply casted the address 0xbf403000 to a pointer & dereferenced it. Whilst in a 32 bit kernel this would access kseg1, in a 64 bit kernel this attempts to access xuseg & results in an address error exception. Fix by accessing a correctly formed ckseg1 address generated using the CKSEG1ADDR macro. Whilst modifying this code, define the name of the register and the bit we care about within it, which indicates whether PCI DMA is routed to the IOCU or straight to DRAM. The code previously checked that bit 0 was also set, but the least significant 7 bits of the CONFIG_GEN0 register contain the value of the MReqInfo signal provided to the IOCU OCP bus, so singling out bit 0 makes little sense & that part of the check is dropped. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: b6d92b4a ("MIPS: Add option to disable software I/O coherency.") Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14187/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Will Deacon authored
commit 3a402a70 upstream. When TIF_SINGLESTEP is set for a task, the single-step state machine is enabled and we must take care not to reset it to the active-not-pending state if it is already in the active-pending state. Unfortunately, that's exactly what user_enable_single_step does, by unconditionally setting the SS bit in the SPSR for the current task. This causes failures in the GDB testsuite, where GDB ends up missing expected step traps if the instruction being stepped generates another trap, e.g. PTRACE_EVENT_FORK from an SVC instruction. This patch fixes the problem by preserving the current state of the stepping state machine when TIF_SINGLESTEP is set on the current thread. Cc: <stable@vger.kernel.org> Reported-by:
Yao Qi <yao.qi@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Srinivas Ramana authored
commit 117e5e9c upstream. If the bootloader uses the long descriptor format and jumps to kernel decompressor code, TTBCR may not be in a right state. Before enabling the MMU, it is required to clear the TTBCR.PD0 field to use TTBR0 for translation table walks. The commit dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but doesn't consider all the bits for the size of TTBCR.N. Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to indicate the use of TTBR0 and the correct base address width. Fixes: dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") Acked-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Srinivas Ramana <sramana@codeaurora.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Dan Carpenter authored
commit f4693b08 upstream. We can't assign -EINVAL to a u16. Fixes: 3948f0e0 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Sara Sharon authored
commit d5d0689a upstream. This fixes a pretty ancient bug that hasn't manifested itself until now. The scratchbuf for command queue is allocated only for 32 slots but is accessed with the queue write pointer - which can be up to 256. Since the scratch buf size was 16 and there are up to 256 TFDs we never passed a page boundary when accessing the scratch buffer, but when attempting to increase the size of the scratch buffer a panic was quick to follow when trying to access the address resulted in a page boundary. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Fixes: 38c0f334 ("iwlwifi: use coherent DMA memory for command header") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Michael Walle authored
commit b53893aa upstream. According to the datasheet you should only write 1 to this bit. If it is not set, at least AIN3 will return bad values on newer silicon revisions. Fixes: d84ca5b3 ("hwmon: Add driver for ADT7411 voltage and temperature sensor") Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Dan Carpenter authored
commit 2d6a4d64 upstream. The curly braces are missing here so we print stuff unintentionally. Fixes: 9da4714a ('slub: slabinfo update for cmpxchg handling') Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwandaSigned-off-by:
Christoph Lameter <cl@linux.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Laura Abbott <labbott@fedoraproject.org> Signed-off-by:
-
Robin Murphy authored
commit ba6dea4f upstream. Whilst MPIDR values themselves are less than 32 bits, it is still perfectly valid for a DT to have #address-cells > 1 in the CPUs node, resulting in the "reg" property having leading zero cell(s). In that situation, the big-endian nature of the data conspires with the current behaviour of only reading the first cell to cause the kernel to think all CPUs have ID 0, and become resoundingly unhappy as a consequence. Take the full property length into account when parsing CPUs so as to be correct under any circumstances. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Alex Deucher authored
commit 670bb4fd upstream. Add clock quirks for Jet parts. Reviewed-by:
Sonny Jiang <sonny.jiang@amd.com> Tested-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Sergei Miroshnichenko authored
commit 9abefcb1 upstream. A timer was used to restart after the bus-off state, leading to a relatively large can_restart() executed in an interrupt context, which in turn sets up pinctrl. When this happens during system boot, there is a high probability of grabbing the pinctrl_list_mutex, which is locked already by the probe() of other device, making the kernel suspect a deadlock condition [1]. To resolve this issue, the restart_timer is replaced by a delayed work. [1] https://github.com/victronenergy/venus/issues/24Signed-off-by:
Sergei Miroshnichenko <sergeimir@emcraft.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
zhong jiang authored
commit 5b398e41 upstream. I hit the following hung task when runing a OOM LTP test case with 4.1 kernel. Call trace: [<ffffffc000086a88>] __switch_to+0x74/0x8c [<ffffffc000a1bae0>] __schedule+0x23c/0x7bc [<ffffffc000a1c09c>] schedule+0x3c/0x94 [<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350 [<ffffffc000a1e32c>] down_write+0x64/0x80 [<ffffffc00021f794>] __ksm_exit+0x90/0x19c [<ffffffc0000be650>] mmput+0x118/0x11c [<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74 [<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4 [<ffffffc0000d0f34>] get_signal+0x444/0x5e0 [<ffffffc000089fcc>] do_signal+0x1d8/0x450 [<ffffffc00008a35c>] do_notify_resume+0x70/0x78 The oom victim cannot terminate because it needs to take mmap_sem for write while the lock is held by ksmd for read which loops in the page allocator ksm_do_scan scan_get_next_rmap_item down_read get_next_rmap_item alloc_rmap_item #ksmd will loop permanently. There is no way forward because the oom victim cannot release any memory in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve this problem because it would release the memory asynchronously. Nevertheless we can relax alloc_rmap_item requirements and use __GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan would just retry later after the lock got dropped. Such a patch would be also easy to backport to older stable kernels which do not have oom_reaper. While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed by the allocation failure. Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Suggested-by:
Hugh Dickins <hughd@google.com> Suggested-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
-
Karl Beldan authored
commit f6d7c1b5 upstream. This fixes subpage writes when using 4-bit HW ECC. There has been numerous reports about ECC errors with devices using this driver for a while. Also the 4-bit ECC has been reported as broken with subpages in [1] and with 16 bits NANDs in the driver and in mach* board files both in mainline and in the vendor BSPs. What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to try reinitializing the ECC engine: - R/W on whole pages properly generates/checks RS code - try writing the 1st subpage only of a blank page, the subpage is well written and the RS code properly generated, re-reading the same page the HW detects some ECC error, reading the same page again no ECC error is detected Note that the ECC engine is already reinitialized in the 1-bit case. Tested on my LCDK with UBI+UBIFS using subpages. This could potentially get rid of the issue workarounded in [1]. [1] 28c015a9 ("mtd: davinci-nand: disable subpage write for keystone-nand") Fixes: 6a4123e5 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage") Signed-off-by:
Karl Beldan <kbeldan@baylibre.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Michael Ellerman authored
commit e8a4fd0a upstream. The encoding of the lengths in the ibm_architecture_vec array is "interesting" to say the least. It's non-obvious how the number of bytes we provide relates to the length value. In fact we already got it wrong once, see 11e9ed43 "Fix up ibm_architecture_vec definition". So add some macros to make it (hopefully) clearer. These at least have the property that the integer present in the code is equal to the number of bytes that follows it. Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
Peter Zijlstra authored
commit ecf7d01c upstream. Oleg noticed that its possible to falsely observe p->on_cpu == 0 such that we'll prematurely continue with the wakeup and effectively run p on two CPUs at the same time. Even though the overlap is very limited; the task is in the middle of being scheduled out; it could still result in corruption of the scheduler data structures. CPU0 CPU1 set_current_state(...) <preempt_schedule> context_switch(X, Y) prepare_lock_switch(Y) Y->on_cpu = 1; finish_lock_switch(X) store_release(X->on_cpu, 0); try_to_wake_up(X) LOCK(p->pi_lock); t = X->on_cpu; // 0 context_switch(Y, X) prepare_lock_switch(X) X->on_cpu = 1; finish_lock_switch(Y) store_release(Y->on_cpu, 0); </preempt_schedule> schedule(); deactivate_task(X); X->on_rq = 0; if (X->on_rq) // false if (t) while (X->on_cpu) cpu_relax(); context_switch(X, ..) finish_lock_switch(X) store_release(X->on_cpu, 0); Avoid the load of X->on_cpu being hoisted over the X->on_rq load. Reported-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by:
-
- 06 Oct, 2016 9 commits
-
-
Jeff Mahoney authored
Prior to v3.17, XFS used positive error codes internally. Commit af8d9716 (xfs: inode recovery readahead can race with inode buffer creation), upstream commit b79f4a1c backported from later releases need the error code signs reversed. Negative error codes will cause assertion failures (BUG_ON on kernels with assertions enabled. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 51093254 upstream. Let the target core check task existence instead of the SRP target driver. Additionally, let the target core check the validity of the task management request instead of the ib_srpt driver. This patch fixes the following kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffffa0565f37>] srpt_handle_new_iu+0x6d7/0x790 [ib_srpt] Oops: 0002 [#1] SMP Call Trace: [<ffffffffa05660ce>] srpt_process_completion+0xde/0x570 [ib_srpt] [<ffffffffa056669f>] srpt_compl_thread+0x13f/0x160 [ib_srpt] [<ffffffff8109726f>] kthread+0xcf/0xe0 [<ffffffff81613cfc>] ret_from_fork+0x7c/0xb0 Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Fixes: 3e4f5748 ("ib_srpt: Convert TMR path to target_submit_tmr") Tested-by:
Alex Estrin <alex.estrin@intel.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Oliver Neukum authored
commit 60bcabd0 upstream. This fixes the oops discovered by the Umap2 project and Alan Stern. The intf member needs to be set before the firmware is downloaded. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kinglong Mee authored
commit 3f42d2c4 upstream. Connection from alloc_conn must be freed through free_conn, otherwise, the reference of svc_xprt will never be put. Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Michal Hocko authored
commit 735f2770 upstream. Commit fec1d011 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit") has caused a subtle regression in nscd which uses CLONE_CHILD_CLEARTID to clear the nscd_certainly_running flag in the shared databases, so that the clients are notified when nscd is restarted. Now, when nscd uses a non-persistent database, clients that have it mapped keep thinking the database is being updated by nscd, when in fact nscd has created a new (anonymous) one (for non-persistent databases it uses an unlinked file as backend). The original proposal for the CLONE_CHILD_CLEARTID change claimed (https://lkml.org/lkml/2006/10/25/233): : The NPTL library uses the CLONE_CHILD_CLEARTID flag on clone() syscalls : on behalf of pthread_create() library calls. This feature is used to : request that the kernel clear the thread-id in user space (at an address : provided in the syscall) when the thread disassociates itself from the : address space, which is done in mm_release(). : : Unfortunately, when a multi-threaded process incurs a core dump (such as : from a SIGSEGV), the core-dumping thread sends SIGKILL signals to all of : the other threads, which then proceed to clear their user-space tids : before synchronizing in exit_mm() with the start of core dumping. This : misrepresents the state of process's address space at the time of the : SIGSEGV and makes it more difficult for someone to debug NPTL and glibc : problems (misleading him/her to conclude that the threads had gone away : before the fault). : : The fix below is to simply avoid the CLONE_CHILD_CLEARTID action if a : core dump has been initiated. The resulting patch from Roland (https://lkml.org/lkml/2006/10/26/269) seems to have a larger scope than the original patch asked for. It seems that limitting the scope of the check to core dumping should work for SIGSEGV issue describe above. [Changelog partly based on Andreas' description] Fixes: fec1d011 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit") Link: http://lkml.kernel.org/r/1471968749-26173-1-git-send-email-mhocko@kernel.orgSigned-off-by:
William Preston <wpreston@suse.com> Acked-by:
-
Vitaly Kuznetsov authored
commit 32a15832 upstream. It looks like clockevents_unbind is being exported by mistake as: - it is static; - it is not listed in include/linux/clockchips.h; - EXPORT_SYMBOL_GPL(clockevents_unbind) follows clockevents_unbind_device() implementation. I think clockevents_unbind_device should be exported instead. This is going to be used to teardown Hyper-V clockevent devices on module unload. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Joerg Roedel authored
commit 3254de6b upstream. Not doing so might cause IO-Page-Faults when a device uses an alias request-id and the alias-dte is left in a lower page-mode which does not cover the address allocated from the iova-allocator. Fixes: 492667da ('x86/amd-iommu: Remove amd_iommu_pd_table') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
WANG Cong authored
commit 205e1e25 upstream. Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcd ("ppp: take reference on channels netns") Reported-by:
Matt Bennett <Matt.Bennett@alliedtelesis.co.nz> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Khem Raj authored
commit 1e407ee3 upstream. gcc-6 correctly warns about a out of bounds access arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds] offsetof(struct thread_fp_state, fpr[32][0])); ^ check the end of array instead of beginning of next element to fix this Signed-off-by:
Khem Raj <raj.khem@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Segher Boessenkool <segher@kernel.crashing.org> Tested-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
