Expose memory scan/reclaim information to the host side via virtio
balloon device.

Now we have a metric to analyze the memory performance:

y: counter increases
n: counter does not changes
h: the rate of counter change is high
l: the rate of counter change is low

OOM: VIRTIO_BALLOON_S_OOM_KILL
STALL: VIRTIO_BALLOON_S_ALLOC_STALL
ASCAN: VIRTIO_BALLOON_S_SCAN_ASYNC
DSCAN: VIRTIO_BALLOON_S_SCAN_DIRECT
ARCLM: VIRTIO_BALLOON_S_RECLAIM_ASYNC
DRCLM: VIRTIO_BALLOON_S_RECLAIM_DIRECT

- OOM[y], STALL[*], ASCAN[*], DSCAN[*], ARCLM[*], DRCLM[*]:
  the guest runs under really critial memory pressure

- OOM[n], STALL[h], ASCAN[*], DSCAN[l], ARCLM[*], DRCLM[l]:
  the memory allocation stalls due to cgroup, not the global memory
  pressure.

- OOM[n], STALL[h], ASCAN[*], DSCAN[h], ARCLM[*], DRCLM[h]:
  the memory allocation stalls due to global memory pressure. The
  performance gets hurt a lot. A high ratio between DRCLM/DSCAN shows
  quite effective memory reclaiming.

- OOM[n], STALL[h], ASCAN[*], DSCAN[h], ARCLM[*], DRCLM[l]:
  the memory allocation stalls due to global memory pressure.
  the ratio between DRCLM/DSCAN gets low, the guest OS is thrashing
  heavily, the serious case leads poor performance and difficult
  trouble shooting. Ex, sshd may block on memory allocation when
  accepting new connections, a user can't login a VM by ssh command.

- OOM[n], STALL[n], ASCAN[h], DSCAN[n], ARCLM[l], DRCLM[n]:
  the low ratio between ARCLM/ASCAN shows that the guest tries to
  reclaim more memory, but it can't. Once more memory is required in
  future, it will struggle to reclaim memory.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-5-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Memory allocation stall counter represents the performance/latency of
memory allocation, expose this counter to the host side by virtio
balloon device via out-of-bound way.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-4-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When the guest OS runs under critical memory pressure, the guest
starts to kill processes. A guest monitor agent may scan 'oom_kill'
from /proc/vmstat, and reports the OOM KILL event. However, the agent
may be killed and we will loss this critical event(and the later
events).

For now we can also grep for magic words in guest kernel log from host
side. Rather than this unstable way, virtio balloon reports OOM-KILL
invocations instead.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-3-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

If a pmem device is in a bad status, the driver side could wait for
host ack forever in virtio_pmem_flush(), causing the system to hang.

So add a status check in the beginning of virtio_pmem_flush() to return
early if the device is not activated.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Message-Id: <20240826215313.2673566-1-philipchen@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com

We used to call irq_bypass_unregister_producer() in
vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the
token pointer is still valid or not.

Actually, we use the eventfd_ctx as the token so the life cycle of the
token should be bound to the VHOST_SET_VRING_CALL instead of
vhost_vdpa_setup_vq_irq() which could be called by set_status().

Fixing this by setting up irq bypass producer's token when handling
VHOST_SET_VRING_CALL and un-registering the producer before calling
vhost_vring_ioctl() to prevent a possible use after free as eventfd
could have been released in vhost_vring_ioctl(). And such registering
and unregistering will only be done if DRIVER_OK is set.
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 2cf1ba9a ("vhost_vdpa: implement IRQ offloading in vhost_vdpa")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240816031900.18013-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Certain error paths from mlx5_vdpa_dev_add() can end up releasing mr
resources which never got initialized in the first place.

This patch adds the missing check in mlx5_vdpa_destroy_mr_resources()
to block releasing non-initialized mr resources.

Reference trace:

  mlx5_core 0000:08:00.2: mlx5_vdpa_dev_add:3274:(pid 2700) warning: No mac address provisioned?
  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 140216067 P4D 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 8 PID: 2700 Comm: vdpa Kdump: loaded Not tainted 5.14.0-496.el9.x86_64 #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb]
  Code: [...]
  RSP: 0018:ff1c823ac23077f0 EFLAGS: 00010246
  RAX: ffffffffc1a21a60 RBX: ffffffff899567a0 RCX: 0000000000000000
  RDX: ffffffffffffffff RSI: 0000000000000000 RDI: 0000000000000000
  RBP: ff1bda1f7c21e800 R08: 0000000000000000 R09: ff1c823ac2307670
  R10: ff1c823ac2307668 R11: ffffffff8a9e7b68 R12: 0000000000000000
  R13: 0000000000000000 R14: ff1bda1f43e341a0 R15: 00000000ffffffea
  FS:  00007f56eba7c740(0000) GS:ff1bda269f800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000104d90001 CR4: 0000000000771ef0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:

   ? show_trace_log_lvl+0x1c4/0x2df
   ? show_trace_log_lvl+0x1c4/0x2df
   ? mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa]
   ? __die_body.cold+0x8/0xd
   ? page_fault_oops+0x134/0x170
   ? __irq_work_queue_local+0x2b/0xc0
   ? irq_work_queue+0x2c/0x50
   ? exc_page_fault+0x62/0x150
   ? asm_exc_page_fault+0x22/0x30
   ? __pfx_mlx5_vdpa_free+0x10/0x10 [mlx5_vdpa]
   ? vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb]
   mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa]
   vdpa_release_dev+0x1e/0x50 [vdpa]
   device_release+0x31/0x90
   kobject_cleanup+0x37/0x130
   mlx5_vdpa_dev_add+0x2d2/0x7a0 [mlx5_vdpa]
   vdpa_nl_cmd_dev_add_set_doit+0x277/0x4c0 [vdpa]
   genl_family_rcv_msg_doit+0xd9/0x130
   genl_family_rcv_msg+0x14d/0x220
   ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa]
   ? _copy_to_user+0x1a/0x30
   ? move_addr_to_user+0x4b/0xe0
   genl_rcv_msg+0x47/0xa0
   ? __import_iovec+0x46/0x150
   ? __pfx_genl_rcv_msg+0x10/0x10
   netlink_rcv_skb+0x54/0x100
   genl_rcv+0x24/0x40
   netlink_unicast+0x245/0x370
   netlink_sendmsg+0x206/0x440
   __sys_sendto+0x1dc/0x1f0
   ? do_read_fault+0x10c/0x1d0
   ? do_pte_missing+0x10d/0x190
   __x64_sys_sendto+0x20/0x30
   do_syscall_64+0x5c/0xf0
   ? __count_memcg_events+0x4f/0xb0
   ? mm_account_fault+0x6c/0x100
   ? handle_mm_fault+0x116/0x270
   ? do_user_addr_fault+0x1d6/0x6a0
   ? do_syscall_64+0x6b/0xf0
   ? clear_bhb_loop+0x25/0x80
   ? clear_bhb_loop+0x25/0x80
   ? clear_bhb_loop+0x25/0x80
   ? clear_bhb_loop+0x25/0x80
   ? clear_bhb_loop+0x25/0x80
   entry_SYSCALL_64_after_hwframe+0x78/0x80

Fixes: 512c0cdd ("vdpa/mlx5: Decouple cvq iotlb handling from hw mapping code")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240827160808.2448017-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>

Pull smb client fixes from Steve French:

 - copy_file_range fix

 - two read fixes including read past end of file rc fix and read retry
   crediting fix

 - falloc zero range fix

* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
  cifs: Fix copy offload to flush destination region
  netfs, cifs: Fix handling of short DIO read
  cifs: Fix lack of credit renegotiation on read retry

Push bcachefs fixes from Kent Overstreet:
 "The data corruption in the buffered write path is troubling; inode
  lock should not have been able to cause that...

   - Fix a rare data corruption in the rebalance path, caught as a nonce
     inconsistency on encrypted filesystems

   - Revert lockless buffered write path

   - Mark more errors as autofix"

* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
  bcachefs: Mark more errors as autofix
  bcachefs: Revert lockless buffered IO path
  bcachefs: Fix bch2_extents_match() false positive
  bcachefs: Fix failure to return error in data_update_index_update()

errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.

note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We had a report of data corruption on nixos when building installer
images.

https://github.com/NixOS/nixpkgs/pull/321055#issuecomment-2184131334

It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.

Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.

It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.

Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.

My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.

Fixes: 7e64c86c ("bcachefs: Buffered write path now can avoid the inode lock")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull misc fixes from Guenter Roeck.

These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  apparmor: fix policy_unpack_test on big endian systems
  Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
  microblaze: don't treat zero reserved memory regions as error

Pull power sequencing fix from Bartosz Golaszewski:
 "A follow-up fix for the power sequencing subsystem. It turned out the
  previous fix for this driver was incomplete and broke the WLAN support
  on some platforms. This addresses the issue.

   - set the direction of the wlan-enable GPIO to output after
     requesting it as-is"

* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  power: sequencing: qcom-wcn: set the wlan-enable GPIO to output

Commit a9aaf1ff ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.

Fixes: a9aaf1ff ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/20240823115500.37280-1-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 6.11-rc6.  Included in here are:

   - dwc3 driver fixes for reported issues

   - MAINTAINER file update, marking a driver as unsupported :(

   - cdnsp driver fixes

   - USB gadget driver fix

   - USB sysfs fix

   - other tiny fixes

   - new device ids for usb serial driver

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add MeiG Smart SRM825L
  usb: cdnsp: fix for Link TRB with TC
  usb: dwc3: st: add missing depopulate in probe error path
  usb: dwc3: st: fix probed platform device ref count on probe error path
  usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
  usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
  usb: typec: fsa4480: Relax CHIP_ID check
  usb: dwc3: xilinx: add missing depopulate in probe error path
  usb: dwc3: omap: add missing depopulate in probe error path
  dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
  usb: gadget: uvc: queue pump work in uvcg_video_enable()
  cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
  usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
  usb: dwc3: core: Prevent USB core invalid event buffer address access
  MAINTAINERS: Mark UVC gadget driver as orphan

Pull SCSI fixes from James Bottomley:
 "Minor fixes only.

  The sd.c one ignores a sync cache request if format is in progress
  which can happen if formatting a drive across suspend/resume"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
  scsi: aacraid: Fix double-free on probe failure
  scsi: lpfc: Fix overflow build issue

Pull nfsd fix from Chuck Lever:

 - One more write delegation fix

* tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease

Pull xfs fixes from Chandan Babu:

 - Do not call out v1 inodes with non-zero di_nlink field as being
   corrupt

 - Change xfs_finobt_count_blocks() to count "free inode btree" blocks
   rather than "inode btree" blocks

 - Don't report the number of trimmed bytes via FITRIM because the
   underlying storage isn't required to do anything and failed discard
   IOs aren't reported to the caller anyway

 - Fix incorrect setting of rm_owner field in an rmap query

 - Report missing disk offset range in an fsmap query

 - Obtain m_growlock when extending realtime section of the filesystem

 - Reset rootdir extent size hint after extending realtime section of
   the filesystem

* tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: reset rootdir extent size hint after growfsrt
  xfs: take m_growlock when running growfsrt
  xfs: Fix missing interval for missing_owner in xfs fsmap
  xfs: use XFS_BUF_DADDR_NULL for daddrs in getfsmap code
  xfs: Fix the owner setting issue for rmap query in xfs fsmap
  xfs: don't bother reporting blocks trimmed via FITRIM
  xfs: xfs_finobt_count_blocks() walks the wrong btree
  xfs: fix folio dirtying for XFILE_ALLOC callers
  xfs: fix di_onlink checking for V1/V2 inodes

Pull ARM SoC fixes from Arnd Bergmann:
 "There is a fairly large number of bug fixes for Qualcomm platforms,
  most of them addressing issues with the devicetree files for the newly
  added Snapdragon X1 based laptops to make them more reliable.

  The Qualcomm driver changes address a few build-time issues as well as
  runtime problems in the tzmem and scm firmware, the USB Type-C driver,
  and the cmd-db and pmic_glink soc drivers.

  The NXP i.MX usually gets a bunch of devicetree fixes that is
  proportional to the number of supported machines. This includes both
  warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
  layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
  board.

  The other changes are the usual minor changes, including an update to
  the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
  (risc-v)"

* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
  firmware: microchip: fix incorrect error report of programming:timeout on success
  soc: qcom: pd-mapper: Fix singleton refcount
  firmware: qcom: tzmem: disable sdm670 platform
  soc: qcom: pmic_glink: Actually communicate when remote goes down
  usb: typec: ucsi: Move unregister out of atomic section
  soc: qcom: pmic_glink: Fix race during initialization
  firmware: qcom: qseecom: remove unused functions
  firmware: qcom: tzmem: fix virtual-to-physical address conversion
  firmware: qcom: scm: Mark get_wq_ctx() as atomic call
  arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
  arm64: dts: qcom: disable GPU on x1e80100 by default
  arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
  arm64: dts: imx95: correct L3Cache cache-sets
  arm64: dts: imx95: correct a55 power-domains
  arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
  arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
  ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
  arm64: dts: imx93: update default value for snps,clk-csr
  arm64: dts: freescale: tqma9352: Fix watchdog reset
  arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
  ...

Pull input fix from Dmitry Torokhov:

 - a fix for Cypress PS/2 touchpad for regression introduced in 6.11
   merge window where a timeout condition is incorrectly reported for
   all extended Cypress commands

* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cypress_ps2 - fix waiting for command response

Pull pci fixes from Bjorn Helgaas:

 - Add Manivannan Sadhasivam as PCI native host bridge and endpoint
   driver reviewer (Manivannan Sadhasivam)

 - Disable MHI RAM data parity error interrupt for qcom SA8775P SoC to
   work around hardware erratum that causes a constant stream of
   interrupts (Manivannan Sadhasivam)

 - Don't try to fall back to qcom Operating Performance Points (OPP)
   support unless the platform actually supports OPP (Manivannan
   Sadhasivam)

 - Add imx@lists.linux.dev mailing list to MAINTAINERS for NXP
   layerscape and imx6 PCI controller drivers (Frank Li)

* tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: PCI: Add NXP PCI controller mailing list imx@lists.linux.dev
  PCI: qcom: Use OPP only if the platform supports it
  PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoC
  MAINTAINERS: Add Manivannan Sadhasivam as Reviewer for PCI native host bridge and endpoint drivers

Pull block fix from Jens Axboe:
 "Fix for a single regression for WRITE_SAME introduced in the 6.11
  merge window"

* tag 'block-6.11-20240830' of git://git.kernel.dk/linux:
  block: fix detection of unsupported WRITE SAME in blkdev_issue_write_zeroes

Pull io_uring fixes from Jens Axboe:

 - A fix for a regression that happened in 6.11 merge window, where the
   copying of iovecs for compat mode applications got broken for certain
   cases.

 - Fix for a bug introduced in 6.10, where if using recv/send bundles
   with classic provided buffers, the recv/send would fail to set the
   right iovec count. This caused 0 byte send/recv results. Found via
   code coverage testing and writing a test case to exercise it.

* tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux:
  io_uring/kbuf: return correct iovec count from classic buffer peek
  io_uring/rsrc: ensure compat iovecs are copied correctly

Merge tag 'at91-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes

Microchip AT91 fixes for v6.11

It contains:
- DTS directory update to match all entries not only those starting with
  at91 or sama

Pull lsm fix from Paul Moore:
 "One small patch to correct a NFS permissions problem with SELinux and
  Smack"

* tag 'lsm-pr-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  selinux,smack: don't bypass permissions check in inode_setsecctx hook

Pull power management fixes from Rafael Wysocki:
 "These fix three issues in the amd-pstate cpufreq driver.

  Specifics:

   - Remove checks for highest performance match on preferred cores when
     updating preferred core ranking in amd-pstate (Mario Limonciello)

   - Make amd-pstate call topology_logical_package_id() instead of
     logical_die_id() to get a socked ID for a CPU (Gautham Shenoy)

   - Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan
     Carpenter)"

* tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
  cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
  cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()

Pull dmaengine fixes from Vinod Koul:

 - A bunch of dw driver changes to fix the src/dst addr width config

 - Omap driver fix for sglen initialization

 - stm32-dma3 driver lli_size init fix

 - dw edma driver fixes for watermark interrupts and unmasking STOP and
   ABORT interrupts

* tag 'dmaengine-fix-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: dw-edma: Do not enable watermark interrupts for HDMA
  dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA
  dmaengine: stm32-dma3: Set lli_size after allocation
  dmaengine: ti: omap-dma: Initialize sglen after allocation
  dmaengine: dw: Unify ret-val local variables naming
  dmaengine: dw: Simplify max-burst calculation procedure
  dmaengine: dw: Define encode_maxburst() above prepare_ctllo() callbacks
  dmaengine: dw: Simplify prepare CTL_LO methods
  dmaengine: dw: Add memory bus width verification
  dmaengine: dw: Add peripheral bus width verification

Pull phy fixes from Vinod Koul:

 - Qualcomm QMP X1E80100 PCIe Gen4 PHY initialisation fix

 - Freescale imx8mq tuning parameter name fix

 - Samsung exynos5 fir for error code in probe()

 - Xilinx Zynqmp SGMII linkup failure fix

* tag 'phy-fixes-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume
  phy: exynos5-usbdrd: fix error code in probe()
  phy: fsl-imx8mq-usb: fix tuning parameter name
  phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation

Pull soundwire fix from Vinod Koul:

 - Single fix for non-continous port map programming

* tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: stream: fix programming slave ports for non-continous port maps

Pull iommu fixes from Joerg Roedel:

 - Fix a device-stall problem in bad io-page-fault setups (faults
   received from devices with no supporting domain attached).

 - Context flush fix for Intel VT-d.

 - Do not allow non-read+non-write mapping through iommufd as most
   implementations can not handle that.

 - Fix a possible infinite-loop issue in map_pages() path.

 - Add Jean-Philippe as reviewer for SMMUv3 SVA support

* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
  MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
  iommu: Do not return 0 from map_pages if it doesn't do anything
  iommufd: Do not allow creating areas without READ or WRITE
  iommu/vt-d: Fix incorrect domain ID in context flush helper
  iommu: Handle iommu faults for a bad iopf setup

Add imx mailing list imx@lists.linux.dev for PCI controller of NXP chips
(Layerscape and iMX).

Link: https://lore.kernel.org/r/20240826202740.970015-1-Frank.Li@nxp.comSigned-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>

io_provided_buffers_select() returns 0 to indicate success, but it should
be returning 1 to indicate that 1 vec was mapped. This causes peeking
to fail with classic provided buffers, and while that's not a use case
that anyone should use, it should still work correctly.

The end result is that no buffer will be selected, and hence a completion
with '0' as the result will be posted, without a buffer attached.

Fixes: 35c8711c ("io_uring/kbuf: add helpers for getting/peeking multiple buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It is not safe to dereference fl->c.flc_owner without first confirming
fl->fl_lmops is the expected manager.  nfsd4_deleg_getattr_conflict()
tests fl_lmops but largely ignores the result and assumes that flc_owner
is an nfs4_delegation anyway.  This is wrong.

With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave
as it did before the change mentioned below.  This is the same as the
current code, but without any reference to a possible delegation.

Fixes: c5967721 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

For buffer registration (or updates), a userspace iovec is copied in
and updated. If the application is within a compat syscall, then the
iovec type is compat_iovec rather than iovec. However, the type used
in __io_sqe_buffers_update() and io_sqe_buffers_register() is always
struct iovec, and hence the source is incremented by the size of a
non-compat iovec in the loop. This misses every other iovec in the
source, and will run into garbage half way through the copies and
return -EFAULT to the application.

Maintain the source address separately and assign to our user vec
pointer, so that copies always happen from the right source address.

While in there, correct a bad placement of __user which triggered
the following sparse warning prior to this fix:

io_uring/rsrc.c:981:33: warning: cast removes address space '__user' of expression
io_uring/rsrc.c:981:30: warning: incorrect type in assignment (different address spaces)
io_uring/rsrc.c:981:30:    expected struct iovec const [noderef] __user *uvec
io_uring/rsrc.c:981:30:    got struct iovec *[noderef] __user

Fixes: f4eaf8ed ("io_uring/rsrc: Drop io_copy_iov in favor of iovec API")
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial device id for 6.11-rc6

Here's a new modem device id.

This one has been in linux-next with no reported issues.

* tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add MeiG Smart SRM825L

Pull drm fixes from Dave Airlie:
 "Another week, another set of GPU fixes. amdgpu and vmwgfx leading the
  charge, then i915 and xe changes along with v3d and some other bits.
  The TTM revert is due to some stuttering graphical apps probably due
  to longer stalls while prefaulting.

  Seems pretty much where I'd expect things,

  ttm:
   - revert prefault change, caused stutters

  aperture:
   - handle non-VGA devices bettter

  amdgpu:
   - SWSMU gaming stability fix
   - SMU 13.0.7 fix
   - SWSMU documentation alignment fix
   - SMU 14.0.x fixes
   - GC 12.x fix
   - Display fix
   - IP discovery fix
   - SMU 13.0.6 fix

  i915:
   - Fix #11195: The external display connect via USB type-C dock stays
     blank after re-connect the dock
   - Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
   - Move ARL GuC firmware to correct version

  xe:
   - Invalidate media_gt TLBs
   - Fix HWMON i1 power setup write command

  vmwgfx:
   - prevent unmapping active read buffers
   - fix prime with external buffers
   - disable coherent dumb buffers without 3d

  v3d:
   - disable preemption while updating GPU stats"

* tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel:
  drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16
  drm/v3d: Disable preemption while updating GPU stats
  drm/amd/pm: Drop unsupported features on smu v14_0_2
  drm/amd/pm: Add support for new P2S table revision
  drm/amdgpu: support for gc_info table v1.3
  drm/amd/display: avoid using null object of framebuffer
  drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDs
  drm/amd/pm: update message interface for smu v14.0.2/3
  drm/amdgpu/swsmu: always force a state reprogram on init
  drm/amdgpu/smu13.0.7: print index for profiles
  drm/amdgpu: align pp_power_profile_mode with kernel docs
  drm/i915/dp_mst: Fix MST state after a sink reset
  drm/xe: Invalidate media_gt TLBs
  drm/i915: ARL requires a newer GSC firmware
  drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
  video/aperture: optionally match the device in sysfb_disable()
  drm/vmwgfx: Disable coherent dumb buffers without 3d
  drm/vmwgfx: Fix prime with external buffers
  drm/vmwgfx: Prevent unmapping active read buffers
  Revert "drm/ttm: increase ttm pre-fault value to PMD size"

Merge tag 'drm-misc-fixes-2024-08-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat

- Invalidate media_gt TLBs (Brost)
- Fix HWMON i1 power setup write command (Karthik)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtB-t5f4uXMrKgnV@intel.com

Pull execve fix from Kees Cook:

 - binfmt_elf_fdpic: fix AUXV size with ELF_HWCAP2 (Max Filippov)

* tag 'execve-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  binfmt_elf_fdpic: fix AUXV size calculation when ELF_HWCAP2 is defined

The runtime constant feature removes all the users of these variables,
allowing the compiler to optimize them away.  It's quite difficult to
extract their values from the kernel text, and the memory saved by
removing them is tiny, and it was never the point of this optimization.

Since the dentry_hashtable is a core data structure, it's valuable for
debugging tools to be able to read it easily.  For instance, scripts
built on drgn, like the dentrycache script[1], rely on it to be able to
perform diagnostics on the contents of the dcache.  Annotate it as used,
so the compiler doesn't discard it.

Link: https://github.com/oracle-samples/drgn-tools/blob/3afc56146f54d09dfd1f6d3c1b7436eda7e638be/drgn_tools/dentry.py#L325-L355 [1]
Fixes: e3c92e81 ("runtime constants: add x86 architecture support")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>