- 07 Mar, 2016 40 commits
-
-
Mathias Krause authored
commit 63e41ebc upstream. We miss to take the crypto_alg_sem semaphore when traversing the crypto_alg_list for CRYPTO_MSG_GETALG dumps. This allows a race with crypto_unregister_alg() removing algorithms from the list while we're still traversing it, thereby leading to a use-after-free as show below: [ 3482.071639] general protection fault: 0000 [#1] SMP [ 3482.075639] Modules linked in: aes_x86_64 glue_helper lrw ablk_helper cryptd gf128mul ipv6 pcspkr serio_raw virtio_net microcode virtio_pci virtio_ring virtio sr_mod cdrom [last unloaded: aesni_intel] [ 3482.075639] CPU: 1 PID: 11065 Comm: crconf Not tainted 4.3.4-grsec+ #126 [ 3482.075639] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 3482.075639] task: ffff88001cd41a40 ti: ffff88001cd422c8 task.ti: ffff88001cd422c8 [ 3482.075639] RIP: 0010:[<ffffffff93722bd3>] [<ffffffff93722bd3>] strncpy+0x13/0x30 [ 3482.075639] RSP: 0018:ffff88001f713b60 EFLAGS: 00010202 [ 3482.075639] RAX: ffff88001f6c4430 RBX: ffff88001f6c43a0 RCX: ffff88001f6c4430 [ 3482.075639] RDX: 0000000000000040 RSI: fefefefefefeff16 RDI: ffff88001f6c4430 [ 3482.075639] RBP: ffff88001f713b60 R08: ffff88001f6c4470 R09: ffff88001f6c4480 [ 3482.075639] R10: 0000000000000002 R11: 0000000000000246 R12: ffff88001ce2aa28 [ 3482.075639] R13: ffff880000093700 R14: ffff88001f5e4bf8 R15: 0000000000003b20 [ 3482.075639] FS: 0000033826fa2700(0000) GS:ffff88001e900000(0000) knlGS:0000000000000000 [ 3482.075639] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3482.075639] CR2: ffffffffff600400 CR3: 00000000139ec000 CR4: 00000000001606f0 [ 3482.075639] Stack: [ 3482.075639] ffff88001f713bd8 ffffffff936ccd00 ffff88001e5c4200 ffff880000093700 [ 3482.075639] ffff88001f713bd0 ffffffff938ef4bf 0000000000000000 0000000000003b20 [ 3482.075639] ffff88001f5e4bf8 ffff88001f5e4848 0000000000000000 0000000000003b20 [ 3482.075639] Call Trace: [ 3482.075639] [<ffffffff936ccd00>] crypto_report_alg+0xc0/0x3e0 [ 3482.075639] [<ffffffff938ef4bf>] ? __alloc_skb+0x16f/0x300 [ 3482.075639] [<ffffffff936cd08a>] crypto_dump_report+0x6a/0x90 [ 3482.075639] [<ffffffff93935707>] netlink_dump+0x147/0x2e0 [ 3482.075639] [<ffffffff93935f99>] __netlink_dump_start+0x159/0x190 [ 3482.075639] [<ffffffff936ccb13>] crypto_user_rcv_msg+0xc3/0x130 [ 3482.075639] [<ffffffff936cd020>] ? crypto_report_alg+0x3e0/0x3e0 [ 3482.075639] [<ffffffff936cc4b0>] ? alg_test_crc32c+0x120/0x120 [ 3482.075639] [<ffffffff93933145>] ? __netlink_lookup+0xd5/0x120 [ 3482.075639] [<ffffffff936cca50>] ? crypto_add_alg+0x1d0/0x1d0 [ 3482.075639] [<ffffffff93938141>] netlink_rcv_skb+0xe1/0x130 [ 3482.075639] [<ffffffff936cc4f8>] crypto_netlink_rcv+0x28/0x40 [ 3482.075639] [<ffffffff939375a8>] netlink_unicast+0x108/0x180 [ 3482.075639] [<ffffffff93937c21>] netlink_sendmsg+0x541/0x770 [ 3482.075639] [<ffffffff938e31e1>] sock_sendmsg+0x21/0x40 [ 3482.075639] [<ffffffff938e4763>] SyS_sendto+0xf3/0x130 [ 3482.075639] [<ffffffff93444203>] ? bad_area_nosemaphore+0x13/0x20 [ 3482.075639] [<ffffffff93444470>] ? __do_page_fault+0x80/0x3a0 [ 3482.075639] [<ffffffff939d80cb>] entry_SYSCALL_64_fastpath+0x12/0x6e [ 3482.075639] Code: 88 4a ff 75 ed 5d 48 0f ba 2c 24 3f c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 85 d2 48 89 f8 48 89 f9 4c 8d 04 17 48 89 e5 74 15 <0f> b6 16 80 fa 01 88 11 48 83 de ff 48 83 c1 01 4c 39 c1 75 eb [ 3482.075639] RIP [<ffffffff93722bd3>] strncpy+0x13/0x30 To trigger the race run the following loops simultaneously for a while: $ while : ; do modprobe aesni-intel; rmmod aesni-intel; done $ while : ; do crconf show all > /dev/null; done Fix the race by taking the crypto_alg_sem read lock, thereby preventing crypto_unregister_alg() from modifying the algorithm list during the dump. This bug has been detected by the PaX memory sanitize feature. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: PaX Team <pageexec@freemail.hu> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Konstantin Khlebnikov authored
commit 73204282 upstream. Helper radix_tree_iter_retry() resets next_index to the current index. In following radix_tree_next_slot current chunk size becomes zero. This isn't checked and it tries to dereference null pointer in slot. Tagged iterator is fine because retry happens only at slot 0 where tag bitmask in iter->tags is filled with single bit. Fixes: 46437f9a ("radix-tree: fix race in gang lookup") Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 12352d3c upstream. Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if anon_vma appeared between lock and unlock. We have to check anon_vma first or call anon_vma_prepare() to be sure that it's here. There are only few users of these legacy helpers. Let's get rid of them. This patch fixes anon_vma lock imbalance in validate_mm(). Write lock isn't required here, read lock is enough. And reorders expand_downwards/expand_upwards: security_mmap_addr() and wrapping-around check don't have to be under anon vma lock. Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
xuejiufei authored
commit c95a5180 upstream. When recovery master down, dlm_do_local_recovery_cleanup() only remove the $RECOVERY lock owned by dead node, but do not clear the refmap bit. Which will make umount thread falling in dead loop migrating $RECOVERY to the dead node. Signed-off-by:
xuejiufei <xuejiufei@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Tetsuo Handa authored
commit 564e81a5 upstream. Jan Stancek has reported that system occasionally hanging after "oom01" testcase from LTP triggers OOM. Guessing from a result that there is a kworker thread doing memory allocation and the values between "Node 0 Normal free:" and "Node 0 Normal:" differs when hanging, vmstat is not up-to-date for some reason. According to commit 373ccbe5 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress"), it meant to force the kworker thread to take a short sleep, but it by error used schedule_timeout(1). We missed that schedule_timeout() in state TASK_RUNNING doesn't do anything. Fix it by using schedule_timeout_uninterruptible(1) which forces the kworker thread to take a short sleep in order to make sure that vmstat is up-to-date. Fixes: 373ccbe5 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Jan Stancek <jstancek@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Cristopher Lameter <clameter@sgi.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by:
-
Eric Dumazet authored
commit d7ce3692 upstream. Some servers experienced fatal deadlocks because of a combination of bugs, leading to multiple cpus calling dump_stack(). The checksumming bug was fixed in commit 34ae6a1a ("ipv6: update skb->csum when CE mark is propagated"). The second problem is a faulty locking in dump_stack() CPU1 runs in process context and calls dump_stack(), grabs dump_lock. CPU2 receives a TCP packet under softirq, grabs socket spinlock, and call dump_stack() from netdev_rx_csum_fault(). dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since dump_lock is owned by CPU1 While dumping its stack, CPU1 is interrupted by a softirq, and happens to process a packet for the TCP socket locked by CPU2. CPU1 spins forever in spin_lock() : deadlock Stack trace on CPU1 looked like : NMI backtrace for cpu 1 RIP: _raw_spin_lock+0x25/0x30 ... Call Trace: <IRQ> tcp_v6_rcv+0x243/0x620 ip6_input_finish+0x11f/0x330 ip6_input+0x38/0x40 ip6_rcv_finish+0x3c/0x90 ipv6_rcv+0x2a9/0x500 process_backlog+0x461/0xaa0 net_rx_action+0x147/0x430 __do_softirq+0x167/0x2d0 call_softirq+0x1c/0x30 do_softirq+0x3f/0x80 irq_exit+0x6e/0xc0 smp_call_function_single_interrupt+0x35/0x40 call_function_single_interrupt+0x6a/0x70 <EOI> printk+0x4d/0x4f printk_address+0x31/0x33 print_trace_address+0x33/0x3c print_context_stack+0x7f/0x119 dump_trace+0x26b/0x28e show_trace_log_lvl+0x4f/0x5c show_stack_log_lvl+0x104/0x113 show_stack+0x42/0x44 dump_stack+0x46/0x58 netdev_rx_csum_fault+0x38/0x3c __skb_checksum_complete_head+0x6e/0x80 __skb_checksum_complete+0x11/0x20 tcp_rcv_established+0x2bd5/0x2fd0 tcp_v6_do_rcv+0x13c/0x620 sk_backlog_rcv+0x15/0x30 release_sock+0xd2/0x150 tcp_recvmsg+0x1c1/0xfc0 inet_recvmsg+0x7d/0x90 sock_recvmsg+0xaf/0xe0 ___sys_recvmsg+0x111/0x3b0 SyS_recvmsg+0x5c/0xb0 system_call_fastpath+0x16/0x1b Fixes: b58d9774 ("dump_stack: serialize the output from dump_stack()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Alex Thorlton <athorlton@sgi.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 0f4a9431 upstream. To address the bug where fabric driver level shutdown of se_cmd occurs at the same time when TMR CMD_T_ABORTED is happening resulting in a -1 ->cmd_kref, this patch adds a CMD_T_FABRIC_STOP bit that is used to determine when TMR + driver I_T nexus shutdown is happening concurrently. It changes target_sess_cmd_list_set_waiting() to obtain se_cmd->cmd_kref + set CMD_T_FABRIC_STOP, and drop local reference in target_wait_for_sess_cmds() and invoke extra target_put_sess_cmd() during Task Aborted Status (TAS) when necessary. Also, it adds a new target_wait_free_cmd() wrapper around transport_wait_for_tasks() for the special case within transport_generic_free_cmd() to set CMD_T_FABRIC_STOP, and is now aware of CMD_T_ABORTED + CMD_T_TAS status bits to know when an extra transport_put_cmd() during TAS is required. Note transport_generic_free_cmd() is expected to block on cmd->cmd_wait_comp in order to follow what iscsi-target expects during iscsi_conn context se_cmd shutdown. Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@daterainc.com> Signed-off-by:
-
Takashi Iwai authored
commit 6c361d10 upstream. This reverts commit 0c25ad80. The original commit disabled the aamixer path due to the noise problem, but it turned out that some mobo with the same PCI SSID doesn't suffer from the issue, and the disabled function (analog loopback) is still demanded by users. Since the recent commit [e7fdd527: ALSA: hda - Implement loopback control switch for Realtek and other codecs], we have the dynamic mixer switch to enable/disable the aamix path, and we don't have to disable the path statically any longer. So, let's revert the disablement, so that only the user suffering from the noise problem can turn off the aamix on the fly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=108301 Reported-by: <mutedbytes@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Henningsson authored
commit 360a8245 upstream. The static checker warning is: sound/pci/hda/patch_hdmi.c:460 hdmi_eld_ctl_get() error: __memcpy() 'eld->eld_buffer' too small (256 vs 512) I have a hard time figuring out if this can ever cause an information leak (I don't think so), but nonetheless it does not hurt to increase the robustness of the code. Fixes: 68e03de9 ('ALSA: hda - hdmi: Do not expose eld data when eld is invalid') Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Mykola Lysenko authored
commit 91a25e46 upstream. This is needed to properly deallocate port payload after downstream branch get unplugged. In order to do this unplugged MST topology should be preserved, to find first alive port on path to unplugged MST topology, and send payload deallocation request to branch device of found port. For this mstb and port kref's are used in reversed order to track when port and branch memory could be freed. Added additional functions to find appropriate mstb as described above. Signed-off-by:
Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Andrey Grodzovsky authored
commit c175cd16 upstream. On DELL U3014 if you clear the table before enabling MST it sometimes hangs the receiver. Signed-off-by:
Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Harry Wentland authored
commit a9ebb3e4 upstream. Our PBN value overflows the 20 bits integer part of the 20.12 fixed point. We need to use 31.32 fixed point to avoid this. This happens with display clocks larger than 293122 (at 24 bpp), which we see with the Sharp (and similar) 4k tiled displays. Signed-off-by:
-
Harry Wentland authored
commit 64566b5e upstream. drm_fixp_from_fraction allows us to create a fixed point directly from a fraction, rather than creating fixed point values and dividing later. This avoids overflow of our 64 bit value for large numbers. drm_fixp2int_ceil allows us to return the ceiling of our fixed point value. [airlied: squash Jordan's fix] 32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com> Signed-off-by:
-
Insu Yun authored
commit dabe1954 upstream. In drm_dp_mst_allocate_vcpi, it returns true in two paths, but in one path, there is no reference couting decrease. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Signed-off-by:
-
Mika Westerberg authored
commit 82c43310 upstream. I have a Marvell 88SE9230 SATA Controller that has some sort of integrated console SCSI device attached to one of the ports. ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 ata14.00: configured for UDMA/66 scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 Sending it VPD INQUIRY command seem to always fail with following error: ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link This has been minor annoyance (only error printed on dmesg) until commit 09e2b0b1 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd() in scsi_rescan_device(). The commit causes the system to splat out following errors continuously without ever reaching the UI: ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) Without in-depth understanding of SCSI layer and the Marvell controller, I suspect this happens because when the link goes down (because of an error) we schedule scsi_rescan_device() which again fails to read VPD data... ad infinitum. Since VPD data cannot be read from the device anyway we prevent the SCSI layer from even trying by blacklisting the device. This gets away the error and the system starts up normally. [mkp: Widened the match to all revisions of this device] Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Hannes Reinecke authored
commit d2d06d4f upstream. If MODE SELECT returns with sense '05/91/36' (command lock violation) it should always be retried without counting the number of retries. During an HBA upgrade or similar circumstances one might see a flood of MODE SELECT command from various HBAs, which will easily trigger the sense code and exceed the retry count. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Filipe Manana authored
commit 0c0fe3b0 upstream. While doing some tests I ran into an hang on an extent buffer's rwlock that produced the following trace: [39389.800012] NMI watchdog: BUG: soft lockup - CPU#15 stuck for 22s! [fdm-stress:32166] [39389.800016] NMI watchdog: BUG: soft lockup - CPU#14 stuck for 22s! [fdm-stress:32165] [39389.800016] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800016] irq event stamp: 0 [39389.800016] hardirqs last enabled at (0): [< (null)>] (null) [39389.800016] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last disabled at (0): [< (null)>] (null) [39389.800016] CPU: 14 PID: 32165 Comm: fdm-stress Not tainted 4.4.0-rc6-btrfs-next-18+ #1 [39389.800016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800016] task: ffff880175b1ca40 ti: ffff8800a185c000 task.ti: ffff8800a185c000 [39389.800016] RIP: 0010:[<ffffffff810902af>] [<ffffffff810902af>] queued_spin_lock_slowpath+0x57/0x158 [39389.800016] RSP: 0018:ffff8800a185fb80 EFLAGS: 00000202 [39389.800016] RAX: 0000000000000101 RBX: ffff8801710c4e9c RCX: 0000000000000101 [39389.800016] RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000001 [39389.800016] RBP: ffff8800a185fb98 R08: 0000000000000001 R09: 0000000000000000 [39389.800016] R10: ffff8800a185fb68 R11: 6db6db6db6db6db7 R12: ffff8801710c4e98 [39389.800016] R13: ffff880175b1ca40 R14: ffff8800a185fc10 R15: ffff880175b1ca40 [39389.800016] FS: 00007f6d37fff700(0000) GS:ffff8802be9c0000(0000) knlGS:0000000000000000 [39389.800016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800016] CR2: 00007f6d300019b8 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800016] Stack: [39389.800016] ffff8801710c4e98 ffff8801710c4e98 ffff880175b1ca40 ffff8800a185fbb0 [39389.800016] ffffffff81091e11 ffff8801710c4e98 ffff8800a185fbc8 ffffffff81091895 [39389.800016] ffff8801710c4e98 ffff8800a185fbe8 ffffffff81486c5c ffffffffa067288c [39389.800016] Call Trace: [39389.800016] [<ffffffff81091e11>] queued_read_lock_slowpath+0x46/0x60 [39389.800016] [<ffffffff81091895>] do_raw_read_lock+0x3e/0x41 [39389.800016] [<ffffffff81486c5c>] _raw_read_lock+0x3d/0x44 [39389.800016] [<ffffffffa067288c>] ? btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa067288c>] btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa0622ced>] ? btrfs_find_item+0xa7/0xd2 [btrfs] [39389.800016] [<ffffffffa069363f>] btrfs_ref_to_path+0xd6/0x174 [btrfs] [39389.800016] [<ffffffffa0693730>] inode_to_path+0x53/0xa2 [btrfs] [39389.800016] [<ffffffffa0693e2e>] paths_from_inode+0x117/0x2ec [btrfs] [39389.800016] [<ffffffffa0670cff>] btrfs_ioctl+0xd5b/0x2793 [btrfs] [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff81276727>] ? __this_cpu_preempt_check+0x13/0x15 [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800016] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800016] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800016] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800016] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800016] Code: b9 01 01 00 00 f7 c6 00 ff ff ff 75 32 83 fe 01 89 ca 89 f0 0f 45 d7 f0 0f b1 13 39 f0 74 04 89 c6 eb e2 ff ca 0f 84 fa 00 00 00 <8b> 03 84 c0 74 04 f3 90 eb f6 66 c7 03 01 00 e9 e6 00 00 00 e8 [39389.800012] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800012] irq event stamp: 0 [39389.800012] hardirqs last enabled at (0): [< (null)>] (null) [39389.800012] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last disabled at (0): [< (null)>] (null) [39389.800012] CPU: 15 PID: 32166 Comm: fdm-stress Tainted: G L 4.4.0-rc6-btrfs-next-18+ #1 [39389.800012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800012] task: ffff880179294380 ti: ffff880034a60000 task.ti: ffff880034a60000 [39389.800012] RIP: 0010:[<ffffffff81091e8d>] [<ffffffff81091e8d>] queued_write_lock_slowpath+0x62/0x72 [39389.800012] RSP: 0018:ffff880034a639f0 EFLAGS: 00000206 [39389.800012] RAX: 0000000000000101 RBX: ffff8801710c4e98 RCX: 0000000000000000 [39389.800012] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffff8801710c4e9c [39389.800012] RBP: ffff880034a639f8 R08: 0000000000000001 R09: 0000000000000000 [39389.800012] R10: ffff880034a639b0 R11: 0000000000001000 R12: ffff8801710c4e98 [39389.800012] R13: 0000000000000001 R14: ffff880172cbc000 R15: ffff8801710c4e00 [39389.800012] FS: 00007f6d377fe700(0000) GS:ffff8802be9e0000(0000) knlGS:0000000000000000 [39389.800012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800012] CR2: 00007f6d3d3c1000 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800012] Stack: [39389.800012] ffff8801710c4e98 ffff880034a63a10 ffffffff81091963 ffff8801710c4e98 [39389.800012] ffff880034a63a30 ffffffff81486f1b ffffffffa0672cb3 ffff8801710c4e00 [39389.800012] ffff880034a63a78 ffffffffa0672cb3 ffff8801710c4e00 ffff880034a63a58 [39389.800012] Call Trace: [39389.800012] [<ffffffff81091963>] do_raw_write_lock+0x72/0x8c [39389.800012] [<ffffffff81486f1b>] _raw_write_lock+0x3a/0x41 [39389.800012] [<ffffffffa0672cb3>] ? btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa0672cb3>] btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa061aeba>] ? rcu_read_unlock+0x5b/0x5d [btrfs] [39389.800012] [<ffffffffa061ce13>] ? btrfs_root_node+0xda/0xe6 [btrfs] [39389.800012] [<ffffffffa061ce83>] btrfs_lock_root_node+0x22/0x42 [btrfs] [39389.800012] [<ffffffffa062046b>] btrfs_search_slot+0x1b8/0x758 [btrfs] [39389.800012] [<ffffffff810fc6b0>] ? time_hardirqs_on+0x15/0x28 [39389.800012] [<ffffffffa06365db>] btrfs_lookup_inode+0x31/0x95 [btrfs] [39389.800012] [<ffffffff8108d62f>] ? trace_hardirqs_on+0xd/0xf [39389.800012] [<ffffffff8148482b>] ? mutex_lock_nested+0x397/0x3bc [39389.800012] [<ffffffffa068821b>] __btrfs_update_delayed_inode+0x59/0x1c0 [btrfs] [39389.800012] [<ffffffffa068858e>] __btrfs_commit_inode_delayed_items+0x194/0x5aa [btrfs] [39389.800012] [<ffffffff81486ab7>] ? _raw_spin_unlock+0x31/0x44 [39389.800012] [<ffffffffa0688a48>] __btrfs_run_delayed_items+0xa4/0x15c [btrfs] [39389.800012] [<ffffffffa0688d62>] btrfs_run_delayed_items+0x11/0x13 [btrfs] [39389.800012] [<ffffffffa064048e>] btrfs_commit_transaction+0x234/0x96e [btrfs] [39389.800012] [<ffffffffa0618d10>] btrfs_sync_fs+0x145/0x1ad [btrfs] [39389.800012] [<ffffffffa0671176>] btrfs_ioctl+0x11d2/0x2793 [btrfs] [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800012] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800012] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800012] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800012] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800012] Code: f0 0f b1 13 85 c0 75 ef eb 2a f3 90 8a 03 84 c0 75 f8 f0 0f b0 13 84 c0 75 f0 ba ff 00 00 00 eb 0a f0 0f b1 13 ff c8 74 0b f3 90 <8b> 03 83 f8 01 75 f7 eb ed c6 43 04 00 5b 5d c3 0f 1f 44 00 00 This happens because in the code path executed by the inode_paths ioctl we end up nesting two calls to read lock a leaf's rwlock when after the first call to read_lock() and before the second call to read_lock(), another task (running the delayed items as part of a transaction commit) has already called write_lock() against the leaf's rwlock. This situation is illustrated by the following diagram: Task A Task B btrfs_ref_to_path() btrfs_commit_transaction() read_lock(&eb->lock); btrfs_run_delayed_items() __btrfs_commit_inode_delayed_items() __btrfs_update_delayed_inode() btrfs_lookup_inode() write_lock(&eb->lock); --> task waits for lock read_lock(&eb->lock); --> makes this task hang forever (and task B too of course) So fix this by avoiding doing the nested read lock, which is easily avoidable. This issue does not happen if task B calls write_lock() after task A does the second call to read_lock(), however there does not seem to exist anything in the documentation that mentions what is the expected behaviour for recursive locking of rwlocks (leaving the idea that doing so is not a good usage of rwlocks). Also, as a side effect necessary for this fix, make sure we do not needlessly read lock extent buffers when the input path has skip_locking set (used when called from send). Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Linus Walleij authored
commit 418d5516 upstream. The DTSI file for the Nomadik does not properly specify how the PL180 levelshifter is connected: the Nomadik actually needs all the five st,sig-dir-* flags set to properly control all lines out. Further this board supports full power cycling of the card, and since this variant has no hardware clock gating, it needs a ridiculously low frequency setting to keep up with the ever overflowing FIFO. The pin configuration set-up is a bit of a mystery, because of course these pins are a mix of inputs and outputs. However the reference implementation sets all pins to "output" with unspecified initial value, so let's do that here as well. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit ac75fe5d upstream. That prevents this bug: [ 2382.269496] BUG: unable to handle kernel NULL pointer dereference at 0000000000000540 [ 2382.270013] IP: [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] PGD 0 [ 2382.270013] Oops: 0002 [#1] SMP [ 2382.270013] Modules linked in: saa7134_alsa(-) tda1004x saa7134_dvb videobuf2_dvb dvb_core tda827x tda8290 tuner saa7134 tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc tun bridge stp llc ebtables ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack it87 hwmon_vid snd_hda_codec_idt snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq pcspkr i2c_i801 snd_seq_device snd_pcm snd_timer lpc_ich snd mfd_core soundcore binfmt_misc i915 video i2c_algo_bit drm_kms_helper drm r8169 ata_generic serio_raw pata_acpi mii i2c_core [last unloaded: videobuf2_memops] [ 2382.270013] CPU: 0 PID: 4899 Comm: rmmod Not tainted 4.5.0-rc1+ #4 [ 2382.270013] Hardware name: PCCHIPS P17G/P17G, BIOS 080012 05/14/2008 [ 2382.270013] task: ffff880039c38000 ti: ffff88003c764000 task.ti: ffff88003c764000 [ 2382.270013] RIP: 0010:[<ffffffffa01fe616>] [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP: 0018:ffff88003c767ea0 EFLAGS: 00010286 [ 2382.270013] RAX: ffff88003c767eb8 RBX: 0000000000000000 RCX: 0000000000006260 [ 2382.270013] RDX: ffffffffa020a060 RSI: ffffffffa0206de1 RDI: ffff88003c767eb0 [ 2382.270013] RBP: ffff88003c767ed8 R08: 0000000000019960 R09: ffffffff811a5412 [ 2382.270013] R10: ffffea0000d7c200 R11: 0000000000000000 R12: ffff88003c767ea8 [ 2382.270013] R13: 00007ffe760617f7 R14: 0000000000000000 R15: 0000557625d7f1e0 [ 2382.270013] FS: 00007f80bb1c0700(0000) GS:ffff88003f400000(0000) knlGS:0000000000000000 [ 2382.270013] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2382.270013] CR2: 0000000000000540 CR3: 000000003c00f000 CR4: 00000000000006f0 [ 2382.270013] Stack: [ 2382.270013] 000000003c767ed8 ffffffff00000000 ffff880000000000 ffff88003c767eb8 [ 2382.270013] ffff88003c767eb8 ffffffffa049a890 00007ffe76060060 ffff88003c767ef0 [ 2382.270013] ffffffffa049889d ffffffffa049a500 ffff88003c767f48 ffffffff8111079c [ 2382.270013] Call Trace: [ 2382.270013] [<ffffffffa049889d>] saa7134_alsa_exit+0x1d/0x780 [saa7134_alsa] [ 2382.270013] [<ffffffff8111079c>] SyS_delete_module+0x19c/0x1f0 [ 2382.270013] [<ffffffff8170fc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 2382.270013] Code: 20 a0 48 c7 c6 e1 6d 20 a0 48 89 e5 41 54 53 4c 8d 65 d0 48 89 fb 48 83 ec 28 c7 45 d0 00 00 00 00 49 8d 7c 24 08 e8 7a 55 ed e0 <4c> 89 a3 40 05 00 00 48 89 df e8 eb fd ff ff 85 c0 75 1a 48 8d [ 2382.270013] RIP [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP <ffff88003c767ea0> [ 2382.270013] CR2: 0000000000000540 Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Takashi Iwai authored
commit 094fd3be upstream. In ALSA timer core, the active timer instance is managed in active_list linked list. Each element is added / removed dynamically at timer start, stop and in timer interrupt. The problem is that snd_timer_interrupt() has a thinko and leaves the element in active_list when it's the last opened element. This eventually leads to list corruption or use-after-free error. This hasn't been revealed because we used to delete the list forcibly in snd_timer_stop() in the past. However, the recent fix avoids the double-stop behavior (in commit [f784beb7: ALSA: timer: Fix link corruption due to double start or stop]), and this leak hits reality. This patch fixes the link management in snd_timer_interrupt(). Now it simply unlinks no matter which stream is. BugLink: http://lkml.kernel.org/r/CACT4Y+Yy2aukHP-EDp8-ziNqNNmb-NTf=jDWXMP7jB8HDa2vng@mail.gmail.comReported-by:
-
Mauro Carvalho Chehab authored
commit e8beb023 upstream. The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Signed-off-by:
-
Nicholas Bellinger authored
commit ebde1ca5 upstream. This patch fixes a bug in TMR task aborted status (TAS) handling when multiple sessions are connected to the same target WWPN endpoint and se_node_acl descriptor, resulting in TASK_ABORTED status to not be generated for aborted se_cmds on the remote port. This is due to core_tmr_handle_tas_abort() incorrectly comparing se_node_acl instead of se_session, for which the multi-session case is expected to be sharing the same se_node_acl. Instead, go ahead and update core_tmr_handle_tas_abort() to compare tmr_sess + cmd->se_sess in order to determine if the LUN_RESET was received on a different I_T nexus, and TASK_ABORTED status response needs to be generated. Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit a6d9bb1c upstream. This patch fixes a NULL pointer se_cmd->cmd_kref < 0 refcount bug during TMR LUN_RESET with active TMRs, triggered during se_cmd + se_tmr_req descriptor shutdown + release via core_tmr_drain_tmr_list(). To address this bug, go ahead and obtain a local kref_get_unless_zero(&se_cmd->cmd_kref) for active I/O to set CMD_T_ABORTED, and transport_wait_for_tasks() followed by the final target_put_sess_cmd() to drop the local ->cmd_kref. Also add two new checks within target_tmr_work() to avoid CMD_T_ABORTED -> TFO->queue_tm_rsp() callbacks ahead of invoking the backend -> fabric put in transport_cmd_check_stop_to_fabric(). For good measure, also change core_tmr_release_req() to use list_del_init() ahead of se_tmr_req memory free. Reviewed-by:
Quinn Tran <quinn.tran@qlogic.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Nicholas Bellinger authored
commit febe562c upstream. This patch fixes a NULL pointer se_cmd->cmd_kref < 0 refcount bug during TMR LUN_RESET with active se_cmd I/O, that can be triggered during se_cmd descriptor shutdown + release via core_tmr_drain_state_list() code. To address this bug, add common __target_check_io_state() helper for ABORT_TASK + LUN_RESET w/ CMD_T_COMPLETE checking, and set CMD_T_ABORTED + obtain ->cmd_kref for both cases ahead of last target_put_sess_cmd() after TFO->aborted_task() -> transport_cmd_finish_abort() callback has completed. It also introduces SCF_ACK_KREF to determine when transport_cmd_finish_abort() needs to drop the second extra reference, ahead of calling target_put_sess_cmd() for the final kref_put(&se_cmd->cmd_kref). It also updates transport_cmd_check_stop() to avoid holding se_cmd->t_state_lock while dropping se_cmd device state via target_remove_from_state_list(), now that core_tmr_drain_state_list() is holding the se_device lock while checking se_cmd state from within TMR logic. Finally, move transport_put_cmd() release of SGL + TMR + extended CDB memory into target_free_cmd_mem() in order to avoid potential resource leaks in TMR ABORT_TASK + LUN_RESET code-paths. Also update target_release_cmd_kref() accordingly. Reviewed-by:
-
Bart Van Assche authored
commit 9ff9d15e upstream. This patch fixes the following kernel warning because it avoids that IRQs are disabled while ft_release_cmd() is invoked (fc_seq_set_resp() invokes spin_unlock_bh()): WARNING: CPU: 3 PID: 117 at kernel/softirq.c:150 __local_bh_enable_ip+0xaa/0x110() Call Trace: [<ffffffff814f71eb>] dump_stack+0x4f/0x7b [<ffffffff8105e56a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8105e65a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81062b2a>] __local_bh_enable_ip+0xaa/0x110 [<ffffffff814ff229>] _raw_spin_unlock_bh+0x39/0x40 [<ffffffffa03a7f94>] fc_seq_set_resp+0xe4/0x100 [libfc] [<ffffffffa02e604a>] ft_free_cmd+0x4a/0x90 [tcm_fc] [<ffffffffa02e6972>] ft_release_cmd+0x12/0x20 [tcm_fc] [<ffffffffa042bd66>] target_release_cmd_kref+0x56/0x90 [target_core_mod] [<ffffffffa042caf0>] target_put_sess_cmd+0xc0/0x110 [target_core_mod] [<ffffffffa042cb81>] transport_release_cmd+0x41/0x70 [target_core_mod] [<ffffffffa042d975>] transport_generic_free_cmd+0x35/0x420 [target_core_mod] Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Acked-by:
Joern Engel <joern@logfs.org> Reviewed-by:
Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Mathias Nyman authored
commit 5c821711 upstream. xhci driver frees data for all devices, both usb2 and and usb3 the first time usb_remove_hcd() is called, including td_list and and xhci_ring structures. When usb_remove_hcd() is called a second time for the second xhci bus it will try to dequeue all pending urbs, and touches td_list which is already freed for that endpoint. Reported-by:
Joe Lawrence <joe.lawrence@stratus.com> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Lu Baolu authored
commit ccc04afb upstream. Intel Broxton M was verifed to require XHCI_PME_STUCK_QUIRK quirk as well. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
commit 92149c93 upstream. XHCI_SSIC_PORT_UNUSED quirk was applied to the xHCI host controllers in some Intel SoC chips. With this quirk applied, SSIC port is set to "unused" prior to xhci_suspend(). This may cause problem if host fails to suspend. In this case, the port is set to unused without host further entering D3, and the port will not be usable anymore. Signed-off-by:
Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by:
-
Lu Baolu authored
commit 7e70cbff upstream. Two workarounds introduced by commit b8cb91e0 ("xhci: Workaround for PME stuck issues in Intel xhci") and commit abce329c ("xhci: Workaround to get D3 working in Intel xHCI") share a single quirk bit XHCI_PME_STUCK_QUIRK. These two workarounds actually are different and might happen on different hardwares. Need to separate them by adding a quirk bit for the later. Signed-off-by:
-
Lu Baolu authored
commit fa895377 upstream. Commit abce329c ("xhci: Workaround to get D3 working in Intel xHCI") adds a workaround for a limitation of PME storm caused by SSIC port in some Intel SoCs. This commit only handled one SSIC port, while there are actually two SSIC ports in the chips. This patch handles both SSIC ports. Without this fix, users still see PME storm. Signed-off-by:
-
Filipe Manana authored
commit 31314002 upstream. In the extent_same ioctl, we were grabbing the pages (locked) and attempting to read them without bothering about any concurrent IO against them. That is, we were not checking for any ongoing ordered extents nor waiting for them to complete, which leads to a race where the extent_same() code gets a checksum verification error when it reads the pages, producing a message like the following in dmesg and making the operation fail to user space with -ENOMEM: [18990.161265] BTRFS warning (device sdc): csum failed ino 259 off 495616 csum 685204116 expected csum 1515870868 Fix this by using btrfs_readpage() for reading the pages instead of extent_read_full_page_nolock(), which waits for any concurrent ordered extents to complete and locks the io range. Also do better error handling and don't treat all failures as -ENOMEM, as that's clearly misleasing, becoming identical to the checks and operation of prepare_uptodate_page(). The use of extent_read_full_page_nolock() was required before commit f4414602 ("btrfs: fix deadlock with extent-same and readpage"), as we had the range locked in an inode's io tree before attempting to read the pages. Fixes: f4414602 ("btrfs: fix deadlock with extent-same and readpage") Signed-off-by:
-
Filipe Manana authored
commit e0bd70c6 upstream. In the extent_same ioctl we are getting the pages for the source and target ranges and unlocking them immediately after, which is incorrect because later we attempt to map them (with kmap_atomic) and access their contents at btrfs_cmp_data(). When we do such access the pages might have been relocated or removed from memory, which leads to an invalid memory access. This issue is detected on a kernel with CONFIG_DEBUG_PAGEALLOC=y which produces a trace like the following: 186736.677437] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [186736.680382] Modules linked in: btrfs dm_flakey dm_mod ppdev xor raid6_pq sha256_generic hmac drbg ansi_cprng acpi_cpufreq evdev sg aesni_intel aes_x86_64 parport_pc ablk_helper tpm_tis psmouse parport i2c_piix4 tpm cryptd i2c_core lrw processor button serio_raw pcspkr gf128mul glue_helper loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [186736.681319] CPU: 13 PID: 10222 Comm: duperemove Tainted: G W 4.4.0-rc6-btrfs-next-18+ #1 [186736.681319] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [186736.681319] task: ffff880132600400 ti: ffff880362284000 task.ti: ffff880362284000 [186736.681319] RIP: 0010:[<ffffffff81264d00>] [<ffffffff81264d00>] memcmp+0xb/0x22 [186736.681319] RSP: 0018:ffff880362287d70 EFLAGS: 00010287 [186736.681319] RAX: 000002c002468acf RBX: 0000000012345678 RCX: 0000000000000000 [186736.681319] RDX: 0000000000001000 RSI: 0005d129c5cf9000 RDI: 0005d129c5cf9000 [186736.681319] RBP: ffff880362287d70 R08: 0000000000000000 R09: 0000000000001000 [186736.681319] R10: ffff880000000000 R11: 0000000000000476 R12: 0000000000001000 [186736.681319] R13: ffff8802f91d4c88 R14: ffff8801f2a77830 R15: ffff880352e83e40 [186736.681319] FS: 00007f27b37fe700(0000) GS:ffff88043dda0000(0000) knlGS:0000000000000000 [186736.681319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [186736.681319] CR2: 00007f27a406a000 CR3: 0000000217421000 CR4: 00000000001406e0 [186736.681319] Stack: [186736.681319] ffff880362287ea0 ffffffffa048d0bd 000000000009f000 0000000000001000 [186736.681319] 0100000000000000 ffff8801f2a77850 ffff8802f91d49b0 ffff880132600400 [186736.681319] 00000000000004f8 ffff8801c1efbe41 0000000000000000 0000000000000038 [186736.681319] Call Trace: [186736.681319] [<ffffffffa048d0bd>] btrfs_ioctl+0x24cb/0x2731 [btrfs] [186736.681319] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [186736.681319] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [186736.681319] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [186736.681319] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [186736.681319] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [186736.681319] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [186736.681319] Code: 0a 3c 6e 74 0d 3c 79 74 04 3c 59 75 0c c6 06 01 eb 03 c6 06 00 31 c0 eb 05 b8 ea ff ff ff 5d c3 55 31 c9 48 89 e5 48 39 d1 74 13 <0f> b6 04 0f 44 0f b6 04 0e 48 ff c1 44 29 c0 74 ea eb 02 31 c0 (gdb) list *(btrfs_ioctl+0x24cb) 0x5e0e1 is in btrfs_ioctl (fs/btrfs/ioctl.c:2972). 2967 dst_addr = kmap_atomic(dst_page); 2968 2969 flush_dcache_page(src_page); 2970 flush_dcache_page(dst_page); 2971 2972 if (memcmp(addr, dst_addr, cmp_len)) 2973 ret = BTRFS_SAME_DATA_DIFFERS; 2974 2975 kunmap_atomic(addr); 2976 kunmap_atomic(dst_addr); So fix this by making sure we keep the pages locked and respect the same locking order as everywhere else: get and lock the pages first and then lock the range in the inode's io tree (like for example at __btrfs_buffered_write() and extent_readpages()). If an ordered extent is found after locking the range in the io tree, unlock the range, unlock the pages, wait for the ordered extent to complete and repeat the entire locking process until no overlapping ordered extents are found. Signed-off-by:
-
Mark Fasheh authored
commit 293a8489 upstream. Clone and extent same lock their source and target inodes in opposite order. In addition to this, the range locking in clone doesn't take ordering into account. Fix this by having clone use the same locking helpers as btrfs-extent-same. In addition, I do a small cleanup of the locking helpers, removing a case (both inodes being the same) which was poorly accounted for and never actually used by the callers. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Matthew Wilcox authored
commit c6400ba7 upstream. of_hwspin_lock_get_id() is protected by the RCU lock, which means that insertions can occur simultaneously with the lookup. If the radix tree transitions from a height of 0, we can see a slot with the indirect_ptr bit set, which will cause us to at least read random memory, and could cause other havoc. Fix this by using the newly introduced radix_tree_iter_retry(). Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
-
Matthew Wilcox authored
commit 46437f9a upstream. If the indirect_ptr bit is set on a slot, that indicates we need to redo the lookup. Introduce a new function radix_tree_iter_retry() which forces the loop to retry the lookup by setting 'slot' to NULL and turning the iterator back to point at the problematic entry. This is a pretty rare problem to hit at the moment; the lookup has to race with a grow of the radix tree from a height of 0. The consequences of hitting this race are that gang lookup could return a pointer to a radix_tree_node instead of a pointer to whatever the user had inserted in the tree. Fixes: cebbd29e ("radix-tree: rewrite gang lookup using iterator") Signed-off-by:
-
Kirill A. Shutemov authored
commit 461c7fa1 upstream. Reduced testcase: #include <fcntl.h> #include <unistd.h> #include <sys/mman.h> #include <numaif.h> #define SIZE 0x2000 int main() { int fd; void *p; fd = open("/dev/sg0", O_RDWR); p = mmap(NULL, SIZE, PROT_EXEC, MAP_PRIVATE | MAP_LOCKED, fd, 0); mbind(p, SIZE, 0, NULL, 0, MPOL_MF_MOVE); return 0; } We shouldn't try to migrate pages in sg VMA as we don't have a way to update Sg_scatter_hold::pages accordingly from mm core. Let's mark the VMA as VM_IO to indicate to mm core that the VMA is not migratable. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: David Rientjes <rientjes@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Shiraz Hashim <shashim@codeaurora.org> Cc: Hugh Dickins <hughd@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: syzkaller <syzkaller@googlegroups.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Takashi Iwai authored
commit 7f0973e9 upstream. The port subscription code uses double mutex locks for source and destination ports, and this may become racy once when wrongly set up. It leads to lockdep warning splat, typically triggered by fuzzer like syzkaller, although the actual deadlock hasn't been seen, so far. This patch simplifies the handling by reducing to two single locks, so that no lockdep warning will be trigger any longer. By splitting to two actions, a still-in-progress element shall be added in one list while handling another. For ignoring this element, a new check is added in deliver_to_subscribers(). Along with it, the code to add/remove the subscribers list element was cleaned up and refactored. BugLink: http://lkml.kernel.org/r/CACT4Y+aKQXV7xkBW9hpQbzaDO7LrUvohxWh-UwMxXjDy-yBD=A@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit 81f57754 upstream. The rawmidi read and write functions manage runtime stream status such as runtime->appl_ptr and runtime->avail. These point where to copy the new data and how many bytes have been copied (or to be read). The problem is that rawmidi read/write call copy_from_user() or copy_to_user(), and the runtime spinlock is temporarily unlocked and relocked while copying user-space. Since the current code advances and updates the runtime status after the spin unlock/relock, the copy and the update may be asynchronous, and eventually runtime->avail might go to a negative value when many concurrent accesses are done. This may lead to memory corruption in the end. For fixing this race, in this patch, the status update code is performed in the same lock before the temporary unlock. Also, the spinlock is now taken more widely in snd_rawmidi_kernel_read1() for protecting more properly during the whole operation. BugLink: http://lkml.kernel.org/r/CACT4Y+b-dCmNf1GpgPKfDO0ih+uZCL2JV4__j-r1kdhPLSgQCQ@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit 06ab3003 upstream. A kernel WARNING in snd_rawmidi_transmit_ack() is triggered by syzkaller fuzzer: WARNING: CPU: 1 PID: 20739 at sound/core/rawmidi.c:1136 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82999e2d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50 [<ffffffff81352089>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482 [<ffffffff813522b9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515 [<ffffffff84f80bd5>] snd_rawmidi_transmit_ack+0x275/0x400 sound/core/rawmidi.c:1136 [<ffffffff84fdb3c1>] snd_virmidi_output_trigger+0x4b1/0x5a0 sound/core/seq/seq_virmidi.c:163 [< inline >] snd_rawmidi_output_trigger sound/core/rawmidi.c:150 [<ffffffff84f87ed9>] snd_rawmidi_kernel_write1+0x549/0x780 sound/core/rawmidi.c:1223 [<ffffffff84f89fd3>] snd_rawmidi_write+0x543/0xb30 sound/core/rawmidi.c:1273 [<ffffffff817b0323>] __vfs_write+0x113/0x480 fs/read_write.c:528 [<ffffffff817b1db7>] vfs_write+0x167/0x4a0 fs/read_write.c:577 [< inline >] SYSC_write fs/read_write.c:624 [<ffffffff817b50a1>] SyS_write+0x111/0x220 fs/read_write.c:616 [<ffffffff86336c36>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 Also a similar warning is found but in another path: Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82be2c0d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50 [<ffffffff81355139>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482 [<ffffffff81355369>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515 [<ffffffff8527e69a>] rawmidi_transmit_ack+0x24a/0x3b0 sound/core/rawmidi.c:1133 [<ffffffff8527e851>] snd_rawmidi_transmit_ack+0x51/0x80 sound/core/rawmidi.c:1163 [<ffffffff852d9046>] snd_virmidi_output_trigger+0x2b6/0x570 sound/core/seq/seq_virmidi.c:185 [< inline >] snd_rawmidi_output_trigger sound/core/rawmidi.c:150 [<ffffffff85285a0b>] snd_rawmidi_kernel_write1+0x4bb/0x760 sound/core/rawmidi.c:1252 [<ffffffff85287b73>] snd_rawmidi_write+0x543/0xb30 sound/core/rawmidi.c:1302 [<ffffffff817ba5f3>] __vfs_write+0x113/0x480 fs/read_write.c:528 [<ffffffff817bc087>] vfs_write+0x167/0x4a0 fs/read_write.c:577 [< inline >] SYSC_write fs/read_write.c:624 [<ffffffff817bf371>] SyS_write+0x111/0x220 fs/read_write.c:616 [<ffffffff86660276>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 In the former case, the reason is that virmidi has an open code calling snd_rawmidi_transmit_ack() with the value calculated outside the spinlock. We may use snd_rawmidi_transmit() in a loop just for consuming the input data, but even there, there is a race between snd_rawmidi_transmit_peek() and snd_rawmidi_tranmit_ack(). Similarly in the latter case, it calls snd_rawmidi_transmit_peek() and snd_rawmidi_tranmit_ack() separately without protection, so they are racy as well. The patch tries to address these issues by the following ways: - Introduce the unlocked versions of snd_rawmidi_transmit_peek() and snd_rawmidi_transmit_ack() to be called inside the explicit lock. - Rewrite snd_rawmidi_transmit() to be race-free (the former case). - Make the split calls (the latter case) protected in the rawmidi spin lock. BugLink: http://lkml.kernel.org/r/CACT4Y+YPq1+cYLkadwjWa5XjzF1_Vki1eHnVn-Lm0hzhSpu5PA@mail.gmail.com BugLink: http://lkml.kernel.org/r/CACT4Y+acG4iyphdOZx47Nyq_VHGbpJQK-6xNpiqUjaZYqsXOGw@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit 2154cc0e upstream. Mac Mini 7,1 model with CS4208 codec reports the headphone jack detection wrongly in an inverted way. Moreover, the advertised pins for the audio input and SPDIF output have actually no jack detection. This patch addresses these issues. The inv_jack_detect flag is set for fixing the headphone jack detection, and the pin configs for audio input and SPDIF output are marked as non-detectable. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105161 Report-and-tested-by: moosotc@gmail.com Signed-off-by:
-
